| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Using the IO address space is only relevant for x86 machines, so let's
not compile instructions to access the PCI configuration space when we
don't target x86 platforms.
|
|
|
|
Before of this patch, we supported two methods to address a boot device:
1. Specifying root=/dev/hdXY, where X is a-z letter which corresponds to
a boot device, and Y as number from 1 to 16, to indicate the partition
number, which can be omitted to instruct the kernel to use a raw device
rather than a partition on a raw device.
2. Specifying root=PARTUUID: with a GUID string of a GUID partition. In
case of existing storage device with GPT partitions, this is most likely
the safest option to ensure booting from persistent storage.
While option 2 is more advanced and reliable, the first option has 2
caveats:
1. The string prefix "/dev/hd" doesn't mean anything beside a convention
on Linux installations, that was taken into use in Serenity. In Serenity
we don't mount DevTmpFS before we mount the boot device on /, so the
kernel doesn't really access /dev anyway, so this convention is only a
big misleading relic that can easily make the user to assume we access
/dev early on boot.
2. This convention although resemble the simple linux convention, is
quite limited in specifying a correct boot device across hardware setup
changes, so option 2 was recommended to ensure the system is always
bootable.
With these caveats in mind, this commit tries to fix the problem with
adding more addressing options as well as to remove the first option
being mentioned above of addressing.
To sum it up, there are 4 addressing options:
1. Hardware relative address - Each instance of StorageController is
assigned with a index number relative to the type of hardware it handles
which makes it possible to address storage devices with a prefix of the
commandset ("ata" for ATA, "nvme" for NVMe, "ramdisk" for Plain memory),
and then the number for the parent controller relative hardware index,
another number LUN target_id, and a third number for LUN disk_id.
2. LUN address - Similar to the previous option, but instead we rely on
the parent controller absolute index for the first number.
3. Block device major and minor numbers - by specifying the major and
minor numbers, the kernel can simply try to get the corresponding block
device and use it as the boot device.
4. GUID string, in the same fashion like before, so the user use the
"PARTUUID:" string prefix and add the GUID of the GPT partition.
For the new address modes 1 and 2, the user can choose to also specify a
partition out of the selected boot device. To do that, the user needs to
append the semicolon character and then add the string "partX" where X
is to be changed for the partition number. We start counting from 0, and
therefore the first partition number is 0 and not 1 in the kernel boot
argument.
|
|
|
|
|
|
This prevents us from needing a sv suffix, and potentially reduces the
need to run generic code for a single character (as contains,
starts_with, ends_with etc. for a char will be just a length and
equality check).
No functional changes.
|
|
Each of these strings would previously rely on StringView's char const*
constructor overload, which would call __builtin_strlen on the string.
Since we now have operator ""sv, we can replace these with much simpler
versions. This opens the door to being able to remove
StringView(char const*).
No functional changes.
|
|
This commit moves the length calculations out to be directly on the
StringView users. This is an important step towards the goal of removing
StringView(char const*), as it moves the responsibility of calculating
the size of the string to the user of the StringView (which will prevent
naive uses causing OOB access).
|
|
Instead of letting the user to determine whether framebuffer devices
will be created (which is useless because they are gone by now), let's
simplify the flow by allowing the user to choose between full, limited
or disabled functionality. The determination happens only once, so, if
the user decided to disable graphics support, the initialize method
exits immediately. If limited functionality is chosen, then a generic
DisplayConnector is initialized with the preset framebuffer resolution,
if present, and then the initialize method exits. As a default, the code
proceeds to initialize all drivers as usual.
|
|
|
|
This aid debugging on bare metal when we suspect that the boot console
does something wrong that interferes with other kernel components.
|
|
This change allow the user to request the kernel to not use any PCI
resources/devices at all.
Also, don't try to initialize devices that rely on PCI if disabled.
|
|
As we don't currently support MSI(X) interrupts, it could be an issue
to boot on some newer hardware. NVMe devices support polling mode
where the driver actively polls for completion instead of waiting for
an interrupt.
|
|
By default, we disable the PC speaker as it's quite annoying when using
the text mode console.
|
|
If the kernel commandline is not initialized, just halt everything.
|
|
|
|
This allows forcing the use of only the framebuffer set up by the
bootloader and skips instantiating devices for any other graphics
cards that may be present.
|
|
In preparation for disabling Vector::prepend from being available
during the compilation of the Kernel.
|
|
|
|
|
|
We need to use the IOAPIC in SMP mode, so if the user requested to
disable it, we can't enable SMP mode either.
|
|
This small change allows to use the IOAPIC by default without to enable
SMP mode, which emulates Uni-Processor setup with IOAPIC instead of
using the PIC.
This opens the opportunity to utilize other types of interrupts like MSI
and MSI-X interrupts.
|
|
|
|
|
|
'bootmode' now only controls which set of services are started by
SystemServer, so it is more appropriate to rename it to system_mode, and
no longer validate it in the Kernel.
|
|
Bootmode used to control panic behavior and SystemServer.
This patch factors panic behavior control into a separate flag.
|
|
Bootmode used to control framebuffers, panic behavior, and SystemServer.
This patch factors framebuffer control into a separate flag.
Note that the combination 'bootmode=self-test fbdev=on' leads to
unexpected behavior, which can only be fixed in a later commit.
|
|
|
|
The allowed options are "on", "limited" and "off". Anything else is now
not allowed and will result in kernel panic.
|
|
Let's remove the DynamicParser class, as it really did nothing yet in
the Kernel. Instead, when we add support for AML parsing, we can figure
out how to do it properly without the need of a derived class that just
complicates everything for no good reason.
|
|
This patch converts all the usage of AK::String around sys$execve() to
using KString instead, allowing us to catch and propagate OOM errors.
It also required changing the kernel CommandLine helper class to return
a vector of KString for the userspace init program arguments.
|
|
This will allow the Kernel to utilize memory access to the PCI
configuration space if such method is available.
|
|
A couple of things were changed:
1. Semantic changes - PCI segments are now called PCI domains, to better
match what they are really. It's also the name that Linux gave, and it
seems that Wikipedia also uses this name.
We also remove PCI::ChangeableAddress, because it was used in the past
but now it's no longer being used.
2. There are no WindowedMMIOAccess or MMIOAccess classes anymore, as
they made a bunch of unnecessary complexity. Instead, Windowed access is
removed entirely (this was tested, but never was benchmarked), so we are
left with IO access and memory access options. The memory access option
is essentially mapping the PCI bus (from the chosen PCI domain), to
virtual memory as-is. This means that unless needed, at any time, there
is only one PCI bus being mapped, and this is changed if access to
another PCI bus in the same PCI domain is needed. For now, we don't
support mapping of different PCI buses from different PCI domains at the
same time, because basically it's still a non-issue for most machines
out there.
2. OOM-safety is increased, especially when constructing the Access
object. It means that we pre-allocating any needed resources, and we try
to find PCI domains (if requested to initialize memory access) after we
attempt to construct the Access object, so it's possible to fail at this
point "gracefully".
3. All PCI API functions are now separated into a different header file,
which means only "clients" of the PCI subsystem API will need to include
that header file.
4. Functional changes - we only allow now to enumerate the bus after
a hardware scan. This means that the old method "enumerate_hardware"
is removed, so, when initializing an Access object, the initializing
function must call rescan on it to force it to find devices. This makes
it possible to fail rescan, and also to defer it after construction from
both OOM-safety terms and hotplug capabilities.
|
|
This typo / bug in the Traits<T> implementation for StringView caused
AK::HashMap methods to return a `String` when looking up values out of
a hash map of type HashTable<StringView,StringView>.
This change fixes the typo, and fixes the only consumer, the kernel
Commandline class.
|
|
This removes Pipes dependency on the UHCIController by introducing a
controller base class. This will be used to implement other controllers
such as OHCI.
Additionally, there can be multiple instances of a UHCI controller.
For example, multiple UHCI instances can be required for systems with
EHCI controllers. EHCI relies on using multiple of either UHCI or OHCI
controllers to drive USB 1.x devices.
This means UHCIController can no longer be a singleton. Multiple
instances of it can now be created and passed to the device and then to
the pipe.
To handle finding and creating these instances, USBManagement has been
introduced. It has the same pattern as the other management classes
such as NetworkManagement.
|
|
The kernel panic handler now parses the kernels boot_mode to decide how
to handle the panic. So the previous logic could end up in an panic loop
until we blew out the kernel stack.
Instead only validate the kernel's boot mode once per boot, after
initializing the kernel command line.
|
|
This function is now used when the kernel panics, so unmapping it would
make the kernel panic while in panic, which is not a good thing :P
|
|
This also removes a lot of CPU.h includes infavor for Sections.h
|
|
This does not add any functional changes
|
|
This is useful for debugging sessions mostly.
|
|
It was previously "no-fbdevsv" when it should be "no-fbdev"sv.
|
|
The current CommandLine API unfortunately allocates Strings just to
query the presence of arguments on the command line. Switch the API
to use StringView instead to reduce the number of String allocations.
|
|
This was proved to be a problematic option. I tested this option on
bare metal AHCI controller, and if we didn't reset the controller, the
firmware (SeaBIOS) could leave the controller state not clean, so an
plugged device signature was in place although the specific port had no
plugged device after rebooting.
Therefore, we need to ensure we use the controller in a clean state
always.
In addition to that, the Complete option was renamed to Aggressive, as
it represents better the consequences of choosing this option.
|
|
This is by default left empty, so people won't run the kernel in a mode
which they didn't want to. The embedded string will override the
supplied commandline from the bootloader, which is good for debugging
sessions.
This change seemed important for me, because I debug the kernel on bare
metal with iPXE, and every change to the commandline meant that I needed
rewrite a new iPXE USB image with a modified iPXE script.
|
|
|
|
|
|
As we removed the support of VBE modesetting that was done by GRUB early
on boot, we need to determine if we can modeset the resolution with our
drivers, and if not, we should enable text mode and ensure that
SystemServer knows about it too.
Also, SystemServer should first check if there's a framebuffer device
node, which is an indication that text mode was not even if it was
requested. Then, if it doesn't find it, it should check what boot_mode
argument the user specified (in case it's self-test). This way if we
try to use bochs-display device (which is not VGA compatible) and
request a text mode, it will not honor the request and will continue
with graphical mode.
Also try to print critical messages with mininum memory allocations
possible.
In LibVT, We make the implementation flexible for kernel-specific
methods that are implemented in ConsoleImpl class.
|
|
SPDX License Identifiers are a more compact / standardized
way of representing file license information.
See: https://spdx.dev/resources/use/#identifiers
This was done with the `ambr` search and replace tool.
ambr --no-parent-ignore --key-from-file --rep-from-file key.txt rep.txt *
|
|
This command line flag can be used to disable VirtIO support on
certain configurations (native windows) where interfacing with
virtio devices can cause qemu to freeze.
|
