| Age | Commit message (Collapse) | Author |
|---|
|
This is quite hackish but it makes using the js REPL a lot nicer. :^)
|
|
|
|
|
|
|
|
|
|
|
|
It was possible to send signals to processes that you were normally not
allowed to send signals to, by calling ioctl(tty, TIOCSPGRP, targetpid)
and then generating one of the TTY-related signals on the calling
process's TTY (e.g by pressing ^C, ^Z, etc.)
|
|
|
|
This was causing the screen (on a real machine) to be split in half.
|
|
Suggested by Sergey. The currently running Thread and Process are now
Thread::current and Process::current respectively. :^)
|
|
|
|
|
|
|
|
Now that LibVT's backspace character (8) is non-destructive, the kernel
line editing code has to take care of erasing manually.
|
|
Background: DoubleBuffer is a handy buffer class in the kernel that
allows you to keep writing to it from the "outside" while the "inside"
reads from it. It's used for things like LocalSocket and TTY's.
Internally, it has a read buffer and a write buffer, but the two will
swap places when the read buffer is exhausted (by reading from it.)
Before this patch, it was internally implemented as two Vector<u8>
that we would swap between when the reader side had exhausted the data
in the read buffer. Now instead we preallocate a large KBuffer (64KB*2)
on DoubleBuffer construction and use that throughout its lifetime.
This removes all the kmalloc heap traffic caused by DoubleBuffers :^)
|
|
Previously, VFS::open() would only use the passed flags for permission checking
purposes, and Process::sys$open() would set them on the created FileDescription
explicitly. Now, they should be set by VFS::open() on any files being opened,
including files that the kernel opens internally.
This also lets us get rid of the explicit check for whether or not the returned
FileDescription was a preopen fd, and in fact, fixes a bug where a read-only
preopen fd without any other flags would be considered freshly opened (due to
O_RDONLY being indistinguishable from 0) and granted a new set of flags.
|
|
As suggested by Joshua, this commit adds the 2-clause BSD license as a
comment block to the top of every source file.
For the first pass, I've just added myself for simplicity. I encourage
everyone to add themselves as copyright holders of any file they've
added or modified in some significant way. If I've added myself in
error somewhere, feel free to replace it with the appropriate copyright
holder instead.
Going forward, all new source files should include a license header.
|
|
The kernel and its static data structures are no longer identity-mapped
in the bottom 8MB of the address space, but instead move above 3GB.
The first 8MB above 3GB are pseudo-identity-mapped to the bottom 8MB of
the physical address space. But things don't have to stay this way!
Thanks to Jesse who made an earlier attempt at this, it was really easy
to get device drivers working once the page tables were in place! :^)
Fixes #734.
|
|
SystemServer now pledges "tty" since it's used when spawning services.
|
|
|
|
This has been a FIXME for a long time. We now apply the provided
read/write permissions to the constructed FileDescription when opening
a File object via File::open().
|
|
|
|
Okay, one "dunce hat" point for me. The new PTY majors conflicted with
PATAChannel. Now they are 200 for master and 201 for slave, not used
by anything else.. I hope!
|
|
The 1st master pseudoterminal had the same device ID as /dev/psaux
which was caught by an assertion in Device VFS registration.
This would cause us to overwrite the PS/2 mouse device registration
which was definitely not good.
|
|
Turns out we can use abi::__cxa_demangle() for this, and all we need to
provide is sprintf(), realloc() and free(), so this patch exposes them.
We now have fully demangled C++ backtraces :^)
|
|
This reverts commit bd33c6627394b2166e1419965dd3b2d2dc0c401f.
This broke the network card drivers, since they depended on kmalloc
addresses being identity-mapped.
|
|
The kernel is now no longer identity mapped to the bottom 8MiB of
memory, and is now mapped at the higher address of `0xc0000000`.
The lower ~1MiB of memory (from GRUB's mmap), however is still
identity mapped to provide an easy way for the kernel to get
physical pages for things such as DMA etc. These could later be
mapped to the higher address too, as I'm not too sure how to
go about doing this elegantly without a lot of address subtractions.
|
|
Whatever this was supposed to be, it was ironically... not implemented.
|
|
Asking a File if we could possibly read or write it will never mutate
the asking FileDescription&, so it should be const.
|
|
Oops, we had a little mistake here. We were flushing whenever !NOFLSH,
not just when generating a signal.
This broke arrow keys in the terminal (you would only get A/B/C/D when
pressing arrow keys, instead of the full escape sequence.)
|
|
We now flush the input when we recieve a signal character.
This can be disabled using the newly implemented NOFLSH
attribute.
|
|
VirtualConsole::echo now actually echoes characters
instead of doing nothing.
|
|
Just fail with EIO in that case.
|
|
This makes tcgetpgrp() on a master PTY return the PGID of the slave PTY
which is probably what you are looking for. I'm not sure how correct or
standardized this is, but it makes sense to me right now.
|
|
The TTY driver now respects the ICANON flag, enabling basic line
editing like VKILL, VERASE, VEOF and VWERASE. Additionally,
ICANON is now set by default.
Basic echoing has can now be enabled via the ECHO flag, though
more complicated echoing like ECHOCTL or ECHONL has not been
implemented.
|
|
This reverts commit 1cca5142afbd76833deedfdb238230ac53424855.
This appears to be causing intermittent triple-faults and I don't know
why yet, so I'll just revert it to keep the tree in decent shape.
|
|
Background: DoubleBuffer is a handy buffer class in the kernel that
allows you to keep writing to it from the "outside" while the "inside"
reads from it. It's used for things like LocalSocket and PTY's.
Internally, it has a read buffer and a write buffer, but the two will
swap places when the read buffer is exhausted (by reading from it.)
Before this patch, it was internally implemented as two Vector<u8>
that we would swap between when the reader side had exhausted the data
in the read buffer. Now instead we preallocate a large KBuffer (64KB*2)
on DoubleBuffer construction and use that throughout its lifetime.
This removes all the kmalloc heap traffic caused by DoubleBuffers :^)
|
|
Less pressure on kmalloc heap.
|
|
Just going over some little unnecessary little kmalloc allocations.
|
|
|
|
This was a workaround to be able to build on case-insensitive file
systems where it might get confused about <string.h> vs <String.h>.
Let's just not support building that way, so String.h can have an
objectively nicer name. :^)
|
|
This papers over an immediate issue where pseudoterminals would choke
on more than 16 characters of pasted input in the GUI terminal.
Longer-term we should find a more elegant solution than using a static
size CircularQueue for this.
|
|
|
|
|
|
Unfortunately, that also means it can no longer inherit from SynthFS.
|
|
TTY::emit is called from an IRQ handler, and is used to push input data
into a buffer for later retrieval. Previously this was using DoubleBuffer,
but that class wants to take a lock. Our lock code wants to make sure
interrupts are enabled, but they're disabled while an IRQ handler is
running. This made the kernel sad, but this CircularQueue cheers it up by
avoiding the lock requirement completely.
|
|
|
|
|
|
|
|
It's not valid for a FileDescription to not have a file, so let's
disallow it by taking a File& (or FIFO&) in the constructor.
|
