summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2019-02-11qcow2: list of bitmaps new test 242Andrey Shinkevich
A new test file 242 added to the qemu-iotests set. It checks the format of qcow2 specific information for the new added section that lists details of bitmaps. Signed-off-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com> Message-Id: <1549638368-530182-4-git-send-email-andrey.shinkevich@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> [eblake: pep8 compliance, avoid trailing blank line] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-02-11tests/vm: Be verbose while extracting compressed imagesPhilippe Mathieu-Daudé
Depending of the host hardware, copying and extracting VM images can take up to few minutes. Add verbosity to avoid the user to worry about VMs hanging. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190129175403.18017-2-philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08tests/vm: expose BUILD_TARGET, TARGET_LIST and EXTRA_CONFIGURE_OPTSAlex Bennée
Now the underlying basevm support passes these along we can expose some additional variables to our Makefile to allow more customised tweaking of the build. For example: make vm-build-freebsd TARGET_LIST=aarch64-softmmu \ EXTRA_CONFIGURE_OPTS="--disable-tools --disable-docs" \ BUILD_TARGET=check-softfloat Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-08tests/vm: add --build-target optionAlex Bennée
This allows us to invoke the build with a custom target (for the VMs that use the {target} format string specifier). Currently OpenBSD is still hardwired due to problems running check. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-08tests/vm: call make check directly for netbsd/freebsd/ubuntu.i386Alex Bennée
The "make check" target calls check-qtest which has the appropriate system binaries as dependencies so we shouldn't need to do two steps of make invocation. Doing it in two steps was a hangover from when our make check couldn't run tests in parallel. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-08tests/vm: move images to $HOME/.cache/qemu-vm/imagesGerd Hoffmann
It's easier to move around the images then, by replacing the subdirectory with a symlink. Allows to share the images between multiple qemu checkouts for example. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08tests: PEP8 cleanup of docker.py, mostly white spaceAlex Bennée
My editor keeps putting squiggly lines under a bunch of the python lines to remind me how non-PEP8 compliant it is. Clean that up so it's easier to spot new errors. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08tests: docker.py be even smarter with persistent binfmt_miscAlex Bennée
If we have a persistent mapping we don't need the QEMU binary copied into the container as the kernel has already opened the file and will pass the fd in. However the support libraries will still need to be there. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08tests: make docker.py check for persistent configsAlex Bennée
binfmt_misc configured with the "F" flag opens the interpreter at config time. This means it can use an already open file-descriptor to run QEMU so there is no point trying to copy the binary into a container. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08tests: make docker.py update use configured binfmt pathAlex Bennée
When copying a QEMU binary into a linux-user docker image we should check what the current configured binfmt_misc path is rather than just assuming "/usr/bin/qemu-bin". Obviously if the user changes the configuration afterwards they will break their images again. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-08docker: add debian-buster-arm64-crossAlex Bennée
We can't build QEMU with this but we can use this image to build newer arm64 testcases which need more up to date tools. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-02-05Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* cpu-exec fixes (Emilio, Laurent) * TCG bugfix in queue.h (Paolo) * high address load for linuxboot (Zhijian) * PVH support (Liam, Stefano) * misc i386 changes (Paolo, Robert, Doug) * configure tweak for openpty (Thomas) * elf2dmp port to Windows (Viktor) * initial improvements to Makefile infrastructure (Yang + GSoC 2013) # gpg: Signature made Tue 05 Feb 2019 17:34:42 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (76 commits) queue: fix QTAILQ_FOREACH_REVERSE_SAFE scsi-generic: Convert from DPRINTF() macro to trace events scsi-disk: Convert from DPRINTF() macro to trace events pc: Use hotplug_handler_(plug|unplug|unplug_request) i386: hvf: Fix smp boot hangs hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller hw/tricore/Makefile.objs: Create CONFIG_* for tricore hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc hw/moxie/Makefile.objs: Conditionally build moxie hw/hppa/Makefile.objs: Create CONFIG_* for hppa hw/cris/Makefile.objs: Create CONFIG_* for cris hw/alpha/Makefile.objs: Create CONFIG_* for alpha hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards hw/nios2/Makefile.objs: Conditionally build nios2 hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # qemu-deprecated.texi
2019-02-05tests/tcg/aarch64: Add pauth smoke testRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190201195404.30486-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-05docker: adjust Xen repository for CentOS 7Paolo Bonzini
The Xen repository is failing to install, pick the right name for the release package. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05configure: Add a proper check for openpty() in libutilThomas Huth
On Linux (and maybe some BSDs), we require libutil for the openpty() function. However, this library is not available on some other systems, so we currently use a fragile if-statement in the configure script to check whether we need the library or not. Unfortunately, we also hard-coded a "-lutil" in the tests/Makefile.include file, so this breaks the build on Solaris, for example (see buglink below). To fix the issue, add the "-lutil" to "libs_tools" in the configure script instead, then this gets properly propagated to the tests, too. And while we're at it, also replace the fragile if-statement in the confi- gure script with a proper link-check for the availability of this function. Buglink: https://bugs.launchpad.net/qemu/+bug/1777252 Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05vhost-user-test: reduce usage of global_qtestPaolo Bonzini
Whenever the code can run on multiple QTestStates, use them explicitly instead of global_qtest. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1543851204-41186-12-git-send-email-pbonzini@redhat.com>
2019-02-05vhost-user-test: skip if there is no memory at address 0Paolo Bonzini
The virt machine cannot run the vhost-user qtests because they hardcode the presence of memory at address 0. Report the tests as a skip so that they can be converted to use qgraph. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543851204-41186-11-git-send-email-pbonzini@redhat.com>
2019-02-05vhost-user-test: support VHOST_USER_PROTOCOL_F_CROSS_ENDIANPaolo Bonzini
This will be useful to run the qtest for ppc64 targets on (for example) x86_64 hosts. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1543851204-41186-10-git-send-email-pbonzini@redhat.com>
2019-02-05vhost-user-test: signal data_cond when s->rings changesPaolo Bonzini
This speeds up wait_for_rings_started, which currently is just waiting for the timeout before checking s->rings. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543851204-41186-8-git-send-email-pbonzini@redhat.com>
2019-02-05vhost-user-test: use g_cond_broadcastPaolo Bonzini
g_cond_signal is rarely the right thing to do, it works now because vhost-user-test only has two threads but it is not correct in general. Fix it before adding more calls. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1543851204-41186-7-git-send-email-pbonzini@redhat.com>
2019-02-04test-filter-mirror: pass UNIX domain socket through fdJason Wang
The tests tries to let qemu server mode to process the connection which turns out to be racy after commit 8258292e18c3 ("monitor: Remove "x-oob", offer capability "oob" unconditionally"). This is because the filter may try to mirror the packets before UNIX socket object is ready (connected was set to true) from the view of qemu. In this case the packet will be dropped silently. Fixing this by passing pre-connected socket created by socketpair() to qemu through fd. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Li Zhijian <lizhijian@cn.fujitsu.com> Cc: Peter Xu <peterx@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Zhang Chen <zhangckid@gmail.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Zhang Chen <zhangckid@gmail.com> Message-id: 20190130031427.13129-1-jasowang@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-04tests/docker/test-mingw and docs: Remove --with-sdlabi=2.0Thomas Huth
Patchew currently reports failures with the mingw docker test - this is due to --with-sdlabi=2.0 configure flag which does not exist anymore. Remove this remainder from the docker test and the docs now. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1549268743-18502-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - vmdk: Support for blockdev-create - block: Apply auto-read-only for ro-whitelist drivers - virtio-scsi: Fixes related to attaching/detaching iothreads - scsi-disk: Fixed erroneously detected multipath setup with multiple disks created with node-names. Added device_id property. - block: Fix hangs in synchronous APIs with iothreads - block: Fix invalidate_cache error path for parent activation - block-backend, mirror, qcow2, vpc, vdi, qemu-iotests: Minor fixes and code improvements # gpg: Signature made Fri 01 Feb 2019 15:23:10 GMT # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (27 commits) scsi-disk: Add device_id property scsi-disk: Don't use empty string as device id qtest.py: Wait for the result of qtest commands block: Fix invalidate_cache error path for parent activation iotests/236: fix transaction kwarg order iotests: Filter second BLOCK_JOB_ERROR from 229 virtio-scsi: Forbid devices with different iothreads sharing a blockdev scsi-disk: Acquire the AioContext in scsi_*_realize() virtio-scsi: Move BlockBackend back to the main AioContext on unplug block: Eliminate the S_1KiB, S_2KiB, ... macros block: Remove blk_attach_dev_legacy() / legacy_dev code block: Apply auto-read-only for ro-whitelist drivers uuid: Make qemu_uuid_bswap() take and return a QemuUUID block/vdi: Don't take address of fields in packed structs block/vpc: Don't take address of fields in packed structs vmdk: Reject excess extents in blockdev-create iotests: Add VMDK tests for blockdev-create iotests: Filter cid numbers in VMDK extent info vmdk: Implement .bdrv_co_create callback vmdk: Refactor vmdk_create_extent ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01tests/microbit-test: Add tests for nRF51 NVMCSteffen Görtz
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190201023357.22596-4-stefanha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-02-01iotests/236: fix transaction kwarg orderJohn Snow
It's not enough to order the kwargs for consistent QMP log output, we must also sort any sub-dictionaries in lists that appear as values. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01iotests: Filter second BLOCK_JOB_ERROR from 229Max Reitz
Without this filter, this test sometimes fails. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01virtio-scsi: Forbid devices with different iothreads sharing a blockdevAlberto Garcia
This patch forbids attaching a disk to a SCSI device if its using a different AioContext. Test case included. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01scsi-disk: Acquire the AioContext in scsi_*_realize()Alberto Garcia
This fixes a crash when attaching two disks with the same blockdev to a SCSI device that is using iothreads. Test case included. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01virtio-scsi: Move BlockBackend back to the main AioContext on unplugAlberto Garcia
This fixes a crash when attaching a disk to a SCSI device using iothreads, then detaching it and reattaching it again. Test case included. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01uuid: Make qemu_uuid_bswap() take and return a QemuUUIDPeter Maydell
Currently qemu_uuid_bswap() takes a pointer to the QemuUUID to be byte-swapped. This means it can't be used when the UUID to be swapped is in a packed member of a struct. It's also out of line with the general bswap*() functions we provide in bswap.h, which take the value to be swapped and return it. Make qemu_uuid_bswap() take a QemuUUID and return the swapped version. This fixes some clang warnings about taking the address of a packed struct member in block/vdi.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01vmdk: Reject excess extents in blockdev-createKevin Wolf
Clarify that the number of extents provided in BlockdevCreateOptionsVmdk must match the number of extents that will actually be used. Providing more extents will result in an error now. This requires adapting the test case to provide the right number of extents. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2019-02-01iotests: Add VMDK tests for blockdev-createKevin Wolf
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01iotests: Filter cid numbers in VMDK extent infoFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01iotests: Make 234 stableMax Reitz
This test waits for a MIGRATION event with status=completed on the source VM before querying the migration status on both source and destination. However, just because the source says migration has completed does not mean the destination thinks the same. Therefore, in some cases, the destination VM may still report "active" instead of "completed" when asked for its migration status. Fix this by enabling migration events on both VMs and waiting until both source and destination emit a status=completed MIGRATION event. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01block: Fix hangs in synchronous APIs with iothreadsKevin Wolf
In the block layer, synchronous APIs are often implemented by creating a coroutine that calls the asynchronous coroutine-based implementation and then waiting for completion with BDRV_POLL_WHILE(). For this to work with iothreads (more specifically, when the synchronous API is called in a thread that is not the home thread of the block device, so that the coroutine will run in a different thread), we must make sure to call aio_wait_kick() at the end of the operation. Many places are missing this, so that BDRV_POLL_WHILE() keeps hanging even if the condition has long become false. Note that bdrv_dec_in_flight() involves an aio_wait_kick() call. This corresponds to the BDRV_POLL_WHILE() in the drain functions, but it is generally not enough for most other operations because they haven't set the return value in the coroutine entry stub yet. To avoid race conditions there, we need to kick after setting the return value. The race window is small enough that the problem doesn't usually surface in the common path. However, it does surface and causes easily reproducible hangs if the operation can return early before even calling bdrv_inc/dec_in_flight, which many of them do (trivial error or no-op success paths). The bug in bdrv_truncate(), bdrv_check() and bdrv_invalidate_cache() is slightly different: These functions even neglected to schedule the coroutine in the home thread of the node. This avoids the hang, but is obviously wrong, too. Fix those to schedule the coroutine in the right AioContext in addition to adding aio_wait_kick() calls. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-01qemu-iotests: add test case for dmgyuchenlin
Recently, some bugs in dmg file have been fixed. To prevent reading dmg is broken someday in the future, add a simple test which ensures the conversion from dmg to raw should not hang or face any I/O error. Signed-off-by: yuchenlin <npes87184@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-02-01mirror: Block the source BlockDriverState in mirror_start_job()Alberto Garcia
The mirror_start_job() function used for the commit-active job blocks the source, target and all intermediate nodes for the duration of the job. target <- intermediate <- source Since 4ef85a9c2339 this function creates a dummy mirror_top_bs that goes on top of the source node, and it is this dummy node that gets blocked instead. The source node is never blocked or added to the job's list of nodes. target <- intermediate <- source <- mirror_top At the moment I don't think it is possible to exploit this problem because any additional job on 'source' would either be forbidden for other reasons or it would need to involve an additional node that is blocked, causing an error. This can be seen in the error messages, however, because they never refer to the source node being blocked: $ qemu-img create -f qcow2 hd0.qcow2 1M $ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2 $ qemu-io -c 'write 0 1M' hd0.qcow2 $ $QEMU -drive if=none,file=hd1.qcow2,node-name=hd1 { "execute": "qmp_capabilities" } { "execute": "block-commit", "arguments": {"device": "hd1", "speed": 256}} { "execute": "block-stream", "arguments": {"device": "hd1"}} { "error": {"class": "GenericError", "desc": "Node 'hd0' is busy: block device is in use by block job: commit"}} After this patch the error message refers to 'hd1', as it should. The expected output of iotest 141 also needs to be updated for the same reason. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-01-31iotests: Allow 147 to be run concurrentlyMax Reitz
To do this, we need to allow creating the NBD server on various ports instead of a single one (which may not even work if you run just one instance, because something entirely else might be using that port). So we just pick a random port in [32768, 32768 + 1024) and try to create a server there. If that fails, we just retry until something sticks. For the IPv6 test, we need a different range, though (just above that one). This is because "localhost" resolves to both 127.0.0.1 and ::1. This means that if you bind to it, it will bind to both, if possible, or just one if the other is already in use. Therefore, if the IPv6 test has already taken [::1]:some_port and we then try to take localhost:some_port, that will work -- only the second server will be bound to 127.0.0.1:some_port alone and not [::1]:some_port in addition. So we have two different servers on the same port, one for IPv4 and one for IPv6. But when we then try to connect to the server through localhost:some_port, we will always end up at the IPv6 one (as long as it is up), and this may not be the one we want. Thus, we must make sure not to create an IPv6-only NBD server on the same port as a normal "dual-stack" NBD server -- which is done by using distinct port ranges, as explained above. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20181221234750.23577-4-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31iotests: Bind qemu-nbd to localhost in 147Max Reitz
By default, qemu-nbd binds to 0.0.0.0. However, we then proceed to connect to "localhost". Usually, this works out fine; but if this test is run concurrently, some other test function may have bound a different server to ::1 (on the same port -- you can bind different serves to the same port, as long as one is on IPv4 and the other on IPv6). So running qemu-nbd works, it can bind to 0.0.0.0:NBD_PORT. But potentially a concurrent test has successfully taken [::1]:NBD_PORT. In this case, trying to connect to "localhost" will lead us to the IPv6 instance, where we do not want to end up. Fix this by just binding to "localhost". This will make qemu-nbd error out immediately and not give us cryptic errors later. (Also, it will allow us to just try a different port as of a future patch.) Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20181221234750.23577-3-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-31iotests.py: Add qemu_nbd_pipe()Max Reitz
In some cases, we may want to deal with qemu-nbd errors (e.g. by launching it in a different configuration until it no longer throws any). In that case, we do not want its output ending up in the test output. It may still be useful for handling the error, though, so add a new function that works basically like qemu_nbd(), only that it returns the qemu-nbd output instead of making it end up in the log. In contrast to qemu_img_pipe(), it does still return the exit code as well, though, because that is even more important for error handling. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20181221234750.23577-2-mreitz@redhat.com Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-29tests/microbit-test: Check nRF51 UART functionalityJulia Suvorova
Some functional tests for: Basic reception/transmittion Suspending INTEN* registers Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20190123120759.7162-4-jusual@mail.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29tests/microbit-test: Make test independent of global_qtestJulia Suvorova
Using of global_qtest is not required here. Let's replace functions like readl() with the corresponding qtest_* counterparts. Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190123120759.7162-3-jusual@mail.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29tests/libqtest: Introduce qtest_init_with_serial()Julia Suvorova
Run qtest with a socket that connects QEMU chardev and test code. Signed-off-by: Julia Suvorova <jusual@mail.ru> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20190123120759.7162-2-jusual@mail.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29tests/microbit-test: add TWI stub device testStefan Hajnoczi
This test verifies that we read back the expected I2C WHO_AM_I register values for the accelerometer/magnetometer. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190110094020.18354-3-stefanha@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-25Merge remote-tracking branch ↵Peter Maydell
'remotes/amarkovic/tags/mips-queue-january-25-2019' into staging MIPS queue for January 25, 2019 # gpg: Signature made Fri 25 Jan 2019 13:25:57 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-january-25-2019: docs/qemu-cpu-models: Add MIPS/nanoMIPS QEMU supported CPU models qemu-doc: Add nanoMIPS ISA information tests: tcg: mips: Remove old directories tests: tcg: mips: Add two new Makefiles tests: tcg: mips: Move source files to new locations MAINTAINERS: Update MIPS sections target/mips: Add I6500 core configuration target/mips: nanoMIPS: Fix branch handling disas: nanoMIPS: Amend DSP instructions related comments target/mips: Extend gen_scwp() functionality to support EVA target/mips: Correct the second argument type of cpu_supports_isa() target/mips: nanoMIPS: Rename macros for extracting 3-bit-coded GPR numbers target/mips: nanoMIPS: Remove an unused macro target/mips: nanoMIPS: Remove duplicate macro definitions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-25Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-01-24' into ↵Peter Maydell
staging QAPI patches for 2019-01-24 # gpg: Signature made Thu 24 Jan 2019 14:25:19 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2019-01-24: json: Fix % handling when not interpolating qmp: Add examples to qom list, get, and set commands qapi: Eliminate indirection through qmp_event_get_func_emit() qapi: Belatedly update docs for commit 9c2f56e9f9d Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-25Merge remote-tracking branch 'remotes/berrange/tags/qio-next-pull-request' ↵Peter Maydell
into staging Merge qio 2010/01/24 Fixes accidental deletion of VNC server UNIX listener socket # gpg: Signature made Thu 24 Jan 2019 12:24:43 GMT # gpg: using RSA key BE86EBB415104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" # Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF * remotes/berrange/tags/qio-next-pull-request: io: ensure UNIX client doesn't unlink server socket Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-24tests: tcg: mips: Remove old directoriesAleksandar Markovic
Remove old test directories. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24tests: tcg: mips: Add two new MakefilesAleksandar Markovic
Add Makefiles for two new direcitories. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-24tests: tcg: mips: Move source files to new locationsAleksandar Markovic
MIPS TCG test will be organized by ISAs and ASEs in future. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 19:05:40 +0000