summaryrefslogtreecommitdiff
path: root/trace-events
AgeCommit message (Collapse)Author
2018-03-12trace: remove use of QEMU specific types from trace probesDaniel P. Berrangé
Any compound structs / unions / etc, should always be declared as 'void *' pointers, since it cannot be assumed that trace backends are able to resolve QEMU typedefs. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20180308155524.5082-2-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-02-19trace: avoid SystemTap "char const" warningsStefan Hajnoczi
SystemTap's dtrace(1) produces the following warning when it encounters "char const" instead of "const char": Warning: /usr/bin/dtrace:trace-dtrace-root.dtrace:66: syntax error near: probe flatview_destroy_rcu Warning: Proceeding as if --no-pyparsing was given. This is a limitation in current SystemTap releases. I have sent a patch upstream to accept "char const" since it is valid C: https://sourceware.org/ml/systemtap/2018-q1/msg00017.html In QEMU we still wish to avoid warnings in the current SystemTap release. It's simple enough to replace "char const" with "const char". I'm not changing the documentation or implementing checks to prevent this from occurring again in the future. The next release of SystemTap will hopefully resolve this issue. Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20180201162625.4276-1-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-01-16find_ram_offset: Add comments and tracingDr. David Alan Gilbert
Add some comments so I can understand the various nested loops. Add some tracing so I can see what they're doing. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180105170138.23357-2-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-18gdbstub: add tracingDoug Gale
Signed-off-by: Doug Gale <doug16k@gmail.com> Message-id: 20171203013037.31978-1-doug16k@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-09-22memory: trace FlatView creation and destructionPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-08-01trace-events: fix code style: %# -> 0x%Vladimir Sementsov-Ogievskiy
In trace format '#' flag of printf is forbidden. Fix it to '0x%'. This patch is created by the following: check that we have a problem > find . -name trace-events | xargs grep '%#' | wc -l 56 check that there are no cases with additional printf flags before '#' > find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l 0 check that there are no wrong usage of '#' and '0x' together > find . -name trace-events | xargs grep '0x%#' | wc -l 0 fix the problem > find . -name trace-events | xargs sed -i 's/%#/0x%/g' [Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep "%[-+ 0'I]+#" instead so the shell quoting is correct. --Stefan] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-17trace: [trivial] Statically enable all guest eventsLluís Vilanova
The existing optimizations makes it feasible to have them available on all builds. Some quick'n'dirty numbers with 400.perlbench (SPECcpu2006) on the train input (medium size - suns.pl) and the guest_mem_before event: * vanilla, statically disabled real 0m2,259s user 0m2,252s sys 0m0,004s * vanilla, statically enabled (overhead: 2.18x) real 0m4,921s user 0m4,912s sys 0m0,008s * multi-tb, statically disabled (overhead: 0.99x) [within noise range] real 0m2,228s user 0m2,216s sys 0m0,008s * multi-tb, statically enabled (overhead: 0.99x) [within noise range] real 0m2,229s user 0m2,224s sys 0m0,004s Now enabling all events when booting an ARM system that immediately shuts down (https://lists.gnu.org/archive/html/qemu-devel/2017-06/msg04085.html): * vanilla, statically disabled real 0m32,153s user 0m31,276s sys 0m0,108s * vanilla, statically enabled (overhead: 1.35x) real 0m43,507s user 0m42,680s sys 0m0,168s * multi-tb, statically disabled (overhead: 1.03x) real 0m32,993s user 0m32,516s sys 0m0,104s * multi-tb, statically enabled (overhead: 1.00x) [within noise range] real 0m32,110s user 0m31,176s sys 0m0,156s And finally enabling all events using Emilio's dbt-bench (where orig == vanilla, new == multi-tb): NBench score; higher is better 180 +-+--------+----------+----------+---------+----------+----------+----------+----------+----------+---------+----------+--------+-+ | | | *** $$$$%% orig | 160 +-+....................................*.*.$..$.%............................................................orig-enabled +-+ | * * $ $ % new | 140 +-+....................................*.*.$..$.%............................................................new-disabled.......+-+ | * * $ $ % | | * * $ $ % | 120 +-+....................................*.*.$..$.%...............................................................................+-+ | * * $ $ % | | * * $ $ % | 100 +-+....................................*.*.$..$.%.....$$$%%%....................................................................+-+ | * * $ $ % *** $ $ % *** $$$%% | 80 +-+....................................*.*.$..$.%.*.*.$.$..%.*.*.$.$.%..........................................................+-+ | * * $ $ % * * $ $ % * * $ $ % | | * * $ $ % * * $ $ % * * $ $ % | 60 +-+.........................***..$$$%%.*.*##..$.%.*.*.$.$..%.*.*.$.$.%..***.$$$%%...............................................+-+ | **** $$$%% * * $ $ % * * # $ % * *## $ % * * $ $ % * * $ $ % | | * * $ $ % * * $ $ % * * # $ % * * # $ % * *## $ % * * $ $ % | 40 +-+..............*..*.$.$.%.*.*..$.$.%.*.*.#..$.%.*.*.#.$..%.*.*.#.$.%..*.*.$.$.%...............................................+-+ | * * $ $ % * * $ $ % * * # $ % * * # $ % * * # $ % * *## $ % *** $$$%%% | 20 +-+....***.$$$%%.*..*##.$.%.*.*###.$.%.*.*.#..$.%.*.*.#.$..%.*.*.#.$.%..*.*.#.$.%..................................*.*.$.$..%...+-+ | * *## $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * *## $ % | | * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % * * # $ % ***###$$%% ***##$$$%% * * # $ % | 0 +-+----***##$$%%-****##$$%%-***###$$%%-***##$$$%%-***##$$%%%-***##$$%%--***##$$%%-****##$$%%-***###$$%%-***##$$$%%-***##$$%%%---+-+ NUMERIC SORTSTRING SORT BITFIEFP EMULATION ASSIGNMENT IDEA HUFFMAN FOURIER NEURLU DECOMPOSITION gmean png: http://imgur.com/a/8XG5S Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Emilio G. Cota <cota@braap.org> Message-id: 149915849243.6295.4484103824675839071.stgit@frigg.lan Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-15accel: move kvm related accelerator files into accel/Yang Zhong
move kvm related accelerator files into accel/ subdirectory, also create one stub subdirectory, which will include accelerator's stub files. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-5-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15tcg: move tcg backend files into accel/tcg/Yang Zhong
move tcg-runtime.c, translate-all.(ch) and translate-common.c into accel/tcg/ subdirectory and updated related trace-events file. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-4-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-15tcg: move tcg related files into accel/tcg/ subdirectoryYang Zhong
move cputlb.c, cpu-exec-common.c and cpu-exec.c related tcg exec file into accel/tcg/ subdirectory. Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <1496383606-18060-3-git-send-email-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-13monitor: resurrect handle_qmp_command trace eventStefan Hajnoczi
Commit 104fc3027960dd2aa9d310936a6cb201c60e1088 ("qmp: Drop duplicated QMP command object checks") removed the call to trace_handle_qmp_command() while eliminating code duplication. This patch brings the trace event back so QEMU-internal trace events can be correlated with the QMP commands that caused them. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170605104216.22429-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-13monitor: add handle_hmp_command trace eventStefan Hajnoczi
It is often useful to correlate QEMU-internal events with monitor commands that caused them. Trace the full HMP command being executed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170605104216.22429-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-06-06kvm: irqchip: trace changes on msi add/removePeter Xu
It'll be nice to know which virq belongs to which device/vector when adding msi routes, so adding two more parameters for the add trace. Meanwhile, releasing virq has no tracing before. Add one for it. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494309644-18743-2-git-send-email-peterx@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-02char: move char devices to chardev/Marc-André Lureau
Suggested by Paolo Bonzini during series review. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-25move xen-mapcache.c to hw/i386/xen/Anthony Xu
move xen-mapcache.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25move xen-hvm.c to hw/i386/xen/Anthony Xu
move xen-hvm.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-05qmp: Drop duplicated QMP command object checksMarkus Armbruster
qmp_check_input_obj() duplicates qmp_dispatch_check_obj(), except the latter screws up an error message. handle_qmp_command() runs first the former, then the latter via qmp_dispatch(), masking the screwup. qemu-ga also masks the screwup, because it also duplicates checks, just differently. qmp_check_input_obj() exists because handle_qmp_command() needs to examine the command before dispatching it. The previous commit got rid of this need, except for a tracepoint, and a bit of "id" code that relies on qdict not being null. Fix up the error message in qmp_dispatch_check_obj(), drop qmp_check_input_obj() and the tracepoint. Protect the "id" code with a conditional. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1488544368-30622-9-git-send-email-armbru@redhat.com>
2017-02-21block: move AioContext, QEMUTimer, main-loop to libqemuutilPaolo Bonzini
AioContext is fairly self contained, the only dependency is QEMUTimer but that in turn doesn't need anything else. So move them out of block-obj-y to avoid introducing a dependency from io/ to block-obj-y. main-loop and its dependency iohandler also need to be moved, because later in this series io/ will call iohandler_get_aio_context. [Changed copyright "the QEMU team" to "other QEMU contributors" as suggested by Daniel Berrange and agreed by Paolo. --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213135235.12274-2-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: clean up trace-events filesStefan Hajnoczi
There are a number of unused trace events that scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c" filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/ directory prefix. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170126171613.1399-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-31trace: move hw/xen events to correct subdirDaniel P. Berrange
The trace-events for a given source file should generally always live in the same directory as the source file. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20170125161417.31949-4-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16trace: Add event "guest_cpu_exit"Lluís Vilanova
Signals the hot-unplugging of a virtual (guest) CPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 148278748597.1404.10546320797997984932.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16trace-events: spelling fixMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20161212221759.28949-1-marcandre.lureau@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: self-tune polling timeStefan Hajnoczi
This patch is based on the algorithm for the kvm.ko halt_poll_ns parameter in Linux. The initial polling time is zero. If the event loop is woken up within the maximum polling time it means polling could be effective, so grow polling time. If the event loop is woken up beyond the maximum polling time it means polling is not effective, so shrink polling time. If the event loop makes progress within the current polling time then the sweet spot has been reached. This algorithm adjusts the polling time so it can adapt to variations in workloads. The goal is to reach the sweet spot while also recognizing when polling would hurt more than help. Two new trace events, poll_grow and poll_shrink, are added for observing polling time adjustment. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-13-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-03aio: add polling mode to AioContextStefan Hajnoczi
The AioContext event loop uses ppoll(2) or epoll_wait(2) to monitor file descriptors or until a timer expires. In cases like virtqueues, Linux AIO, and ThreadPool it is technically possible to wait for events via polling (i.e. continuously checking for events without blocking). Polling can be faster than blocking syscalls because file descriptors, the process scheduler, and system calls are bypassed. The main disadvantage to polling is that it increases CPU utilization. In classic polling configuration a full host CPU thread might run at 100% to respond to events as quickly as possible. This patch implements a timeout so we fall back to blocking syscalls if polling detects no activity. After the timeout no CPU cycles are wasted on polling until the next event loop iteration. The run_poll_handlers_begin() and run_poll_handlers_end() trace events are added to aid performance analysis and troubleshooting. If you need to know whether polling mode is being used, trace these events to find out. Note that the AioContext is now re-acquired before disabling notify_me in the non-polling case. This makes the code cleaner since notify_me was enabled outside the non-polling AioContext release region. This change is correct since it's safe to keep notify_me enabled longer (disabling is an optimization) but potentially causes unnecessary event_notifer_set() calls. I think the chance of performance regression is small here. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20161201192652.9509-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-31memory: Don't use memcpy for ram_device regionsAlex Williamson
With a vfio assigned device we lay down a base MemoryRegion registered as an IO region, giving us read & write accessors. If the region supports mmap, we lay down a higher priority sub-region MemoryRegion on top of the base layer initialized as a RAM device pointer to the mmap. Finally, if we have any quirks for the device (ie. address ranges that need additional virtualization support), we put another IO sub-region on top of the mmap MemoryRegion. When this is flattened, we now potentially have sub-page mmap MemoryRegions exposed which cannot be directly mapped through KVM. This is as expected, but a subtle detail of this is that we end up with two different access mechanisms through QEMU. If we disable the mmap MemoryRegion, we make use of the IO MemoryRegion and service accesses using pread and pwrite to the vfio device file descriptor. If the mmap MemoryRegion is enabled and results in one of these sub-page gaps, QEMU handles the access as RAM, using memcpy to the mmap. Using either pread/pwrite or the mmap directly should be correct, but using memcpy causes us problems. I expect that not only does memcpy not necessarily honor the original width and alignment in performing a copy, but it potentially also uses processor instructions not intended for MMIO spaces. It turns out that this has been a problem for Realtek NIC assignment, which has such a quirk that creates a sub-page mmap MemoryRegion access. To resolve this, we disable memory_access_is_direct() for ram_device regions since QEMU assumes that it can use memcpy for those regions. Instead we access through MemoryRegionOps, which replaces the memcpy with simple de-references of standard sizes to the host memory. With this patch we attempt to provide unrestricted access to the RAM device, allowing byte through qword access as well as unaligned access. The assumption here is that accesses initiated by the VM are driven by a device specific driver, which knows the device capabilities. If unaligned accesses are not supported by the device, we don't want them to work in a VM by performing multiple aligned accesses to compose the unaligned access. A down-side of this philosophy is that the xp command from the monitor attempts to use the largest available access weidth, unaware of the underlying device. Using memcpy had this same restriction, but at least now an operator can dump individual registers, even if blocks of device memory may result in access widths beyond the capabilities of a given device (RTL NICs only support up to dword). Reported-by: Thorsten Kohfeldt <thorsten.kohfeldt@gmx.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-12trace: Add missing execution mode of guest eventsLluís Vilanova
Add missing execution mode documentation for the 'guest_cpu_enter' and 'guest_cpu_reset' events. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147566900921.7708.656450813307396468.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-10-12trace: move colo trace events to net/ sub-directoryDaniel P. Berrange
The colo patch series added various trace events to the top level trace-events file, despite the files using them being in a sub-dir. commit 30656b097e9dd7978d3fe9416cb9f5a421a9e63e Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Date: Tue Sep 27 10:22:34 2016 +0800 filter-rewriter: rewrite tcp packet to keep secondary connection commit f4b618360e5a81b097e2e35d52011bec3c63af68 Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Date: Tue Sep 27 10:22:31 2016 +0800 colo-compare: add TCP, UDP, ICMP packet comparison We add TCP,UDP,ICMP packet comparison to replace IP packet comparison. This can increase the accuracy of the package comparison. Less checkpoint more efficiency. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com> commit 0682e15b19b2f41c0568142b42518b9471168597 Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Date: Tue Sep 27 10:22:30 2016 +0800 colo-compare: introduce packet comparison thread commit 59509ec16b7ee92b3f8261c554023aa1d3169317 Author: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Date: Tue Sep 27 10:22:27 2016 +0800 net/colo.c: add colo.c to define and handle packet This moves all events into net/trace-events where they were supposed to live. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1475588159-30598-2-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: Document the execution mode of guest eventsLluís Vilanova
Explicitly state in which execution mode (user, softmmu, all) are guest events available for tracing. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147456962135.11114.6146034359114598596.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: Add event "guest_cpu_reset"Lluís Vilanova
Signals the reset of the state a virtual (guest) CPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428971851.15111.8799439252178273840.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: Add event "guest_cpu_enter"Lluís Vilanova
Signals the hot-plugging of a new virtual (guest) CPU. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 147428971313.15111.18023030883528426840.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: move hw/virtio/virtio-balloon.c trace points into correct fileDaniel P. Berrange
The trace points for hw/virtio/virtio-balloon.c were mistakenly put in the top level trace-events file, instead of util/trace-events in commit 270ab88f7c1112389a02cee0e3e03b20fcc7547e Author: Daniel P. Berrange <berrange@redhat.com> Date: Thu Jun 16 09:39:57 2016 +0100 trace: split out trace events for hw/virtio/ directory Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1473872624-23285-5-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-28trace: move util/qemu-coroutine*.c trace points into correct fileDaniel P. Berrange
The trace points for util/qemu-coroutine*.c were mistakenly left in the top level trace-events file, instead of util/trace-events in commit 492bb2dd651e780c0723580880acbedb5661e5ad Author: Daniel P. Berrange <berrange@redhat.com> Date: Thu Jun 16 09:39:48 2016 +0100 trace: split out trace events for util/ directory Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1473872624-23285-3-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-27filter-rewriter: rewrite tcp packet to keep secondary connectionZhang Chen
We will rewrite tcp packet secondary received and sent. When colo guest is a tcp server. Firstly, client start a tcp handshake. the packet's seq=client_seq, ack=0,flag=SYN. COLO primary guest get this pkt and mirror(filter-mirror) to secondary guest, secondary get it use filter-redirector. Then,primary guest response pkt (seq=primary_seq,ack=client_seq+1,flag=ACK|SYN). secondary guest response pkt (seq=secondary_seq,ack=client_seq+1,flag=ACK|SYN). In here,we use filter-rewriter save the secondary_seq to it's tcp connection. Finally handshake,client send pkt (seq=client_seq+1,ack=primary_seq+1,flag=ACK). Here,filter-rewriter can get primary_seq, and rewrite ack from primary_seq+1 to secondary_seq+1, recalculate checksum. So the secondary tcp connection kept good. When we send/recv packet. client send pkt(seq=client_seq+1+data_len,ack=primary_seq+1,flag=ACK|PSH). filter-rewriter rewrite ack and send to secondary guest. primary guest response pkt (seq=primary_seq+1,ack=client_seq+1+data_len,flag=ACK) secondary guest response pkt (seq=secondary_seq+1,ack=client_seq+1+data_len,flag=ACK) we rewrite secondary guest seq from secondary_seq+1 to primary_seq+1. So tcp connection kept good. In code We use offset( = secondary_seq - primary_seq ) to rewrite seq or ack. handle_primary_tcp_pkt: tcp_pkt->th_ack += offset; handle_secondary_tcp_pkt: tcp_pkt->th_seq -= offset; Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: add TCP, UDP, ICMP packet comparisonZhang Chen
We add TCP,UDP,ICMP packet comparison to replace IP packet comparison. This can increase the accuracy of the package comparison. Less checkpoint more efficiency. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27colo-compare: introduce packet comparison threadZhang Chen
If primary packet is same with secondary packet, we will send primary packet and drop secondary packet, otherwise notify COLO frame to do checkpoint. If primary packet comes but secondary packet does not, after REGULAR_PACKET_CHECK_MS milliseconds we set the primary packet as old_packet,then do a checkpoint. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-27net/colo.c: add colo.c to define and handle packetZhang Chen
The net/colo.c is used by colo-compare and filter-rewriter. this can share common data structure like net packet, and other functions. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-19monitor: use qmp_dispatch()Marc-André Lureau
Replace the old manual dispatch and validation code by the generic one provided by qapi common code. Note that it is now possible to call the following commands that used to be disabled by compile-time conditionals: - dump-skeys - query-spice - rtc-reset-reinjection - query-gic-capabilities Their fallback functions return an appropriate "feature disabled" error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20160912091913.15831-16-marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-08-12xen: handle inbound migration of VMs without ioreq server pagesPaul Durrant
VMs created on older versions on Xen will not have been provisioned with pages to support creation of non-default ioreq servers. In this case the ioreq server API is not supported and QEMU's only option is to fall back to using the default ioreq server pages as it did prior to commit 3996e85c ("Xen: Use the ioreq-server API when available"). This patch therefore changes the code in xen_common.h to stop considering a failure of xc_hvm_create_ioreq_server() as a hard failure but simply as an indication that the guest is too old to support the ioreq server API. Instead a boolean is set to cause reversion to old behaviour such that the default ioreq server is then used. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
2016-07-21kvm-all: add trace events for kvm irqchip opsPeter Xu
These will help us monitoring irqchip route activities more easily. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-28trace: [*-user] Add events to trace guest syscalls in syscall emulation modeLluís Vilanova
Adds two events to trace syscalls in syscall emulation mode (*-user): * guest_user_syscall: Emitted before the syscall is emulated; contains the syscall number and arguments. * guest_user_syscall_ret: Emitted after the syscall is emulated; contains the syscall number and return value. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 146651712411.12388.10024905980452504938.stgit@fimbulvetr.bsc.es Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for linux-user/ directoryDaniel P. Berrange
Move all trace-events for files in the linux-user/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 1466066426-16657-41-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for qom/ directoryDaniel P. Berrange
Move all trace-events for files in the qom/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-40-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for target-ppc/ directoryDaniel P. Berrange
Move all trace-events for files in the target-ppc/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 1466066426-16657-39-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for target-s390x/ directoryDaniel P. Berrange
Move all trace-events for files in the target-s390x/ directory to their own file. [Added missing newline in target-s390x/trace-events as suggested by Cornelia Huck <cornelia.huck@de.ibm.com>. --Stefan] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1466066426-16657-38-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for target-sparc/ directoryDaniel P. Berrange
Move all trace-events for files in the target-sparc/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-37-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for net/ directoryDaniel P. Berrange
Move all trace-events for files in the net/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-36-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for audio/ directoryDaniel P. Berrange
Move all trace-events for files in the audio/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-35-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for ui/ directoryDaniel P. Berrange
Move all trace-events for files in the ui/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-34-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for hw/alpha/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/alpha/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-33-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 08:43:36 +0000