From 3348e7e34ff945340dbcf310d29d4feb5de20ef6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 23 Jan 2020 09:17:07 +0100 Subject: docs: vhost-user: add in-band kick/call messages For good reason, vhost-user is currently built asynchronously, that way better performance can be obtained. However, for certain use cases such as simulation, this is problematic. Consider an event-based simulation in which both the device and CPU have scheduled according to a simulation "calendar". Now, consider the CPU sending I/O to the device, over a vring in the vhost-user protocol. In this case, the CPU must wait for the vring interrupt to have been processed by the device, so that the device is able to put an entry onto the simulation calendar to obtain time to handle the interrupt. Note that this doesn't mean the I/O is actually done at this time, it just means that the handling of it is scheduled before the CPU can continue running. This cannot be done with the asynchronous eventfd based vring kick and call design. Extend the protocol slightly, so that a message can be used for kick and call instead, if VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS is negotiated. This in itself doesn't guarantee synchronisation, but both sides can also negotiate VHOST_USER_PROTOCOL_F_REPLY_ACK and thus get a reply to this message by setting the need_reply flag, and ensure synchronisation this way. To really use it in both directions, VHOST_USER_PROTOCOL_F_SLAVE_REQ is also needed. Since it is used for simulation purposes and too many messages on the socket can lock up the virtual machine, document that this should only be used together with the mentioned features. Signed-off-by: Johannes Berg Message-Id: <20200123081708.7817-6-johannes@sipsolutions.net> Reviewed-by: Michael S. Tsirkin Signed-off-by: Michael S. Tsirkin --- docs/interop/vhost-user.rst | 122 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 104 insertions(+), 18 deletions(-) (limited to 'docs') diff --git a/docs/interop/vhost-user.rst b/docs/interop/vhost-user.rst index 5f8b3a456b..401652397c 100644 --- a/docs/interop/vhost-user.rst +++ b/docs/interop/vhost-user.rst @@ -2,6 +2,7 @@ Vhost-user Protocol =================== :Copyright: 2014 Virtual Open Systems Sarl. +:Copyright: 2019 Intel Corporation :Licence: This work is licensed under the terms of the GNU GPL, version 2 or later. See the COPYING file in the top-level directory. @@ -279,6 +280,9 @@ If *master* is unable to send the full message or receives a wrong reply it will close the connection. An optional reconnection mechanism can be implemented. +If *slave* detects some error such as incompatible features, it may also +close the connection. This should only happen in exceptional circumstances. + Any protocol extensions are gated by protocol feature bits, which allows full backwards compatibility on both master and slave. As older slaves don't support negotiating protocol features, a feature @@ -315,7 +319,8 @@ it until ring is started, or after it has been stopped. Client must start ring upon receiving a kick (that is, detecting that file descriptor is readable) on the descriptor specified by -``VHOST_USER_SET_VRING_KICK``, and stop ring upon receiving +``VHOST_USER_SET_VRING_KICK`` or receiving the in-band message +``VHOST_USER_VRING_KICK`` if negotiated, and stop ring upon receiving ``VHOST_USER_GET_VRING_BASE``. While processing the rings (whether they are enabled or not), client @@ -767,25 +772,49 @@ When reconnecting: #. Resubmit inflight ``DescStatePacked`` entries in order of their counter value +In-band notifications +--------------------- + +In some limited situations (e.g. for simulation) it is desirable to +have the kick, call and error (if used) signals done via in-band +messages instead of asynchronous eventfd notifications. This can be +done by negotiating the ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` +protocol feature. + +Note that due to the fact that too many messages on the sockets can +cause the sending application(s) to block, it is not advised to use +this feature unless absolutely necessary. It is also considered an +error to negotiate this feature without also negotiating +``VHOST_USER_PROTOCOL_F_SLAVE_REQ`` and ``VHOST_USER_PROTOCOL_F_REPLY_ACK``, +the former is necessary for getting a message channel from the slave +to the master, while the latter needs to be used with the in-band +notification messages to block until they are processed, both to avoid +blocking later and for proper processing (at least in the simulation +use case.) As it has no other way of signalling this error, the slave +should close the connection as a response to a +``VHOST_USER_SET_PROTOCOL_FEATURES`` message that sets the in-band +notifications feature flag without the other two. + Protocol features ----------------- .. code:: c - #define VHOST_USER_PROTOCOL_F_MQ 0 - #define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1 - #define VHOST_USER_PROTOCOL_F_RARP 2 - #define VHOST_USER_PROTOCOL_F_REPLY_ACK 3 - #define VHOST_USER_PROTOCOL_F_MTU 4 - #define VHOST_USER_PROTOCOL_F_SLAVE_REQ 5 - #define VHOST_USER_PROTOCOL_F_CROSS_ENDIAN 6 - #define VHOST_USER_PROTOCOL_F_CRYPTO_SESSION 7 - #define VHOST_USER_PROTOCOL_F_PAGEFAULT 8 - #define VHOST_USER_PROTOCOL_F_CONFIG 9 - #define VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD 10 - #define VHOST_USER_PROTOCOL_F_HOST_NOTIFIER 11 - #define VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD 12 - #define VHOST_USER_PROTOCOL_F_RESET_DEVICE 13 + #define VHOST_USER_PROTOCOL_F_MQ 0 + #define VHOST_USER_PROTOCOL_F_LOG_SHMFD 1 + #define VHOST_USER_PROTOCOL_F_RARP 2 + #define VHOST_USER_PROTOCOL_F_REPLY_ACK 3 + #define VHOST_USER_PROTOCOL_F_MTU 4 + #define VHOST_USER_PROTOCOL_F_SLAVE_REQ 5 + #define VHOST_USER_PROTOCOL_F_CROSS_ENDIAN 6 + #define VHOST_USER_PROTOCOL_F_CRYPTO_SESSION 7 + #define VHOST_USER_PROTOCOL_F_PAGEFAULT 8 + #define VHOST_USER_PROTOCOL_F_CONFIG 9 + #define VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD 10 + #define VHOST_USER_PROTOCOL_F_HOST_NOTIFIER 11 + #define VHOST_USER_PROTOCOL_F_INFLIGHT_SHMFD 12 + #define VHOST_USER_PROTOCOL_F_RESET_DEVICE 13 + #define VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS 14 Master message types -------------------- @@ -947,7 +976,12 @@ Master message types Bits (0-7) of the payload contain the vring index. Bit 8 is the invalid FD flag. This flag is set when there is no file descriptor in the ancillary data. This signals that polling should be used - instead of waiting for a kick. + instead of waiting for the kick. Note that if the protocol feature + ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` has been negotiated + this message isn't necessary as the ring is also started on the + ``VHOST_USER_VRING_KICK`` message, it may however still be used to + set an event file descriptor (which will be preferred over the + message) or to enable polling. ``VHOST_USER_SET_VRING_CALL`` :id: 13 @@ -960,7 +994,12 @@ Master message types Bits (0-7) of the payload contain the vring index. Bit 8 is the invalid FD flag. This flag is set when there is no file descriptor in the ancillary data. This signals that polling will be used - instead of waiting for the call. + instead of waiting for the call. Note that if the protocol features + ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` and + ``VHOST_USER_PROTOCOL_F_SLAVE_REQ`` have been negotiated this message + isn't necessary as the ``VHOST_USER_SLAVE_VRING_CALL`` message can be + used, it may however still be used to set an event file descriptor + or to enable polling. ``VHOST_USER_SET_VRING_ERR`` :id: 14 @@ -972,7 +1011,12 @@ Master message types Bits (0-7) of the payload contain the vring index. Bit 8 is the invalid FD flag. This flag is set when there is no file descriptor - in the ancillary data. + in the ancillary data. Note that if the protocol features + ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` and + ``VHOST_USER_PROTOCOL_F_SLAVE_REQ`` have been negotiated this message + isn't necessary as the ``VHOST_USER_SLAVE_VRING_ERR`` message can be + used, it may however still be used to set an event file descriptor + (which will be preferred over the message). ``VHOST_USER_GET_QUEUE_NUM`` :id: 17 @@ -1205,6 +1249,20 @@ Master message types Only valid if the ``VHOST_USER_PROTOCOL_F_RESET_DEVICE`` protocol feature is set by the backend. +``VHOST_USER_VRING_KICK`` + :id: 35 + :equivalent ioctl: N/A + :slave payload: vring state description + :master payload: N/A + + When the ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` protocol + feature has been successfully negotiated, this message may be + submitted by the master to indicate that a buffer was added to + the vring instead of signalling it using the vring's kick file + descriptor or having the slave rely on polling. + + The state.num field is currently reserved and must be set to 0. + Slave message types ------------------- @@ -1261,6 +1319,34 @@ Slave message types ``VHOST_USER_PROTOCOL_F_HOST_NOTIFIER`` protocol feature has been successfully negotiated. +``VHOST_USER_SLAVE_VRING_CALL`` + :id: 4 + :equivalent ioctl: N/A + :slave payload: vring state description + :master payload: N/A + + When the ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` protocol + feature has been successfully negotiated, this message may be + submitted by the slave to indicate that a buffer was used from + the vring instead of signalling this using the vring's call file + descriptor or having the master relying on polling. + + The state.num field is currently reserved and must be set to 0. + +``VHOST_USER_SLAVE_VRING_ERR`` + :id: 5 + :equivalent ioctl: N/A + :slave payload: vring state description + :master payload: N/A + + When the ``VHOST_USER_PROTOCOL_F_INBAND_NOTIFICATIONS`` protocol + feature has been successfully negotiated, this message may be + submitted by the slave to indicate that an error occurred on the + specific vring, instead of signalling the error file descriptor + set by the master via ``VHOST_USER_SET_VRING_ERR``. + + The state.num field is currently reserved and must be set to 0. + .. _reply_ack: VHOST_USER_PROTOCOL_F_REPLY_ACK -- cgit v1.2.3 From fd9b0830b0be0ea89cf30ad846a232e0c442a18a Mon Sep 17 00:00:00 2001 From: Igor Mammedov Date: Wed, 29 Jan 2020 15:06:21 +0100 Subject: acpi: cpuhp: document CPHP_GET_CPU_ID_CMD command Commit 3a61c8db9d25 introduced CPHP_GET_CPU_ID_CMD command but did not sufficiently describe it. Fix it by adding missing command documentation. Fixes: 3a61c8db9d25 ("acpi: cpuhp: add CPHP_GET_CPU_ID_CMD command") Signed-off-by: Igor Mammedov Reviewed-by: Laszlo Ersek Message-Id: <1580306781-228371-1-git-send-email-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin Signed-off-by: Michael S. Tsirkin --- docs/specs/acpi_cpu_hotplug.txt | 2 ++ 1 file changed, 2 insertions(+) (limited to 'docs') diff --git a/docs/specs/acpi_cpu_hotplug.txt b/docs/specs/acpi_cpu_hotplug.txt index a8ce5e7402..9bb22d1270 100644 --- a/docs/specs/acpi_cpu_hotplug.txt +++ b/docs/specs/acpi_cpu_hotplug.txt @@ -94,6 +94,8 @@ write access: register in QEMU 2: following writes to 'Command data' register set OST status register in QEMU + 3: following reads from 'Command data' and 'Command data 2' return + architecture specific CPU ID value for currently selected CPU. other values: reserved [0x6-0x7] reserved [0x8] Command data: (DWORD access) -- cgit v1.2.3