/* * QEMU AHCI Emulation * * Copyright (c) 2010 qiaochong@loongson.cn * Copyright (c) 2010 Roland Elek * Copyright (c) 2010 Sebastian Herbszt * Copyright (c) 2010 Alexander Graf * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, see . * */ #ifndef HW_IDE_AHCI_INTERNAL_H #define HW_IDE_AHCI_INTERNAL_H #include "hw/ide/ahci.h" #include "hw/ide/internal.h" #include "hw/sysbus.h" #include "hw/pci/pci.h" #define AHCI_MEM_BAR_SIZE 0x1000 #define AHCI_MAX_PORTS 32 #define AHCI_MAX_SG 168 /* hardware max is 64K */ #define AHCI_DMA_BOUNDARY 0xffffffff #define AHCI_USE_CLUSTERING 0 #define AHCI_MAX_CMDS 32 #define AHCI_CMD_SZ 32 #define AHCI_CMD_SLOT_SZ (AHCI_MAX_CMDS * AHCI_CMD_SZ) #define AHCI_RX_FIS_SZ 256 #define AHCI_CMD_TBL_CDB 0x40 #define AHCI_CMD_TBL_HDR_SZ 0x80 #define AHCI_CMD_TBL_SZ (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16)) #define AHCI_CMD_TBL_AR_SZ (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS) #define AHCI_PORT_PRIV_DMA_SZ (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \ AHCI_RX_FIS_SZ) #define AHCI_IRQ_ON_SG (1U << 31) #define AHCI_CMD_ATAPI (1 << 5) #define AHCI_CMD_WRITE (1 << 6) #define AHCI_CMD_PREFETCH (1 << 7) #define AHCI_CMD_RESET (1 << 8) #define AHCI_CMD_CLR_BUSY (1 << 10) #define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ #define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ #define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ /* global controller registers */ enum AHCIHostReg { AHCI_HOST_REG_CAP = 0, /* CAP: host capabilities */ AHCI_HOST_REG_CTL = 1, /* GHC: global host control */ AHCI_HOST_REG_IRQ_STAT = 2, /* IS: interrupt status */ AHCI_HOST_REG_PORTS_IMPL = 3, /* PI: bitmap of implemented ports */ AHCI_HOST_REG_VERSION = 4, /* VS: AHCI spec. version compliancy */ AHCI_HOST_REG_CCC_CTL = 5, /* CCC_CTL: CCC Control */ AHCI_HOST_REG_CCC_PORTS = 6, /* CCC_PORTS: CCC Ports */ AHCI_HOST_REG_EM_LOC = 7, /* EM_LOC: Enclosure Mgmt Location */ AHCI_HOST_REG_EM_CTL = 8, /* EM_CTL: Enclosure Mgmt Control */ AHCI_HOST_REG_CAP2 = 9, /* CAP2: host capabilities, extended */ AHCI_HOST_REG_BOHC = 10, /* BOHC: firmare/os handoff ctrl & status */ AHCI_HOST_REG__COUNT = 11 }; /* HOST_CTL bits */ #define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ #define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ #define HOST_CTL_AHCI_EN (1U << 31) /* AHCI enabled */ /* HOST_CAP bits */ #define HOST_CAP_SSC (1 << 14) /* Slumber capable */ #define HOST_CAP_AHCI (1 << 18) /* AHCI only */ #define HOST_CAP_CLO (1 << 24) /* Command List Override support */ #define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ #define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ #define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */ /* registers for each SATA port */ enum AHCIPortReg { AHCI_PORT_REG_LST_ADDR = 0, /* PxCLB: command list DMA addr */ AHCI_PORT_REG_LST_ADDR_HI = 1, /* PxCLBU: command list DMA addr hi */ AHCI_PORT_REG_FIS_ADDR = 2, /* PxFB: FIS rx buf addr */ AHCI_PORT_REG_FIS_ADDR_HI = 3, /* PxFBU: FIX rx buf addr hi */ AHCI_PORT_REG_IRQ_STAT = 4, /* PxIS: interrupt status */ AHCI_PORT_REG_IRQ_MASK = 5, /* PxIE: interrupt enable/disable mask */ AHCI_PORT_REG_CMD = 6, /* PxCMD: port command */ /* RESERVED */ AHCI_PORT_REG_TFDATA = 8, /* PxTFD: taskfile data */ AHCI_PORT_REG_SIG = 9, /* PxSIG: device TF signature */ AHCI_PORT_REG_SCR_STAT = 10, /* PxSSTS: SATA phy register: SStatus */ AHCI_PORT_REG_SCR_CTL = 11, /* PxSCTL: SATA phy register: SControl */ AHCI_PORT_REG_SCR_ERR = 12, /* PxSERR: SATA phy register: SError */ AHCI_PORT_REG_SCR_ACT = 13, /* PxSACT: SATA phy register: SActive */ AHCI_PORT_REG_CMD_ISSUE = 14, /* PxCI: command issue */ AHCI_PORT_REG_SCR_NOTIF = 15, /* PxSNTF: SATA phy register: SNotification */ AHCI_PORT_REG_FIS_CTL = 16, /* PxFBS: Port multiplier switching ctl */ AHCI_PORT_REG_DEV_SLEEP = 17, /* PxDEVSLP: device sleep control */ /* RESERVED */ AHCI_PORT_REG_VENDOR_1 = 28, /* PxVS: Vendor Specific */ AHCI_PORT_REG_VENDOR_2 = 29, AHCI_PORT_REG_VENDOR_3 = 30, AHCI_PORT_REG_VENDOR_4 = 31, AHCI_PORT_REG__COUNT = 32 }; /* Port interrupt bit descriptors */ enum AHCIPortIRQ { AHCI_PORT_IRQ_BIT_DHRS = 0, AHCI_PORT_IRQ_BIT_PSS = 1, AHCI_PORT_IRQ_BIT_DSS = 2, AHCI_PORT_IRQ_BIT_SDBS = 3, AHCI_PORT_IRQ_BIT_UFS = 4, AHCI_PORT_IRQ_BIT_DPS = 5, AHCI_PORT_IRQ_BIT_PCS = 6, AHCI_PORT_IRQ_BIT_DMPS = 7, /* RESERVED */ AHCI_PORT_IRQ_BIT_PRCS = 22, AHCI_PORT_IRQ_BIT_IPMS = 23, AHCI_PORT_IRQ_BIT_OFS = 24, /* RESERVED */ AHCI_PORT_IRQ_BIT_INFS = 26, AHCI_PORT_IRQ_BIT_IFS = 27, AHCI_PORT_IRQ_BIT_HBDS = 28, AHCI_PORT_IRQ_BIT_HBFS = 29, AHCI_PORT_IRQ_BIT_TFES = 30, AHCI_PORT_IRQ_BIT_CPDS = 31, AHCI_PORT_IRQ__COUNT = 32 }; /* PORT_IRQ_{STAT,MASK} bits */ #define PORT_IRQ_COLD_PRES (1U << 31) /* cold presence detect */ #define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ #define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ #define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ #define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ #define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ /* reserved */ #define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ #define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ #define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ /* reserved */ #define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ #define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ #define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ #define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ #define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ #define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ #define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ #define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ #define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ PORT_IRQ_UNK_FIS) #define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ PORT_IRQ_HBUS_DATA_ERR) #define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) /* PORT_CMD bits */ #define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ #define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ #define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ #define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ #define PORT_CMD_CLO (1 << 3) /* Command list override */ #define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ #define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ #define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ #define PORT_CMD_ICC_MASK (0xfU << 28) /* i/f ICC state mask */ #define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ #define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ #define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ #define PORT_CMD_RO_MASK 0x007dffe0 /* Which CMD bits are read only? */ /* ap->flags bits */ #define AHCI_FLAG_NO_NCQ (1 << 24) #define AHCI_FLAG_IGN_IRQ_IF_ERR (1 << 25) /* ignore IRQ_IF_ERR */ #define AHCI_FLAG_HONOR_PI (1 << 26) /* honor PORTS_IMPL */ #define AHCI_FLAG_IGN_SERR_INTERNAL (1 << 27) /* ignore SERR_INTERNAL */ #define AHCI_FLAG_32BIT_ONLY (1 << 28) /* force 32bit */ #define ATA_SRST (1 << 2) /* software reset */ #define STATE_RUN 0 #define STATE_RESET 1 #define SATA_SCR_SSTATUS_DET_NODEV 0x0 #define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3 #define SATA_SCR_SSTATUS_SPD_NODEV 0x00 #define SATA_SCR_SSTATUS_SPD_GEN1 0x10 #define SATA_SCR_SSTATUS_IPM_NODEV 0x000 #define SATA_SCR_SSTATUS_IPM_ACTIVE 0X100 #define AHCI_SCR_SCTL_DET 0xf #define SATA_FIS_TYPE_REGISTER_H2D 0x27 #define SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80 #define SATA_FIS_TYPE_REGISTER_D2H 0x34 #define SATA_FIS_TYPE_PIO_SETUP 0x5f #define SATA_FIS_TYPE_SDB 0xA1 #define AHCI_CMD_HDR_CMD_FIS_LEN 0x1f #define AHCI_CMD_HDR_PRDT_LEN 16 #define SATA_SIGNATURE_CDROM 0xeb140101 #define SATA_SIGNATURE_DISK 0x00000101 #define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x2c #define AHCI_PORT_REGS_START_ADDR 0x100 #define AHCI_PORT_ADDR_OFFSET_MASK 0x7f #define AHCI_PORT_ADDR_OFFSET_LEN 0x80 #define AHCI_NUM_COMMAND_SLOTS 31 #define AHCI_SUPPORTED_SPEED 20 #define AHCI_SUPPORTED_SPEED_GEN1 1 #define AHCI_VERSION_1_0 0x10000 #define AHCI_PROGMODE_MAJOR_REV_1 1 #define AHCI_COMMAND_TABLE_ACMD 0x40 #define AHCI_PRDT_SIZE_MASK 0x3fffff #define IDE_FEATURE_DMA 1 #define READ_FPDMA_QUEUED 0x60 #define WRITE_FPDMA_QUEUED 0x61 #define NCQ_NON_DATA 0x63 #define RECEIVE_FPDMA_QUEUED 0x65 #define SEND_FPDMA_QUEUED 0x64 #define NCQ_FIS_FUA_MASK 0x80 #define NCQ_FIS_RARC_MASK 0x01 #define RES_FIS_DSFIS 0x00 #define RES_FIS_PSFIS 0x20 #define RES_FIS_RFIS 0x40 #define RES_FIS_SDBFIS 0x58 #define RES_FIS_UFIS 0x60 #define SATA_CAP_SIZE 0x8 #define SATA_CAP_REV 0x2 #define SATA_CAP_BAR 0x4 typedef struct AHCIPortRegs { uint32_t lst_addr; uint32_t lst_addr_hi; uint32_t fis_addr; uint32_t fis_addr_hi; uint32_t irq_stat; uint32_t irq_mask; uint32_t cmd; uint32_t unused0; uint32_t tfdata; uint32_t sig; uint32_t scr_stat; uint32_t scr_ctl; uint32_t scr_err; uint32_t scr_act; uint32_t cmd_issue; uint32_t reserved; } AHCIPortRegs; typedef struct AHCICmdHdr { uint16_t opts; uint16_t prdtl; uint32_t status; uint64_t tbl_addr; uint32_t reserved[4]; } QEMU_PACKED AHCICmdHdr; typedef struct AHCI_SG { uint64_t addr; uint32_t reserved; uint32_t flags_size; } QEMU_PACKED AHCI_SG; typedef struct NCQTransferState { AHCIDevice *drive; BlockAIOCB *aiocb; AHCICmdHdr *cmdh; QEMUSGList sglist; BlockAcctCookie acct; uint32_t sector_count; uint64_t lba; uint8_t tag; uint8_t cmd; uint8_t slot; bool used; bool halt; } NCQTransferState; struct AHCIDevice { IDEDMA dma; IDEBus port; int port_no; uint32_t port_state; uint32_t finished; AHCIPortRegs port_regs; struct AHCIState *hba; QEMUBH *check_bh; uint8_t *lst; uint8_t *res_fis; bool done_first_drq; int32_t busy_slot; bool init_d2h_sent; AHCICmdHdr *cur_cmd; NCQTransferState ncq_tfs[AHCI_MAX_CMDS]; }; struct AHCIPCIState { /*< private >*/ PCIDevice parent_obj; /*< public >*/ AHCIState ahci; }; #define ICH_AHCI(obj) \ OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI) extern const VMStateDescription vmstate_ahci; #define VMSTATE_AHCI(_field, _state) { \ .name = (stringify(_field)), \ .size = sizeof(AHCIState), \ .vmsd = &vmstate_ahci, \ .flags = VMS_STRUCT, \ .offset = vmstate_offset_value(_state, _field, AHCIState), \ } /** * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2), * but some fields have been re-mapped and re-purposed, as seen in * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED") * * cmd_fis[3], feature 7:0, becomes sector count 7:0. * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit. * cmd_fis[11], feature 15:8, becomes sector count 15:8. * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0) * cmd_fis[13], count 15:8, becomes the priority value (7:6) * bytes 16-19 become an le32 "auxiliary" field. */ typedef struct NCQFrame { uint8_t fis_type; uint8_t c; uint8_t command; uint8_t sector_count_low; /* (feature 7:0) */ uint8_t lba0; uint8_t lba1; uint8_t lba2; uint8_t fua; /* (device 7:0) */ uint8_t lba3; uint8_t lba4; uint8_t lba5; uint8_t sector_count_high; /* (feature 15:8) */ uint8_t tag; /* (count 0:7) */ uint8_t prio; /* (count 15:8) */ uint8_t icc; uint8_t control; uint8_t aux0; uint8_t aux1; uint8_t aux2; uint8_t aux3; } QEMU_PACKED NCQFrame; typedef struct SDBFIS { uint8_t type; uint8_t flags; uint8_t status; uint8_t error; uint32_t payload; } QEMU_PACKED SDBFIS; void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports); void ahci_init(AHCIState *s, DeviceState *qdev); void ahci_uninit(AHCIState *s); void ahci_reset(AHCIState *s); #define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI) #endif /* HW_IDE_AHCI_INTERNAL_H */