| Age | Commit message (Collapse) | Author |
|---|
|
To do this we also need to get rid of LockRefPtrs in the USB code as
well.
Most of the SysFS nodes are statically generated during boot and are not
mutated afterwards.
The same goes for general device code - once we generate the appropriate
SysFS nodes, we almost never mutate the node pointers afterwards, making
locking unnecessary.
|
|
This patch switches away from {Nonnull,}LockRefPtr to the non-locking
smart pointers throughout the kernel.
I've looked at the handful of places where these were being persisted
and I don't see any race situations.
Note that the process file descriptor table (Process::m_fds) was already
guarded via MutexProtected.
|
|
Instead of just returning nothing, let's return Error or nothing.
This would help later on with error propagation in case of failure
during this method.
This also makes us more paranoid about failure in this method, so when
initializing a DisplayConnector we safely tear down the internal members
of the object. This applies the same for a StorageDevice object, but its
after_inserting method is much smaller compared to the DisplayConnector
overriden method.
|
|
We really don't want callers of this function to accidentally change
the jail, or even worse - remove the Process from an attached jail.
To ensure this never happens, we can just declare this method as const
so nobody can mutate it this way.
|
|
From now on, we don't allow jailed processes to open all device nodes in
/dev, but only allow jailed processes to open /dev/full, /dev/zero,
/dev/null, and various TTY and PTY devices (and not including virtual
consoles) so we basically restrict applications to what they can do when
they are in jail.
The motivation for this type of restriction is to ensure that even if a
remote code execution occurred, the damage that can be done is very
small.
We also don't restrict reading and writing on device nodes that were
already opened, because that limit seems not useful, especially in the
case where we do want to provide an OpenFileDescription to such device
but nothing further than that.
|
|
|
|
It is starting to get a little messy with how each device can try to add
or remove itself to either /sys/dev/block or /sys/dev/char directories.
To better do this, we introduce 4 virtual methods to take care of that,
so until we ensure all nodes in /sys/dev/block and /sys/dev/char are
actual symlinks, we allow the Device base class to call virtual methods
upon insertion or before being destroying, so it add itself elegantly to
either of these directories or remove itself when needed.
For special cases where we need to create symlinks, we have two virtual
methods to be called otherwise to do almost the same thing mentioned
before, but to use symlinks instead.
|
|
These methods are essentially splitted from the after_inserting method
and the will_be_destroyed method so later on we can allow Storage
devices to override the after_inserting method and the will_be_destroyed
method while still being able to use shared functionality as before,
such as adding the device to and removing it from the device list.
|
|
Instead, let the /sys/dev/block and /sys/dev/char directories to handle
the registering part of SysFSDeviceComponents by themselves.
|
|
|
|
|
|
This will allow File and it's descendants to use RefCounted instead of
having a custom implementation of unref. (Since RefCounted calls
will_be_destroyed automatically)
This commit also removes an erroneous call to `before_removing` in
AHCIPort, this is a duplicate call, as the only reference to the device
is immediately dropped following the call, which in turns calls
`before_removing` via File::unref.
|
|
We can now directly create formatted KStrings with KString::formatted.
:^)
|
|
This helps avoid confusion in general, and make constructors, methods
and code patterns much more clean and understandable.
|
|
Instead, allocate before constructing the object and pass NonnullOwnPtr
of KString to the object if needed. Some classes can determine their
names as they have a known attribute to look for or have a static name.
|
|
|
|
This patch adds the FileSystemID type, which is a distinct u32.
This prevents accidental conversion from arbitrary integers.
|
|
This allows us to propagate errors from inside the callback with TRY().
|
|
We now use AK::Error and AK::ErrorOr<T> in both kernel and userspace!
This was a slightly tedious refactoring that took a long time, so it's
not unlikely that some bugs crept in.
Nevertheless, it does pass basic functionality testing, and it's just
real nice to finally see the same pattern in all contexts. :^)
|
|
Found due to smelly code in InodeFile::absolute_path.
In particular, this replaces the following misleading methods:
File::absolute_path
This method *never* returns an actual path, and if called on an
InodeFile (which is impossible), it would VERIFY_NOT_REACHED().
OpenFileDescription::try_serialize_absolute_path
OpenFileDescription::absolute_path
These methods do not guarantee to return an actual path (just like the
other method), and just like Custody::absolute_path they do not
guarantee accuracy. In particular, just renaming the method made a
TOCTOU bug obvious.
The new method signatures use KResultOr, just like
try_serialize_absolute_path() already did.
|
|
This singleton simplifies many aspects that we struggled with before:
1. There's no need to make derived classes of Device expose the
constructor as public anymore. The singleton is a friend of them, so he
can call the constructor. This solves the issue with try_create_device
helper neatly, hopefully for good.
2. Getting a reference of the NullDevice is now being done from this
singleton, which means that NullDevice no longer needs to use its own
singleton, and we can apply the try_create_device helper on it too :)
3. We can now defer registration completely after the Device constructor
which means the Device constructor is merely assigning the major and
minor numbers of the Device, and the try_create_device helper ensures it
calls the after_inserting method immediately after construction. This
creates a great opportunity to make registration more OOM-safe.
|
|
Instead of doing so in the constructor, let's do immediately after the
constructor, so we can safely pass a reference of a Device, so the
SysFSDeviceComponent constructor can use that object to identify whether
it's a block device or a character device.
This allows to us to not hold a device in SysFSDeviceComponent with a
RefPtr.
Also, we also call the before_removing method in both SlavePTY::unref
and File::unref, so because Device has that method being overrided, it
can ensure the device is removed always cleanly.
|
|
These files are not marked as block devices or character devices so they
are not meant to be used as device nodes. The filenames are formatted to
the pattern "major:minor", but a Userland program need to call the parse
these format and inspect the the major and minor numbers and create the
real device nodes in /dev.
Later on, it might be a good idea to ensure we don't create new
SysFSComponents on the heap for each Device, but rather generate
them only when required (and preferably to not create a SysFSComponent
at all if possible).
|
|
Devices might be removed and inserted at anytime, so let's ensure we
always do these kind of operations with a good known state of the
HashMap.
The VirtIO code was modified to create devices outside the IRQ handler,
so now it works with the new locking of the devices singleton, but a
better approach might be needed later on.
|
|
These methods are no longer needed because SystemServer is able to
populate the DevFS on its own.
Device absolute_path no longer assume a path to the /dev location,
because it really should not assume any path to a Device node.
Because StorageManagement still needs to know the storage name, we
declare a virtual method only for StorageDevices to override, but this
technique should really be removed later on.
|
|
Dr. POSIX really calls these "open file description", not just
"file description", so let's call them exactly that. :^)
|
|
This matches MutexLocker, and doesn't sound like it's a lock itself.
|
|
|
|
|
|
|
|
This hack allows self-test mode run-tests-and-shutdown.sh to give
TestProcFs a stat(2)-able /proc/self/fd/0. For some reason, when
stdin is a SerialDevice, /proc/self/fd/0 will be a symlink to the device
as expected, but, calling realpath or stat on /proc/self/fd/0 will error
out. realpath will give the string from Device::absolute_path() which
would be something like "device:4,64 (SerialDevice)". When VFS is trying
to resolve_path so that we can stat the file, it would bail out on this
fake-y path.
Change the fake path (that doesn't show up when you ls a device, nor
when checking the devices tab in SystemMonitor) from the major/minor
device number and class_name() to /dev/device_name(). There's probably
a very hairy yak standing behind this issue that was only discovered due
to the ProcFS rework.
|
|
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
|
|
|
|
(...and ASSERT_NOT_REACHED => VERIFY_NOT_REACHED)
Since all of these checks are done in release builds as well,
let's rename them to VERIFY to prevent confusion, as everyone is
used to assertions being compiled out in release.
We can introduce a new ASSERT macro that is specifically for debug
checks, but I'm doing this wholesale conversion first since we've
accumulated thousands of these already, and it's not immediately
obvious which ones are suitable for ASSERT.
|
|
|
|
These changes are arbitrarily divided into multiple commits to make it
easier to find potentially introduced bugs with git bisect.Everything:
|
|
This makes the Scheduler a lot leaner by not having to evaluate
block conditions every time it is invoked. Instead evaluate them as
the states change, and unblock threads at that point.
This also implements some more waitid/waitpid/wait features and
behavior. For example, WUNTRACED and WNOWAIT are now supported. And
wait will now not return EINTR when SIGCHLD is delivered at the
same time.
|
|
This allows issuing asynchronous requests for devices and waiting
on the completion of the request. The requests can cascade into
multiple sub-requests.
Since IRQs may complete at any time, if the current process is no
longer the same that started the process, we need to swich the
paging context before accessing user buffers.
Change the PATA driver to use this model.
|
|
This reverts commit 2fd5ce1eb06e5cbbb180cba64a567e99f0cd846c.
This broke booting without SMP. (PR was #3921)
|
|
This allows issuing asynchronous requests for devices and waiting
on the completion of the request. The requests can cascade into
multiple sub-requests.
Since IRQs may complete at any time, if the current process is no
longer the same that started the process, we need to swich the
paging context before accessing user buffers.
Change the PATA driver to use this model.
|
|
MemoryManager cannot use the Singleton class because
MemoryManager::initialize is called before the global constructors
are run. That caused the Singleton to be re-initialized, causing
it to create another MemoryManager instance.
Fixes #3226
|
|
This reverts commit f48feae0b2a300992479abf0b2ded85e45ac6045.
|
|
This reverts commit f0906250a181c831508a45434b9f645ff98f33e4.
|
|
This reverts commit 5a98e329d157a2db8379e0c97c6bdc1328027843.
|
|
Just default the InitFunction template argument.
|
|
|
|
Fixes #3226
|
|
|
|
This reverts commit 6c72736b26a81a8f03d8dd47989bfffe26bb1c95.
I am unable to boot on my home machine with this change in the tree.
|
|
System components that need an IRQ handling are now inheriting the
InterruptHandler class.
In addition to that, the initialization process of PATAChannel was
changed to fit the changes.
PATAChannel, E1000NetworkAdapter and RTL8139NetworkAdapter are now
inheriting from PCI::Device instead of InterruptHandler directly.
|
