HXCOMM Use DEFHEADING() to define headings in both help text and texi HXCOMM Text between STEXI and ETEXI are copied to texi version and HXCOMM discarded from C version HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and HXCOMM does not show up in the other formats. HXCOMM DEF(command, args, callback, arg_string, help) is used to construct HXCOMM monitor commands HXCOMM HXCOMM can be used for comments, discarded from both texi and C SQMP QMP Supported Commands ---------------------- This document describes all commands currently supported by QMP. Most of the time their usage is exactly the same as in the user Monitor, this means that any other document which also describe commands (the manpage, QEMU's manual, etc) can and should be consulted. QMP has two types of commands: regular and query commands. Regular commands usually change the Virtual Machine's state someway, while query commands just return information. The sections below are divided accordingly. It's important to observe that all communication examples are formatted in a reader-friendly way, so that they're easier to understand. However, in real protocol usage, they're emitted as a single line. Also, the following notation is used to denote data flow: -> data issued by the Client <- Server data response Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed information on the Server command and response formats. NOTE: This document is temporary and will be replaced soon. 1. Stability Considerations =========================== The current QMP command set (described in this file) may be useful for a number of use cases, however it's limited and several commands have bad defined semantics, specially with regard to command completion. These problems are going to be solved incrementally in the next QEMU releases and we're going to establish a deprecation policy for badly defined commands. If you're planning to adopt QMP, please observe the following: 1. The deprecation policy will take efect and be documented soon, please check the documentation of each used command as soon as a new release of QEMU is available 2. DO NOT rely on anything which is not explicit documented 3. Errors, in special, are not documented. Applications should NOT check for specific errors classes or data (it's strongly recommended to only check for the "error" key) 2. Regular Commands =================== Server's responses in the examples below are always a success response, please refer to the QMP specification for more details on error responses. EQMP STEXI @table @option ETEXI { .name = "help|?", .args_type = "name:s?", .params = "[cmd]", .help = "show the help", .mhandler.cmd = do_help_cmd, }, STEXI @item help or ? [@var{cmd}] @findex help Show the help for all commands or just for command @var{cmd}. ETEXI { .name = "commit", .args_type = "device:B", .params = "device|all", .help = "commit changes to the disk images (if -snapshot is used) or backing files", .mhandler.cmd = do_commit, }, STEXI @item commit @findex commit Commit changes to the disk images (if -snapshot is used) or backing files. ETEXI { .name = "q|quit", .args_type = "", .params = "", .help = "quit the emulator", .user_print = monitor_user_noop, .mhandler.cmd_new = do_quit, }, STEXI @item q or quit @findex quit Quit the emulator. ETEXI SQMP quit ---- Quit the emulator. Arguments: None. Example: -> { "execute": "quit" } <- { "return": {} } EQMP { .name = "eject", .args_type = "force:-f,device:B", .params = "[-f] device", .help = "eject a removable medium (use -f to force it)", .user_print = monitor_user_noop, .mhandler.cmd_new = do_eject, }, STEXI @item eject [-f] @var{device} @findex eject Eject a removable medium (use -f to force it). ETEXI SQMP eject ----- Eject a removable medium. Arguments: - force: force ejection (json-bool, optional) - device: device name (json-string) Example: -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } } <- { "return": {} } Note: The "force" argument defaults to false. EQMP { .name = "change", .args_type = "device:B,target:F,arg:s?", .params = "device filename [format]", .help = "change a removable medium, optional format", .user_print = monitor_user_noop, .mhandler.cmd_new = do_change, }, STEXI @item change @var{device} @var{setting} @findex change Change the configuration of a device. @table @option @item change @var{diskdevice} @var{filename} [@var{format}] Change the medium for a removable disk device to point to @var{filename}. eg @example (qemu) change ide1-cd0 /path/to/some.iso @end example @var{format} is optional. @item change vnc @var{display},@var{options} Change the configuration of the VNC server. The valid syntax for @var{display} and @var{options} are described at @ref{sec_invocation}. eg @example (qemu) change vnc localhost:1 @end example @item change vnc password [@var{password}] Change the password associated with the VNC server. If the new password is not supplied, the monitor will prompt for it to be entered. VNC passwords are only significant up to 8 letters. eg @example (qemu) change vnc password Password: ******** @end example @end table ETEXI SQMP change ------ Change a removable medium or VNC configuration. Arguments: - "device": device name (json-string) - "target": filename or item (json-string) - "arg": additional argument (json-string, optional) Examples: 1. Change a removable medium -> { "execute": "change", "arguments": { "device": "ide1-cd0", "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } } <- { "return": {} } 2. Change VNC password -> { "execute": "change", "arguments": { "device": "vnc", "target": "password", "arg": "foobar1" } } <- { "return": {} } EQMP { .name = "screendump", .args_type = "filename:F", .params = "filename", .help = "save screen into PPM image 'filename'", .user_print = monitor_user_noop, .mhandler.cmd_new = do_screen_dump, }, STEXI @item screendump @var{filename} @findex screendump Save screen into PPM image @var{filename}. ETEXI SQMP screendump ---------- Save screen into PPM image. Arguments: - "filename": file path (json-string) Example: -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } } <- { "return": {} } EQMP { .name = "logfile", .args_type = "filename:F", .params = "filename", .help = "output logs to 'filename'", .mhandler.cmd = do_logfile, }, STEXI @item logfile @var{filename} @findex logfile Output logs to @var{filename}. ETEXI #ifdef CONFIG_SIMPLE_TRACE { .name = "trace-event", .args_type = "name:s,option:b", .params = "name on|off", .help = "changes status of a specific trace event", .mhandler.cmd = do_change_trace_event_state, }, STEXI @item trace-event @findex trace-event changes status of a trace event ETEXI { .name = "trace-file", .args_type = "op:s?,arg:F?", .params = "on|off|flush|set [arg]", .help = "open, close, or flush trace file, or set a new file name", .mhandler.cmd = do_trace_file, }, STEXI @item trace-file on|off|flush @findex trace-file Open, close, or flush the trace file. If no argument is given, the status of the trace file is displayed. ETEXI #endif { .name = "log", .args_type = "items:s", .params = "item1[,...]", .help = "activate logging of the specified items to '/tmp/qemu.log'", .mhandler.cmd = do_log, }, STEXI @item log @var{item1}[,...] @findex log Activate logging of the specified items to @file{/tmp/qemu.log}. ETEXI { .name = "savevm", .args_type = "name:s?", .params = "[tag|id]", .help = "save a VM snapshot. If no tag or id are provided, a new snapshot is created", .mhandler.cmd = do_savevm, }, STEXI @item savevm [@var{tag}|@var{id}] @findex savevm Create a snapshot of the whole virtual machine. If @var{tag} is provided, it is used as human readable identifier. If there is already a snapshot with the same tag or ID, it is replaced. More info at @ref{vm_snapshots}. ETEXI { .name = "loadvm", .args_type = "name:s", .params = "tag|id", .help = "restore a VM snapshot from its tag or id", .mhandler.cmd = do_loadvm, }, STEXI @item loadvm @var{tag}|@var{id} @findex loadvm Set the whole virtual machine to the snapshot identified by the tag @var{tag} or the unique snapshot ID @var{id}. ETEXI { .name = "delvm", .args_type = "name:s", .params = "tag|id", .help = "delete a VM snapshot from its tag or id", .mhandler.cmd = do_delvm, }, STEXI @item delvm @var{tag}|@var{id} @findex delvm Delete the snapshot identified by @var{tag} or @var{id}. ETEXI { .name = "singlestep", .args_type = "option:s?", .params = "[on|off]", .help = "run emulation in singlestep mode or switch to normal mode", .mhandler.cmd = do_singlestep, }, STEXI @item singlestep [off] @findex singlestep Run the emulation in single step mode. If called with option off, the emulation returns to normal mode. ETEXI { .name = "stop", .args_type = "", .params = "", .help = "stop emulation", .user_print = monitor_user_noop, .mhandler.cmd_new = do_stop, }, STEXI @item stop @findex stop Stop emulation. ETEXI SQMP stop ---- Stop the emulator. Arguments: None. Example: -> { "execute": "stop" } <- { "return": {} } EQMP { .name = "c|cont", .args_type = "", .params = "", .help = "resume emulation", .user_print = monitor_user_noop, .mhandler.cmd_new = do_cont, }, STEXI @item c or cont @findex cont Resume emulation. ETEXI SQMP cont ---- Resume emulation. Arguments: None. Example: -> { "execute": "cont" } <- { "return": {} } EQMP { .name = "gdbserver", .args_type = "device:s?", .params = "[device]", .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'", .mhandler.cmd = do_gdbserver, }, STEXI @item gdbserver [@var{port}] @findex gdbserver Start gdbserver session (default @var{port}=1234) ETEXI { .name = "x", .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "virtual memory dump starting at 'addr'", .mhandler.cmd = do_memory_dump, }, STEXI @item x/fmt @var{addr} @findex x Virtual memory dump starting at @var{addr}. ETEXI { .name = "xp", .args_type = "fmt:/,addr:l", .params = "/fmt addr", .help = "physical memory dump starting at 'addr'", .mhandler.cmd = do_physical_memory_dump, }, STEXI @item xp /@var{fmt} @var{addr} @findex xp Physical memory dump starting at @var{addr}. @var{fmt} is a format which tells the command how to format the data. Its syntax is: @option{/@{count@}@{format@}@{size@}} @table @var @item count is the number of items to be dumped. @item format can be x (hex), d (signed decimal), u (unsigned decimal), o (octal), c (char) or i (asm instruction). @item size can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86, @code{h} or @code{w} can be specified with the @code{i} format to respectively select 16 or 32 bit code instruction size. @end table Examples: @itemize @item Dump 10 instructions at the current instruction pointer: @example (qemu) x/10i $eip 0x90107063: ret 0x90107064: sti 0x90107065: lea 0x0(%esi,1),%esi 0x90107069: lea 0x0(%edi,1),%edi 0x90107070: ret 0x90107071: jmp 0x90107080 0x90107073: nop 0x90107074: nop 0x90107075: nop 0x90107076: nop @end example @item Dump 80 16 bit values at the start of the video memory. @smallexample (qemu) xp/80hx 0xb8000 0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42 0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41 0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72 0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73 0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20 0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720 0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 @end smallexample @end itemize ETEXI { .name = "p|print", .args_type = "fmt:/,val:l", .params = "/fmt expr", .help = "print expression value (use $reg for CPU register access)", .mhandler.cmd = do_print, }, STEXI @item p or print/@var{fmt} @var{expr} @findex print Print expression value. Only the @var{format} part of @var{fmt} is used. ETEXI { .name = "i", .args_type = "fmt:/,addr:i,index:i.", .params = "/fmt addr", .help = "I/O port read", .mhandler.cmd = do_ioport_read, }, STEXI Read I/O port. ETEXI { .name = "o", .args_type = "fmt:/,addr:i,val:i", .params = "/fmt addr value", .help = "I/O port write", .mhandler.cmd = do_ioport_write, }, STEXI Write to I/O port. ETEXI { .name = "sendkey", .args_type = "string:s,hold_time:i?", .params = "keys [hold_ms]", .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)", .mhandler.cmd = do_sendkey, }, STEXI @item sendkey @var{keys} @findex sendkey Send @var{keys} to the emulator. @var{keys} could be the name of the key or @code{#} followed by the raw value in either decimal or hexadecimal format. Use @code{-} to press several keys simultaneously. Example: @example sendkey ctrl-alt-f1 @end example This command is useful to send keys that your graphical user interface intercepts at low level, such as @code{ctrl-alt-f1} in X Window. ETEXI { .name = "system_reset", .args_type = "", .params = "", .help = "reset the system", .user_print = monitor_user_noop, .mhandler.cmd_new = do_system_reset, }, STEXI @item system_reset @findex system_reset Reset the system. ETEXI SQMP system_reset ------------ Reset the system. Arguments: None. Example: -> { "execute": "system_reset" } <- { "return": {} } EQMP { .name = "system_powerdown", .args_type = "", .params = "", .help = "send system power down event", .user_print = monitor_user_noop, .mhandler.cmd_new = do_system_powerdown, }, STEXI @item system_powerdown @findex system_powerdown Power down the system (if supported). ETEXI SQMP system_powerdown ---------------- Send system power down event. Arguments: None. Example: -> { "execute": "system_powerdown" } <- { "return": {} } EQMP { .name = "sum", .args_type = "start:i,size:i", .params = "addr size", .help = "compute the checksum of a memory region", .mhandler.cmd = do_sum, }, STEXI @item sum @var{addr} @var{size} @findex sum Compute the checksum of a memory region. ETEXI { .name = "usb_add", .args_type = "devname:s", .params = "device", .help = "add USB device (e.g. 'host:bus.addr' or 'host:vendor_id:product_id')", .mhandler.cmd = do_usb_add, }, STEXI @item usb_add @var{devname} @findex usb_add Add the USB device @var{devname}. For details of available devices see @ref{usb_devices} ETEXI { .name = "usb_del", .args_type = "devname:s", .params = "device", .help = "remove USB device 'bus.addr'", .mhandler.cmd = do_usb_del, }, STEXI @item usb_del @var{devname} @findex usb_del Remove the USB device @var{devname} from the QEMU virtual USB hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor command @code{info usb} to see the devices you can remove. ETEXI { .name = "device_add", .args_type = "device:O", .params = "driver[,prop=value][,...]", .help = "add device, like -device on the command line", .user_print = monitor_user_noop, .mhandler.cmd_new = do_device_add, }, STEXI @item device_add @var{config} @findex device_add Add device. ETEXI SQMP device_add ---------- Add a device. Arguments: - "driver": the name of the new device's driver (json-string) - "bus": the device's parent bus (device tree path, json-string, optional) - "id": the device's ID, must be unique (json-string) - device properties Example: -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } } <- { "return": {} } Notes: (1) For detailed information about this command, please refer to the 'docs/qdev-device-use.txt' file. (2) It's possible to list device properties by running QEMU with the "-device DEVICE,\?" command-line argument, where DEVICE is the device's name EQMP { .name = "device_del", .args_type = "id:s", .params = "device", .help = "remove device", .user_print = monitor_user_noop, .mhandler.cmd_new = do_device_del, }, STEXI @item device_del @var{id} @findex device_del Remove device @var{id}. ETEXI SQMP device_del ---------- Remove a device. Arguments: - "id": the device's ID (json-string) Example: -> { "execute": "device_del", "arguments": { "id": "net1" } } <- { "return": {} } EQMP { .name = "cpu", .args_type = "index:i", .params = "index", .help = "set the default CPU", .user_print = monitor_user_noop, .mhandler.cmd_new = do_cpu_set, }, STEXI @item cpu @var{index} @findex cpu Set the default CPU. ETEXI SQMP cpu --- Set the default CPU. Arguments: - "index": the CPU's index (json-int) Example: -> { "execute": "cpu", "arguments": { "index": 0 } } <- { "return": {} } Note: CPUs' indexes are obtained with the 'query-cpus' command. EQMP { .name = "mouse_move", .args_type = "dx_str:s,dy_str:s,dz_str:s?", .params = "dx dy [dz]", .help = "send mouse move events", .mhandler.cmd = do_mouse_move, }, STEXI @item mouse_move @var{dx} @var{dy} [@var{dz}] @findex mouse_move Move the active mouse to the specified coordinates @var{dx} @var{dy} with optional scroll axis @var{dz}. ETEXI { .name = "mouse_button", .args_type = "button_state:i", .params = "state", .help = "change mouse button state (1=L, 2=M, 4=R)", .mhandler.cmd = do_mouse_button, }, STEXI @item mouse_button @var{val} @findex mouse_button Change the active mouse button state @var{val} (1=L, 2=M, 4=R). ETEXI { .name = "mouse_set", .args_type = "index:i", .params = "index", .help = "set which mouse device receives events", .mhandler.cmd = do_mouse_set, }, STEXI @item mouse_set @var{index} @findex mouse_set Set which mouse device receives events at given @var{index}, index can be obtained with @example info mice @end example ETEXI #ifdef HAS_AUDIO { .name = "wavcapture", .args_type = "path:F,freq:i?,bits:i?,nchannels:i?", .params = "path [frequency [bits [channels]]]", .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", .mhandler.cmd = do_wav_capture, }, #endif STEXI @item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]] @findex wavcapture Capture audio into @var{filename}. Using sample rate @var{frequency} bits per sample @var{bits} and number of channels @var{channels}. Defaults: @itemize @minus @item Sample rate = 44100 Hz - CD quality @item Bits = 16 @item Number of channels = 2 - Stereo @end itemize ETEXI #ifdef HAS_AUDIO { .name = "stopcapture", .args_type = "n:i", .params = "capture index", .help = "stop capture", .mhandler.cmd = do_stop_capture, }, #endif STEXI @item stopcapture @var{index} @findex stopcapture Stop capture with a given @var{index}, index can be obtained with @example info capture @end example ETEXI { .name = "memsave", .args_type = "val:l,size:i,filename:s", .params = "addr size file", .help = "save to disk virtual memory dump starting at 'addr' of size 'size'", .user_print = monitor_user_noop, .mhandler.cmd_new = do_memory_save, }, STEXI @item memsave @var{addr} @var{size} @var{file} @findex memsave save to disk virtual memory dump starting at @var{addr} of size @var{size}. ETEXI SQMP memsave ------- Save to disk virtual memory dump starting at 'val' of size 'size'. Arguments: - "val": the starting address (json-int) - "size": the memory size, in bytes (json-int) - "filename": file path (json-string) Example: -> { "execute": "memsave", "arguments": { "val": 10, "size": 100, "filename": "/tmp/virtual-mem-dump" } } <- { "return": {} } Note: Depends on the current CPU. EQMP { .name = "pmemsave", .args_type = "val:l,size:i,filename:s", .params = "addr size file", .help = "save to disk physical memory dump starting at 'addr' of size 'size'", .user_print = monitor_user_noop, .mhandler.cmd_new = do_physical_memory_save, }, STEXI @item pmemsave @var{addr} @var{size} @var{file} @findex pmemsave save to disk physical memory dump starting at @var{addr} of size @var{size}. ETEXI SQMP pmemsave -------- Save to disk physical memory dump starting at 'val' of size 'size'. Arguments: - "val": the starting address (json-int) - "size": the memory size, in bytes (json-int) - "filename": file path (json-string) Example: -> { "execute": "pmemsave", "arguments": { "val": 10, "size": 100, "filename": "/tmp/physical-mem-dump" } } <- { "return": {} } EQMP { .name = "boot_set", .args_type = "bootdevice:s", .params = "bootdevice", .help = "define new values for the boot device list", .mhandler.cmd = do_boot_set, }, STEXI @item boot_set @var{bootdevicelist} @findex boot_set Define new values for the boot device list. Those values will override the values specified on the command line through the @code{-boot} option. The values that can be specified here depend on the machine type, but are the same that can be specified in the @code{-boot} command line option. ETEXI #if defined(TARGET_I386) { .name = "nmi", .args_type = "cpu_index:i", .params = "cpu", .help = "inject an NMI on the given CPU", .mhandler.cmd = do_inject_nmi, }, #endif STEXI @item nmi @var{cpu} @findex nmi Inject an NMI on the given CPU (x86 only). ETEXI { .name = "migrate", .args_type = "detach:-d,blk:-b,inc:-i,uri:s", .params = "[-d] [-b] [-i] uri", .help = "migrate to URI (using -d to not wait for completion)" "\n\t\t\t -b for migration without shared storage with" " full copy of disk\n\t\t\t -i for migration without " "shared storage with incremental copy of disk " "(base image shared between src and destination)", .user_print = monitor_user_noop, .mhandler.cmd_new = do_migrate, }, STEXI @item migrate [-d] [-b] [-i] @var{uri} @findex migrate Migrate to @var{uri} (using -d to not wait for completion). -b for migration with full copy of disk -i for migration with incremental copy of disk (base image is shared) ETEXI SQMP migrate ------- Migrate to URI. Arguments: - "blk": block migration, full disk copy (json-bool, optional) - "inc": incremental disk copy (json-bool, optional) - "uri": Destination URI (json-string) Example: -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } } <- { "return": {} } Notes: (1) The 'query-migrate' command should be used to check migration's progress and final result (this information is provided by the 'status' member) (2) All boolean arguments default to false (3) The user Monitor's "detach" argument is invalid in QMP and should not be used EQMP { .name = "migrate_cancel", .args_type = "", .params = "", .help = "cancel the current VM migration", .user_print = monitor_user_noop, .mhandler.cmd_new = do_migrate_cancel, }, STEXI @item migrate_cancel @findex migrate_cancel Cancel the current VM migration. ETEXI SQMP migrate_cancel -------------- Cancel the current migration. Arguments: None. Example: -> { "execute": "migrate_cancel" } <- { "return": {} } EQMP { .name = "migrate_set_speed", .args_type = "value:f", .params = "value", .help = "set maximum speed (in bytes) for migrations", .user_print = monitor_user_noop, .mhandler.cmd_new = do_migrate_set_speed, }, STEXI @item migrate_set_speed @var{value} @findex migrate_set_speed Set maximum speed to @var{value} (in bytes) for migrations. ETEXI SQMP migrate_set_speed ----------------- Set maximum speed for migrations. Arguments: - "value": maximum speed, in bytes per second (json-number) Example: -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } } <- { "return": {} } EQMP { .name = "migrate_set_downtime", .args_type = "value:T", .params = "value", .help = "set maximum tolerated downtime (in seconds) for migrations", .user_print = monitor_user_noop, .mhandler.cmd_new = do_migrate_set_downtime, }, STEXI @item migrate_set_downtime @var{second} @findex migrate_set_downtime Set maximum tolerated downtime (in seconds) for migration. ETEXI SQMP migrate_set_downtime -------------------- Set maximum tolerated downtime (in seconds) for migrations. Arguments: - "value": maximum downtime (json-number) Example: -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } } <- { "return": {} } EQMP #if defined(TARGET_I386) { .name = "drive_add", .args_type = "pci_addr:s,opts:s", .params = "[[:]:]\n" "[file=file][,if=type][,bus=n]\n" "[,unit=m][,media=d][index=i]\n" "[,cyls=c,heads=h,secs=s[,trans=t]]\n" "[snapshot=on|off][,cache=on|off]", .help = "add drive to PCI storage controller", .mhandler.cmd = drive_hot_add, }, #endif STEXI @item drive_add @findex drive_add Add drive to PCI storage controller. ETEXI #if defined(TARGET_I386) { .name = "pci_add", .args_type = "pci_addr:s,type:s,opts:s?", .params = "auto|[[:]:] nic|storage [[vlan=n][,macaddr=addr][,model=type]] [file=file][,if=type][,bus=nr]...", .help = "hot-add PCI device", .mhandler.cmd = pci_device_hot_add, }, #endif STEXI @item pci_add @findex pci_add Hot-add PCI device. ETEXI #if defined(TARGET_I386) { .name = "pci_del", .args_type = "pci_addr:s", .params = "[[:]:]", .help = "hot remove PCI device", .mhandler.cmd = do_pci_device_hot_remove, }, #endif STEXI @item pci_del @findex pci_del Hot remove PCI device. ETEXI { .name = "host_net_add", .args_type = "device:s,opts:s?", .params = "tap|user|socket|vde|dump [options]", .help = "add host VLAN client", .mhandler.cmd = net_host_device_add, }, STEXI @item host_net_add @findex host_net_add Add host VLAN client. ETEXI { .name = "host_net_remove", .args_type = "vlan_id:i,device:s", .params = "vlan_id name", .help = "remove host VLAN client", .mhandler.cmd = net_host_device_remove, }, STEXI @item host_net_remove @findex host_net_remove Remove host VLAN client. ETEXI { .name = "netdev_add", .args_type = "netdev:O", .params = "[user|tap|socket],id=str[,prop=value][,...]", .help = "add host network device", .user_print = monitor_user_noop, .mhandler.cmd_new = do_netdev_add, }, STEXI @item netdev_add @findex netdev_add Add host network device. ETEXI SQMP netdev_add ---------- Add host network device. Arguments: - "type": the device type, "tap", "user", ... (json-string) - "id": the device's ID, must be unique (json-string) - device options Example: -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } <- { "return": {} } Note: The supported device options are the same ones supported by the '-net' command-line argument, which are listed in the '-help' output or QEMU's manual EQMP { .name = "netdev_del", .args_type = "id:s", .params = "id", .help = "remove host network device", .user_print = monitor_user_noop, .mhandler.cmd_new = do_netdev_del, }, STEXI @item netdev_del @findex netdev_del Remove host network device. ETEXI SQMP netdev_del ---------- Remove host network device. Arguments: - "id": the device's ID, must be unique (json-string) Example: -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } } <- { "return": {} } EQMP #ifdef CONFIG_SLIRP { .name = "hostfwd_add", .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport", .help = "redirect TCP or UDP connections from host to guest (requires -net user)", .mhandler.cmd = net_slirp_hostfwd_add, }, #endif STEXI @item hostfwd_add @findex hostfwd_add Redirect TCP or UDP connections from host to guest (requires -net user). ETEXI #ifdef CONFIG_SLIRP { .name = "hostfwd_remove", .args_type = "arg1:s,arg2:s?,arg3:s?", .params = "[vlan_id name] [tcp|udp]:[hostaddr]:hostport", .help = "remove host-to-guest TCP or UDP redirection", .mhandler.cmd = net_slirp_hostfwd_remove, }, #endif STEXI @item hostfwd_remove @findex hostfwd_remove Remove host-to-guest TCP or UDP redirection. ETEXI { .name = "balloon", .args_type = "value:M", .params = "target", .help = "request VM to change its memory allocation (in MB)", .user_print = monitor_user_noop, .mhandler.cmd_async = do_balloon, .flags = MONITOR_CMD_ASYNC, }, STEXI @item balloon @var{value} @findex balloon Request VM to change its memory allocation to @var{value} (in MB). ETEXI SQMP balloon ------- Request VM to change its memory allocation (in bytes). Arguments: - "value": New memory allocation (json-int) Example: -> { "execute": "balloon", "arguments": { "value": 536870912 } } <- { "return": {} } EQMP { .name = "set_link", .args_type = "name:s,up:b", .params = "name on|off", .help = "change the link status of a network adapter", .user_print = monitor_user_noop, .mhandler.cmd_new = do_set_link, }, STEXI @item set_link @var{name} [on|off] @findex set_link Switch link @var{name} on (i.e. up) or off (i.e. down). ETEXI SQMP set_link -------- Change the link status of a network adapter. Arguments: - "name": network device name (json-string) - "up": status is up (json-bool) Example: -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } } <- { "return": {} } EQMP { .name = "watchdog_action", .args_type = "action:s", .params = "[reset|shutdown|poweroff|pause|debug|none]", .help = "change watchdog action", .mhandler.cmd = do_watchdog_action, }, STEXI @item watchdog_action @findex watchdog_action Change watchdog action. ETEXI { .name = "acl_show", .args_type = "aclname:s", .params = "aclname", .help = "list rules in the access control list", .mhandler.cmd = do_acl_show, }, STEXI @item acl_show @var{aclname} @findex acl_show List all the matching rules in the access control list, and the default policy. There are currently two named access control lists, @var{vnc.x509dname} and @var{vnc.username} matching on the x509 client certificate distinguished name, and SASL username respectively. ETEXI { .name = "acl_policy", .args_type = "aclname:s,policy:s", .params = "aclname allow|deny", .help = "set default access control list policy", .mhandler.cmd = do_acl_policy, }, STEXI @item acl_policy @var{aclname} @code{allow|deny} @findex acl_policy Set the default access control list policy, used in the event that none of the explicit rules match. The default policy at startup is always @code{deny}. ETEXI { .name = "acl_add", .args_type = "aclname:s,match:s,policy:s,index:i?", .params = "aclname match allow|deny [index]", .help = "add a match rule to the access control list", .mhandler.cmd = do_acl_add, }, STEXI @item acl_add @var{aclname} @var{match} @code{allow|deny} [@var{index}] @findex acl_add Add a match rule to the access control list, allowing or denying access. The match will normally be an exact username or x509 distinguished name, but can optionally include wildcard globs. eg @code{*@@EXAMPLE.COM} to allow all users in the @code{EXAMPLE.COM} kerberos realm. The match will normally be appended to the end of the ACL, but can be inserted earlier in the list if the optional @var{index} parameter is supplied. ETEXI { .name = "acl_remove", .args_type = "aclname:s,match:s", .params = "aclname match", .help = "remove a match rule from the access control list", .mhandler.cmd = do_acl_remove, }, STEXI @item acl_remove @var{aclname} @var{match} @findex acl_remove Remove the specified match rule from the access control list. ETEXI { .name = "acl_reset", .args_type = "aclname:s", .params = "aclname", .help = "reset the access control list", .mhandler.cmd = do_acl_reset, }, STEXI @item acl_reset @var{aclname} @findex acl_reset Remove all matches from the access control list, and set the default policy back to @code{deny}. ETEXI #if defined(TARGET_I386) { .name = "mce", .args_type = "cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", .params = "cpu bank status mcgstatus addr misc", .help = "inject a MCE on the given CPU", .mhandler.cmd = do_inject_mce, }, #endif STEXI @item mce @var{cpu} @var{bank} @var{status} @var{mcgstatus} @var{addr} @var{misc} @findex mce (x86) Inject an MCE on the given CPU (x86 only). ETEXI { .name = "getfd", .args_type = "fdname:s", .params = "getfd name", .help = "receive a file descriptor via SCM rights and assign it a name", .user_print = monitor_user_noop, .mhandler.cmd_new = do_getfd, }, STEXI @item getfd @var{fdname} @findex getfd If a file descriptor is passed alongside this command using the SCM_RIGHTS mechanism on unix sockets, it is stored using the name @var{fdname} for later use by other monitor commands. ETEXI SQMP getfd ----- Receive a file descriptor via SCM rights and assign it a name. Arguments: - "fdname": file descriptor name (json-string) Example: -> { "execute": "getfd", "arguments": { "fdname": "fd1" } } <- { "return": {} } EQMP { .name = "closefd", .args_type = "fdname:s", .params = "closefd name", .help = "close a file descriptor previously passed via SCM rights", .user_print = monitor_user_noop, .mhandler.cmd_new = do_closefd, }, STEXI @item closefd @var{fdname} @findex closefd Close the file descriptor previously assigned to @var{fdname} using the @code{getfd} command. This is only needed if the file descriptor was never used by another monitor command. ETEXI SQMP closefd ------- Close a file descriptor previously passed via SCM rights. Arguments: - "fdname": file descriptor name (json-string) Example: -> { "execute": "closefd", "arguments": { "fdname": "fd1" } } <- { "return": {} } EQMP { .name = "block_passwd", .args_type = "device:B,password:s", .params = "block_passwd device password", .help = "set the password of encrypted block devices", .user_print = monitor_user_noop, .mhandler.cmd_new = do_block_set_passwd, }, STEXI @item block_passwd @var{device} @var{password} @findex block_passwd Set the encrypted device @var{device} password to @var{password} ETEXI SQMP block_passwd ------------ Set the password of encrypted block devices. Arguments: - "device": device name (json-string) - "password": password (json-string) Example: -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0", "password": "12345" } } <- { "return": {} } EQMP { .name = "qmp_capabilities", .args_type = "", .params = "", .help = "enable QMP capabilities", .user_print = monitor_user_noop, .mhandler.cmd_new = do_qmp_capabilities, }, STEXI @item qmp_capabilities @findex qmp_capabilities Enable the specified QMP capabilities ETEXI SQMP qmp_capabilities ---------------- Enable QMP capabilities. Arguments: None. Example: -> { "execute": "qmp_capabilities" } <- { "return": {} } Note: This command must be issued before issuing any other command. EQMP HXCOMM Keep the 'info' command at the end! HXCOMM This is required for the QMP documentation layout. SQMP 3. Query Commands ================= EQMP { .name = "info", .args_type = "item:s?", .params = "[subcommand]", .help = "show various information about the system state", .user_print = monitor_user_noop, .mhandler.cmd_new = do_info, }, STEXI @item info @var{subcommand} @findex info Show various information about the system state. @table @option @item info version show the version of QEMU ETEXI SQMP query-version ------------- Show QEMU version. Return a json-object with the following information: - "qemu": A json-object containing three integer values: - "major": QEMU's major version (json-int) - "minor": QEMU's minor version (json-int) - "micro": QEMU's micro version (json-int) - "package": package's version (json-string) Example: -> { "execute": "query-version" } <- { "return":{ "qemu":{ "major":0, "minor":11, "micro":5 }, "package":"" } } EQMP STEXI @item info commands list QMP available commands ETEXI SQMP query-commands -------------- List QMP available commands. Each command is represented by a json-object, the returned value is a json-array of all commands. Each json-object contain: - "name": command's name (json-string) Example: -> { "execute": "query-commands" } <- { "return":[ { "name":"query-balloon" }, { "name":"system_powerdown" } ] } Note: This example has been shortened as the real response is too long. EQMP STEXI @item info network show the various VLANs and the associated devices ETEXI STEXI @item info chardev show the character devices ETEXI SQMP query-chardev ------------- Each device is represented by a json-object. The returned value is a json-array of all devices. Each json-object contain the following: - "label": device's label (json-string) - "filename": device's file (json-string) Example: -> { "execute": "query-chardev" } <- { "return":[ { "label":"monitor", "filename":"stdio" }, { "label":"serial0", "filename":"vc" } ] } EQMP STEXI @item info block show the block devices ETEXI SQMP query-block ----------- Show the block devices. Each block device information is stored in a json-object and the returned value is a json-array of all devices. Each json-object contain the following: - "device": device name (json-string) - "type": device type (json-string) - Possible values: "hd", "cdrom", "floppy", "unknown" - "removable": true if the device is removable, false otherwise (json-bool) - "locked": true if the device is locked, false otherwise (json-bool) - "inserted": only present if the device is inserted, it is a json-object containing the following: - "file": device file name (json-string) - "ro": true if read-only, false otherwise (json-bool) - "drv": driver format name (json-string) - Possible values: "blkdebug", "bochs", "cloop", "cow", "dmg", "file", "file", "ftp", "ftps", "host_cdrom", "host_device", "host_floppy", "http", "https", "nbd", "parallels", "qcow", "qcow2", "raw", "tftp", "vdi", "vmdk", "vpc", "vvfat" - "backing_file": backing file name (json-string, optional) - "encrypted": true if encrypted, false otherwise (json-bool) Example: -> { "execute": "query-block" } <- { "return":[ { "device":"ide0-hd0", "locked":false, "removable":false, "inserted":{ "ro":false, "drv":"qcow2", "encrypted":false, "file":"disks/test.img" }, "type":"hd" }, { "device":"ide1-cd0", "locked":false, "removable":true, "type":"cdrom" }, { "device":"floppy0", "locked":false, "removable":true, "type": "floppy" }, { "device":"sd0", "locked":false, "removable":true, "type":"floppy" } ] } EQMP STEXI @item info blockstats show block device statistics ETEXI SQMP query-blockstats ---------------- Show block device statistics. Each device statistic information is stored in a json-object and the returned value is a json-array of all devices. Each json-object contain the following: - "device": device name (json-string) - "stats": A json-object with the statistics information, it contains: - "rd_bytes": bytes read (json-int) - "wr_bytes": bytes written (json-int) - "rd_operations": read operations (json-int) - "wr_operations": write operations (json-int) - "wr_highest_offset": Highest offset of a sector written since the BlockDriverState has been opened (json-int) - "parent": Contains recursively the statistics of the underlying protocol (e.g. the host file for a qcow2 image). If there is no underlying protocol, this field is omitted (json-object, optional) Example: -> { "execute": "query-blockstats" } <- { "return":[ { "device":"ide0-hd0", "parent":{ "stats":{ "wr_highest_offset":3686448128, "wr_bytes":9786368, "wr_operations":751, "rd_bytes":122567168, "rd_operations":36772 } }, "stats":{ "wr_highest_offset":2821110784, "wr_bytes":9786368, "wr_operations":692, "rd_bytes":122739200, "rd_operations":36604 } }, { "device":"ide1-cd0", "stats":{ "wr_highest_offset":0, "wr_bytes":0, "wr_operations":0, "rd_bytes":0, "rd_operations":0 } }, { "device":"floppy0", "stats":{ "wr_highest_offset":0, "wr_bytes":0, "wr_operations":0, "rd_bytes":0, "rd_operations":0 } }, { "device":"sd0", "stats":{ "wr_highest_offset":0, "wr_bytes":0, "wr_operations":0, "rd_bytes":0, "rd_operations":0 } } ] } EQMP STEXI @item info registers show the cpu registers @item info cpus show infos for each CPU ETEXI SQMP query-cpus ---------- Show CPU information. Return a json-array. Each CPU is represented by a json-object, which contains: - "CPU": CPU index (json-int) - "current": true if this is the current CPU, false otherwise (json-bool) - "halted": true if the cpu is halted, false otherwise (json-bool) - Current program counter. The key's name depends on the architecture: "pc": i386/x86_64 (json-int) "nip": PPC (json-int) "pc" and "npc": sparc (json-int) "PC": mips (json-int) Example: -> { "execute": "query-cpus" } <- { "return":[ { "CPU":0, "current":true, "halted":false, "pc":3227107138 }, { "CPU":1, "current":false, "halted":true, "pc":7108165 } ] } EQMP STEXI @item info history show the command line history @item info irq show the interrupts statistics (if available) @item info pic show i8259 (PIC) state ETEXI STEXI @item info pci show emulated PCI device info ETEXI SQMP query-pci --------- PCI buses and devices information. The returned value is a json-array of all buses. Each bus is represented by a json-object, which has a key with a json-array of all PCI devices attached to it. Each device is represented by a json-object. The bus json-object contains the following: - "bus": bus number (json-int) - "devices": a json-array of json-objects, each json-object represents a PCI device The PCI device json-object contains the following: - "bus": identical to the parent's bus number (json-int) - "slot": slot number (json-int) - "function": function number (json-int) - "class_info": a json-object containing: - "desc": device class description (json-string, optional) - "class": device class number (json-int) - "id": a json-object containing: - "device": device ID (json-int) - "vendor": vendor ID (json-int) - "irq": device's IRQ if assigned (json-int, optional) - "qdev_id": qdev id string (json-string) - "pci_bridge": It's a json-object, only present if this device is a PCI bridge, contains: - "bus": bus number (json-int) - "secondary": secondary bus number (json-int) - "subordinate": subordinate bus number (json-int) - "io_range": I/O memory range information, a json-object with the following members: - "base": base address, in bytes (json-int) - "limit": limit address, in bytes (json-int) - "memory_range": memory range information, a json-object with the following members: - "base": base address, in bytes (json-int) - "limit": limit address, in bytes (json-int) - "prefetchable_range": Prefetchable memory range information, a json-object with the following members: - "base": base address, in bytes (json-int) - "limit": limit address, in bytes (json-int) - "devices": a json-array of PCI devices if there's any attached, each each element is represented by a json-object, which contains the same members of the 'PCI device json-object' described above (optional) - "regions": a json-array of json-objects, each json-object represents a memory region of this device The memory range json-object contains the following: - "base": base memory address (json-int) - "limit": limit value (json-int) The region json-object can be an I/O region or a memory region, an I/O region json-object contains the following: - "type": "io" (json-string, fixed) - "bar": BAR number (json-int) - "address": memory address (json-int) - "size": memory size (json-int) A memory region json-object contains the following: - "type": "memory" (json-string, fixed) - "bar": BAR number (json-int) - "address": memory address (json-int) - "size": memory size (json-int) - "mem_type_64": true or false (json-bool) - "prefetch": true or false (json-bool) Example: -> { "execute": "query-pci" } <- { "return":[ { "bus":0, "devices":[ { "bus":0, "qdev_id":"", "slot":0, "class_info":{ "class":1536, "desc":"Host bridge" }, "id":{ "device":32902, "vendor":4663 }, "function":0, "regions":[ ] }, { "bus":0, "qdev_id":"", "slot":1, "class_info":{ "class":1537, "desc":"ISA bridge" }, "id":{ "device":32902, "vendor":28672 }, "function":0, "regions":[ ] }, { "bus":0, "qdev_id":"", "slot":1, "class_info":{ "class":257, "desc":"IDE controller" }, "id":{ "device":32902, "vendor":28688 }, "function":1, "regions":[ { "bar":4, "size":16, "address":49152, "type":"io" } ] }, { "bus":0, "qdev_id":"", "slot":2, "class_info":{ "class":768, "desc":"VGA controller" }, "id":{ "device":4115, "vendor":184 }, "function":0, "regions":[ { "prefetch":true, "mem_type_64":false, "bar":0, "size":33554432, "address":4026531840, "type":"memory" }, { "prefetch":false, "mem_type_64":false, "bar":1, "size":4096, "address":4060086272, "type":"memory" }, { "prefetch":false, "mem_type_64":false, "bar":6, "size":65536, "address":-1, "type":"memory" } ] }, { "bus":0, "qdev_id":"", "irq":11, "slot":4, "class_info":{ "class":1280, "desc":"RAM controller" }, "id":{ "device":6900, "vendor":4098 }, "function":0, "regions":[ { "bar":0, "size":32, "address":49280, "type":"io" } ] } ] } ] } Note: This example has been shortened as the real response is too long. EQMP STEXI @item info tlb show virtual to physical memory mappings (i386 only) @item info mem show the active virtual memory mappings (i386 only) ETEXI STEXI @item info jit show dynamic compiler info @item info kvm show KVM information @item info numa show NUMA information ETEXI STEXI @item info kvm show KVM information ETEXI SQMP query-kvm --------- Show KVM information. Return a json-object with the following information: - "enabled": true if KVM support is enabled, false otherwise (json-bool) - "present": true if QEMU has KVM support, false otherwise (json-bool) Example: -> { "execute": "query-kvm" } <- { "return": { "enabled": true, "present": true } } EQMP STEXI @item info usb show USB devices plugged on the virtual USB hub @item info usbhost show all USB host devices @item info profile show profiling information @item info capture show information about active capturing @item info snapshots show list of VM snapshots ETEXI STEXI @item info status show the current VM status (running|paused) ETEXI SQMP query-status ------------ Return a json-object with the following information: - "running": true if the VM is running, or false if it is paused (json-bool) - "singlestep": true if the VM is in single step mode, false otherwise (json-bool) Example: -> { "execute": "query-status" } <- { "return": { "running": true, "singlestep": false } } EQMP STEXI @item info pcmcia show guest PCMCIA status ETEXI STEXI @item info mice show which guest mouse is receiving events ETEXI SQMP query-mice ---------- Show VM mice information. Each mouse is represented by a json-object, the returned value is a json-array of all mice. The mouse json-object contains the following: - "name": mouse's name (json-string) - "index": mouse's index (json-int) - "current": true if this mouse is receiving events, false otherwise (json-bool) - "absolute": true if the mouse generates absolute input events (json-bool) Example: -> { "execute": "query-mice" } <- { "return":[ { "name":"QEMU Microsoft Mouse", "index":0, "current":false, "absolute":false }, { "name":"QEMU PS/2 Mouse", "index":1, "current":true, "absolute":true } ] } EQMP STEXI @item info vnc show the vnc server status ETEXI SQMP query-vnc --------- Show VNC server information. Return a json-object with server information. Connected clients are returned as a json-array of json-objects. The main json-object contains the following: - "enabled": true or false (json-bool) - "host": server's IP address (json-string) - "family": address family (json-string) - Possible values: "ipv4", "ipv6", "unix", "unknown" - "service": server's port number (json-string) - "auth": authentication method (json-string) - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight", "tls", "ultra", "unknown", "vencrypt", "vencrypt", "vencrypt+plain", "vencrypt+tls+none", "vencrypt+tls+plain", "vencrypt+tls+sasl", "vencrypt+tls+vnc", "vencrypt+x509+none", "vencrypt+x509+plain", "vencrypt+x509+sasl", "vencrypt+x509+vnc", "vnc" - "clients": a json-array of all connected clients Clients are described by a json-object, each one contain the following: - "host": client's IP address (json-string) - "family": address family (json-string) - Possible values: "ipv4", "ipv6", "unix", "unknown" - "service": client's port number (json-string) - "x509_dname": TLS dname (json-string, optional) - "sasl_username": SASL username (json-string, optional) Example: -> { "execute": "query-vnc" } <- { "return":{ "enabled":true, "host":"0.0.0.0", "service":"50402", "auth":"vnc", "family":"ipv4", "clients":[ { "host":"127.0.0.1", "service":"50401", "family":"ipv4" } ] } } EQMP STEXI @item info name show the current VM name ETEXI SQMP query-name ---------- Show VM name. Return a json-object with the following information: - "name": VM's name (json-string, optional) Example: -> { "execute": "query-name" } <- { "return": { "name": "qemu-name" } } EQMP STEXI @item info uuid show the current VM UUID ETEXI SQMP query-uuid ---------- Show VM UUID. Return a json-object with the following information: - "UUID": Universally Unique Identifier (json-string) Example: -> { "execute": "query-uuid" } <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } } EQMP STEXI @item info cpustats show CPU statistics @item info usernet show user network stack connection states ETEXI STEXI @item info migrate show migration status ETEXI SQMP query-migrate ------------- Migration status. Return a json-object. If migration is active there will be another json-object with RAM migration status and if block migration is active another one with block migration status. The main json-object contains the following: - "status": migration status (json-string) - Possible values: "active", "completed", "failed", "cancelled" - "ram": only present if "status" is "active", it is a json-object with the following RAM information (in bytes): - "transferred": amount transferred (json-int) - "remaining": amount remaining (json-int) - "total": total (json-int) - "disk": only present if "status" is "active" and it is a block migration, it is a json-object with the following disk information (in bytes): - "transferred": amount transferred (json-int) - "remaining": amount remaining (json-int) - "total": total (json-int) Examples: 1. Before the first migration -> { "execute": "query-migrate" } <- { "return": {} } 2. Migration is done and has succeeded -> { "execute": "query-migrate" } <- { "return": { "status": "completed" } } 3. Migration is done and has failed -> { "execute": "query-migrate" } <- { "return": { "status": "failed" } } 4. Migration is being performed and is not a block migration: -> { "execute": "query-migrate" } <- { "return":{ "status":"active", "ram":{ "transferred":123, "remaining":123, "total":246 } } } 5. Migration is being performed and is a block migration: -> { "execute": "query-migrate" } <- { "return":{ "status":"active", "ram":{ "total":1057024, "remaining":1053304, "transferred":3720 }, "disk":{ "total":20971520, "remaining":20880384, "transferred":91136 } } } EQMP STEXI @item info balloon show balloon information ETEXI SQMP query-balloon ------------- Show balloon information. Make an asynchronous request for balloon info. When the request completes a json-object will be returned containing the following data: - "actual": current balloon value in bytes (json-int) - "mem_swapped_in": Amount of memory swapped in bytes (json-int, optional) - "mem_swapped_out": Amount of memory swapped out in bytes (json-int, optional) - "major_page_faults": Number of major faults (json-int, optional) - "minor_page_faults": Number of minor faults (json-int, optional) - "free_mem": Total amount of free and unused memory in bytes (json-int, optional) - "total_mem": Total amount of available memory in bytes (json-int, optional) Example: -> { "execute": "query-balloon" } <- { "return":{ "actual":1073741824, "mem_swapped_in":0, "mem_swapped_out":0, "major_page_faults":142, "minor_page_faults":239245, "free_mem":1014185984, "total_mem":1044668416 } } EQMP STEXI @item info qtree show device tree @item info qdm show qdev device model list @item info roms show roms @end table ETEXI #ifdef CONFIG_SIMPLE_TRACE STEXI @item info trace show contents of trace buffer @item info trace-events show available trace events and their state ETEXI #endif HXCOMM DO NOT add new commands after 'info', move your addition before it! STEXI @end table ETEXI