1 files changed, 78 insertions, 0 deletions
diff --git a/examples/nrf/src/bin/lora_p2p_report.rs b/examples/nrf/src/bin/lora_p2p_report.rs
new file mode 100644
index 00000000..d512b83f
--- /dev/null
+++ b/examples/nrf/src/bin/lora_p2p_report.rs
@@ -0,0 +1,78 @@
+//! This example runs on the RAK4631 WisBlock, which has an nRF52840 MCU and Semtech Sx126x radio.
+//! Other nrf/sx126x combinations may work with appropriate pin modifications.
+//! It demonstates LORA P2P functionality in conjunction with example lora_p2p_sense.rs.
+#![no_std]
+#![no_main]
+#![macro_use]
+#![allow(dead_code)]
+#![feature(type_alias_impl_trait)]
+
+use defmt::*;
+use embassy_executor::Spawner;
+use embassy_lora::sx126x::*;
+use embassy_nrf::gpio::{Input, Level, Output, OutputDrive, Pin as _, Pull};
+use embassy_nrf::{interrupt, spim};
+use embassy_time::{Duration, Timer};
+use lorawan_device::async_device::radio::{Bandwidth, CodingRate, PhyRxTx, RfConfig, SpreadingFactor};
+use {defmt_rtt as _, panic_probe as _};
+
+#[embassy_executor::main]
+async fn main(_spawner: Spawner) {
+    let p = embassy_nrf::init(Default::default());
+    let mut spi_config = spim::Config::default();
+    spi_config.frequency = spim::Frequency::M16;
+
+    let mut radio = {
+        let irq = interrupt::take!(SPIM1_SPIS1_TWIM1_TWIS1_SPI1_TWI1);
+        let spim = spim::Spim::new(p.TWISPI1, irq, p.P1_11, p.P1_13, p.P1_12, spi_config);
+
+        let cs = Output::new(p.P1_10.degrade(), Level::High, OutputDrive::Standard);
+        let reset = Output::new(p.P1_06.degrade(), Level::High, OutputDrive::Standard);
+        let dio1 = Input::new(p.P1_15.degrade(), Pull::Down);
+        let busy = Input::new(p.P1_14.degrade(), Pull::Down);
+        let antenna_rx = Output::new(p.P1_05.degrade(), Level::Low, OutputDrive::Standard);
+        let antenna_tx = Output::new(p.P1_07.degrade(), Level::Low, OutputDrive::Standard);
+
+        match Sx126xRadio::new(spim, cs, reset, antenna_rx, antenna_tx, dio1, busy, false).await {
+            Ok(r) => r,
+            Err(err) => {
+                info!("Sx126xRadio error = {}", err);
+                return;
+            }
+        }
+    };
+
+    let mut debug_indicator = Output::new(p.P1_03, Level::Low, OutputDrive::Standard);
+    let mut start_indicator = Output::new(p.P1_04, Level::Low, OutputDrive::Standard);
+
+    start_indicator.set_high();
+    Timer::after(Duration::from_secs(5)).await;
+    start_indicator.set_low();
+
+    loop {
+        let rf_config = RfConfig {
+            frequency: 903900000, // channel in Hz
+            bandwidth: Bandwidth::_250KHz,
+            spreading_factor: SpreadingFactor::_10,
+            coding_rate: CodingRate::_4_8,
+        };
+
+        let mut buffer = [00u8; 100];
+
+        // P2P receive
+        match radio.rx(rf_config, &mut buffer).await {
+            Ok((buffer_len, rx_quality)) => info!(
+                "RX received = {:?} with length = {} rssi = {} snr = {}",
+                &buffer[0..buffer_len],
+                buffer_len,
+                rx_quality.rssi(),
+                rx_quality.snr()
+            ),
+            Err(err) => info!("RX error = {}", err),
+        }
+
+        debug_indicator.set_high();
+        Timer::after(Duration::from_secs(2)).await;
+        debug_indicator.set_low();
+    }
+}