| Age | Commit message (Collapse) | Author |
|---|
|
This makes the user-facing type only take the node member pointer, and
lets the compiler figure out the other needed types from that.
|
|
(Instead of hand-wrapping { data(), size() } in a bunch of places.)
|
|
|
|
Read the appropriate registers for RTL8139, RTL8168 and E1000.
For NE2000 just assume 10mbit full duplex as there is no indicator
for it in the pure NE2000 spec. Mock values for loopback.
|
|
|
|
|
|
Instead of initializing network adapters in init.cpp, let's move that
logic into a separate class to handle this.
Also, it seems like a good idea to shift responsiblity on enumeration
of network adapters after the boot process, so this singleton will take
care of finding the appropriate network adapter when asked to with an
IPv4 address or interface name.
With this change being merged, we simplify the creation logic of
NetworkAdapter derived classes, so we enumerate the PCI bus only once,
searching for driver candidates when doing so, and we let each driver
to test if it is resposible for the specified PCI device.
|
|
This was broken by b436dd1.
|
|
Previously we'd allocate buffers when sending packets. This patch
avoids these allocations by using the NetworkAdapter's packet queue.
At the same time this also avoids copying partially constructed
packets in order to prepend Ethernet and/or IPv4 headers. It also
properly truncates UDP and raw IP packets.
|
|
|
|
There's no good reason to distinguish between network interfaces based
on their model. It's probably a good idea to try keep the names more
persistent so scripts written for a specific network interface will be
useable after hotplug event (or after rebooting with new hardware
setup).
|
|
This avoids two allocations when receiving network packets. One for
inserting a PacketWithTimestamp into m_packet_queue and another one
when inserting buffers into the list of unused packet buffers.
With this fixed the only allocations in NetworkTask happen when
initially allocating the PacketWithTimestamp structs and when switching
contexts.
|
|
|
|
This avoids allocations for initializing the Function<T>
for the NetworkAdapter::for_each callback argument.
Applying this patch decreases CPU utilization for NetworkTask
from 40% to 28% when receiving TCP packets at a rate of 100Mbit/s.
|
|
Previously we'd use the adapter's address as the source address
when sending packets. Instead we should use the socket's bound local
address.
|
|
This fixes an OOM when hitting the VM with lots of UDP packets.
fixes #6907
|
|
The last IP address in an IPv4 subnet is considered the directed
broadcast address, e.g. for 192.168.3.0/24 the directed broadcast
address is 192.168.3.255. We need to consider this address as
belonging to the interface.
Here's an example with this fix applied, SerenityOS has 192.168.3.190:
[gunnar@nyx ~]$ ping -b 192.168.3.255
WARNING: pinging broadcast address
PING 192.168.3.255 (192.168.3.255) 56(84) bytes of data.
64 bytes from 192.168.3.175: icmp_seq=1 ttl=64 time=0.950 ms
64 bytes from 192.168.3.188: icmp_seq=1 ttl=64 time=2.33 ms
64 bytes from 192.168.3.46: icmp_seq=1 ttl=64 time=2.77 ms
64 bytes from 192.168.3.41: icmp_seq=1 ttl=64 time=4.15 ms
64 bytes from 192.168.3.190: icmp_seq=1 ttl=64 time=29.4 ms
64 bytes from 192.168.3.42: icmp_seq=1 ttl=64 time=30.8 ms
64 bytes from 192.168.3.55: icmp_seq=1 ttl=64 time=31.0 ms
64 bytes from 192.168.3.30: icmp_seq=1 ttl=64 time=33.2 ms
64 bytes from 192.168.3.31: icmp_seq=1 ttl=64 time=33.2 ms
64 bytes from 192.168.3.173: icmp_seq=1 ttl=64 time=41.7 ms
64 bytes from 192.168.3.43: icmp_seq=1 ttl=64 time=47.7 ms
^C
--- 192.168.3.255 ping statistics ---
1 packets transmitted, 1 received, +10 duplicates, 0% packet loss,
time 0ms, rtt min/avg/max/mdev = 0.950/23.376/47.676/16.539 ms
[gunnar@nyx ~]$
|
|
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
|
|
|
|
|
|
Since the receiving socket isn't yet known at packet receive time,
keep timestamps for all packets.
This is useful for keeping statistics about in-kernel queue latencies
in the future, and it can be used to implement SO_TIMESTAMP.
|
|
Since the CPU already does almost all necessary validation steps
for us, we don't really need to attempt to do this. Doing it
ourselves doesn't really work very reliably, because we'd have to
account for other processors modifying virtual memory, and we'd
have to account for e.g. pages not being able to be allocated
due to insufficient resources.
So change the copy_to/from_user (and associated helper functions)
to use the new safe_memcpy, which will return whether it succeeded
or not. The only manual validation step needed (which the CPU
can't perform for us) is making sure the pointers provided by user
mode aren't pointing to kernel mappings.
To make it easier to read/write from/to either kernel or user mode
data add the UserOrKernelBuffer helper class, which will internally
either use copy_from/to_user or directly memcpy, or pass the data
through directly using a temporary buffer on the stack.
Last but not least we need to keep syscall params trivial as we
need to copy them from/to user mode using copy_from/to_user.
|
|
|
|
|
|
This adds IPv4 fragmentation, so now we can send huuuuuuge packets
properly.
|
|
Let's rip off the band-aid
|
|
|
|
The idea behind WeakPtr<NetworkAdapter> was to support hot-pluggable
network adapters, but on closer thought, that's super impractical so
let's not go down that road.
|
|
|
|
As suggested by Joshua, this commit adds the 2-clause BSD license as a
comment block to the top of every source file.
For the first pass, I've just added myself for simplicity. I encourage
everyone to add themselves as copyright holders of any file they've
added or modified in some significant way. If I've added myself in
error somewhere, feel free to replace it with the appropriate copyright
holder instead.
Going forward, all new source files should include a license header.
|
|
The majority of the time in NetworkTask was being spent in allocating
and deallocating KBuffers for each incoming packet.
We'll now keep up to 100 buffers around and reuse them for new packets
if the next incoming packet fits in an old buffer. This is pretty
naively implemented but definitely cuts down on time spent here.
|
|
This defaults to 1500 for all adapters, but LoopbackAdapter increases
it to 65536 on construction.
If an IPv4 packet is larger than the MTU, we'll need to break it into
smaller fragments before transmitting it. This part is a FIXME. :^)
|
|
This allows userspace programs to get and set (superuser-only) the IPv4
address of a network adapter. :^)
|
|
Made getsockopt() and setsockopt() virtual so we can handle them in the
various Socket subclasses. The subclasses map kinda nicely to "levels".
This will allow us to implement things like "traceroute", although..
I spent some time trying to do that, but then hit a wall when it turned
out that the user-mode networking in QEMU doesn't preserve TTL in the
ICMP packets passing through.
|
|
|
|
|
|
|
|
|
|
|
|
This is comprised of five small changes:
* Keep a counter for tx/rx packets/bytes per TCP socket
* Keep a counter for tx/rx packets/bytes per network adapter
* Expose that data in /proc/net_tcp and /proc/netadapters
* Convert /proc/netadapters to JSON
* Fix up ifconfig to read the JSON from netadapters
|
|
A KBuffer always contains a valid KBufferImpl. If you need a "null"
state buffer, use Optional<KBuffer>.
This makes KBuffer very easy to work with and pass around, just like
ByteBuffer before it.
|
|
There's no need for send_ipv4() to take a ByteBuffer&&, the data is
immediately cooked into a packet and transmitted. Instead, just pass
it the address+length of whatever buffer we've been using locally.
The more we can reduce the pressure on kmalloc the better. :^)
|
|
This further reduces pressure on the kmalloc heap. :^)
|
|
Replace the class-based snooze alarm mechanism with a per-thread callback.
This makes it easy to block the current thread on an arbitrary condition:
void SomeDevice::wait_for_irq() {
m_interrupted = false;
current->block_until([this] { return m_interrupted; });
}
void SomeDevice::handle_irq() {
m_interrupted = true;
}
Use this in the SB16 driver, and in NetworkTask :^)
|
|
These types can be picked up by including <AK/Types.h>:
* u8, u16, u32, u64 (unsigned)
* i8, i16, i32, i64 (signed)
|
|
Added a simple /bin/ifconfig program that just pretty-prints that file. :^)
|
|
Also run it across the whole tree to get everything using the One True Style.
We don't yet run this in an automated fashion as it's a little slow, but
there is a snippet to do so in makeall.sh.
|
|
|
