From 3f1beaca88bffa4828cc86beb89ff70474516d91 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:28 +0100 Subject: target-arm: Implement 'int' loglevel The 'int' loglevel for recording interrupts and exceptions requires support in the target-specific code. Implement it for ARM. This improves debug logging in some situations that were otherwise pretty opaque, such as when we fault trying to execute at an exception vector address, which would otherwise cause an infinite loop of taking exceptions without any indication in the debug log of what was going on. Signed-off-by: Peter Maydell Reviewed-by: Richard Henderson Message-id: 1375700771-21665-1-git-send-email-peter.maydell@linaro.org --- target-arm/helper.c | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/target-arm/helper.c b/target-arm/helper.c index 4968391b83..6d9026d04c 100644 --- a/target-arm/helper.c +++ b/target-arm/helper.c @@ -1974,6 +1974,37 @@ static void do_v7m_exception_exit(CPUARMState *env) pointer. */ } +/* Exception names for debug logging; note that not all of these + * precisely correspond to architectural exceptions. + */ +static const char * const excnames[] = { + [EXCP_UDEF] = "Undefined Instruction", + [EXCP_SWI] = "SVC", + [EXCP_PREFETCH_ABORT] = "Prefetch Abort", + [EXCP_DATA_ABORT] = "Data Abort", + [EXCP_IRQ] = "IRQ", + [EXCP_FIQ] = "FIQ", + [EXCP_BKPT] = "Breakpoint", + [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", + [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", + [EXCP_STREX] = "QEMU intercept of STREX", +}; + +static inline void arm_log_exception(int idx) +{ + if (qemu_loglevel_mask(CPU_LOG_INT)) { + const char *exc = NULL; + + if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { + exc = excnames[idx]; + } + if (!exc) { + exc = "unknown"; + } + qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s]\n", idx, exc); + } +} + void arm_v7m_cpu_do_interrupt(CPUState *cs) { ARMCPU *cpu = ARM_CPU(cs); @@ -1982,6 +2013,8 @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) uint32_t lr; uint32_t addr; + arm_log_exception(env->exception_index); + lr = 0xfffffff1; if (env->v7m.current_sp) lr |= 4; @@ -2011,6 +2044,7 @@ void arm_v7m_cpu_do_interrupt(CPUState *cs) if (nr == 0xab) { env->regs[15] += 2; env->regs[0] = do_arm_semihosting(env); + qemu_log_mask(CPU_LOG_INT, "...handled as semihosting call\n"); return; } } @@ -2064,6 +2098,8 @@ void arm_cpu_do_interrupt(CPUState *cs) assert(!IS_M(env)); + arm_log_exception(env->exception_index); + /* TODO: Vectored interrupt controller. */ switch (env->exception_index) { case EXCP_UDEF: @@ -2091,6 +2127,7 @@ void arm_cpu_do_interrupt(CPUState *cs) || (mask == 0xab && env->thumb)) && (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR) { env->regs[0] = do_arm_semihosting(env); + qemu_log_mask(CPU_LOG_INT, "...handled as semihosting call\n"); return; } } @@ -2108,18 +2145,23 @@ void arm_cpu_do_interrupt(CPUState *cs) && (env->uncached_cpsr & CPSR_M) != ARM_CPU_MODE_USR) { env->regs[15] += 2; env->regs[0] = do_arm_semihosting(env); + qemu_log_mask(CPU_LOG_INT, "...handled as semihosting call\n"); return; } } env->cp15.c5_insn = 2; /* Fall through to prefetch abort. */ case EXCP_PREFETCH_ABORT: + qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n", + env->cp15.c5_insn, env->cp15.c6_insn); new_mode = ARM_CPU_MODE_ABT; addr = 0x0c; mask = CPSR_A | CPSR_I; offset = 4; break; case EXCP_DATA_ABORT: + qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n", + env->cp15.c5_data, env->cp15.c6_data); new_mode = ARM_CPU_MODE_ABT; addr = 0x10; mask = CPSR_A | CPSR_I; -- cgit v1.2.3 From 7c1840b686e34ed138414ff0fe395a63f031387e Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:28 +0100 Subject: target-arm: Make IRQ and FIQ gpio lines on the CPU object Now that ARMCPU is a subclass of DeviceState, we can make the CPU's inbound IRQ and FIQ lines be simply gpio lines, which means we can remove the odd arm_pic shim. We retain the arm_pic_init_cpu() function as a backwards compatibility shim layer so we can convert the board models to get the IRQ and FIQ lines directly from the ARMCPU object one at a time. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-2-git-send-email-peter.maydell@linaro.org --- hw/arm/pic_cpu.c | 63 +++++++++----------------------------------------------- target-arm/cpu.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++++++ target-arm/cpu.h | 3 +++ 3 files changed, 73 insertions(+), 53 deletions(-) diff --git a/hw/arm/pic_cpu.c b/hw/arm/pic_cpu.c index 875280aa97..9c362735c0 100644 --- a/hw/arm/pic_cpu.c +++ b/hw/arm/pic_cpu.c @@ -9,60 +9,17 @@ #include "hw/hw.h" #include "hw/arm/arm.h" -#include "sysemu/kvm.h" - -/* Input 0 is IRQ and input 1 is FIQ. */ -static void arm_pic_cpu_handler(void *opaque, int irq, int level) -{ - ARMCPU *cpu = opaque; - CPUState *cs = CPU(cpu); - - switch (irq) { - case ARM_PIC_CPU_IRQ: - if (level) { - cpu_interrupt(cs, CPU_INTERRUPT_HARD); - } else { - cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); - } - break; - case ARM_PIC_CPU_FIQ: - if (level) { - cpu_interrupt(cs, CPU_INTERRUPT_FIQ); - } else { - cpu_reset_interrupt(cs, CPU_INTERRUPT_FIQ); - } - break; - default: - hw_error("arm_pic_cpu_handler: Bad interrupt line %d\n", irq); - } -} - -static void kvm_arm_pic_cpu_handler(void *opaque, int irq, int level) -{ -#ifdef CONFIG_KVM - ARMCPU *cpu = opaque; - CPUState *cs = CPU(cpu); - int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT; - - switch (irq) { - case ARM_PIC_CPU_IRQ: - kvm_irq |= KVM_ARM_IRQ_CPU_IRQ; - break; - case ARM_PIC_CPU_FIQ: - kvm_irq |= KVM_ARM_IRQ_CPU_FIQ; - break; - default: - hw_error("kvm_arm_pic_cpu_handler: Bad interrupt line %d\n", irq); - } - kvm_irq |= cs->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT; - kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0); -#endif -} +/* Backwards compatibility shim; this can disappear when all + * board models have been updated to get IRQ and FIQ lines directly + * from the ARMCPU object rather than by calling this function. + */ qemu_irq *arm_pic_init_cpu(ARMCPU *cpu) { - if (kvm_enabled()) { - return qemu_allocate_irqs(kvm_arm_pic_cpu_handler, cpu, 2); - } - return qemu_allocate_irqs(arm_pic_cpu_handler, cpu, 2); + DeviceState *dev = DEVICE(cpu); + qemu_irq *irqs = g_new(qemu_irq, 2); + + irqs[0] = qdev_get_gpio_in(dev, ARM_CPU_IRQ); + irqs[1] = qdev_get_gpio_in(dev, ARM_CPU_FIQ); + return irqs; } diff --git a/target-arm/cpu.c b/target-arm/cpu.c index 5a7566b8fc..6f56aa86db 100644 --- a/target-arm/cpu.c +++ b/target-arm/cpu.c @@ -23,7 +23,9 @@ #if !defined(CONFIG_USER_ONLY) #include "hw/loader.h" #endif +#include "hw/arm/arm.h" #include "sysemu/sysemu.h" +#include "sysemu/kvm.h" static void arm_cpu_set_pc(CPUState *cs, vaddr value) { @@ -129,6 +131,55 @@ static void arm_cpu_reset(CPUState *s) tb_flush(env); } +#ifndef CONFIG_USER_ONLY +static void arm_cpu_set_irq(void *opaque, int irq, int level) +{ + ARMCPU *cpu = opaque; + CPUState *cs = CPU(cpu); + + switch (irq) { + case ARM_CPU_IRQ: + if (level) { + cpu_interrupt(cs, CPU_INTERRUPT_HARD); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD); + } + break; + case ARM_CPU_FIQ: + if (level) { + cpu_interrupt(cs, CPU_INTERRUPT_FIQ); + } else { + cpu_reset_interrupt(cs, CPU_INTERRUPT_FIQ); + } + break; + default: + hw_error("arm_cpu_set_irq: Bad interrupt line %d\n", irq); + } +} + +static void arm_cpu_kvm_set_irq(void *opaque, int irq, int level) +{ +#ifdef CONFIG_KVM + ARMCPU *cpu = opaque; + CPUState *cs = CPU(cpu); + int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT; + + switch (irq) { + case ARM_CPU_IRQ: + kvm_irq |= KVM_ARM_IRQ_CPU_IRQ; + break; + case ARM_CPU_FIQ: + kvm_irq |= KVM_ARM_IRQ_CPU_FIQ; + break; + default: + hw_error("arm_cpu_kvm_set_irq: Bad interrupt line %d\n", irq); + } + kvm_irq |= cs->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT; + kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0); +#endif +} +#endif + static inline void set_feature(CPUARMState *env, int feature) { env->features |= 1ULL << feature; @@ -145,6 +196,15 @@ static void arm_cpu_initfn(Object *obj) cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal, g_free, g_free); +#ifndef CONFIG_USER_ONLY + /* Our inbound IRQ and FIQ lines */ + if (kvm_enabled()) { + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 2); + } else { + qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 2); + } +#endif + if (tcg_enabled() && !inited) { inited = true; arm_translate_init(); diff --git a/target-arm/cpu.h b/target-arm/cpu.h index b2dc49413c..dffeec7455 100644 --- a/target-arm/cpu.h +++ b/target-arm/cpu.h @@ -58,6 +58,9 @@ /* ARM-specific interrupt pending bits. */ #define CPU_INTERRUPT_FIQ CPU_INTERRUPT_TGT_EXT_1 +/* Meanings of the ARMCPU object's two inbound GPIO lines */ +#define ARM_CPU_IRQ 0 +#define ARM_CPU_FIQ 1 typedef void ARMWriteCPFunc(void *opaque, int cp_info, int srcreg, int operand, uint32_t value); -- cgit v1.2.3 From de3a658f5b1d4ea290cb4369c55e83fdead81933 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:28 +0100 Subject: hw/arm/armv7m: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-3-git-send-email-peter.maydell@linaro.org --- hw/arm/armv7m.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c index 82d36fb696..89a9015de7 100644 --- a/hw/arm/armv7m.c +++ b/hw/arm/armv7m.c @@ -173,7 +173,6 @@ qemu_irq *armv7m_init(MemoryRegion *address_space_mem, DeviceState *nvic; /* FIXME: make this local state. */ static qemu_irq pic[64]; - qemu_irq *cpu_pic; int image_size; uint64_t entry; uint64_t lowaddr; @@ -221,8 +220,8 @@ qemu_irq *armv7m_init(MemoryRegion *address_space_mem, nvic = qdev_create(NULL, "armv7m_nvic"); env->nvic = nvic; qdev_init_nofail(nvic); - cpu_pic = arm_pic_init_cpu(cpu); - sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, cpu_pic[ARM_PIC_CPU_IRQ]); + sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); for (i = 0; i < 64; i++) { pic[i] = qdev_get_gpio_in(nvic, i); } -- cgit v1.2.3 From ad666d91f43574fb200c738bc793023ae23d24a5 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:28 +0100 Subject: hw/arm/exynos4210: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-4-git-send-email-peter.maydell@linaro.org --- hw/arm/exynos4210.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/hw/arm/exynos4210.c b/hw/arm/exynos4210.c index 216b9b77d9..4ebb9381b0 100644 --- a/hw/arm/exynos4210.c +++ b/hw/arm/exynos4210.c @@ -137,10 +137,8 @@ void exynos4210_write_secondary(ARMCPU *cpu, Exynos4210State *exynos4210_init(MemoryRegion *system_mem, unsigned long ram_size) { - qemu_irq cpu_irq[EXYNOS4210_NCPUS]; int i, n; Exynos4210State *s = g_new(Exynos4210State, 1); - qemu_irq *irqp; qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS]; unsigned long mem_size; DeviceState *dev; @@ -152,15 +150,6 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem, fprintf(stderr, "Unable to find CPU %d definition\n", n); exit(1); } - - /* Create PIC controller for each processor instance */ - irqp = arm_pic_init_cpu(s->cpu[n]); - - /* - * Get GICs gpio_in cpu_irq to connect a combiner to them later. - * Use only IRQ for a while. - */ - cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ]; } /*** IRQs ***/ @@ -178,8 +167,9 @@ Exynos4210State *exynos4210_init(MemoryRegion *system_mem, } busdev = SYS_BUS_DEVICE(dev); - /* Connect IRQ Gate output to cpu_irq */ - sysbus_connect_irq(busdev, 0, cpu_irq[i]); + /* Connect IRQ Gate output to CPU's IRQ line */ + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ)); } /* Private memory region and Internal GIC */ -- cgit v1.2.3 From 9188dbf71accf9d97f2e434380ea210ba75705ca Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:29 +0100 Subject: hw/arm/highbank: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-5-git-send-email-peter.maydell@linaro.org --- hw/arm/highbank.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c index 35d5511d28..f733a6cba7 100644 --- a/hw/arm/highbank.c +++ b/hw/arm/highbank.c @@ -209,7 +209,6 @@ static void calxeda_init(QEMUMachineInitArgs *args, enum cxmachines machine) const char *initrd_filename = args->initrd_filename; DeviceState *dev = NULL; SysBusDevice *busdev; - qemu_irq *irqp; qemu_irq pic[128]; int n; qemu_irq cpu_irq[4]; @@ -239,8 +238,7 @@ static void calxeda_init(QEMUMachineInitArgs *args, enum cxmachines machine) /* This will become a QOM property eventually */ cpu->reset_cbar = GIC_BASE_ADDR; - irqp = arm_pic_init_cpu(cpu); - cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ]; + cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); } sysmem = get_system_memory(); -- cgit v1.2.3 From 99d228d6e9b08488d62029c438f8381b8c72d109 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:29 +0100 Subject: hw/arm/integratorcp: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-6-git-send-email-peter.maydell@linaro.org --- hw/arm/integratorcp.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/hw/arm/integratorcp.c b/hw/arm/integratorcp.c index d518188d0a..59c37262c3 100644 --- a/hw/arm/integratorcp.c +++ b/hw/arm/integratorcp.c @@ -465,7 +465,6 @@ static void integratorcp_init(QEMUMachineInitArgs *args) MemoryRegion *ram = g_new(MemoryRegion, 1); MemoryRegion *ram_alias = g_new(MemoryRegion, 1); qemu_irq pic[32]; - qemu_irq *cpu_pic; DeviceState *dev; int i; @@ -493,10 +492,10 @@ static void integratorcp_init(QEMUMachineInitArgs *args) qdev_init_nofail(dev); sysbus_mmio_map((SysBusDevice *)dev, 0, 0x10000000); - cpu_pic = arm_pic_init_cpu(cpu); dev = sysbus_create_varargs(TYPE_INTEGRATOR_PIC, 0x14000000, - cpu_pic[ARM_PIC_CPU_IRQ], - cpu_pic[ARM_PIC_CPU_FIQ], NULL); + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ), + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ), + NULL); for (i = 0; i < 32; i++) { pic[i] = qdev_get_gpio_in(dev, i); } -- cgit v1.2.3 From 2f69ba1736e9460aa04c46790c1d34edfbee563a Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:29 +0100 Subject: hw/arm/kzm: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-7-git-send-email-peter.maydell@linaro.org --- hw/arm/kzm.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/hw/arm/kzm.c b/hw/arm/kzm.c index bd6c05ce1b..a248bf0dc7 100644 --- a/hw/arm/kzm.c +++ b/hw/arm/kzm.c @@ -82,7 +82,6 @@ static void kzm_init(QEMUMachineInitArgs *args) MemoryRegion *ram = g_new(MemoryRegion, 1); MemoryRegion *sram = g_new(MemoryRegion, 1); MemoryRegion *ram_alias = g_new(MemoryRegion, 1); - qemu_irq *cpu_pic; DeviceState *dev; DeviceState *ccm; @@ -108,11 +107,10 @@ static void kzm_init(QEMUMachineInitArgs *args) memory_region_init_ram(sram, NULL, "kzm.sram", 0x4000); memory_region_add_subregion(address_space_mem, 0x1FFFC000, sram); - cpu_pic = arm_pic_init_cpu(cpu); dev = sysbus_create_varargs("imx_avic", 0x68000000, - cpu_pic[ARM_PIC_CPU_IRQ], - cpu_pic[ARM_PIC_CPU_FIQ], NULL); - + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ), + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ), + NULL); imx_serial_create(0, 0x43f90000, qdev_get_gpio_in(dev, 45)); imx_serial_create(1, 0x43f94000, qdev_get_gpio_in(dev, 32)); -- cgit v1.2.3 From fcef61ec6bfaf96eeee0fb3024dd7ec8437ffa65 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:29 +0100 Subject: hw/arm/musicpal: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-8-git-send-email-peter.maydell@linaro.org --- hw/arm/musicpal.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/arm/musicpal.c b/hw/arm/musicpal.c index d715143d30..4404b8dd03 100644 --- a/hw/arm/musicpal.c +++ b/hw/arm/musicpal.c @@ -1586,7 +1586,6 @@ static void musicpal_init(QEMUMachineInitArgs *args) const char *kernel_cmdline = args->kernel_cmdline; const char *initrd_filename = args->initrd_filename; ARMCPU *cpu; - qemu_irq *cpu_pic; qemu_irq pic[32]; DeviceState *dev; DeviceState *i2c_dev; @@ -1610,7 +1609,6 @@ static void musicpal_init(QEMUMachineInitArgs *args) fprintf(stderr, "Unable to find CPU definition\n"); exit(1); } - cpu_pic = arm_pic_init_cpu(cpu); /* For now we use a fixed - the original - RAM size */ memory_region_init_ram(ram, NULL, "musicpal.ram", MP_RAM_DEFAULT_SIZE); @@ -1622,7 +1620,7 @@ static void musicpal_init(QEMUMachineInitArgs *args) memory_region_add_subregion(address_space_mem, MP_SRAM_BASE, sram); dev = sysbus_create_simple(TYPE_MV88W8618_PIC, MP_PIC_BASE, - cpu_pic[ARM_PIC_CPU_IRQ]); + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); for (i = 0; i < 32; i++) { pic[i] = qdev_get_gpio_in(dev, i); } -- cgit v1.2.3 From 437f0f10a42dc2a0236a79e0bba39a32af4d73f8 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:29 +0100 Subject: hw/arm/omap*: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-9-git-send-email-peter.maydell@linaro.org --- hw/arm/omap1.c | 8 ++++---- hw/arm/omap2.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index 19be5fcd01..b6a0b27b02 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -3827,7 +3827,6 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, int i; struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) g_malloc0(sizeof(struct omap_mpu_state_s)); - qemu_irq *cpu_irq; qemu_irq dma_irqs[6]; DriveInfo *dinfo; SysBusDevice *busdev; @@ -3860,14 +3859,15 @@ struct omap_mpu_state_s *omap310_mpu_init(MemoryRegion *system_memory, omap_clkm_init(system_memory, 0xfffece00, 0xe1008000, s); - cpu_irq = arm_pic_init_cpu(s->cpu); s->ih[0] = qdev_create(NULL, "omap-intc"); qdev_prop_set_uint32(s->ih[0], "size", 0x100); qdev_prop_set_ptr(s->ih[0], "clk", omap_findclk(s, "arminth_ck")); qdev_init_nofail(s->ih[0]); busdev = SYS_BUS_DEVICE(s->ih[0]); - sysbus_connect_irq(busdev, 0, cpu_irq[ARM_PIC_CPU_IRQ]); - sysbus_connect_irq(busdev, 1, cpu_irq[ARM_PIC_CPU_FIQ]); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ)); sysbus_mmio_map(busdev, 0, 0xfffecb00); s->ih[1] = qdev_create(NULL, "omap-intc"); qdev_prop_set_uint32(s->ih[1], "size", 0x800); diff --git a/hw/arm/omap2.c b/hw/arm/omap2.c index ec9610b7d5..36efde0d64 100644 --- a/hw/arm/omap2.c +++ b/hw/arm/omap2.c @@ -2244,7 +2244,6 @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, { struct omap_mpu_state_s *s = (struct omap_mpu_state_s *) g_malloc0(sizeof(struct omap_mpu_state_s)); - qemu_irq *cpu_irq; qemu_irq dma_irqs[4]; DriveInfo *dinfo; int i; @@ -2277,15 +2276,16 @@ struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, s->l4 = omap_l4_init(sysmem, OMAP2_L4_BASE, 54); /* Actually mapped at any 2K boundary in the ARM11 private-peripheral if */ - cpu_irq = arm_pic_init_cpu(s->cpu); s->ih[0] = qdev_create(NULL, "omap2-intc"); qdev_prop_set_uint8(s->ih[0], "revision", 0x21); qdev_prop_set_ptr(s->ih[0], "fclk", omap_findclk(s, "mpu_intc_fclk")); qdev_prop_set_ptr(s->ih[0], "iclk", omap_findclk(s, "mpu_intc_iclk")); qdev_init_nofail(s->ih[0]); busdev = SYS_BUS_DEVICE(s->ih[0]); - sysbus_connect_irq(busdev, 0, cpu_irq[ARM_PIC_CPU_IRQ]); - sysbus_connect_irq(busdev, 1, cpu_irq[ARM_PIC_CPU_FIQ]); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); + sysbus_connect_irq(busdev, 1, + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ)); sysbus_mmio_map(busdev, 0, 0x480fe000); s->prcm = omap_prcm_init(omap_l4tao(s->l4, 3), qdev_get_gpio_in(s->ih[0], -- cgit v1.2.3 From 033ee5a5ac5dd01bcea76a6427d95f5390af43ca Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:30 +0100 Subject: hw/arm/realview: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-10-git-send-email-peter.maydell@linaro.org --- hw/arm/realview.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/hw/arm/realview.c b/hw/arm/realview.c index 3060f48f77..82ec02d118 100644 --- a/hw/arm/realview.c +++ b/hw/arm/realview.c @@ -56,7 +56,6 @@ static void realview_init(QEMUMachineInitArgs *args, MemoryRegion *ram_hack = g_new(MemoryRegion, 1); DeviceState *dev, *sysctl, *gpio2, *pl041; SysBusDevice *busdev; - qemu_irq *irqp; qemu_irq pic[64]; qemu_irq mmc_irq[2]; PCIBus *pci_bus = NULL; @@ -92,8 +91,7 @@ static void realview_init(QEMUMachineInitArgs *args, fprintf(stderr, "Unable to find CPU definition\n"); exit(1); } - irqp = arm_pic_init_cpu(cpu); - cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ]; + cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); } env = &cpu->env; if (arm_feature(env, ARM_FEATURE_V7)) { -- cgit v1.2.3 From 4f071cf9b53a236469500f08033335cc726db9b0 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:30 +0100 Subject: hw/arm/strongarm: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-11-git-send-email-peter.maydell@linaro.org --- hw/arm/strongarm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/hw/arm/strongarm.c b/hw/arm/strongarm.c index 82a9492fdd..7b8ef8cbeb 100644 --- a/hw/arm/strongarm.c +++ b/hw/arm/strongarm.c @@ -1588,7 +1588,6 @@ StrongARMState *sa1110_init(MemoryRegion *sysmem, unsigned int sdram_size, const char *rev) { StrongARMState *s; - qemu_irq *pic; int i; s = g_malloc0(sizeof(StrongARMState)); @@ -1613,9 +1612,10 @@ StrongARMState *sa1110_init(MemoryRegion *sysmem, vmstate_register_ram_global(&s->sdram); memory_region_add_subregion(sysmem, SA_SDCS0, &s->sdram); - pic = arm_pic_init_cpu(s->cpu); s->pic = sysbus_create_varargs("strongarm_pic", 0x90050000, - pic[ARM_PIC_CPU_IRQ], pic[ARM_PIC_CPU_FIQ], NULL); + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ), + qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ), + NULL); sysbus_create_varargs("pxa25x-timer", 0x90000000, qdev_get_gpio_in(s->pic, SA_PIC_OSTC0), -- cgit v1.2.3 From bace999f8a03c226eecad3c170def644f0551c50 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:30 +0100 Subject: hw/arm/versatilepb: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-12-git-send-email-peter.maydell@linaro.org --- hw/arm/versatilepb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/hw/arm/versatilepb.c b/hw/arm/versatilepb.c index b48d84c674..4a6fceeeaa 100644 --- a/hw/arm/versatilepb.c +++ b/hw/arm/versatilepb.c @@ -178,7 +178,6 @@ static void versatile_init(QEMUMachineInitArgs *args, int board_id) ARMCPU *cpu; MemoryRegion *sysmem = get_system_memory(); MemoryRegion *ram = g_new(MemoryRegion, 1); - qemu_irq *cpu_pic; qemu_irq pic[32]; qemu_irq sic[32]; DeviceState *dev, *sysctl; @@ -211,10 +210,10 @@ static void versatile_init(QEMUMachineInitArgs *args, int board_id) qdev_init_nofail(sysctl); sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000); - cpu_pic = arm_pic_init_cpu(cpu); dev = sysbus_create_varargs("pl190", 0x10140000, - cpu_pic[ARM_PIC_CPU_IRQ], - cpu_pic[ARM_PIC_CPU_FIQ], NULL); + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ), + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ), + NULL); for (n = 0; n < 32; n++) { pic[n] = qdev_get_gpio_in(dev, n); } -- cgit v1.2.3 From fe9120a5d1117523282b44e8aa0027ab2b8a4408 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:30 +0100 Subject: hw/arm/vexpress: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-13-git-send-email-peter.maydell@linaro.org --- hw/arm/vexpress.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/hw/arm/vexpress.c b/hw/arm/vexpress.c index 9586e3880e..fbd71a7b49 100644 --- a/hw/arm/vexpress.c +++ b/hw/arm/vexpress.c @@ -183,7 +183,6 @@ static void a9_daughterboard_init(const VEDBoardInfo *daughterboard, MemoryRegion *lowram = g_new(MemoryRegion, 1); DeviceState *dev; SysBusDevice *busdev; - qemu_irq *irqp; int n; qemu_irq cpu_irq[4]; ram_addr_t low_ram_size; @@ -198,8 +197,7 @@ static void a9_daughterboard_init(const VEDBoardInfo *daughterboard, fprintf(stderr, "Unable to find CPU definition\n"); exit(1); } - irqp = arm_pic_init_cpu(cpu); - cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ]; + cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); } if (ram_size > 0x40000000) { @@ -312,15 +310,13 @@ static void a15_daughterboard_init(const VEDBoardInfo *daughterboard, for (n = 0; n < smp_cpus; n++) { ARMCPU *cpu; - qemu_irq *irqp; cpu = cpu_arm_init(cpu_model); if (!cpu) { fprintf(stderr, "Unable to find CPU definition\n"); exit(1); } - irqp = arm_pic_init_cpu(cpu); - cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ]; + cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); } { -- cgit v1.2.3 From e4a6540dedc6ec109a9ece3f8d83a143b7bde4e6 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:30 +0100 Subject: hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu() Drop the now-deprecated arm_pic_init_cpu() in favour of directly getting the IRQ line from the ARMCPU object. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-14-git-send-email-peter.maydell@linaro.org --- hw/arm/xilinx_zynq.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c index 3444823f3f..0f18c852c4 100644 --- a/hw/arm/xilinx_zynq.c +++ b/hw/arm/xilinx_zynq.c @@ -108,11 +108,9 @@ static void zynq_init(QEMUMachineInitArgs *args) MemoryRegion *ocm_ram = g_new(MemoryRegion, 1); DeviceState *dev; SysBusDevice *busdev; - qemu_irq *irqp; qemu_irq pic[64]; NICInfo *nd; int n; - qemu_irq cpu_irq; if (!cpu_model) { cpu_model = "cortex-a9"; @@ -123,8 +121,6 @@ static void zynq_init(QEMUMachineInitArgs *args) fprintf(stderr, "Unable to find CPU definition\n"); exit(1); } - irqp = arm_pic_init_cpu(cpu); - cpu_irq = irqp[ARM_PIC_CPU_IRQ]; /* max 2GB ram */ if (ram_size > 0x80000000) { @@ -159,7 +155,8 @@ static void zynq_init(QEMUMachineInitArgs *args) qdev_init_nofail(dev); busdev = SYS_BUS_DEVICE(dev); sysbus_mmio_map(busdev, 0, 0xF8F00000); - sysbus_connect_irq(busdev, 0, cpu_irq); + sysbus_connect_irq(busdev, 0, + qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); for (n = 0; n < 64; n++) { pic[n] = qdev_get_gpio_in(dev, n); -- cgit v1.2.3 From b643e4b90bb0b70adde97a09349d8ca7067309d9 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:31 +0100 Subject: hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu() Now all the boards have been converted arm_pic_init_cpu() is unused and can just be deleted. Signed-off-by: Peter Maydell Message-id: 1375977856-25046-15-git-send-email-peter.maydell@linaro.org --- hw/arm/Makefile.objs | 2 +- hw/arm/pic_cpu.c | 25 ------------------------- include/hw/arm/arm.h | 5 ----- 3 files changed, 1 insertion(+), 31 deletions(-) delete mode 100644 hw/arm/pic_cpu.c diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs index 9e3a06fc18..3671b42738 100644 --- a/hw/arm/Makefile.objs +++ b/hw/arm/Makefile.objs @@ -1,6 +1,6 @@ obj-y += boot.o collie.o exynos4_boards.o gumstix.o highbank.o obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o -obj-y += omap_sx1.o palm.o pic_cpu.o realview.o spitz.o stellaris.o +obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o obj-y += tosa.o versatilepb.o vexpress.o xilinx_zynq.o z2.o obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o diff --git a/hw/arm/pic_cpu.c b/hw/arm/pic_cpu.c deleted file mode 100644 index 9c362735c0..0000000000 --- a/hw/arm/pic_cpu.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Generic ARM Programmable Interrupt Controller support. - * - * Copyright (c) 2006 CodeSourcery. - * Written by Paul Brook - * - * This code is licensed under the LGPL - */ - -#include "hw/hw.h" -#include "hw/arm/arm.h" - -/* Backwards compatibility shim; this can disappear when all - * board models have been updated to get IRQ and FIQ lines directly - * from the ARMCPU object rather than by calling this function. - */ -qemu_irq *arm_pic_init_cpu(ARMCPU *cpu) -{ - DeviceState *dev = DEVICE(cpu); - qemu_irq *irqs = g_new(qemu_irq, 2); - - irqs[0] = qdev_get_gpio_in(dev, ARM_CPU_IRQ); - irqs[1] = qdev_get_gpio_in(dev, ARM_CPU_FIQ); - return irqs; -} diff --git a/include/hw/arm/arm.h b/include/hw/arm/arm.h index bae87c6273..ecbbba871e 100644 --- a/include/hw/arm/arm.h +++ b/include/hw/arm/arm.h @@ -14,11 +14,6 @@ #include "exec/memory.h" #include "hw/irq.h" -/* The CPU is also modelled as an interrupt controller. */ -#define ARM_PIC_CPU_IRQ 0 -#define ARM_PIC_CPU_FIQ 1 -qemu_irq *arm_pic_init_cpu(ARMCPU *cpu); - /* armv7m.c */ qemu_irq *armv7m_init(MemoryRegion *address_space_mem, int flash_size, int sram_size, -- cgit v1.2.3 From 22d9e1a986a671ebfacb21555b7533336f3e8259 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:31 +0100 Subject: target-arm: Allow raw_read() and raw_write() to handle 64 bit regs Extend the raw_read() and raw_write() helper accessors so that they can be used for 64 bit registers as well as 32 bit registers. Signed-off-by: Peter Maydell Tested-by: Laurent Desnogues Reviewed-by: Edgar E. Iglesias Message-id: 1376065080-26661-2-git-send-email-peter.maydell@linaro.org --- target-arm/helper.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/target-arm/helper.c b/target-arm/helper.c index 6d9026d04c..f8689e2e23 100644 --- a/target-arm/helper.c +++ b/target-arm/helper.c @@ -67,14 +67,22 @@ static int vfp_gdb_set_reg(CPUARMState *env, uint8_t *buf, int reg) static int raw_read(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t *value) { - *value = CPREG_FIELD32(env, ri); + if (ri->type & ARM_CP_64BIT) { + *value = CPREG_FIELD64(env, ri); + } else { + *value = CPREG_FIELD32(env, ri); + } return 0; } static int raw_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { - CPREG_FIELD32(env, ri) = value; + if (ri->type & ARM_CP_64BIT) { + CPREG_FIELD64(env, ri) = value; + } else { + CPREG_FIELD32(env, ri) = value; + } return 0; } -- cgit v1.2.3 From 2452731c883cb0acd4e47b23039c46cd880cf2c6 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:31 +0100 Subject: target-arm: Support coprocessor registers which do I/O Add an ARM_CP_IO flag which an ARMCPRegInfo definition can use to indicate that the register's implementation does I/O and thus its accesses need to be surrounded by gen_io_start()/gen_io_end() in order for icount to work. Most notably, cp registers which implement clocks or timers need this. Signed-off-by: Peter Maydell Tested-by: Laurent Desnogues Reviewed-by: Edgar E. Iglesias Message-id: 1376065080-26661-3-git-send-email-peter.maydell@linaro.org --- target-arm/cpu.h | 6 +++++- target-arm/translate.c | 16 +++++++++++++--- 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/target-arm/cpu.h b/target-arm/cpu.h index dffeec7455..c2cb534dc7 100644 --- a/target-arm/cpu.h +++ b/target-arm/cpu.h @@ -472,6 +472,9 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) * old must have the OVERRIDE bit set. * NO_MIGRATE indicates that this register should be ignored for migration; * (eg because any state is accessed via some other coprocessor register). + * IO indicates that this register does I/O and therefore its accesses + * need to be surrounded by gen_io_start()/gen_io_end(). In particular, + * registers which implement clocks or timers require this. */ #define ARM_CP_SPECIAL 1 #define ARM_CP_CONST 2 @@ -479,13 +482,14 @@ static inline uint64_t cpreg_to_kvm_id(uint32_t cpregid) #define ARM_CP_SUPPRESS_TB_END 8 #define ARM_CP_OVERRIDE 16 #define ARM_CP_NO_MIGRATE 32 +#define ARM_CP_IO 64 #define ARM_CP_NOP (ARM_CP_SPECIAL | (1 << 8)) #define ARM_CP_WFI (ARM_CP_SPECIAL | (2 << 8)) #define ARM_LAST_SPECIAL ARM_CP_WFI /* Used only as a terminator for ARMCPRegInfo lists */ #define ARM_CP_SENTINEL 0xffff /* Mask of only the flag bits in a type field */ -#define ARM_CP_FLAG_MASK 0x3f +#define ARM_CP_FLAG_MASK 0x7f /* Return true if cptype is a valid type field. This is used to try to * catch errors where the sentinel has been accidentally left off the end diff --git a/target-arm/translate.c b/target-arm/translate.c index 6db4c50df4..d1e8538142 100644 --- a/target-arm/translate.c +++ b/target-arm/translate.c @@ -6280,6 +6280,10 @@ static int disas_coproc_insn(CPUARMState * env, DisasContext *s, uint32_t insn) break; } + if (use_icount && (ri->type & ARM_CP_IO)) { + gen_io_start(); + } + if (isread) { /* Read */ if (is64) { @@ -6369,14 +6373,20 @@ static int disas_coproc_insn(CPUARMState * env, DisasContext *s, uint32_t insn) store_cpu_offset(tmp, ri->fieldoffset); } } + } + + if (use_icount && (ri->type & ARM_CP_IO)) { + /* I/O operations must end the TB here (whether read or write) */ + gen_io_end(); + gen_lookup_tb(s); + } else if (!isread && !(ri->type & ARM_CP_SUPPRESS_TB_END)) { /* We default to ending the TB on a coprocessor register write, * but allow this to be suppressed by the register definition * (usually only necessary to work around guest bugs). */ - if (!(ri->type & ARM_CP_SUPPRESS_TB_END)) { - gen_lookup_tb(s); - } + gen_lookup_tb(s); } + return 0; } -- cgit v1.2.3 From 55d284af8e31bbdf4d545cb2d6481cd0367680fb Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:31 +0100 Subject: target-arm: Implement the generic timer The ARMv7 architecture specifies a 'generic timer' which is implemented via cp15 registers. Newer kernels will prefer to use this rather than a devboard-level timer. Implement the generic timer for TCG; for KVM we will already use the hardware's virtualized timer for this. Signed-off-by: Peter Maydell Tested-by: Laurent Desnogues Message-id: 1376065080-26661-4-git-send-email-peter.maydell@linaro.org --- target-arm/cpu-qom.h | 9 ++ target-arm/cpu.c | 7 ++ target-arm/cpu.h | 18 ++++ target-arm/helper.c | 256 ++++++++++++++++++++++++++++++++++++++++++++++++++- target-arm/machine.c | 8 +- 5 files changed, 290 insertions(+), 8 deletions(-) diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h index cf3658714e..9f47baebf8 100644 --- a/target-arm/cpu-qom.h +++ b/target-arm/cpu-qom.h @@ -86,6 +86,11 @@ typedef struct ARMCPU { uint64_t *cpreg_vmstate_values; int32_t cpreg_vmstate_array_len; + /* Timers used by the generic (architected) timer */ + QEMUTimer *gt_timer[NUM_GTIMERS]; + /* GPIO outputs for generic timer */ + qemu_irq gt_timer_outputs[NUM_GTIMERS]; + /* The instance init functions for implementation-specific subclasses * set these fields to specify the implementation-dependent values of * various constant registers and reset values of non-constant @@ -152,4 +157,8 @@ hwaddr arm_cpu_get_phys_page_debug(CPUState *cpu, vaddr addr); int arm_cpu_gdb_read_register(CPUState *cpu, uint8_t *buf, int reg); int arm_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg); +/* Callback functions for the generic timer's timers. */ +void arm_gt_ptimer_cb(void *opaque); +void arm_gt_vtimer_cb(void *opaque); + #endif diff --git a/target-arm/cpu.c b/target-arm/cpu.c index 6f56aa86db..f01ce03682 100644 --- a/target-arm/cpu.c +++ b/target-arm/cpu.c @@ -203,6 +203,13 @@ static void arm_cpu_initfn(Object *obj) } else { qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 2); } + + cpu->gt_timer[GTIMER_PHYS] = qemu_new_timer(vm_clock, GTIMER_SCALE, + arm_gt_ptimer_cb, cpu); + cpu->gt_timer[GTIMER_VIRT] = qemu_new_timer(vm_clock, GTIMER_SCALE, + arm_gt_vtimer_cb, cpu); + qdev_init_gpio_out(DEVICE(cpu), cpu->gt_timer_outputs, + ARRAY_SIZE(cpu->gt_timer_outputs)); #endif if (tcg_enabled() && !inited) { diff --git a/target-arm/cpu.h b/target-arm/cpu.h index c2cb534dc7..f2abdf37ce 100644 --- a/target-arm/cpu.h +++ b/target-arm/cpu.h @@ -79,6 +79,21 @@ struct arm_boot_info; s<2n+1> maps to the most significant half of d */ +/* CPU state for each instance of a generic timer (in cp15 c14) */ +typedef struct ARMGenericTimer { + uint64_t cval; /* Timer CompareValue register */ + uint32_t ctl; /* Timer Control register */ +} ARMGenericTimer; + +#define GTIMER_PHYS 0 +#define GTIMER_VIRT 1 +#define NUM_GTIMERS 2 + +/* Scale factor for generic timers, ie number of ns per tick. + * This gives a 62.5MHz timer. + */ +#define GTIMER_SCALE 16 + typedef struct CPUARMState { /* Regs for current mode. */ uint32_t regs[16]; @@ -146,6 +161,9 @@ typedef struct CPUARMState { uint32_t c13_tls1; /* User RW Thread register. */ uint32_t c13_tls2; /* User RO Thread register. */ uint32_t c13_tls3; /* Privileged Thread register. */ + uint32_t c14_cntfrq; /* Counter Frequency register */ + uint32_t c14_cntkctl; /* Timer Control register */ + ARMGenericTimer c14_timer[NUM_GTIMERS]; uint32_t c15_cpar; /* XScale Coprocessor Access Register */ uint32_t c15_ticonfig; /* TI925T configuration byte. */ uint32_t c15_i_max; /* Maximum D-cache dirty line index. */ diff --git a/target-arm/helper.c b/target-arm/helper.c index f8689e2e23..f4e1b06d23 100644 --- a/target-arm/helper.c +++ b/target-arm/helper.c @@ -695,15 +695,261 @@ static const ARMCPRegInfo v6k_cp_reginfo[] = { REGINFO_SENTINEL }; +#ifndef CONFIG_USER_ONLY + +static uint64_t gt_get_countervalue(CPUARMState *env) +{ + return qemu_get_clock_ns(vm_clock) / GTIMER_SCALE; +} + +static void gt_recalc_timer(ARMCPU *cpu, int timeridx) +{ + ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; + + if (gt->ctl & 1) { + /* Timer enabled: calculate and set current ISTATUS, irq, and + * reset timer to when ISTATUS next has to change + */ + uint64_t count = gt_get_countervalue(&cpu->env); + /* Note that this must be unsigned 64 bit arithmetic: */ + int istatus = count >= gt->cval; + uint64_t nexttick; + + gt->ctl = deposit32(gt->ctl, 2, 1, istatus); + qemu_set_irq(cpu->gt_timer_outputs[timeridx], + (istatus && !(gt->ctl & 2))); + if (istatus) { + /* Next transition is when count rolls back over to zero */ + nexttick = UINT64_MAX; + } else { + /* Next transition is when we hit cval */ + nexttick = gt->cval; + } + /* Note that the desired next expiry time might be beyond the + * signed-64-bit range of a QEMUTimer -- in this case we just + * set the timer for as far in the future as possible. When the + * timer expires we will reset the timer for any remaining period. + */ + if (nexttick > INT64_MAX / GTIMER_SCALE) { + nexttick = INT64_MAX / GTIMER_SCALE; + } + qemu_mod_timer(cpu->gt_timer[timeridx], nexttick); + } else { + /* Timer disabled: ISTATUS and timer output always clear */ + gt->ctl &= ~4; + qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0); + qemu_del_timer(cpu->gt_timer[timeridx]); + } +} + +static int gt_cntfrq_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + /* Not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero */ + if (arm_current_pl(env) == 0 && !extract32(env->cp15.c14_cntkctl, 0, 2)) { + return EXCP_UDEF; + } + *value = env->cp15.c14_cntfrq; + return 0; +} + +static void gt_cnt_reset(CPUARMState *env, const ARMCPRegInfo *ri) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + int timeridx = ri->opc1 & 1; + + qemu_del_timer(cpu->gt_timer[timeridx]); +} + +static int gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->opc1 & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, timeridx, 1)) { + return EXCP_UDEF; + } + *value = gt_get_countervalue(env); + return 0; +} + +static int gt_cval_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->opc1 & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { + return EXCP_UDEF; + } + *value = env->cp15.c14_timer[timeridx].cval; + return 0; +} + +static int gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + int timeridx = ri->opc1 & 1; + + env->cp15.c14_timer[timeridx].cval = value; + gt_recalc_timer(arm_env_get_cpu(env), timeridx); + return 0; +} +static int gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->crm & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { + return EXCP_UDEF; + } + *value = (uint32_t)(env->cp15.c14_timer[timeridx].cval - + gt_get_countervalue(env)); + return 0; +} + +static int gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + int timeridx = ri->crm & 1; + + env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) + + + sextract64(value, 0, 32); + gt_recalc_timer(arm_env_get_cpu(env), timeridx); + return 0; +} + +static int gt_ctl_read(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t *value) +{ + int timeridx = ri->crm & 1; + + if (arm_current_pl(env) == 0 && + !extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { + return EXCP_UDEF; + } + *value = env->cp15.c14_timer[timeridx].ctl; + return 0; +} + +static int gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, + uint64_t value) +{ + ARMCPU *cpu = arm_env_get_cpu(env); + int timeridx = ri->crm & 1; + uint32_t oldval = env->cp15.c14_timer[timeridx].ctl; + + env->cp15.c14_timer[timeridx].ctl = value & 3; + if ((oldval ^ value) & 1) { + /* Enable toggled */ + gt_recalc_timer(cpu, timeridx); + } else if ((oldval & value) & 2) { + /* IMASK toggled: don't need to recalculate, + * just set the interrupt line based on ISTATUS + */ + qemu_set_irq(cpu->gt_timer_outputs[timeridx], + (oldval & 4) && (value & 2)); + } + return 0; +} + +void arm_gt_ptimer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + gt_recalc_timer(cpu, GTIMER_PHYS); +} + +void arm_gt_vtimer_cb(void *opaque) +{ + ARMCPU *cpu = opaque; + + gt_recalc_timer(cpu, GTIMER_VIRT); +} + static const ARMCPRegInfo generic_timer_cp_reginfo[] = { - /* Dummy implementation: RAZ/WI the whole crn=14 space */ - { .name = "GENERIC_TIMER", .cp = 15, .crn = 14, - .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, - .access = PL1_RW, .type = ARM_CP_CONST | ARM_CP_NO_MIGRATE, - .resetvalue = 0 }, + /* Note that CNTFRQ is purely reads-as-written for the benefit + * of software; writing it doesn't actually change the timer frequency. + * Our reset value matches the fixed frequency we implement the timer at. + */ + { .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0, + .access = PL1_RW | PL0_R, + .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), + .resetvalue = (1000 * 1000 * 1000) / GTIMER_SCALE, + .readfn = gt_cntfrq_read, .raw_readfn = raw_read, + }, + /* overall control: mostly access permissions */ + { .name = "CNTKCTL", .cp = 15, .crn = 14, .crm = 1, .opc1 = 0, .opc2 = 0, + .access = PL1_RW, + .fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl), + .resetvalue = 0, + }, + /* per-timer control */ + { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1, + .type = ARM_CP_IO, .access = PL1_RW | PL0_R, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), + .resetvalue = 0, + .readfn = gt_ctl_read, .writefn = gt_ctl_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, + { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1, + .type = ARM_CP_IO, .access = PL1_RW | PL0_R, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), + .resetvalue = 0, + .readfn = gt_ctl_read, .writefn = gt_ctl_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, + /* TimerValue views: a 32 bit downcounting view of the underlying state */ + { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0, + .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R, + .readfn = gt_tval_read, .writefn = gt_tval_write, + }, + { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0, + .type = ARM_CP_NO_MIGRATE | ARM_CP_IO, .access = PL1_RW | PL0_R, + .readfn = gt_tval_read, .writefn = gt_tval_write, + }, + /* The counter itself */ + { .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0, + .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO, + .readfn = gt_cnt_read, .resetfn = gt_cnt_reset, + }, + { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1, + .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE | ARM_CP_IO, + .readfn = gt_cnt_read, .resetfn = gt_cnt_reset, + }, + /* Comparison value, indicating when the timer goes off */ + { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2, + .access = PL1_RW | PL0_R, + .type = ARM_CP_64BIT | ARM_CP_IO, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), + .resetvalue = 0, + .readfn = gt_cval_read, .writefn = gt_cval_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, + { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3, + .access = PL1_RW | PL0_R, + .type = ARM_CP_64BIT | ARM_CP_IO, + .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), + .resetvalue = 0, + .readfn = gt_cval_read, .writefn = gt_cval_write, + .raw_readfn = raw_read, .raw_writefn = raw_write, + }, REGINFO_SENTINEL }; +#else +/* In user-mode none of the generic timer registers are accessible, + * and their implementation depends on vm_clock and qdev gpio outputs, + * so instead just don't register any of them. + */ +static const ARMCPRegInfo generic_timer_cp_reginfo[] = { + REGINFO_SENTINEL +}; + +#endif + static int par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) { if (arm_feature(env, ARM_FEATURE_LPAE)) { diff --git a/target-arm/machine.c b/target-arm/machine.c index 6d4c2d4ed0..5b6f3754ca 100644 --- a/target-arm/machine.c +++ b/target-arm/machine.c @@ -222,9 +222,9 @@ static int cpu_post_load(void *opaque, int version_id) const VMStateDescription vmstate_arm_cpu = { .name = "cpu", - .version_id = 12, - .minimum_version_id = 12, - .minimum_version_id_old = 12, + .version_id = 13, + .minimum_version_id = 13, + .minimum_version_id_old = 13, .pre_save = cpu_pre_save, .post_load = cpu_post_load, .fields = (VMStateField[]) { @@ -257,6 +257,8 @@ const VMStateDescription vmstate_arm_cpu = { VMSTATE_UINT32(env.exclusive_val, ARMCPU), VMSTATE_UINT32(env.exclusive_high, ARMCPU), VMSTATE_UINT64(env.features, ARMCPU), + VMSTATE_TIMER(gt_timer[GTIMER_PHYS], ARMCPU), + VMSTATE_TIMER(gt_timer[GTIMER_VIRT], ARMCPU), VMSTATE_END_OF_LIST() }, .subsections = (VMStateSubsection[]) { -- cgit v1.2.3 From 6033e840c7b1db1055d02199fa3a28a4fd7b2386 Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:32 +0100 Subject: hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs Now our A15 CPU implements the generic timers, we can wire them up to the appropriate inputs on the GIC. Signed-off-by: Peter Maydell Tested-by: Laurent Desnogues Message-id: 1376065080-26661-5-git-send-email-peter.maydell@linaro.org --- hw/cpu/a15mpcore.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/hw/cpu/a15mpcore.c b/hw/cpu/a15mpcore.c index 4f37964434..af182da4ee 100644 --- a/hw/cpu/a15mpcore.c +++ b/hw/cpu/a15mpcore.c @@ -49,6 +49,8 @@ static int a15mp_priv_init(SysBusDevice *dev) A15MPPrivState *s = A15MPCORE_PRIV(dev); SysBusDevice *busdev; const char *gictype = "arm_gic"; + int i; + CPUState *cpu; if (kvm_irqchip_in_kernel()) { gictype = "kvm-arm-gic"; @@ -67,6 +69,22 @@ static int a15mp_priv_init(SysBusDevice *dev) /* Pass through inbound GPIO lines to the GIC */ qdev_init_gpio_in(DEVICE(dev), a15mp_priv_set_irq, s->num_irq - 32); + /* Wire the outputs from each CPU's generic timer to the + * appropriate GIC PPI inputs + */ + for (i = 0, cpu = first_cpu; i < s->num_cpu; i++, cpu = cpu->next_cpu) { + DeviceState *cpudev = DEVICE(cpu); + int ppibase = s->num_irq - 32 + i * 32; + /* physical timer; we wire it up to the non-secure timer's ID, + * since a real A15 always has TrustZone but QEMU doesn't. + */ + qdev_connect_gpio_out(cpudev, 0, + qdev_get_gpio_in(s->gic, ppibase + 30)); + /* virtual timer */ + qdev_connect_gpio_out(cpudev, 1, + qdev_get_gpio_in(s->gic, ppibase + 27)); + } + /* Memory map (addresses are offsets from PERIPHBASE): * 0x0000-0x0fff -- reserved * 0x1000-0x1fff -- GIC Distributor -- cgit v1.2.3 From 66aae5e1ecc38e8658c5cc69a0b3ceeb4967619c Mon Sep 17 00:00:00 2001 From: Peter Maydell Date: Tue, 20 Aug 2013 14:54:32 +0100 Subject: default-configs: Fix A9MP and A15MP config names When individual CONFIG_ switches for the A9MPcore and A15MPcore devices were created, they were inadvertently given incorrect names (CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are "Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is a different (rather older) CPU than the Cortex-A9. Rename the CONFIG_ switches to bring them into line with the source file names and CPU names. Signed-off-by: Peter Maydell Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org --- default-configs/arm-softmmu.mak | 4 ++-- hw/cpu/Makefile.objs | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak index 27cbe3d088..ac0815d663 100644 --- a/default-configs/arm-softmmu.mak +++ b/default-configs/arm-softmmu.mak @@ -34,9 +34,9 @@ CONFIG_PFLASH_CFI02=y CONFIG_MICRODRIVE=y CONFIG_USB_MUSB=y -CONFIG_ARM9MPCORE=y CONFIG_ARM11MPCORE=y -CONFIG_ARM15MPCORE=y +CONFIG_A9MPCORE=y +CONFIG_A15MPCORE=y CONFIG_ARM_GIC=y CONFIG_ARM_GIC_KVM=$(CONFIG_KVM) diff --git a/hw/cpu/Makefile.objs b/hw/cpu/Makefile.objs index 4461eceee8..df287c1d8c 100644 --- a/hw/cpu/Makefile.objs +++ b/hw/cpu/Makefile.objs @@ -1,5 +1,5 @@ obj-$(CONFIG_ARM11MPCORE) += arm11mpcore.o -obj-$(CONFIG_ARM9MPCORE) += a9mpcore.o -obj-$(CONFIG_ARM15MPCORE) += a15mpcore.o +obj-$(CONFIG_A9MPCORE) += a9mpcore.o +obj-$(CONFIG_A15MPCORE) += a15mpcore.o obj-$(CONFIG_ICC_BUS) += icc_bus.o -- cgit v1.2.3 From 230058106ab26de9b876158dbe27d60719f01f51 Mon Sep 17 00:00:00 2001 From: Peter Chubb Date: Tue, 20 Aug 2013 14:54:32 +0100 Subject: hw/timer/imx_epit: Simplify and fix imx_epit implementation When imx_epit.c was last refactored, a common usecase (comparison register zero) broke. This patch fixes that, and simplifies the code yet more. It also fixes a major thinko in the reset path --- the wrong bits in the control register were being cleared. Signed-off-by: Peter Chubb Reviewed-by: Jean-Christophe DUBOIS Signed-off-by: Peter Maydell --- hw/timer/imx_epit.c | 94 ++++++++++++++++++++--------------------------------- 1 file changed, 36 insertions(+), 58 deletions(-) diff --git a/hw/timer/imx_epit.c b/hw/timer/imx_epit.c index 117dc7bcbb..dc73d6525d 100644 --- a/hw/timer/imx_epit.c +++ b/hw/timer/imx_epit.c @@ -43,7 +43,7 @@ static char const *imx_epit_reg_name(uint32_t reg) } # define DPRINTF(fmt, args...) \ - do { printf("%s: " fmt , __func__, ##args); } while (0) + do { fprintf(stderr, "%s: " fmt , __func__, ##args); } while (0) #else # define DPRINTF(fmt, args...) do {} while (0) #endif @@ -152,7 +152,7 @@ static void imx_epit_reset(DeviceState *dev) /* * Soft reset doesn't touch some bits; hard reset clears them */ - s->cr &= ~(CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); + s->cr &= (CR_EN|CR_ENMOD|CR_STOPEN|CR_DOZEN|CR_WAITEN|CR_DBGEN); s->sr = 0; s->lr = TIMER_MAX; s->cmp = 0; @@ -167,7 +167,7 @@ static void imx_epit_reset(DeviceState *dev) ptimer_set_limit(s->timer_reload, TIMER_MAX, 1); if (s->freq && (s->cr & CR_EN)) { /* if the timer is still enabled, restart it */ - ptimer_run(s->timer_reload, 1); + ptimer_run(s->timer_reload, 0); } } @@ -218,17 +218,17 @@ static uint64_t imx_epit_read(void *opaque, hwaddr offset, unsigned size) static void imx_epit_reload_compare_timer(IMXEPITState *s) { - if ((s->cr & CR_OCIEN) && s->cmp) { - /* if the compare feature is on */ + if ((s->cr & (CR_EN | CR_OCIEN)) == (CR_EN | CR_OCIEN)) { + /* if the compare feature is on and timers are running */ uint32_t tmp = imx_epit_update_count(s); + uint64_t next; if (tmp > s->cmp) { - /* reinit the cmp timer if required */ - ptimer_set_count(s->timer_cmp, tmp - s->cmp); - if ((s->cr & CR_EN)) { - /* Restart the cmp timer if required */ - ptimer_run(s->timer_cmp, 0); - } + /* It'll fire in this round of the timer */ + next = tmp - s->cmp; + } else { /* catch it next time around */ + next = tmp - s->cmp + ((s->cr & CR_RLD) ? TIMER_MAX : s->lr); } + ptimer_set_count(s->timer_cmp, next); } } @@ -237,11 +237,14 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, { IMXEPITState *s = IMX_EPIT(opaque); uint32_t reg = offset >> 2; + uint64_t oldcr; DPRINTF("(%s, value = 0x%08x)\n", imx_epit_reg_name(reg), (uint32_t)value); switch (reg) { case 0: /* CR */ + + oldcr = s->cr; s->cr = value & 0x03ffffff; if (s->cr & CR_SWR) { /* handle the reset */ @@ -250,22 +253,35 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, imx_epit_set_freq(s); } - if (s->freq && (s->cr & CR_EN)) { + if (s->freq && (s->cr & CR_EN) && !(oldcr & CR_EN)) { if (s->cr & CR_ENMOD) { if (s->cr & CR_RLD) { ptimer_set_limit(s->timer_reload, s->lr, 1); + ptimer_set_limit(s->timer_cmp, s->lr, 1); } else { ptimer_set_limit(s->timer_reload, TIMER_MAX, 1); + ptimer_set_limit(s->timer_cmp, TIMER_MAX, 1); } } imx_epit_reload_compare_timer(s); - - ptimer_run(s->timer_reload, 1); - } else { + ptimer_run(s->timer_reload, 0); + if (s->cr & CR_OCIEN) { + ptimer_run(s->timer_cmp, 0); + } else { + ptimer_stop(s->timer_cmp); + } + } else if (!(s->cr & CR_EN)) { /* stop both timers */ ptimer_stop(s->timer_reload); ptimer_stop(s->timer_cmp); + } else if (s->cr & CR_OCIEN) { + if (!(oldcr & CR_OCIEN)) { + imx_epit_reload_compare_timer(s); + ptimer_run(s->timer_cmp, 0); + } + } else { + ptimer_stop(s->timer_cmp); } break; @@ -284,13 +300,13 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, /* Also set the limit if the LRD bit is set */ /* If IOVW bit is set then set the timer value */ ptimer_set_limit(s->timer_reload, s->lr, s->cr & CR_IOVW); + ptimer_set_limit(s->timer_cmp, s->lr, 0); } else if (s->cr & CR_IOVW) { /* If IOVW bit is set then set the timer value */ ptimer_set_count(s->timer_reload, s->lr); } imx_epit_reload_compare_timer(s); - break; case 3: /* CMP */ @@ -306,51 +322,14 @@ static void imx_epit_write(void *opaque, hwaddr offset, uint64_t value, break; } } - -static void imx_epit_timeout(void *opaque) -{ - IMXEPITState *s = IMX_EPIT(opaque); - - DPRINTF("\n"); - - if (!(s->cr & CR_EN)) { - return; - } - - if (s->cr & CR_RLD) { - ptimer_set_limit(s->timer_reload, s->lr, 1); - } else { - ptimer_set_limit(s->timer_reload, TIMER_MAX, 1); - } - - if (s->cr & CR_OCIEN) { - /* if compare register is 0 then we handle the interrupt here */ - if (s->cmp == 0) { - s->sr = 1; - imx_epit_update_int(s); - } else if (s->cmp <= s->lr) { - /* We should launch the compare register */ - ptimer_set_count(s->timer_cmp, s->lr - s->cmp); - ptimer_run(s->timer_cmp, 0); - } else { - IPRINTF("s->lr < s->cmp\n"); - } - } -} - static void imx_epit_cmp(void *opaque) { IMXEPITState *s = IMX_EPIT(opaque); - DPRINTF("\n"); - - ptimer_stop(s->timer_cmp); + DPRINTF("sr was %d\n", s->sr); - /* compare register is not 0 */ - if (s->cmp) { - s->sr = 1; - imx_epit_update_int(s); - } + s->sr = 1; + imx_epit_update_int(s); } void imx_timerp_create(const hwaddr addr, qemu_irq irq, DeviceState *ccm) @@ -400,8 +379,7 @@ static void imx_epit_realize(DeviceState *dev, Error **errp) 0x00001000); sysbus_init_mmio(sbd, &s->iomem); - bh = qemu_bh_new(imx_epit_timeout, s); - s->timer_reload = ptimer_init(bh); + s->timer_reload = ptimer_init(NULL); bh = qemu_bh_new(imx_epit_cmp, s); s->timer_cmp = ptimer_init(bh); -- cgit v1.2.3