| Age | Commit message (Collapse) | Author |
|---|
|
This also removes a lot of CPU.h includes infavor for Sections.h
|
|
If we are in a shared interrupt handler, the called handlers might
indicate it was not their interrupt, so we should not increment the
call counter of these handlers.
|
|
This makes error propagation less cumbersome (and also exposed some
places where we were not doing it.)
|
|
The time_elapsed variable would count until milliseconds_timeout + 1,
so a != comparision won't work.
|
|
The overall design is the same, but we change a few things,
like decreasing the amount of blocking forever loops. The goal
is to ensure the kernel won't hang forever when dealing with
buggy hardware.
Also, we reset the channel when initializing it, just in case the
hardware was in bad state before we start use it.
|
|
|
|
This makes it more symmetrical with adopt_own() (which is used to
create a NonnullOwnPtr from the result of a naked new.)
|
|
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
|
|
|
|
We need to do it to let real hardware to put the correct voltages
on the wire.
Apparently my ICH7 machine refused to boot, and was reading lots of
garbage from an unconnected IDE channel. It was fixed after I added a
delay of 20 microseconds. It probably can be reduced, I just took a safe
value and it seems to work correctly without any problems :)
|
|
Also handle native and compatibility channel modes together, so if only
one IDE channel was set to work on PCI native mode, we need to handle it
separately, so the other channel continue to operate with the legacy IO
ports and interrupt line.
|
|
This change should make it less possible for race conditions to happen
and cause fatal errors when accessing the hardware.
|
|
Although unlikely to happen, a user can have an IDE controller that
doesn't support bus master capability. If that's the case, we need to
check for this, and create an IDEChannel (not BMIDEChannel) to allow
IO operations with the controller.
|
|
If the user requests to force PIO mode, we just create IDEChannel
objects which are capable of sending PIO commands only.
However, if the user doesn't force PIO mode, we create BMIDEChannel
objects, which are sending DMA commands.
This change is somewhat simplifying the code, so each class is
supporting its type of operation - PIO or DMA. The PATADiskDevice
should not care if DMA is enabled or not.
Later on, we could write an IDEChannel class for UDMA modes,
that are available and documented on Intel specifications for their IDE
controllers.
|
|
Technically not supported by the original ATA specification, IDE
hot swapping is still in practice possible, so the only sane way
to start support it is with ref-counting the IDEChannel object so if we
remove a PATADiskDevice, it's not gone with it.
|
|
An article about IDE limits states that:
"Hard drives over 8.4 GB are supposed to report their geometry as
16383/16/63. This in effect means that the `geometry' is obsolete, and
the total disk size can no longer be computed from the geometry, but is
found in the LBA capacity field returned by the IDENTIFY command.
Hard drives over 137.4 GB are supposed to report an LBA capacity of
0xfffffff = 268435455 sectors (137438952960 bytes). Now the actual disk
size is found in the new 48-capacity field."
(https://tldp.org/HOWTO/Large-Disk-HOWTO-4.html) which is the main
reason to not support CHS as harddrives with less than 8.4 GB capacity
are completely obsolete.
Another good reason is that virtually any harddrive in the last 20 years
or so, supports LBA mode. Therefore, it's probably OK to just ignore CHS
as it's unlikely to encounter a harddrive that doesn't support LBA.
This is somewhat simplifying the IDE initialization and access code.
Also, we should use the ATAIdentifyBlock structure if possible,
so now we do it instead of using macros to calculate offsets.
With the usage of the ATAIdentifyBlock structure, we now use the
48-bit LBA max count if the drive indicates it supports 48-bit LBA mode.
|
|
We can't use deferred functions for anything that may require preemption,
such as copying from/to user or accessing the disk. For those purposes
we should use a work queue, which is essentially a kernel thread that
may be preempted or blocked.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
|
|
|
|
Replacement made by `find Kernel Userland -name '*.h' -o -name '*.cpp' | sed -i -Ee 's/dbgln\b<(\w+)>\(/dbgln_if(\1, /g'`
|
|
Calling detect_disks() can generate interrupts, so we must clear it to
allow proper function when booting with kernel argument smp=on.
|
|
This change can be actually seen as two logical changes, the first
change is about to ensure we only read the ATA Status register only
once, because if we read it multiple times, we acknowledge interrupts
unintentionally. To solve this issue, we always use the alternate Status
register and only read the original status register in the IRQ handler.
The second change is how we handle interrupts - if we use DMA, we can
just complete the request and return from the IRQ handler. For PIO mode,
it's more complicated. For PIO write operation, after setting the ATA
registers, we send out the data to IO port, and wait for an interrupt.
For PIO read operation, we set the ATA registers, and wait for an
interrupt to fire, then we just read from the data IO port.
|
|
This replaces the current disk detection and disk access code with
code based on https://wiki.osdev.org/IDE
This allows the system to boot on VirtualBox with serial debugging
enabled and VMWare Player.
I believe there were several issues with the current code:
- It didn't utilise the last 8 bits of the LBA in 24-bit mode.
- {read,write}_sectors_with_dma was not setting the obsolete bits,
which according to OSdev wiki aren't used but should be set.
- The PIO and DMA methods were using slightly different copy
and pasted access code, which is now put into a single
function called "ata_access"
- PIO mode doesn't work. This doesn't fix that and should
be looked into in the future.
- The detection code was not checking for ATA/ATAPI.
- The detection code accidentally had cyls/heads/spt as 8-bit,
when they're 16-bit.
- The capabilities of the device were not considered. This is now
brought in and is currently used to check if the device supports
LBA. If not, use CHS.
|
|
This was done with the following script:
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/dbgln<debug_([a-z_]+)>/dbgln<\U\1_DEBUG>/' {} \;
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/if constexpr \(debug_([a-z0-9_]+)/if constexpr \(\U\1_DEBUG/' {} \;
|
|
It would be tempting to uncomment these statements, but that won't work
with the new changes.
This was done with the following commands:
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec awk -i inplace '$0 !~ /\/\/#define/ { if (!toggle) { print; } else { toggle = !toggle } } ; $0 ~/\/\/#define/ { toggle = 1 }' {} \;
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec awk -i inplace '$0 !~ /\/\/ #define/ { if (!toggle) { print; } else { toggle = !toggle } } ; $0 ~/\/\/ #define/ { toggle = 1 }' {} \;
|
|
This was done with the help of several scripts, I dump them here to
easily find them later:
awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in
for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in)
do
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \;
done
# Remember to remove WRAPPER_GERNERATOR_DEBUG from the list.
awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
|
|
These changes are arbitrarily divided into multiple commits to make it
easier to find potentially introduced bugs with git bisect.
|
|
These changes are arbitrarily divided into multiple commits to make it
easier to find potentially introduced bugs with git bisect.Everything:
|
|
These changes are arbitrarily divided into multiple commits to make it
easier to find potentially introduced bugs with git bisect.Everything:
The modifications in this commit were automatically made using the
following command:
find . -name '*.cpp' -exec sed -i -E 's/dbg\(\) << ("[^"{]*");/dbgln\(\1\);/' {} \;
|
|
This was a non-standard specifier alias for %02x. This patch replaces
all uses of it with new-style formatting functions instead.
|
|
Also, change device() method to be const.
|
|
We now use major number 3, and the minor number is set to 0 or 2 if
initialized on the primary channel, otherwise 1 or 3 on the secondary
channel.
|
|
This new subsystem is somewhat replacing the IDE disk code we had with a
new flexible design.
StorageDevice is a generic class that represent a generic storage
device. It is meant that specific storage hardware will override the
interface. StorageController is a generic class that represent
a storage controller that can be found in a machine.
The IDEController class governs two IDEChannels. An IDEChannel is
responsible to manage the master & slave devices of the channel,
therefore an IDEChannel is an IRQHandler.
|
