| Age | Commit message (Collapse) | Author |
|---|
|
With the goal of centralizing all tests in the system, this is a
first step to establish a Tests sub-tree. It will contain all of
the unit tests and test harnesses for the various components in the
system.
|
|
According to POSIX.1 these should be in <crypt.h>.
|
|
|
|
When building libraries on macOS they'd be missing the SONAME
attribute which causes the linker to embed relative paths into
other libraries and executables:
Dynamic section at offset 0x52794 contains 28 entries:
Type Name/Value
(NEEDED) Shared library: [libgcc_s.so]
(NEEDED) Shared library: [Userland/Libraries/LibCrypt/libcrypt.so]
(NEEDED) Shared library: [Userland/Libraries/LibCrypto/libcrypto.so]
(NEEDED) Shared library: [Userland/Libraries/LibC/libc.so]
(NEEDED) Shared library: [libsystem.so]
(NEEDED) Shared library: [libm.so]
(NEEDED) Shared library: [libc.so]
The dynamic linker then fails to load those libraries which makes
the system unbootable.
|
|
|
|
|
|
Make this stuff a bit easier to maintain by using the
root level variables to build up the Toolchain paths.
Also leave a note for future editors of BuildIt.sh to
give them warning about the other changes they'll need
to make.
|
|
While this has a rather significant impact for me, it appears to have
very minimal build time improvements (or in some cases, regressions).
Also appears to cause some issues when building on macOS.
So disable it by default, but leave the option so people that get
something out of it (seems to mostly be a case of "is reading the
headers fast enough") can turn it on for their builds.
|
|
Until we get the goodness that C++ modules are supposed to be, let's try
to shave off some parse time using precompiled headers.
This commit only adds some very common AK headers, only to binaries,
libraries and the kernel (tests are not covered due to incompatibility
with AK/TestSuite.h).
This option is on by default, but can be disabled by passing
`-DPRECOMPILE_COMMON_HEADERS=OFF` to cmake, which will disable all
header precompilations.
This makes the build about 30 seconds faster on my machine (about 7%).
|
|
|
|
Problem:
- Newer versions of clang (ToT) have a similar `-Wliteral-suffix`
warning as GCC. A previous commit enabled it for all compilers. This
needs to be silenced for the entire build, but it currently only is
silenced for some directories.
Solution:
- Move the `-Wno-literal-suffix` option up in the CMakeLists.txt so
that it gets applied everywhere.
|
|
Problem:
- There are redundant options being set for some directories.
- Clang ToT fails to compile the project.
Solution:
- Remove redundancies.
- Fix clang error list.
|
|
This warning informs of float-to-double conversions. The best solution
seems to be to do math *either* in 32-bit *or* in 64-bit, and only to
cross over when absolutely necessary.
|
|
This flag warns on classes which have `virtual` functions but do not
have a `virtual` destructor.
This patch adds both the flag and missing destructors. The access level
of the destructors was determined by a two rules of thumb:
1. A destructor should have a similar or lower access level to that of a
constructor.
2. Having a `private` destructor implicitly deletes the default
constructor, which is probably undesirable for "interface" types
(classes with only virtual functions and no data).
In short, most of the added destructors are `protected`, unless the
compiler complained about access.
|
|
The following warnings do not occur anywhere in the codebase and so
enabling them is effectivly free:
* `-Wcast-align`
* `-Wduplicated-cond`
* `-Wformat=2`
* `-Wlogical-op`
* `-Wmisleading-indentation`
* `-Wunused`
These are taken as a strict subset of the list in #5487.
|
|
install-ports copys the necessary files from Ports/ to /usr/Ports. Also
refactor the compiler and destiation variables from .port_include.sh
into .hosted_defs.sh. .hosted_defs.sh does not exists when ports are
built in serenity
|
|
This regressed in #6000 and started complaining about bad literal
suffixes, so here's a quick and dirty partial revert to make things
build again.
|
|
Prior to this patch there was some long line of unreadable compiler
options. Now the long lines are deduplicated and there is only one
option per line to ease reading/maintenance.
|
|
|
|
Build ELF executables with a zero length `GNU_STACK`
program header flagged non-executable.
The stack is never executable on SerenityOS regardless
of whether the `GNU_STACK` header is specified.
Specifically defining this header is more explicit,
as absence of this header implies an executable stack
on other systems (Linux).
|
|
Partially addresses #5611.
|
|
This allows disabling the download of the pci.ids database at build
time.
Addresses concerns raised in #5410.
|
|
These tests were never built for the serenity target. Move their Lagom
build steps to the Lagom CMakeLists.txt, and add serenity build steps
for them. Also, fix the build errors when building them with the
serenity cross-compiler :^)
|
|
A new operator, operator""sv was added as of C++17 to support
string_view literals. This allows string_views to be constructed
from string literals and with no runtime cost to find the string
length.
See: https://en.cppreference.com/w/cpp/string/basic_string_view/operator%22%22sv
This change implements that functionality in AK::StringView.
We do have to suppress some warnings about implementing reserved
operators as we are essentially implementing STL functions in AK
as we have no STL :).
|
|
This is no longer limited to dbgln(). Also invert it to match all the
other ENABLE_FOO options.
|
|
For some reason I don't yet understand, building the kernel with -O2
produces a way-too-large kernel on some people's systems.
Since there are some really nice performance benefits from -O2 in
userspace, let's do a compromise and build Userland with -O2 but
put Kernel back into the -Os box for now.
|
|
Now that the issue with the kernel outgrowing its slot is patched,
we should be able to boot a slightly larger kernel without trouble.
|
|
-O2 kernels are failing to boot on other people's machines for some
reason that we need to investigate. In the meantime, let's revert.
|
|
Let's try going faster instead of smaller.
|
|
This is not yet supported by Clang, so let's disable it for non-GCC
compilers for now. (CLion was whining about it.)
|
|
Our TLS implementation relies on the TLS model being "initial-exec".
We previously enforced this by adding the '-ftls-model=initial-exec'
flag in the root CmakeLists file, but that did not affect ports - So
now we put that flag in the gcc spec files.
Closes #5366
|
|
This option causes GCC to generate code to prevent "stack clash" style
attacks where a very large stack allocation is used in to jump over the
stack guard page and into whatever's next to it.
|
|
To support this, I had to reorganize the "load_elf" function into two
passes. First we map all the dynamic objects, to get their symbols
into the global lookup table. Then we link all the dynamic objects.
So many read-only GOT's! :^)
|
|
The dynamic loader will now mark RELRO segments read-only after
performing relocations. This is pretty cool!
Note that this only applies to main executables so far,.
RELRO support for shared libraries will require some reorganizing
of the dynamic loader.
|
|
This removes some hard references to the toolchain, some unnecessary
uses of an external install command, and disables a -Werror flag (for
the time being) - only if run inside serenity.
With this, we can build and link the kernel :^)
|
|
Running 'ninja install && ninja image && ninja run` is kind of
annoying. I got tired, and came up with this instead, which does the
right thing and I don't have to type out the incantation.
|
|
KASAN is a dynamic analysis tool that finds memory errors. It focuses
mostly on finding use-after-free and out-of-bound read/writes bugs.
KASAN works by allocating a "shadow memory" region which is used to store
whether each byte of memory is safe to access. The compiler then instruments
the kernel code and a check is inserted which validates the state of the
shadow memory region on every memory access (load or store).
To fully integrate KASAN into the SerenityOS kernel we need to:
a) Implement the KASAN interface to intercept the injected loads/stores.
void __asan_load*(address);
void __asan_store(address);
b) Setup KASAN region and determine the shadow memory offset + translation.
This might be challenging since Serenity is only 32bit at this time.
Ex: Linux implements kernel address -> shadow address translation like:
static inline void *kasan_mem_to_shadow(const void *addr)
{
return ((unsigned long)addr >> KASAN_SHADOW_SCALE_SHIFT)
+ KASAN_SHADOW_OFFSET;
}
c) Integrating KASAN with Kernel allocators.
The kernel allocators need to be taught how to record allocation state
in the shadow memory region.
This commit only implements the initial steps of this long process:
- A new (default OFF) CMake build flag `ENABLE_KERNEL_ADDRESS_SANITIZER`
- Stubs out enough of the KASAN interface to allow the Kernel to link clean.
Currently the KASAN kernel crashes on boot (triple fault because of the crash
in strlen other sanitizer are seeing) but the goal here is to just get started,
and this should help others jump in and continue making progress on KASAN.
References:
* ASAN Paper: https://static.googleusercontent.com/media/research.google.com/en//pubs/archive/37752.pdf
* KASAN Docs: https://github.com/google/kasan
* NetBSD KASAN Blog: https://blog.netbsd.org/tnf/entry/kernel_address_sanitizer_part_3
* LWN KASAN Article: https://lwn.net/Articles/612153/
* Tracking Issue #5351
|
|
|
|
This is an external file from https://pci-ids.ucw.cz that's being updated
daily, which was imported a while ago but probably shouldn't live in the
SerenityOS repository in the first place (or else would need manual
maintenance). The legal aspects of redistributing this file as we
currently do are not quite clear to me, they require either GPL (version
2 or later) or 3-clause BSD - Serenity is 2-clause BSD...
The current version we use is 2019.08.08, so quite outdated - and while
most of these devices are obviously not supported, we're still capable
of *listing* them, so having an up-to-date version with recent additions
and fixes would be nice.
This updates the root CMakeLists.txt to check for existence of the file
and download it if not found - effectively on every fresh build. Do note
that this is not a critical file, and the system runs just fine should
this ever fail. :^)
|
|
This achieves two things:
- Programs can now intentionally perform arbitrary syscalls by calling
syscall(). This allows us to work on things like syscall fuzzing.
- It restricts the ability of userspace to make syscalls to a single
4KB page of code. In order to call the kernel directly, an attacker
must now locate this page and call through it.
|
|
The following script was used to make these changes:
#!/bin/bash
set -e
tmp=$(mktemp -d)
echo "tmp=$tmp"
find Kernel \( -name '*.cpp' -o -name '*.h' \) | sort > $tmp/Kernel.files
find . \( -path ./Toolchain -prune -o -path ./Build -prune -o -path ./Kernel -prune \) -o \( -name '*.cpp' -o -name '*.h' \) -print | sort > $tmp/EverythingExceptKernel.files
cat $tmp/Kernel.files | xargs grep -Eho '[A-Z0-9_]+_DEBUG' | sort | uniq > $tmp/Kernel.macros
cat $tmp/EverythingExceptKernel.files | xargs grep -Eho '[A-Z0-9_]+_DEBUG' | sort | uniq > $tmp/EverythingExceptKernel.macros
comm -23 $tmp/Kernel.macros $tmp/EverythingExceptKernel.macros > $tmp/Kernel.unique
comm -1 $tmp/Kernel.macros $tmp/EverythingExceptKernel.macros > $tmp/EverythingExceptKernel.unique
cat $tmp/Kernel.unique | awk '{ print "#cmakedefine01 "$1 }' > $tmp/Kernel.header
cat $tmp/EverythingExceptKernel.unique | awk '{ print "#cmakedefine01 "$1 }' > $tmp/EverythingExceptKernel.header
for macro in $(cat $tmp/Kernel.unique)
do
cat $tmp/Kernel.files | xargs grep -l $macro >> $tmp/Kernel.new-includes ||:
done
cat $tmp/Kernel.new-includes | sort > $tmp/Kernel.new-includes.sorted
for macro in $(cat $tmp/EverythingExceptKernel.unique)
do
cat $tmp/Kernel.files | xargs grep -l $macro >> $tmp/Kernel.old-includes ||:
done
cat $tmp/Kernel.old-includes | sort > $tmp/Kernel.old-includes.sorted
comm -23 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.new
comm -13 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.old
comm -12 $tmp/Kernel.new-includes.sorted $tmp/Kernel.old-includes.sorted > $tmp/Kernel.includes.mixed
for file in $(cat $tmp/Kernel.includes.new)
do
sed -i -E 's/#include <AK\/Debug\.h>/#include <Kernel\/Debug\.h>/' $file
done
for file in $(cat $tmp/Kernel.includes.mixed)
do
echo "mixed include in $file, requires manual editing."
done
|
|
This was done with the help of several scripts, I dump them here to
easily find them later:
awk '/#ifdef/ { print "#cmakedefine01 "$2 }' AK/Debug.h.in
for debug_macro in $(awk '/#ifdef/ { print $2 }' AK/Debug.h.in)
do
find . \( -name '*.cpp' -o -name '*.h' -o -name '*.in' \) -not -path './Toolchain/*' -not -path './Build/*' -exec sed -i -E 's/#ifdef '$debug_macro'/#if '$debug_macro'/' {} \;
done
# Remember to remove WRAPPER_GERNERATOR_DEBUG from the list.
awk '/#cmake/ { print "set("$2" ON)" }' AK/Debug.h.in
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
