summaryrefslogtreecommitdiff
path: root/vl.c
AgeCommit message (Collapse)Author
2018-06-11cli: Don't run early event loop if no --preconfig was specifiedIgor Mammedov
After 047f7038f586d215 it is possible for event loop to run two times. First time whilst parsing command line options (the idea is to bring up monitor early so that management applications can tweak config before machine is initialized). And the second time is after everything is set up (this is the usual place). In both cases the event loop is called as main_loop_wait(nonblocking = false) which causes the event loop to block until at least one event occurred. Now, consider that somebody (i.e. libvirt) calls us with -daemonize. This operation is split in two steps. The main() calls os_daemonize() which fork()-s and then waits in read() until child notifies it via write(): /qemu.git $ ./x86_64-softmmu/qemu-system-x86_64 -S -daemonize \ -no-user-config -nodefaults -nographic main(): child: os_daemonize(): read(pipe[0]) main_loop(): main_loop_wait(false) os_setup_post(): write(pipe[1]) main_loop(): main_loop_wait(false) Here it can be clearly seen that main() does not exit until an event occurs, but at the same time nobody will touch the monitor socket until their exec("qemu-system-*") finishes. So the whole thing deadlocks. The solution is to not call main_loop_wait() unless --preconfig was specified (in which case caller knows they must connect to the socket before exec() finishes). Patch also fixes hang when -nodefaults option is used, which were causing QEMU hang in the early main_loop_wait() indefinitely by the same means (not calling main_loop_wait() unless --preconfig is present on CLI) Based on From: Michal Privoznik <mprivozn@redhat.com> Subject: [PATCH] cli: Don't run early event loop if no --preconfig was specified Message-Id: <ad910973c593c5ac2fed3a10ea958f7e9c12f82c.1527935663.git.mprivozn@redhat.com> Fixes: 047f7038f586d215 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <1528207243-268226-2-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01qemu-options: Mark the non-functional -clock option as deprecatedThomas Huth
The function is only ignored since QEMU version 1.7.0. Let's mark it as deprecated, so that we can finally completely remove it soon. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1526990298-17924-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01sandbox: disable -sandbox if CONFIG_SECCOMP undefinedYi Min Zhao
If CONFIG_SECCOMP is undefined, the option 'elevatedprivileges' remains compiled. This would make libvirt set the corresponding capability and then trigger failure during guest startup. This patch moves the code regarding seccomp command line options to qemu-seccomp.c file and wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP. Because parse_sandbox() is moved into qemu-seccomp.c file, change seccomp_start() to static function. Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Tested-by: Ján Tomko <jtomko@redhat.com> Acked-by: Eduardo Otubo <otubo@redhat.com>
2018-05-31sandbox: disable -sandbox if CONFIG_SECCOMP undefinedYi Min Zhao
If CONFIG_SECCOMP is undefined, the option 'elevateprivileges' remains compiled. This would make libvirt set the corresponding capability and then trigger failure during guest startup. This patch moves the code regarding seccomp command line options to qemu-seccomp.c file and wraps qemu_opts_foreach finding sandbox option with CONFIG_SECCOMP. Because parse_sandbox() is moved into qemu-seccomp.c file, change seccomp_start() to static function. Signed-off-by: Yi Min Zhao <zyimin@linux.ibm.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Tested-by: Ján Tomko <jtomko@redhat.com> Acked-by: Eduardo Otubo <otubo@redhat.com> Message-Id: <20180531032937.1925-1-zyimin@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-30cli: add --preconfig optionIgor Mammedov
This option allows pausing QEMU in the new RUN_STATE_PRECONFIG state, allowing the configuration of QEMU from QMP before the machine jumps into board initialization code of machine_run_board_init() The intent is to allow management to query machine state and additionally configure it using previous query results within one QEMU instance (i.e. eliminate the need to start QEMU twice, 1st to query board specific parameters and 2nd for actual VM start using query results for additional parameters). The new option complements -S option and could be used with or without it. The difference is that -S pauses QEMU when the machine is completely initialized with all devices wired up and ready to execute guest code (QEMU needs only to unpause VCPUs to let guest execute its code), while the "preconfig" option pauses QEMU early before board specific init callback (machine_run_board_init) is executed and allows the configuration of machine parameters which will be used by board init code. When early introspection/configuration is done, command 'exit-preconfig' should be used to exit RUN_STATE_PRECONFIG and transition to the next requested state (i.e. if -S is used then QEMU will pause the second time when board/device initialization is completed or start guest execution if -S isn't provided on CLI) PS: Initially 'preconfig' is planned to be used for configuring numa topology depending on board specified possible cpus layout. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1526059483-42847-1-git-send-email-imammedo@redhat.com> [ehabkost: Changed "since 2.13" to "since 3.0"] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-05-23block: Cancel job in bdrv_close_all() callersKevin Wolf
Now that we cancel all jobs and not only block jobs on shutdown, doing that in bdrv_close_all() isn't really appropriate any more. Move the job_cancel_sync_all() call to the callers, and only assert that there are no job running in bdrv_close_all(). Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2018-05-20qemu-options: Allow -no-user-config againMichal Privoznik
After 1217d6ca2bf28c0febe1bd7d5b3fa912bbf6af2a we error out explicitly if an unknown -option was passed on the command line. However, we are doing two pass command line option parsing. In the first pass we just look for -no-user-config or -nodefconfig being present which determines whether we load user config or not. Then in the second pass we finally parse everything else throwing an error if an unsupported -option was found. Problem is that in the second pass -no-user-config and -nodefconfig are not handled explicitly which makes us throw the unsupported option error. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2018-05-15ui: document non-qapi parser cases.Gerd Hoffmann
Add comments to the cases not (yet) switched over to parse_display_qapi(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180507095539.19584-5-kraxel@redhat.com
2018-05-15ui: switch gtk display to qapi parserGerd Hoffmann
Drop the gtk option parser from parse_display(), so parse_display_qapi() will handle it instead. With this change the parser will accept gl=core and gl=es too, gtk must catch the unsupported gles variant now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180507095539.19584-4-kraxel@redhat.com
2018-05-15ui: switch trivial displays to qapi parserGerd Hoffmann
Drop the option-less display types (egl-headless, curses, none) from parse_display(), so they'll be handled by parse_display_qapi(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180507095539.19584-3-kraxel@redhat.com
2018-05-15ui: add qapi parser for -displayGerd Hoffmann
Add parse_display_qapi() function which parses the -display command line using a qapi visitor for DisplayOptions. Wire up as default catch in parse_display(). Improves the error message for unknown display types. Also enables json as -display argument, i.e. -display "{ 'type': 'gtk' }" Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180507095539.19584-2-kraxel@redhat.com
2018-05-09qemu-options: Remove deprecated -no-kvm-irqchipThomas Huth
We've never documented this option in our qemu-doc, so apart from the users that already used the old qemu-kvm fork before, most users should not be aware of this option at all. It's been marked as deprecated in the source code for a long time already, and officially marked as deprecated in the documentation since QEMU v2.10, so it should be fine to remove this now. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525453270-23074-5-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09qemu-options: Remove deprecated -no-kvm-pit-reinjectionThomas Huth
Deprecated since the beginning when it was added for compatibility with the ancient qemu-kvm fork of QEMU, and it even printed out the deprecation warning since right from the start (i.e. QEMU v1.3.0), so it's really time to remove this now. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525453270-23074-4-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09qemu-options: Bail out on unsupported options instead of silently ignoring themThomas Huth
The dangling remainder of the -tdf option revealed a deficiency in our option parsing: Options that have been declared, but are not supported in the switch-case statement in vl.c and not handled in the OS-specifc os_parse_cmd_args() functions are currently silently ignored. We should rather tell the users that they specified something that we can not handle, so let's print an error message and exit instead. Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525453270-23074-3-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-09qemu-options: Mark -virtioconsole as deprecatedThomas Huth
The qemu-doc already states that this option is only maintained for backward compatibility and "-device virtconsole" should be used instead. So let's take the next step and mark this option officially as deprecated. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1525446790-16139-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-07vl: allow 'maxmem' without 'slot'David Hildenbrand
We will be able to have memory devices (e.g. virtio) not requiring the slot parameter (e.g. not exposed via ACPI). We still need the maxmem parameter to setup a proper memory region for device memory. And some architectures (e.g. s390x) will have to set up the maximum possible guest address space size based on the maxmem parameter. As far as I can see, all code (pc.c,spapr.c,ACPI code) should handle !slots just fine, even though maxmem is set. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-12-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-04-30hw/s390x: Allow to configure the consoles with the "-serial" parameterThomas Huth
The consoles ("sclpconsole" and "sclplmconsole") can only be configured with "-device" and "-chardev" so far. Other machines use the convenience option "-serial" to configure the default consoles, even for virtual consoles like spapr-vty on the pseries machine. So let's support this option on s390x, too. This way we can easily enable the serial console here again with "-nodefaults", for example: qemu-system-s390x -no-shutdown -nographic -nodefaults -serial mon:stdio ... which is way shorter than typing: qemu-system-s390x -no-shutdown -nographic -nodefaults \ -chardev stdio,id=c1,mux=on -device sclpconsole,chardev=c1 \ -mon chardev=c1 The -serial parameter can also be used if you only want to see the QEMU monitor on stdio without using -nodefaults, but not the console output. That's something that is pretty impossible with the current code today: qemu-system-s390x -no-shutdown -nographic -serial none While we're at it, this patch also maps the second -serial option to the "sclplmconsole", so that there is now an easy way to configure this second console on s390x, too, for example: qemu-system-s390x -no-shutdown -nographic -serial null -serial mon:stdio Additionally, the new code is also smaller than the old one and we have less s390x-specific code in vl.c :-) I've also checked that migration still works as expected by migrating a guest with console output back and forth between a qemu-system-s390x that has this patch and an instance without this patch. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1524754794-28005-1-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-04-27Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180427-pull-request' ↵Peter Maydell
into staging vnc: fix use-after-free. sdl2: gles support. vfio-display: add reset support. # gpg: Signature made Fri 27 Apr 2018 10:54:17 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180427-pull-request: ui: introduce vfio_display_reset console: introduce dpy_gfx_update_full sdl: Allow OpenGL ES context creation sdl: Move DisplayOptions global to sdl2_console qapi: Parameter gl of DisplayType now accept an enum vnc: fix use-after-free Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-27sdl: Allow OpenGL ES context creationElie Tournier
Signed-off-by: Elie Tournier <elie.tournier@collabora.com> Message-id: 20180413135842.21325-4-tournier.elie@gmail.com [ kraxel: fix indent ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-27qapi: Parameter gl of DisplayType now accept an enumElie Tournier
v2: Rebase on top of master v3: Fix the json format (Eric Blake) Fix a comparison issue (Gerd Hoffmann) Signed-off-by: Elie Tournier <elie.tournier@collabora.com> Message-id: 20180413135842.21325-2-tournier.elie@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-04-26AccelClass: Introduce accel_setup_postIan Jackson
This is called just before os_setup_post. Currently none of the accelerators provide this hook, but the Xen one is going to provide one in a moment. Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2018-04-26vl.c: new function serial_max_hds()Peter Maydell
Create a new function serial_max_hds() which returns the number of serial ports defined by the user. This is needed only by spapr. This allows us to remove the MAX_SERIAL_PORTS define. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420145249.32435-14-peter.maydell@linaro.org
2018-04-26vl.c: Remove compile time limit on number of serial portsPeter Maydell
Instead of having a fixed sized global serial_hds[] array, use a local dynamically reallocated one, so we don't have a compile time limit on how many serial ports a system has. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420145249.32435-13-peter.maydell@linaro.org
2018-04-26vl.c: Provide accessor function serial_hd() for serial_hds[] arrayPeter Maydell
Provide an accessor function serial_hd() to return the Chardev (if any) associated with the numbered serial port. This will be used to replace direct accesses to the serial_hds[] array, so that calling code doesn't need to care about the size of that array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420145249.32435-7-peter.maydell@linaro.org
2018-03-27gdbstub: send a termination packet instead of crashing gdbKONRAD Frederic
Since the commit: commit 4486e89c219c0d1b9bd8dfa0b1dd5b0d51ff2268 Author: Stefan Hajnoczi <stefanha@redhat.com> Date: Wed Mar 7 14:42:05 2018 +0000 vl: introduce vm_shutdown() GDB crashes when qemu exits (at least on sparc-softmmu): Remote communication error. Target disconnected.: Connection reset by peer. Quitting: putpkt: write failed: Broken pipe. So send a packet to exit GDB before we exit QEMU: [Inferior 1 (Thread 0) exited normally] Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com> Message-id: 1521538773-30802-1-git-send-email-frederic.konrad@adacore.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-27monitor: new parameter "x-oob"Peter Xu
Add new parameter to optionally enable Out-Of-Band for a QMP server. An example command line: ./qemu-system-x86_64 -chardev stdio,id=char0 \ -mon chardev=char0,mode=control,x-oob=on By default, Out-Of-Band is off. It is not allowed if either MUX or non-QMP is detected, since Out-Of-Band is currently only for QMP, and non-MUX chardev backends. Note that the client STILL has to request 'oob' during qmp_capabilities; in part because the x-oob command line option may disappear in the future if we decide the capabilities negotiation is sufficient. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180326063901.27425-4-peterx@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: enhance commit message] Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine and x86 queue, 2018-03-19 * cpu_model/cpu_type cleanups * x86: Fix on Intel Processor Trace CPUID checks # gpg: Signature made Mon 19 Mar 2018 20:07:14 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: i386: Disable Intel PT if packets IP payloads have LIP values cpu: drop unnecessary NULL check and cpu_common_class_by_name() cpu: get rid of unused cpu_init() defines Use cpu_create(type) instead of cpu_init(cpu_model) cpu: add CPU_RESOLVING_TYPE macro tests: add machine 'none' with -cpu test nios2: 10m50_devboard: replace cpu_model with cpu_type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-20postcopy: Add notifier chainDr. David Alan Gilbert
Add a notifier chain for postcopy with a 'reason' flag and an opportunity for a notifier member to return an error. Call it when enabling postcopy. This will initially used to enable devices to declare they're unable to postcopy and later to notify of devices of stages within postcopy. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-19monitor: unify global initPeter Xu
There are many places where the monitor initializes its globals: - monitor_init_qmp_commands() at the very beginning - single function to init monitor_lock - in the first entry of monitor_init() using "is_first_init" Unify them a bit. monitor_lock is not used before monitor_init() (as confirmed by code analysis and gdb watchpoints); so we are safe delaying what was a constructor-time initialization of the mutex into the later first call to monitor_init(). Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180309090006.10018-8-peterx@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-19Use cpu_create(type) instead of cpu_init(cpu_model)Igor Mammedov
With all targets defining CPU_RESOLVING_TYPE, refactor cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model) so that callers won't have to know internal resolving cpu type. Place it in exec.c so it could be called from both target independed vl.c and *-user/main.c. That allows us to stop abusing cpu type from MachineClass::default_cpu_type as resolver class in vl.c which were confusing part of cpu_parse_cpu_model(). Also with new parse_cpu_model(), the last users of cpu_init() in null-machine.c and bsd/linux-user targets could be switched to cpu_create() API and cpu_init() API will be removed by follow up patch. With no longer users left remove MachineState::cpu_model field, new code should use MachineState::cpu_type instead and leave cpu_model parsing to generic code in vl.c. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com> [ehabkost: Fix bsd-user build error] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-16Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 13 Mar 2018 21:11:43 GMT # gpg: using RSA key 7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/bitmaps-pull-request: iotests: add dirty bitmap postcopy test iotests: add dirty bitmap migration test migration: add postcopy migration of dirty bitmaps migration: allow qmp command migrate-start-postcopy for any postcopy migration: add is_active_iterate handler migration/qemu-file: add qemu_put_counted_string() migration: include migrate_dirty_bitmaps in migrate_postcopy qapi: add dirty-bitmaps migration capability migration: introduce postcopy-only pending dirty-bitmap: add locked state block/dirty-bitmap: add _locked version of bdrv_reclaim_dirty_bitmap block/dirty-bitmap: fix locking in bdrv_reclaim_dirty_bitmap block/dirty-bitmap: add bdrv_dirty_bitmap_enable_successor() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-13migration: add postcopy migration of dirty bitmapsVladimir Sementsov-Ogievskiy
Postcopy migration of dirty bitmaps. Only named dirty bitmaps are migrated. If destination qemu is already containing a dirty bitmap with the same name as a migrated bitmap (for the same node), then, if their granularities are the same the migration will be done, otherwise the error will be generated. If destination qemu doesn't contain such bitmap it will be created. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 20180313180320.339796-12-vsementsov@virtuozzo.com [Changed '+' to '*' as per list discussion. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2018-03-12replay: push replay_mutex_lock up the call treeAlex Bennée
Now instead of using the replay_lock to guard the output of the log we now use it to protect the whole execution section. This replaces what the BQL used to do when it was held during TCG execution. We also introduce some rules for locking order - mainly that you cannot take the replay_mutex while holding the BQL. This leads to some slight sophistry during start-up and extending the replay_mutex_destroy function to unlock the mutex without checking for the BQL condition so it can be cleanly dropped in the non-replay case. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095248.1060.40374.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-03-12Polish the version strings containing the package versionThomas Huth
Since commit 67a1de0d195a there is no space anymore between the version number and the parentheses when running configure with --with-pkgversion=foo : $ qemu-system-s390x --version QEMU emulator version 2.11.50(foo) But the space is included when building without that option when building from a git checkout: $ qemu-system-s390x --version QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty) The same confusion exists with the "query-version" QMP command. Let's fix this by introducing a proper QEMU_FULL_VERSION definition that includes the space and parentheses, while the QEMU_PKGVERSION should just cleanly contain the package version string itself. Note that this also changes the behavior of the "query-version" QMP command (the space and parentheses are not included there anymore), but that's supposed to be OK since the strings there are not meant to be parsed by other tools. Fixes: 67a1de0d195a6185c39b436159c9ffc7720bf979 Buglink: https://bugs.launchpad.net/qemu/+bug/1673373 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12vl: export machine_init_donePeter Xu
We have that variable but not exported. Export that so modules can have a way to poke on whether machine init has finished. Meanwhile, set that up even before calling the notifiers, so that notifiers who may depend on this field will get a correct answer. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180306053320.15401-2-peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-08vl: introduce vm_shutdown()Stefan Hajnoczi
Commit 00d09fdbbae5f7864ce754913efc84c12fdf9f1a ("vl: pause vcpus before stopping iothreads") and commit dce8921b2baaf95974af8176406881872067adfa ("iothread: Stop threads before main() quits") tried to work around the fact that emulation was still active during termination by stopping iothreads. They suffer from race conditions: 1. virtio_scsi_handle_cmd_vq() racing with iothread_stop_all() hits the virtio_scsi_ctx_check() assertion failure because the BDS AioContext has been modified by iothread_stop_all(). 2. Guest vq kick racing with main loop termination leaves a readable ioeventfd that is handled by the next aio_poll() when external clients are enabled again, resulting in unwanted emulation activity. This patch obsoletes those commits by fully disabling emulation activity when vcpus are stopped. Use the new vm_shutdown() function instead of pause_all_vcpus() so that vm change state handlers are invoked too. Virtio devices will now stop their ioeventfds, preventing further emulation activity after vm_stop(). Note that vm_stop(RUN_STATE_SHUTDOWN) cannot be used because it emits a QMP STOP event that may affect existing clients. It is no longer necessary to call replay_disable_events() directly since vm_shutdown() does so already. Drop iothread_stop_all() since it is no longer used. Cc: Fam Zheng <famz@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20180307144205.20619-5-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-06balloon: Fix documentation of the --balloon parameter and deprecate itThomas Huth
There are two issues with the documentation of the --balloon parameter: First, "--balloon none" is simply doing nothing. Even if a machine had a balloon device by default, this option is not disabling anything, it is simply ignored. Thus let's simply drop this option from the documentation to avoid to confuse the users (but keep the code in vl.c for backward compatibility). Second, the documentation claims that "--balloon virtio" is the default mode, but this is not true anymore since commit 382f074371f7dc32a34. Since that commit, the option also has no real use case anymore, since you can simply use "--device virtio-balloon" nowadays instead. Thus to simplify our complex parameter zoo a little bit, let's deprecate the the parameter now and tell the user to use "--device virtio-balloon" instead. Fixes: 382f074371f7dc32a34c944c845b1698e83d8c36 Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1519796303-13257-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06Document --rtc-td-hack, --localtime and --startdate as deprecatedThomas Huth
These options have been marked in a comment in qemu-options.hx as deprecated in 2009 already (see commit 1ed2fc1fa35fadc0d6), but we never informed the users about these deprecations. Let's catch up on that omission now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1519138892-12836-1-git-send-email-thuth@redhat.com> [Fix messages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06scsi: Remove automatic creation of SCSI controllers with -drive if=scsiThomas Huth
Automatic creation of SCSI controllers for "-drive if=scsi" for x86 machines was quite a bad idea (see description of commit f778a82f0c179 for details). This is marked as deprecated since QEMU v2.9.0, and as far as I know, nobody complained that this is still urgently required anymore. Time to remove this now. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1519123357-13225-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06Remove the deprecated -tdf optionThomas Huth
It's been marked as deprecated since a very long time already, and the parameter is not doing anything useful anymore except for printing a warning, so it's now time to finally get rid of this option. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1519071820-4062-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-05Merge remote-tracking branch 'remotes/kraxel/tags/ui-20180305-pull-request' ↵Peter Maydell
into staging ui: build curses, gtk and sdl as modules. # gpg: Signature made Mon 05 Mar 2018 08:48:24 GMT # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20180305-pull-request: ui/sdl: build as module audio: rename CONFIG_* to CONFIG_AUDIO_* ui/curses: build as module ui/gtk: build as module configure: opengl doesn't depend on x11 configure: add X11 vars to config-host.mak console: add ui module loading support console: add and use qemu_display_find_default egl-headless: switch over to new display registry curses: switch over to new display registry cocoa: switch over to new display registry sdl: switch over to new display registry console: add qemu display registry, add gtk Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 05 Mar 2018 03:06:59 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap: setting error appropriately when calling net_init_tap_one() hw/net: Remove unnecessary header includes net: Add a new convenience option "--nic" to configure default/on-board NICs net: Remove the deprecated 'host_net_add' and 'host_net_remove' HMP commands net: Remove the deprecated way of dumping network packets net: Make net_client_init() static net: Only show vhost-user in the help text if CONFIG_POSIX is defined net: List available netdevs with "-netdev help" net: Move error reporting from net_init_client/netdev to the calling site Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-05console: add and use qemu_display_find_defaultGerd Hoffmann
Using the new display registry instead of #ifdefs in vl.c. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-7-kraxel@redhat.com
2018-03-05egl-headless: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-6-kraxel@redhat.com
2018-03-05curses: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-5-kraxel@redhat.com
2018-03-05cocoa: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-4-kraxel@redhat.com
2018-03-05sdl: switch over to new display registryGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-3-kraxel@redhat.com
2018-03-05console: add qemu display registry, add gtkGerd Hoffmann
Add a registry for user interfaces. Add qemu_display_init and qemu_display_early_init helper functions for display initialization. Hook up gtk ui as first user. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20180301100547.18962-2-kraxel@redhat.com
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 11:40:09 +0000