/* * QEMU USB OHCI Emulation * Copyright (c) 2004 Gianni Tedesco * Copyright (c) 2006 CodeSourcery * Copyright (c) 2006 Openedhand Ltd. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, see . * * TODO: * o Isochronous transfers * o Allocate bandwidth in frames properly * o Disable timers when nothing needs to be done, or remove timer usage * all together. * o Handle unrecoverable errors properly * o BIOS work to boot from USB storage */ #include "hw.h" #include "qemu-timer.h" #include "usb.h" #include "pci.h" #include "usb-ohci.h" #include "sysbus.h" #include "qdev-addr.h" //#define DEBUG_OHCI /* Dump packet contents. */ //#define DEBUG_PACKET //#define DEBUG_ISOCH /* This causes frames to occur 1000x slower */ //#define OHCI_TIME_WARP 1 #ifdef DEBUG_OHCI #define DPRINTF printf #else #define DPRINTF(...) #endif /* Number of Downstream Ports on the root hub. */ #define OHCI_MAX_PORTS 15 static int64_t usb_frame_time; static int64_t usb_bit_time; typedef struct OHCIPort { USBPort port; uint32_t ctrl; } OHCIPort; typedef struct { USBBus bus; qemu_irq irq; MemoryRegion mem; int num_ports; const char *name; QEMUTimer *eof_timer; int64_t sof_time; /* OHCI state */ /* Control partition */ uint32_t ctl, status; uint32_t intr_status; uint32_t intr; /* memory pointer partition */ uint32_t hcca; uint32_t ctrl_head, ctrl_cur; uint32_t bulk_head, bulk_cur; uint32_t per_cur; uint32_t done; int done_count; /* Frame counter partition */ uint32_t fsmps:15; uint32_t fit:1; uint32_t fi:14; uint32_t frt:1; uint16_t frame_number; uint16_t padding; uint32_t pstart; uint32_t lst; /* Root Hub partition */ uint32_t rhdesc_a, rhdesc_b; uint32_t rhstatus; OHCIPort rhport[OHCI_MAX_PORTS]; /* PXA27x Non-OHCI events */ uint32_t hstatus; uint32_t hmask; uint32_t hreset; uint32_t htest; /* SM501 local memory offset */ target_phys_addr_t localmem_base; /* Active packets. */ uint32_t old_ctl; USBPacket usb_packet; uint8_t usb_buf[8192]; uint32_t async_td; int async_complete; } OHCIState; /* Host Controller Communications Area */ struct ohci_hcca { uint32_t intr[32]; uint16_t frame, pad; uint32_t done; }; static void ohci_bus_stop(OHCIState *ohci); static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev); /* Bitfields for the first word of an Endpoint Desciptor. */ #define OHCI_ED_FA_SHIFT 0 #define OHCI_ED_FA_MASK (0x7f<> OHCI_##field##_SHIFT) #define OHCI_SET_BM(val, field, newval) do { \ val &= ~OHCI_##field##_MASK; \ val |= ((newval) << OHCI_##field##_SHIFT) & OHCI_##field##_MASK; \ } while(0) /* endpoint descriptor */ struct ohci_ed { uint32_t flags; uint32_t tail; uint32_t head; uint32_t next; }; /* General transfer descriptor */ struct ohci_td { uint32_t flags; uint32_t cbp; uint32_t next; uint32_t be; }; /* Isochronous transfer descriptor */ struct ohci_iso_td { uint32_t flags; uint32_t bp; uint32_t next; uint32_t be; uint16_t offset[8]; }; #define USB_HZ 12000000 /* OHCI Local stuff */ #define OHCI_CTL_CBSR ((1<<0)|(1<<1)) #define OHCI_CTL_PLE (1<<2) #define OHCI_CTL_IE (1<<3) #define OHCI_CTL_CLE (1<<4) #define OHCI_CTL_BLE (1<<5) #define OHCI_CTL_HCFS ((1<<6)|(1<<7)) #define OHCI_USB_RESET 0x00 #define OHCI_USB_RESUME 0x40 #define OHCI_USB_OPERATIONAL 0x80 #define OHCI_USB_SUSPEND 0xc0 #define OHCI_CTL_IR (1<<8) #define OHCI_CTL_RWC (1<<9) #define OHCI_CTL_RWE (1<<10) #define OHCI_STATUS_HCR (1<<0) #define OHCI_STATUS_CLF (1<<1) #define OHCI_STATUS_BLF (1<<2) #define OHCI_STATUS_OCR (1<<3) #define OHCI_STATUS_SOC ((1<<6)|(1<<7)) #define OHCI_INTR_SO (1<<0) /* Scheduling overrun */ #define OHCI_INTR_WD (1<<1) /* HcDoneHead writeback */ #define OHCI_INTR_SF (1<<2) /* Start of frame */ #define OHCI_INTR_RD (1<<3) /* Resume detect */ #define OHCI_INTR_UE (1<<4) /* Unrecoverable error */ #define OHCI_INTR_FNO (1<<5) /* Frame number overflow */ #define OHCI_INTR_RHSC (1<<6) /* Root hub status change */ #define OHCI_INTR_OC (1<<30) /* Ownership change */ #define OHCI_INTR_MIE (1<<31) /* Master Interrupt Enable */ #define OHCI_HCCA_SIZE 0x100 #define OHCI_HCCA_MASK 0xffffff00 #define OHCI_EDPTR_MASK 0xfffffff0 #define OHCI_FMI_FI 0x00003fff #define OHCI_FMI_FSMPS 0xffff0000 #define OHCI_FMI_FIT 0x80000000 #define OHCI_FR_RT (1<<31) #define OHCI_LS_THRESH 0x628 #define OHCI_RHA_RW_MASK 0x00000000 /* Mask of supported features. */ #define OHCI_RHA_PSM (1<<8) #define OHCI_RHA_NPS (1<<9) #define OHCI_RHA_DT (1<<10) #define OHCI_RHA_OCPM (1<<11) #define OHCI_RHA_NOCP (1<<12) #define OHCI_RHA_POTPGT_MASK 0xff000000 #define OHCI_RHS_LPS (1<<0) #define OHCI_RHS_OCI (1<<1) #define OHCI_RHS_DRWE (1<<15) #define OHCI_RHS_LPSC (1<<16) #define OHCI_RHS_OCIC (1<<17) #define OHCI_RHS_CRWE (1<<31) #define OHCI_PORT_CCS (1<<0) #define OHCI_PORT_PES (1<<1) #define OHCI_PORT_PSS (1<<2) #define OHCI_PORT_POCI (1<<3) #define OHCI_PORT_PRS (1<<4) #define OHCI_PORT_PPS (1<<8) #define OHCI_PORT_LSDA (1<<9) #define OHCI_PORT_CSC (1<<16) #define OHCI_PORT_PESC (1<<17) #define OHCI_PORT_PSSC (1<<18) #define OHCI_PORT_OCIC (1<<19) #define OHCI_PORT_PRSC (1<<20) #define OHCI_PORT_WTC (OHCI_PORT_CSC|OHCI_PORT_PESC|OHCI_PORT_PSSC \ |OHCI_PORT_OCIC|OHCI_PORT_PRSC) #define OHCI_TD_DIR_SETUP 0x0 #define OHCI_TD_DIR_OUT 0x1 #define OHCI_TD_DIR_IN 0x2 #define OHCI_TD_DIR_RESERVED 0x3 #define OHCI_CC_NOERROR 0x0 #define OHCI_CC_CRC 0x1 #define OHCI_CC_BITSTUFFING 0x2 #define OHCI_CC_DATATOGGLEMISMATCH 0x3 #define OHCI_CC_STALL 0x4 #define OHCI_CC_DEVICENOTRESPONDING 0x5 #define OHCI_CC_PIDCHECKFAILURE 0x6 #define OHCI_CC_UNDEXPETEDPID 0x7 #define OHCI_CC_DATAOVERRUN 0x8 #define OHCI_CC_DATAUNDERRUN 0x9 #define OHCI_CC_BUFFEROVERRUN 0xc #define OHCI_CC_BUFFERUNDERRUN 0xd #define OHCI_HRESET_FSBIR (1 << 0) /* Update IRQ levels */ static inline void ohci_intr_update(OHCIState *ohci) { int level = 0; if ((ohci->intr & OHCI_INTR_MIE) && (ohci->intr_status & ohci->intr)) level = 1; qemu_set_irq(ohci->irq, level); } /* Set an interrupt */ static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr) { ohci->intr_status |= intr; ohci_intr_update(ohci); } /* Attach or detach a device on a root hub port. */ static void ohci_attach(USBPort *port1) { OHCIState *s = port1->opaque; OHCIPort *port = &s->rhport[port1->index]; uint32_t old_state = port->ctrl; /* set connect status */ port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC; /* update speed */ if (port->port.dev->speed == USB_SPEED_LOW) { port->ctrl |= OHCI_PORT_LSDA; } else { port->ctrl &= ~OHCI_PORT_LSDA; } /* notify of remote-wakeup */ if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { ohci_set_interrupt(s, OHCI_INTR_RD); } DPRINTF("usb-ohci: Attached port %d\n", port1->index); if (old_state != port->ctrl) { ohci_set_interrupt(s, OHCI_INTR_RHSC); } } static void ohci_detach(USBPort *port1) { OHCIState *s = port1->opaque; OHCIPort *port = &s->rhport[port1->index]; uint32_t old_state = port->ctrl; ohci_async_cancel_device(s, port1->dev); /* set connect status */ if (port->ctrl & OHCI_PORT_CCS) { port->ctrl &= ~OHCI_PORT_CCS; port->ctrl |= OHCI_PORT_CSC; } /* disable port */ if (port->ctrl & OHCI_PORT_PES) { port->ctrl &= ~OHCI_PORT_PES; port->ctrl |= OHCI_PORT_PESC; } DPRINTF("usb-ohci: Detached port %d\n", port1->index); if (old_state != port->ctrl) { ohci_set_interrupt(s, OHCI_INTR_RHSC); } } static void ohci_wakeup(USBPort *port1) { OHCIState *s = port1->opaque; OHCIPort *port = &s->rhport[port1->index]; uint32_t intr = 0; if (port->ctrl & OHCI_PORT_PSS) { DPRINTF("usb-ohci: port %d: wakeup\n", port1->index); port->ctrl |= OHCI_PORT_PSSC; port->ctrl &= ~OHCI_PORT_PSS; intr = OHCI_INTR_RHSC; } /* Note that the controller can be suspended even if this port is not */ if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) { DPRINTF("usb-ohci: remote-wakeup: SUSPEND->RESUME\n"); /* This is the one state transition the controller can do by itself */ s->ctl &= ~OHCI_CTL_HCFS; s->ctl |= OHCI_USB_RESUME; /* In suspend mode only ResumeDetected is possible, not RHSC: * see the OHCI spec 5.1.2.3. */ intr = OHCI_INTR_RD; } ohci_set_interrupt(s, intr); } static void ohci_child_detach(USBPort *port1, USBDevice *child) { OHCIState *s = port1->opaque; ohci_async_cancel_device(s, child); } /* Reset the controller */ static void ohci_reset(void *opaque) { OHCIState *ohci = opaque; OHCIPort *port; int i; ohci_bus_stop(ohci); ohci->ctl = 0; ohci->old_ctl = 0; ohci->status = 0; ohci->intr_status = 0; ohci->intr = OHCI_INTR_MIE; ohci->hcca = 0; ohci->ctrl_head = ohci->ctrl_cur = 0; ohci->bulk_head = ohci->bulk_cur = 0; ohci->per_cur = 0; ohci->done = 0; ohci->done_count = 7; /* FSMPS is marked TBD in OCHI 1.0, what gives ffs? * I took the value linux sets ... */ ohci->fsmps = 0x2778; ohci->fi = 0x2edf; ohci->fit = 0; ohci->frt = 0; ohci->frame_number = 0; ohci->pstart = 0; ohci->lst = OHCI_LS_THRESH; ohci->rhdesc_a = OHCI_RHA_NPS | ohci->num_ports; ohci->rhdesc_b = 0x0; /* Impl. specific */ ohci->rhstatus = 0; for (i = 0; i < ohci->num_ports; i++) { port = &ohci->rhport[i]; port->ctrl = 0; if (port->port.dev && port->port.dev->attached) { usb_reset(&port->port); } } if (ohci->async_td) { usb_cancel_packet(&ohci->usb_packet); ohci->async_td = 0; } DPRINTF("usb-ohci: Reset %s\n", ohci->name); } /* Get an array of dwords from main memory */ static inline int get_dwords(OHCIState *ohci, uint32_t addr, uint32_t *buf, int num) { int i; addr += ohci->localmem_base; for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { cpu_physical_memory_read(addr, buf, sizeof(*buf)); *buf = le32_to_cpu(*buf); } return 1; } /* Put an array of dwords in to main memory */ static inline int put_dwords(OHCIState *ohci, uint32_t addr, uint32_t *buf, int num) { int i; addr += ohci->localmem_base; for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { uint32_t tmp = cpu_to_le32(*buf); cpu_physical_memory_write(addr, &tmp, sizeof(tmp)); } return 1; } /* Get an array of words from main memory */ static inline int get_words(OHCIState *ohci, uint32_t addr, uint16_t *buf, int num) { int i; addr += ohci->localmem_base; for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { cpu_physical_memory_read(addr, buf, sizeof(*buf)); *buf = le16_to_cpu(*buf); } return 1; } /* Put an array of words in to main memory */ static inline int put_words(OHCIState *ohci, uint32_t addr, uint16_t *buf, int num) { int i; addr += ohci->localmem_base; for (i = 0; i < num; i++, buf++, addr += sizeof(*buf)) { uint16_t tmp = cpu_to_le16(*buf); cpu_physical_memory_write(addr, &tmp, sizeof(tmp)); } return 1; } static inline int ohci_read_ed(OHCIState *ohci, uint32_t addr, struct ohci_ed *ed) { return get_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); } static inline int ohci_read_td(OHCIState *ohci, uint32_t addr, struct ohci_td *td) { return get_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); } static inline int ohci_read_iso_td(OHCIState *ohci, uint32_t addr, struct ohci_iso_td *td) { return (get_dwords(ohci, addr, (uint32_t *)td, 4) && get_words(ohci, addr + 16, td->offset, 8)); } static inline int ohci_read_hcca(OHCIState *ohci, uint32_t addr, struct ohci_hcca *hcca) { cpu_physical_memory_read(addr + ohci->localmem_base, hcca, sizeof(*hcca)); return 1; } static inline int ohci_put_ed(OHCIState *ohci, uint32_t addr, struct ohci_ed *ed) { return put_dwords(ohci, addr, (uint32_t *)ed, sizeof(*ed) >> 2); } static inline int ohci_put_td(OHCIState *ohci, uint32_t addr, struct ohci_td *td) { return put_dwords(ohci, addr, (uint32_t *)td, sizeof(*td) >> 2); } static inline int ohci_put_iso_td(OHCIState *ohci, uint32_t addr, struct ohci_iso_td *td) { return (put_dwords(ohci, addr, (uint32_t *)td, 4) && put_words(ohci, addr + 16, td->offset, 8)); } static inline int ohci_put_hcca(OHCIState *ohci, uint32_t addr, struct ohci_hcca *hcca) { cpu_physical_memory_write(addr + ohci->localmem_base, hcca, sizeof(*hcca)); return 1; } /* Read/Write the contents of a TD from/to main memory. */ static void ohci_copy_td(OHCIState *ohci, struct ohci_td *td, uint8_t *buf, int len, int write) { uint32_t ptr; uint32_t n; ptr = td->cbp; n = 0x1000 - (ptr & 0xfff); if (n > len) n = len; cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write); if (n == len) return; ptr = td->be & ~0xfffu; buf += n; cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write); } /* Read/Write the contents of an ISO TD from/to main memory. */ static void ohci_copy_iso_td(OHCIState *ohci, uint32_t start_addr, uint32_t end_addr, uint8_t *buf, int len, int write) { uint32_t ptr; uint32_t n; ptr = start_addr; n = 0x1000 - (ptr & 0xfff); if (n > len) n = len; cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, n, write); if (n == len) return; ptr = end_addr & ~0xfffu; buf += n; cpu_physical_memory_rw(ptr + ohci->localmem_base, buf, len - n, write); } static void ohci_process_lists(OHCIState *ohci, int completion); static void ohci_async_complete_packet(USBPort *port, USBPacket *packet) { OHCIState *ohci = container_of(packet, OHCIState, usb_packet); #ifdef DEBUG_PACKET DPRINTF("Async packet complete\n"); #endif ohci->async_complete = 1; ohci_process_lists(ohci, 1); } #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b))) static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed, int completion) { int dir; size_t len = 0; #ifdef DEBUG_ISOCH const char *str = NULL; #endif int pid; int ret; int i; USBDevice *dev; struct ohci_iso_td iso_td; uint32_t addr; uint16_t starting_frame; int16_t relative_frame_number; int frame_count; uint32_t start_offset, next_offset, end_offset = 0; uint32_t start_addr, end_addr; addr = ed->head & OHCI_DPTR_MASK; if (!ohci_read_iso_td(ohci, addr, &iso_td)) { printf("usb-ohci: ISO_TD read error at %x\n", addr); return 0; } starting_frame = OHCI_BM(iso_td.flags, TD_SF); frame_count = OHCI_BM(iso_td.flags, TD_FC); relative_frame_number = USUB(ohci->frame_number, starting_frame); #ifdef DEBUG_ISOCH printf("--- ISO_TD ED head 0x%.8x tailp 0x%.8x\n" "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" "0x%.8x 0x%.8x 0x%.8x 0x%.8x\n" "frame_number 0x%.8x starting_frame 0x%.8x\n" "frame_count 0x%.8x relative %d\n" "di 0x%.8x cc 0x%.8x\n", ed->head & OHCI_DPTR_MASK, ed->tail & OHCI_DPTR_MASK, iso_td.flags, iso_td.bp, iso_td.next, iso_td.be, iso_td.offset[0], iso_td.offset[1], iso_td.offset[2], iso_td.offset[3], iso_td.offset[4], iso_td.offset[5], iso_td.offset[6], iso_td.offset[7], ohci->frame_number, starting_frame, frame_count, relative_frame_number, OHCI_BM(iso_td.flags, TD_DI), OHCI_BM(iso_td.flags, TD_CC)); #endif if (relative_frame_number < 0) { DPRINTF("usb-ohci: ISO_TD R=%d < 0\n", relative_frame_number); return 1; } else if (relative_frame_number > frame_count) { /* ISO TD expired - retire the TD to the Done Queue and continue with the next ISO TD of the same ED */ DPRINTF("usb-ohci: ISO_TD R=%d > FC=%d\n", relative_frame_number, frame_count); OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_DATAOVERRUN); ed->head &= ~OHCI_DPTR_MASK; ed->head |= (iso_td.next & OHCI_DPTR_MASK); iso_td.next = ohci->done; ohci->done = addr; i = OHCI_BM(iso_td.flags, TD_DI); if (i < ohci->done_count) ohci->done_count = i; ohci_put_iso_td(ohci, addr, &iso_td); return 0; } dir = OHCI_BM(ed->flags, ED_D); switch (dir) { case OHCI_TD_DIR_IN: #ifdef DEBUG_ISOCH str = "in"; #endif pid = USB_TOKEN_IN; break; case OHCI_TD_DIR_OUT: #ifdef DEBUG_ISOCH str = "out"; #endif pid = USB_TOKEN_OUT; break; case OHCI_TD_DIR_SETUP: #ifdef DEBUG_ISOCH str = "setup"; #endif pid = USB_TOKEN_SETUP; break; default: printf("usb-ohci: Bad direction %d\n", dir); return 1; } if (!iso_td.bp || !iso_td.be) { printf("usb-ohci: ISO_TD bp 0x%.8x be 0x%.8x\n", iso_td.bp, iso_td.be); return 1; } start_offset = iso_td.offset[relative_frame_number]; next_offset = iso_td.offset[relative_frame_number + 1]; if (!(OHCI_BM(start_offset, TD_PSW_CC) & 0xe) || ((relative_frame_number < frame_count) && !(OHCI_BM(next_offset, TD_PSW_CC) & 0xe))) { printf("usb-ohci: ISO_TD cc != not accessed 0x%.8x 0x%.8x\n", start_offset, next_offset); return 1; } if ((relative_frame_number < frame_count) && (start_offset > next_offset)) { printf("usb-ohci: ISO_TD start_offset=0x%.8x > next_offset=0x%.8x\n", start_offset, next_offset); return 1; } if ((start_offset & 0x1000) == 0) { start_addr = (iso_td.bp & OHCI_PAGE_MASK) | (start_offset & OHCI_OFFSET_MASK); } else { start_addr = (iso_td.be & OHCI_PAGE_MASK) | (start_offset & OHCI_OFFSET_MASK); } if (relative_frame_number < frame_count) { end_offset = next_offset - 1; if ((end_offset & 0x1000) == 0) { end_addr = (iso_td.bp & OHCI_PAGE_MASK) | (end_offset & OHCI_OFFSET_MASK); } else { end_addr = (iso_td.be & OHCI_PAGE_MASK) | (end_offset & OHCI_OFFSET_MASK); } } else { /* Last packet in the ISO TD */ end_addr = iso_td.be; } if ((start_addr & OHCI_PAGE_MASK) != (end_addr & OHCI_PAGE_MASK)) { len = (end_addr & OHCI_OFFSET_MASK) + 0x1001 - (start_addr & OHCI_OFFSET_MASK); } else { len = end_addr - start_addr + 1; } if (len && dir != OHCI_TD_DIR_IN) { ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len, 0); } if (completion) { ret = ohci->usb_packet.result; } else { ret = USB_RET_NODEV; for (i = 0; i < ohci->num_ports; i++) { dev = ohci->rhport[i].port.dev; if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) continue; usb_packet_setup(&ohci->usb_packet, pid, OHCI_BM(ed->flags, ED_FA), OHCI_BM(ed->flags, ED_EN)); usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len); ret = usb_handle_packet(dev, &ohci->usb_packet); if (ret != USB_RET_NODEV) break; } if (ret == USB_RET_ASYNC) { return 1; } } #ifdef DEBUG_ISOCH printf("so 0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d\n", start_offset, end_offset, start_addr, end_addr, str, len, ret); #endif /* Writeback */ if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) { /* IN transfer succeeded */ ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret, 1); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_NOERROR); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, ret); } else if (dir == OHCI_TD_DIR_OUT && ret == len) { /* OUT transfer succeeded */ OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_NOERROR); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); } else { if (ret > (ssize_t) len) { printf("usb-ohci: DataOverrun %d > %zu\n", ret, len); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_DATAOVERRUN); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, len); } else if (ret >= 0) { printf("usb-ohci: DataUnderrun %d\n", ret); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_DATAUNDERRUN); } else { switch (ret) { case USB_RET_NODEV: OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_DEVICENOTRESPONDING); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); break; case USB_RET_NAK: case USB_RET_STALL: printf("usb-ohci: got NAK/STALL %d\n", ret); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_STALL); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_SIZE, 0); break; default: printf("usb-ohci: Bad device response %d\n", ret); OHCI_SET_BM(iso_td.offset[relative_frame_number], TD_PSW_CC, OHCI_CC_UNDEXPETEDPID); break; } } } if (relative_frame_number == frame_count) { /* Last data packet of ISO TD - retire the TD to the Done Queue */ OHCI_SET_BM(iso_td.flags, TD_CC, OHCI_CC_NOERROR); ed->head &= ~OHCI_DPTR_MASK; ed->head |= (iso_td.next & OHCI_DPTR_MASK); iso_td.next = ohci->done; ohci->done = addr; i = OHCI_BM(iso_td.flags, TD_DI); if (i < ohci->done_count) ohci->done_count = i; } ohci_put_iso_td(ohci, addr, &iso_td); return 1; } /* Service a transport descriptor. Returns nonzero to terminate processing of this endpoint. */ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed) { int dir; size_t len = 0, pktlen = 0; #ifdef DEBUG_PACKET const char *str = NULL; #endif int pid; int ret; int i; USBDevice *dev; struct ohci_td td; uint32_t addr; int flag_r; int completion; addr = ed->head & OHCI_DPTR_MASK; /* See if this TD has already been submitted to the device. */ completion = (addr == ohci->async_td); if (completion && !ohci->async_complete) { #ifdef DEBUG_PACKET DPRINTF("Skipping async TD\n"); #endif return 1; } if (!ohci_read_td(ohci, addr, &td)) { fprintf(stderr, "usb-ohci: TD read error at %x\n", addr); return 0; } dir = OHCI_BM(ed->flags, ED_D); switch (dir) { case OHCI_TD_DIR_OUT: case OHCI_TD_DIR_IN: /* Same value. */ break; default: dir = OHCI_BM(td.flags, TD_DP); break; } switch (dir) { case OHCI_TD_DIR_IN: #ifdef DEBUG_PACKET str = "in"; #endif pid = USB_TOKEN_IN; break; case OHCI_TD_DIR_OUT: #ifdef DEBUG_PACKET str = "out"; #endif pid = USB_TOKEN_OUT; break; case OHCI_TD_DIR_SETUP: #ifdef DEBUG_PACKET str = "setup"; #endif pid = USB_TOKEN_SETUP; break; default: fprintf(stderr, "usb-ohci: Bad direction\n"); return 1; } if (td.cbp && td.be) { if ((td.cbp & 0xfffff000) != (td.be & 0xfffff000)) { len = (td.be & 0xfff) + 0x1001 - (td.cbp & 0xfff); } else { len = (td.be - td.cbp) + 1; } pktlen = len; if (len && dir != OHCI_TD_DIR_IN) { /* The endpoint may not allow us to transfer it all now */ pktlen = (ed->flags & OHCI_ED_MPS_MASK) >> OHCI_ED_MPS_SHIFT; if (pktlen > len) { pktlen = len; } if (!completion) { ohci_copy_td(ohci, &td, ohci->usb_buf, pktlen, 0); } } } flag_r = (td.flags & OHCI_TD_R) != 0; #ifdef DEBUG_PACKET DPRINTF(" TD @ 0x%.8x %" PRId64 " of %" PRId64 " bytes %s r=%d cbp=0x%.8x be=0x%.8x\n", addr, (int64_t)pktlen, (int64_t)len, str, flag_r, td.cbp, td.be); if (pktlen > 0 && dir != OHCI_TD_DIR_IN) { DPRINTF(" data:"); for (i = 0; i < pktlen; i++) { printf(" %.2x", ohci->usb_buf[i]); } DPRINTF("\n"); } #endif if (completion) { ret = ohci->usb_packet.result; ohci->async_td = 0; ohci->async_complete = 0; } else { ret = USB_RET_NODEV; for (i = 0; i < ohci->num_ports; i++) { dev = ohci->rhport[i].port.dev; if ((ohci->rhport[i].ctrl & OHCI_PORT_PES) == 0) continue; if (ohci->async_td) { /* ??? The hardware should allow one active packet per endpoint. We only allow one active packet per controller. This should be sufficient as long as devices respond in a timely manner. */ #ifdef DEBUG_PACKET DPRINTF("Too many pending packets\n"); #endif return 1; } usb_packet_setup(&ohci->usb_packet, pid, OHCI_BM(ed->flags, ED_FA), OHCI_BM(ed->flags, ED_EN)); usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen); ret = usb_handle_packet(dev, &ohci->usb_packet); if (ret != USB_RET_NODEV) break; } #ifdef DEBUG_PACKET DPRINTF("ret=%d\n", ret); #endif if (ret == USB_RET_ASYNC) { ohci->async_td = addr; return 1; } } if (ret >= 0) { if (dir == OHCI_TD_DIR_IN) { ohci_copy_td(ohci, &td, ohci->usb_buf, ret, 1); #ifdef DEBUG_PACKET DPRINTF(" data:"); for (i = 0; i < ret; i++) printf(" %.2x", ohci->usb_buf[i]); DPRINTF("\n"); #endif } else { ret = pktlen; } } /* Writeback */ if (ret == pktlen || (dir == OHCI_TD_DIR_IN && ret >= 0 && flag_r)) { /* Transmission succeeded. */ if (ret == len) { td.cbp = 0; } else { if ((td.cbp & 0xfff) + ret > 0xfff) { td.cbp = (td.be & ~0xfff) + ((td.cbp + ret) & 0xfff); } else { td.cbp += ret; } } td.flags |= OHCI_TD_T1; td.flags ^= OHCI_TD_T0; OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_NOERROR); OHCI_SET_BM(td.flags, TD_EC, 0); if ((dir != OHCI_TD_DIR_IN) && (ret != len)) { /* Partial packet transfer: TD not ready to retire yet */ goto exit_no_retire; } /* Setting ED_C is part of the TD retirement process */ ed->head &= ~OHCI_ED_C; if (td.flags & OHCI_TD_T0) ed->head |= OHCI_ED_C; } else { if (ret >= 0) { DPRINTF("usb-ohci: Underrun\n"); OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAUNDERRUN); } else { switch (ret) { case USB_RET_NODEV: OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DEVICENOTRESPONDING); case USB_RET_NAK: DPRINTF("usb-ohci: got NAK\n"); return 1; case USB_RET_STALL: DPRINTF("usb-ohci: got STALL\n"); OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_STALL); break; case USB_RET_BABBLE: DPRINTF("usb-ohci: got BABBLE\n"); OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_DATAOVERRUN); break; default: fprintf(stderr, "usb-ohci: Bad device response %d\n", ret); OHCI_SET_BM(td.flags, TD_CC, OHCI_CC_UNDEXPETEDPID); OHCI_SET_BM(td.flags, TD_EC, 3); break; } } ed->head |= OHCI_ED_H; } /* Retire this TD */ ed->head &= ~OHCI_DPTR_MASK; ed->head |= td.next & OHCI_DPTR_MASK; td.next = ohci->done; ohci->done = addr; i = OHCI_BM(td.flags, TD_DI); if (i < ohci->done_count) ohci->done_count = i; exit_no_retire: ohci_put_td(ohci, addr, &td); return OHCI_BM(td.flags, TD_CC) != OHCI_CC_NOERROR; } /* Service an endpoint list. Returns nonzero if active TD were found. */ static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion) { struct ohci_ed ed; uint32_t next_ed; uint32_t cur; int active; active = 0; if (head == 0) return 0; for (cur = head; cur; cur = next_ed) { if (!ohci_read_ed(ohci, cur, &ed)) { fprintf(stderr, "usb-ohci: ED read error at %x\n", cur); return 0; } next_ed = ed.next & OHCI_DPTR_MASK; if ((ed.head & OHCI_ED_H) || (ed.flags & OHCI_ED_K)) { uint32_t addr; /* Cancel pending packets for ED that have been paused. */ addr = ed.head & OHCI_DPTR_MASK; if (ohci->async_td && addr == ohci->async_td) { usb_cancel_packet(&ohci->usb_packet); ohci->async_td = 0; } continue; } while ((ed.head & OHCI_DPTR_MASK) != ed.tail) { #ifdef DEBUG_PACKET DPRINTF("ED @ 0x%.8x fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u " "h=%u c=%u\n head=0x%.8x tailp=0x%.8x next=0x%.8x\n", cur, OHCI_BM(ed.flags, ED_FA), OHCI_BM(ed.flags, ED_EN), OHCI_BM(ed.flags, ED_D), (ed.flags & OHCI_ED_S)!= 0, (ed.flags & OHCI_ED_K) != 0, (ed.flags & OHCI_ED_F) != 0, OHCI_BM(ed.flags, ED_MPS), (ed.head & OHCI_ED_H) != 0, (ed.head & OHCI_ED_C) != 0, ed.head & OHCI_DPTR_MASK, ed.tail & OHCI_DPTR_MASK, ed.next & OHCI_DPTR_MASK); #endif active = 1; if ((ed.flags & OHCI_ED_F) == 0) { if (ohci_service_td(ohci, &ed)) break; } else { /* Handle isochronous endpoints */ if (ohci_service_iso_td(ohci, &ed, completion)) break; } } ohci_put_ed(ohci, cur, &ed); } return active; } /* Generate a SOF event, and set a timer for EOF */ static void ohci_sof(OHCIState *ohci) { ohci->sof_time = qemu_get_clock_ns(vm_clock); qemu_mod_timer(ohci->eof_timer, ohci->sof_time + usb_frame_time); ohci_set_interrupt(ohci, OHCI_INTR_SF); } /* Process Control and Bulk lists. */ static void ohci_process_lists(OHCIState *ohci, int completion) { if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) { if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) { DPRINTF("usb-ohci: head %x, cur %x\n", ohci->ctrl_head, ohci->ctrl_cur); } if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) { ohci->ctrl_cur = 0; ohci->status &= ~OHCI_STATUS_CLF; } } if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) { if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) { ohci->bulk_cur = 0; ohci->status &= ~OHCI_STATUS_BLF; } } } /* Do frame processing on frame boundary */ static void ohci_frame_boundary(void *opaque) { OHCIState *ohci = opaque; struct ohci_hcca hcca; ohci_read_hcca(ohci, ohci->hcca, &hcca); /* Process all the lists at the end of the frame */ if (ohci->ctl & OHCI_CTL_PLE) { int n; n = ohci->frame_number & 0x1f; ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0); } /* Cancel all pending packets if either of the lists has been disabled. */ if (ohci->async_td && ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) { usb_cancel_packet(&ohci->usb_packet); ohci->async_td = 0; } ohci->old_ctl = ohci->ctl; ohci_process_lists(ohci, 0); /* Frame boundary, so do EOF stuf here */ ohci->frt = ohci->fit; /* Increment frame number and take care of endianness. */ ohci->frame_number = (ohci->frame_number + 1) & 0xffff; hcca.frame = cpu_to_le16(ohci->frame_number); if (ohci->done_count == 0 && !(ohci->intr_status & OHCI_INTR_WD)) { if (!ohci->done) abort(); if (ohci->intr & ohci->intr_status) ohci->done |= 1; hcca.done = cpu_to_le32(ohci->done); ohci->done = 0; ohci->done_count = 7; ohci_set_interrupt(ohci, OHCI_INTR_WD); } if (ohci->done_count != 7 && ohci->done_count != 0) ohci->done_count--; /* Do SOF stuff here */ ohci_sof(ohci); /* Writeback HCCA */ ohci_put_hcca(ohci, ohci->hcca, &hcca); } /* Start sending SOF tokens across the USB bus, lists are processed in * next frame */ static int ohci_bus_start(OHCIState *ohci) { ohci->eof_timer = qemu_new_timer_ns(vm_clock, ohci_frame_boundary, ohci); if (ohci->eof_timer == NULL) { fprintf(stderr, "usb-ohci: %s: qemu_new_timer_ns failed\n", ohci->name); /* TODO: Signal unrecoverable error */ return 0; } DPRINTF("usb-ohci: %s: USB Operational\n", ohci->name); ohci_sof(ohci); return 1; } /* Stop sending SOF tokens on the bus */ static void ohci_bus_stop(OHCIState *ohci) { if (ohci->eof_timer) qemu_del_timer(ohci->eof_timer); ohci->eof_timer = NULL; } /* Sets a flag in a port status register but only set it if the port is * connected, if not set ConnectStatusChange flag. If flag is enabled * return 1. */ static int ohci_port_set_if_connected(OHCIState *ohci, int i, uint32_t val) { int ret = 1; /* writing a 0 has no effect */ if (val == 0) return 0; /* If CurrentConnectStatus is cleared we set * ConnectStatusChange */ if (!(ohci->rhport[i].ctrl & OHCI_PORT_CCS)) { ohci->rhport[i].ctrl |= OHCI_PORT_CSC; if (ohci->rhstatus & OHCI_RHS_DRWE) { /* TODO: CSC is a wakeup event */ } return 0; } if (ohci->rhport[i].ctrl & val) ret = 0; /* set the bit */ ohci->rhport[i].ctrl |= val; return ret; } /* Set the frame interval - frame interval toggle is manipulated by the hcd only */ static void ohci_set_frame_interval(OHCIState *ohci, uint16_t val) { val &= OHCI_FMI_FI; if (val != ohci->fi) { DPRINTF("usb-ohci: %s: FrameInterval = 0x%x (%u)\n", ohci->name, ohci->fi, ohci->fi); } ohci->fi = val; } static void ohci_port_power(OHCIState *ohci, int i, int p) { if (p) { ohci->rhport[i].ctrl |= OHCI_PORT_PPS; } else { ohci->rhport[i].ctrl &= ~(OHCI_PORT_PPS| OHCI_PORT_CCS| OHCI_PORT_PSS| OHCI_PORT_PRS); } } /* Set HcControlRegister */ static void ohci_set_ctl(OHCIState *ohci, uint32_t val) { uint32_t old_state; uint32_t new_state; old_state = ohci->ctl & OHCI_CTL_HCFS; ohci->ctl = val; new_state = ohci->ctl & OHCI_CTL_HCFS; /* no state change */ if (old_state == new_state) return; switch (new_state) { case OHCI_USB_OPERATIONAL: ohci_bus_start(ohci); break; case OHCI_USB_SUSPEND: ohci_bus_stop(ohci); DPRINTF("usb-ohci: %s: USB Suspended\n", ohci->name); break; case OHCI_USB_RESUME: DPRINTF("usb-ohci: %s: USB Resume\n", ohci->name); break; case OHCI_USB_RESET: ohci_reset(ohci); DPRINTF("usb-ohci: %s: USB Reset\n", ohci->name); break; } } static uint32_t ohci_get_frame_remaining(OHCIState *ohci) { uint16_t fr; int64_t tks; if ((ohci->ctl & OHCI_CTL_HCFS) != OHCI_USB_OPERATIONAL) return (ohci->frt << 31); /* Being in USB operational state guarnatees sof_time was * set already. */ tks = qemu_get_clock_ns(vm_clock) - ohci->sof_time; /* avoid muldiv if possible */ if (tks >= usb_frame_time) return (ohci->frt << 31); tks = muldiv64(1, tks, usb_bit_time); fr = (uint16_t)(ohci->fi - tks); return (ohci->frt << 31) | fr; } /* Set root hub status */ static void ohci_set_hub_status(OHCIState *ohci, uint32_t val) { uint32_t old_state; old_state = ohci->rhstatus; /* write 1 to clear OCIC */ if (val & OHCI_RHS_OCIC) ohci->rhstatus &= ~OHCI_RHS_OCIC; if (val & OHCI_RHS_LPS) { int i; for (i = 0; i < ohci->num_ports; i++) ohci_port_power(ohci, i, 0); DPRINTF("usb-ohci: powered down all ports\n"); } if (val & OHCI_RHS_LPSC) { int i; for (i = 0; i < ohci->num_ports; i++) ohci_port_power(ohci, i, 1); DPRINTF("usb-ohci: powered up all ports\n"); } if (val & OHCI_RHS_DRWE) ohci->rhstatus |= OHCI_RHS_DRWE; if (val & OHCI_RHS_CRWE) ohci->rhstatus &= ~OHCI_RHS_DRWE; if (old_state != ohci->rhstatus) ohci_set_interrupt(ohci, OHCI_INTR_RHSC); } /* Set root hub port status */ static void ohci_port_set_status(OHCIState *ohci, int portnum, uint32_t val) { uint32_t old_state; OHCIPort *port; port = &ohci->rhport[portnum]; old_state = port->ctrl; /* Write to clear CSC, PESC, PSSC, OCIC, PRSC */ if (val & OHCI_PORT_WTC) port->ctrl &= ~(val & OHCI_PORT_WTC); if (val & OHCI_PORT_CCS) port->ctrl &= ~OHCI_PORT_PES; ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PES); if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PSS)) { DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); } if (ohci_port_set_if_connected(ohci, portnum, val & OHCI_PORT_PRS)) { DPRINTF("usb-ohci: port %d: RESET\n", portnum); usb_send_msg(port->port.dev, USB_MSG_RESET); port->ctrl &= ~OHCI_PORT_PRS; /* ??? Should this also set OHCI_PORT_PESC. */ port->ctrl |= OHCI_PORT_PES | OHCI_PORT_PRSC; } /* Invert order here to ensure in ambiguous case, device is * powered up... */ if (val & OHCI_PORT_LSDA) ohci_port_power(ohci, portnum, 0); if (val & OHCI_PORT_PPS) ohci_port_power(ohci, portnum, 1); if (old_state != port->ctrl) ohci_set_interrupt(ohci, OHCI_INTR_RHSC); return; } static uint64_t ohci_mem_read(void *opaque, target_phys_addr_t addr, unsigned size) { OHCIState *ohci = opaque; uint32_t retval; /* Only aligned reads are allowed on OHCI */ if (addr & 3) { fprintf(stderr, "usb-ohci: Mis-aligned read\n"); return 0xffffffff; } else if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { /* HcRhPortStatus */ retval = ohci->rhport[(addr - 0x54) >> 2].ctrl | OHCI_PORT_PPS; } else { switch (addr >> 2) { case 0: /* HcRevision */ retval = 0x10; break; case 1: /* HcControl */ retval = ohci->ctl; break; case 2: /* HcCommandStatus */ retval = ohci->status; break; case 3: /* HcInterruptStatus */ retval = ohci->intr_status; break; case 4: /* HcInterruptEnable */ case 5: /* HcInterruptDisable */ retval = ohci->intr; break; case 6: /* HcHCCA */ retval = ohci->hcca; break; case 7: /* HcPeriodCurrentED */ retval = ohci->per_cur; break; case 8: /* HcControlHeadED */ retval = ohci->ctrl_head; break; case 9: /* HcControlCurrentED */ retval = ohci->ctrl_cur; break; case 10: /* HcBulkHeadED */ retval = ohci->bulk_head; break; case 11: /* HcBulkCurrentED */ retval = ohci->bulk_cur; break; case 12: /* HcDoneHead */ retval = ohci->done; break; case 13: /* HcFmInterretval */ retval = (ohci->fit << 31) | (ohci->fsmps << 16) | (ohci->fi); break; case 14: /* HcFmRemaining */ retval = ohci_get_frame_remaining(ohci); break; case 15: /* HcFmNumber */ retval = ohci->frame_number; break; case 16: /* HcPeriodicStart */ retval = ohci->pstart; break; case 17: /* HcLSThreshold */ retval = ohci->lst; break; case 18: /* HcRhDescriptorA */ retval = ohci->rhdesc_a; break; case 19: /* HcRhDescriptorB */ retval = ohci->rhdesc_b; break; case 20: /* HcRhStatus */ retval = ohci->rhstatus; break; /* PXA27x specific registers */ case 24: /* HcStatus */ retval = ohci->hstatus & ohci->hmask; break; case 25: /* HcHReset */ retval = ohci->hreset; break; case 26: /* HcHInterruptEnable */ retval = ohci->hmask; break; case 27: /* HcHInterruptTest */ retval = ohci->htest; break; default: fprintf(stderr, "ohci_read: Bad offset %x\n", (int)addr); retval = 0xffffffff; } } return retval; } static void ohci_mem_write(void *opaque, target_phys_addr_t addr, uint64_t val, unsigned size) { OHCIState *ohci = opaque; /* Only aligned reads are allowed on OHCI */ if (addr & 3) { fprintf(stderr, "usb-ohci: Mis-aligned write\n"); return; } if (addr >= 0x54 && addr < 0x54 + ohci->num_ports * 4) { /* HcRhPortStatus */ ohci_port_set_status(ohci, (addr - 0x54) >> 2, val); return; } switch (addr >> 2) { case 1: /* HcControl */ ohci_set_ctl(ohci, val); break; case 2: /* HcCommandStatus */ /* SOC is read-only */ val = (val & ~OHCI_STATUS_SOC); /* Bits written as '0' remain unchanged in the register */ ohci->status |= val; if (ohci->status & OHCI_STATUS_HCR) ohci_reset(ohci); break; case 3: /* HcInterruptStatus */ ohci->intr_status &= ~val; ohci_intr_update(ohci); break; case 4: /* HcInterruptEnable */ ohci->intr |= val; ohci_intr_update(ohci); break; case 5: /* HcInterruptDisable */ ohci->intr &= ~val; ohci_intr_update(ohci); break; case 6: /* HcHCCA */ ohci->hcca = val & OHCI_HCCA_MASK; break; case 7: /* HcPeriodCurrentED */ /* Ignore writes to this read-only register, Linux does them */ break; case 8: /* HcControlHeadED */ ohci->ctrl_head = val & OHCI_EDPTR_MASK; break; case 9: /* HcControlCurrentED */ ohci->ctrl_cur = val & OHCI_EDPTR_MASK; break; case 10: /* HcBulkHeadED */ ohci->bulk_head = val & OHCI_EDPTR_MASK; break; case 11: /* HcBulkCurrentED */ ohci->bulk_cur = val & OHCI_EDPTR_MASK; break; case 13: /* HcFmInterval */ ohci->fsmps = (val & OHCI_FMI_FSMPS) >> 16; ohci->fit = (val & OHCI_FMI_FIT) >> 31; ohci_set_frame_interval(ohci, val); break; case 15: /* HcFmNumber */ break; case 16: /* HcPeriodicStart */ ohci->pstart = val & 0xffff; break; case 17: /* HcLSThreshold */ ohci->lst = val & 0xffff; break; case 18: /* HcRhDescriptorA */ ohci->rhdesc_a &= ~OHCI_RHA_RW_MASK; ohci->rhdesc_a |= val & OHCI_RHA_RW_MASK; break; case 19: /* HcRhDescriptorB */ break; case 20: /* HcRhStatus */ ohci_set_hub_status(ohci, val); break; /* PXA27x specific registers */ case 24: /* HcStatus */ ohci->hstatus &= ~(val & ohci->hmask); case 25: /* HcHReset */ ohci->hreset = val & ~OHCI_HRESET_FSBIR; if (val & OHCI_HRESET_FSBIR) ohci_reset(ohci); break; case 26: /* HcHInterruptEnable */ ohci->hmask = val; break; case 27: /* HcHInterruptTest */ ohci->htest = val; break; default: fprintf(stderr, "ohci_write: Bad offset %x\n", (int)addr); break; } } static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) { if (ohci->async_td && ohci->usb_packet.owner == dev) { usb_cancel_packet(&ohci->usb_packet); ohci->async_td = 0; } } static const MemoryRegionOps ohci_mem_ops = { .read = ohci_mem_read, .write = ohci_mem_write, .endianness = DEVICE_LITTLE_ENDIAN, }; static USBPortOps ohci_port_ops = { .attach = ohci_attach, .detach = ohci_detach, .child_detach = ohci_child_detach, .wakeup = ohci_wakeup, .complete = ohci_async_complete_packet, }; static USBBusOps ohci_bus_ops = { }; static int usb_ohci_init(OHCIState *ohci, DeviceState *dev, int num_ports, uint32_t localmem_base, char *masterbus, uint32_t firstport) { int i; if (usb_frame_time == 0) { #ifdef OHCI_TIME_WARP usb_frame_time = get_ticks_per_sec(); usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ/1000); #else usb_frame_time = muldiv64(1, get_ticks_per_sec(), 1000); if (get_ticks_per_sec() >= USB_HZ) { usb_bit_time = muldiv64(1, get_ticks_per_sec(), USB_HZ); } else { usb_bit_time = 1; } #endif DPRINTF("usb-ohci: usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64 "\n", usb_frame_time, usb_bit_time); } ohci->num_ports = num_ports; if (masterbus) { USBPort *ports[OHCI_MAX_PORTS]; for(i = 0; i < num_ports; i++) { ports[i] = &ohci->rhport[i].port; } if (usb_register_companion(masterbus, ports, num_ports, firstport, ohci, &ohci_port_ops, USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) { return -1; } } else { usb_bus_new(&ohci->bus, &ohci_bus_ops, dev); for (i = 0; i < num_ports; i++) { usb_register_port(&ohci->bus, &ohci->rhport[i].port, ohci, i, &ohci_port_ops, USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); } } memory_region_init_io(&ohci->mem, &ohci_mem_ops, ohci, "ohci", 256); ohci->localmem_base = localmem_base; ohci->name = dev->info->name; usb_packet_init(&ohci->usb_packet); ohci->async_td = 0; qemu_register_reset(ohci_reset, ohci); return 0; } typedef struct { PCIDevice pci_dev; OHCIState state; char *masterbus; uint32_t num_ports; uint32_t firstport; } OHCIPCIState; static int usb_ohci_initfn_pci(struct PCIDevice *dev) { OHCIPCIState *ohci = DO_UPCAST(OHCIPCIState, pci_dev, dev); ohci->pci_dev.config[PCI_CLASS_PROG] = 0x10; /* OHCI */ ohci->pci_dev.config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ if (usb_ohci_init(&ohci->state, &dev->qdev, ohci->num_ports, 0, ohci->masterbus, ohci->firstport) != 0) { return -1; } ohci->state.irq = ohci->pci_dev.irq[0]; /* TODO: avoid cast below by using dev */ pci_register_bar(&ohci->pci_dev, 0, 0, &ohci->state.mem); return 0; } void usb_ohci_init_pci(struct PCIBus *bus, int devfn) { pci_create_simple(bus, devfn, "pci-ohci"); } typedef struct { SysBusDevice busdev; OHCIState ohci; uint32_t num_ports; target_phys_addr_t dma_offset; } OHCISysBusState; static int ohci_init_pxa(SysBusDevice *dev) { OHCISysBusState *s = FROM_SYSBUS(OHCISysBusState, dev); /* Cannot fail as we pass NULL for masterbus */ usb_ohci_init(&s->ohci, &dev->qdev, s->num_ports, s->dma_offset, NULL, 0); sysbus_init_irq(dev, &s->ohci.irq); sysbus_init_mmio(dev, &s->ohci.mem); return 0; } static PCIDeviceInfo ohci_pci_info = { .qdev.name = "pci-ohci", .qdev.desc = "Apple USB Controller", .qdev.size = sizeof(OHCIPCIState), .init = usb_ohci_initfn_pci, .vendor_id = PCI_VENDOR_ID_APPLE, .device_id = PCI_DEVICE_ID_APPLE_IPID_USB, .class_id = PCI_CLASS_SERIAL_USB, .qdev.props = (Property[]) { DEFINE_PROP_STRING("masterbus", OHCIPCIState, masterbus), DEFINE_PROP_UINT32("num-ports", OHCIPCIState, num_ports, 3), DEFINE_PROP_UINT32("firstport", OHCIPCIState, firstport, 0), DEFINE_PROP_END_OF_LIST(), }, }; static SysBusDeviceInfo ohci_sysbus_info = { .init = ohci_init_pxa, .qdev.name = "sysbus-ohci", .qdev.desc = "OHCI USB Controller", .qdev.size = sizeof(OHCISysBusState), .qdev.props = (Property[]) { DEFINE_PROP_UINT32("num-ports", OHCISysBusState, num_ports, 3), DEFINE_PROP_TADDR("dma-offset", OHCISysBusState, dma_offset, 3), DEFINE_PROP_END_OF_LIST(), } }; static void ohci_register(void) { pci_qdev_register(&ohci_pci_info); sysbus_register_withprop(&ohci_sysbus_info); } device_init(ohci_register);