| Age | Commit message (Collapse) | Author |
|---|
|
|
|
There are a few violations with signal handling that I won't be able to
fix it until later this week. So lets put lock rank enforcement under a
debug option for now so other folks don't hit these crashes until rank
enforcement is more fleshed out.
|
|
This should help prevent deadlocks where a thread blocks on a Mutex
while interrupts are disabled, and makes it impossible for the holder of
the Mutex to make forward progress because it cannot be scheduled in.
Hide it behind a new debug macro LOCK_IN_CRITICAL_DEBUG for now, because
Ext2FS takes a series of Mutexes from the page fault handler, which
executes with interrupts disabled.
|
|
This commit implements the ISO 9660 filesystem as specified in ECMA 119.
Currently, it only supports the base specification and Joliet or Rock
Ridge support is not present. The filesystem will normalize all
filenames to be lowercase (same as Linux).
The filesystem can be mounted directly from a file. Loop devices are
currently not supported by SerenityOS.
Special thanks to Lubrsi for testing on real hardware and providing
profiling help.
Co-Authored-By: Luke <luke.wilde@live.co.uk>
|
|
These are the actual structures that allow USB to work (i.e the ones
actually defined in the specification). This should provide us enough
of a baseline implementation that we can build on to support
different types of USB device.
|
|
These are pretty common on older LGA1366 & LGA1150 motherboards.
NOTE: Since the registers datasheets for all versions of the chip
besides versions 1 - 3 are still under NDAs i had to collect
several "magical vendor constants" from the *BSD driver and the
linux driver that i was not able to name verbosely, and as such
these are labeled with the comment "vendor magic values".
|
|
We call it E1000E, because the layout for these cards is somewhat not
the same like E1000 supported cards.
Also, this card supports advanced features that are not supported on
8254x cards.
|
|
It seems like overly-specific classes were written for no good reason.
Instead of making each adapter to have its own unique FramebufferDevice
class, let's generalize everything to keep implementation more
consistent.
|
|
As we removed the support of VBE modesetting that was done by GRUB early
on boot, we need to determine if we can modeset the resolution with our
drivers, and if not, we should enable text mode and ensure that
SystemServer knows about it too.
Also, SystemServer should first check if there's a framebuffer device
node, which is an indication that text mode was not even if it was
requested. Then, if it doesn't find it, it should check what boot_mode
argument the user specified (in case it's self-test). This way if we
try to use bochs-display device (which is not VGA compatible) and
request a text mode, it will not honor the request and will continue
with graphical mode.
Also try to print critical messages with mininum memory allocations
possible.
In LibVT, We make the implementation flexible for kernel-specific
methods that are implemented in ConsoleImpl class.
|
|
We simply modeset the resolution after determining the preferred
resolution after getting the EDID from the attached display.
|
|
Ideally we would never allocate under a spinlock, as it has many
performance and potentially functionality (deadlock) pitfalls.
We violate that rule in many places today, but we need a tool to track
them all down and fix them. This change introduces a new macro option
named `KMALLOC_VERIFY_NO_SPINLOCK_HELD` which can catch these
situations at runtime via an assert.
|
|
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
|
|
Based on pull #3236 by tomuta, this adds helper methods for generic
device initialization, and partily-broken virtqueue helper methods
Co-authored-by: Tom <tomut@yahoo.com>
Co-authored-by: Sahan <sahan.h.fernando@gmail.com>
|
|
The end goal of this commit is to allow to boot on bare metal with no
PS/2 device connected to the system. It turned out that the original
code relied on the existence of the PS/2 keyboard, so VirtualConsole
called it even though ACPI indicated the there's no i8042 controller on
my real machine because I didn't plug any PS/2 device.
The code is much more flexible, so adding HID support for other type of
hardware (e.g. USB HID) could be much simpler.
Briefly describing the change, we have a new singleton called
HIDManagement, which is responsible to initialize the i8042 controller
if exists, and to enumerate its devices. I also abstracted a bit
things, so now every Human interface device is represented with the
HIDDevice class. Then, there are 2 types of it - the MouseDevice and
KeyboardDevice classes; both are responsible to handle the interface in
the DevFS.
PS2KeyboardDevice, PS2MouseDevice and VMWareMouseDevice classes are
responsible for handling the hardware-specific interface they are
assigned to. Therefore, they are inheriting from the IRQHandler class.
|
|
|
|
The system is extremely sensitive to heap allocations during heap
expansion. This was causing frequent OOM panics under various loads.
Work around the issue for now by putting the logging behind
KMALLOC_DEBUG. Ideally dmesgln() & friends would not reqiure any
heap allocations, but we're not there right now.
Fixes #5724.
|
|
|
|
The hierarchy is AHCIController, AHCIPortHandler, AHCIPort and
SATADiskDevice. Each AHCIController has at least one AHCIPortHandler.
An AHCIPortHandler is an interrupt handler that takes care of
enumeration of handled AHCI ports when an interrupt occurs. Each
AHCIPort takes care of one SATADiskDevice, and later on we can add
support for Port multiplier.
When we implement support of Message signalled interrupts, we can spawn
many AHCIPortHandlers, and allow each one of them to be responsible for
a set of AHCIPorts.
|
|
This was a thing back when the system was so little that any kernel
allocation above 1 MiB was basically guaranteed to be a bug. :^)
|
|
Remember, friends don't let friends use NE2000 network cards :^)
|
|
Leaking macros across headers is a terrible thing, but I can't think of
a better way of achieving this.
- We need some way of modifying debug macros from CMake to implement
ENABLE_ALL_THE_DEBUG_MACROS.
- We need some way of modifying debug macros in specific source files
because otherwise we need to rebuild too many files.
This was done using the following script:
sed -i -E 's/#cmakedefine01 ([A-Z0-9_]+)/#ifndef \1\n\0\n#endif\n/' AK/Debug.h.in
sed -i -E 's/#cmakedefine01 ([A-Z0-9_]+)/#ifndef \1\n\0\n#endif\n/' Kernel/Debug.h.in
|
|
The following script was used to make these changes:
#!/bin/bash
set -e
tmp=$(mktemp -d)
echo "tmp=$tmp"
find Kernel \( -name '*.cpp' -o -name '*.h' \) | sort > $tmp/Kernel.files
find . \( -path ./Toolchain -prune -o -path ./Build -prune -o -path ./Kernel -prune \) -o \( -name '*.cpp' -o -name '*.h' \) -print | sort > $tmp/EverythingExceptKernel.files
cat $tmp/Kernel.files | xargs grep -Eho '[A-Z0-9_]+_DEBUG' | sort | uniq > $tmp/Kernel.macros
cat $tmp/EverythingExceptKernel.files | xargs grep -Eho '[A-Z0-9_]+_DEBUG' | sort | uniq > $tmp/EverythingExceptKernel.macros
comm -23 $tmp/Kernel.macros $tmp/EverythingExceptKernel.macros > $tmp/Kernel.unique
comm -1 $tmp/Kernel.macros $tmp/EverythingExceptKernel.macros > $tmp/EverythingExceptKernel.unique
cat $tmp/Kernel.unique | awk '{ print "#cmakedefine01 "$1 }' > $tmp/Kernel.header
cat $tmp/EverythingExceptKernel.unique | awk '{ print "#cmakedefine01 "$1 }' > $tmp/EverythingExceptKernel.header
for macro in $(cat $tmp/Kernel.unique)
do
cat $tmp/Kernel.files | xargs grep -l $macro >> $tmp/Kernel.new-includes ||:
done
cat $tmp/Kernel.new-includes | sort > $tmp/Kernel.new-includes.sorted
for macro in $(cat $tmp/EverythingExceptKernel.unique)
do
cat $tmp/Kernel.files | xargs grep -l $macro >> $tmp/Kernel.old-includes ||:
done
cat $tmp/Kernel.old-includes | sort > $tmp/Kernel.old-includes.sorted
comm -23 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.new
comm -13 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.old
comm -12 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.mixed
for file in $(cat $tmp/Kernel.includes.new)
do
sed -i -E 's/#include <AK\/Debug\.h>/#include <Kernel\/Debug\.h>/' $file
done
for file in $(cat $tmp/Kernel.includes.mixed)
do
echo "mixed include in $file, requires manual editing."
done
|
