summaryrefslogtreecommitdiff
path: root/tcg/tcg-op.h
AgeCommit message (Collapse)Author
2016-05-12tcg: Allow goto_tb to any target PC in user modeSergey Fedorov
In user mode, there's only a static address translation, TBs are always invalidated properly and direct jumps are reset when mapping change. Thus the destination address is always valid for direct jumps and there's no need to restrict it to the pages the TB resides in. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining safety checksSergey Fedorov
We don't take care of direct jumps when address mapping changes. Thus we must be sure to generate direct jumps so that they always keep valid even if address mapping changes. Luckily, we can only allow to execute a TB if it was generated from the pages which match with current mapping. Document tcg_gen_goto_tb() declaration and note the reason for destination PC limitations. Some targets with variable length instructions allow TB to straddle a page boundary. However, we make sure that both of TB pages match the current address mapping when looking up TBs. So it is safe to do direct jumps into the both pages. Correct the checks for some of those targets. Given that, we can safely patch a TB which spans two pages. Remove the unnecessary check in cpu_exec() and allow such TBs to be patched. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-03-01tcg: Move definition of type TCGvLluís Vilanova
The target-dependant type TCGv must be defined in "tcg/tcg.h" before including the tracing helper wrappers in "tcg/tcg-op.h". It also makes more sense to define it here, where other TCG types are defined too. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Message-id: 145641860129.30295.17554707227384022653.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-07tcg: Allow extra data to be attached to insn_startRichard Henderson
With an eye toward having this data replace the gen_opc_* arrays that each target collects in order to enable restore_state_from_tb. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Rename debug_insn_start to insn_startRichard Henderson
With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson
Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-24tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32Richard Henderson
Rather than allow arbitrary shift+trunc, only concern ourselves with low and high parts. This is all that was being used anyway. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Implement insert_op_beforeRichard Henderson
Rather reserving space in the op stream for optimization, let the optimizer add ops as necessary. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move some opcode generation functions out of lineRichard Henderson
Some of these functions are really quite large. We have a number of things that ought to be circularly dependent, but we duplicated code to break that chain for the inlines. This saved 25% of the code size of one of the translators I examined. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04TCG: Fix tcg_gen_extr_i64_tl for 32bitAlexander Graf
We expose a generic helper "tcg_gen_extr_i64_tl" for 64bit targets, but the same function for 32bit targets is a misnomer and refers to an invalid function name. Fix up the definition to point to the correct internal helper names instead. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Inline tcg_gen_helperNRichard Henderson
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Use helper-gen.h in tcg-op.hRichard Henderson
No need to open-code the setup of the builtin helpers. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg: Push tcg-runtime routines into exec/helper-*Richard Henderson
Rather than special casing them, use the standard mechanisms for tcg helper generation. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Make call address a constant parameterRichard Henderson
Avoid allocating a tcg temporary to hold the constant address, and instead place it directly into the op_call arguments. At the same time, convert to the newly introduced tcg_out_call backend function, rather than invoking tcg_out_op for the call. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Add INDEX_op_trunc_shr_i32Richard Henderson
Let the backend do something special for truncation. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-28tcg: Fix missed pointer size != TCG_TARGET_REG_BITS changesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Fix fallback from muls2_i64 to mulu2_i64Richard Henderson
Brown Bag sez, don't put the fallback code into the wrong function. Also, check for muluh_i64 and use tcg_gen_mulu2_i64 instead of raw ops. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use tcg_gen_mulu2_i32 in tcg_gen_muls2_i32Richard Henderson
Rather than hard-coding use of mulu2_i32, allow muluh_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson
And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg: Split rem requirement from div requirementRichard Henderson
There are several hosts with only a "div" insn. Remainder is computed manually from the quotient and inputs. We can do this generically. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-04-27tcg: fix deposit_i64 op on 32-bit targetsAurelien Jarno
On 32-bit TCG targets, when emulating deposit_i64 with a mov_i32 + deposit_i32, care should be taken to not overwrite the low part of the second argument before the deposit when it is the same the destination. This fixes the shld instruction in qemu-system-x86_64, which in turns fixes booting "system rescue CD version 2.8.0" on this target. Reported-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23tcg: Implement muls2 with mulu2Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Implement multiword addition helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Implement multiword multiply helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23tcg: Implement a 64-bit to 32-bit extraction helperRichard Henderson
We're going to have use for this shortly in implementing other helpers. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-29tcg: Add TCGV_IS_UNUSED_*Richard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opparam_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-28tcg: rework TCG helper flagsAurelien Jarno
The current helper flags, TCG_CALL_CONST and TCG_CALL_PURE might be confusing and doesn't provide enough granularity for some helpers (FP helpers for example). This patch changes them into the following helpers flags: - TCG_CALL_NO_READ_GLOBALS means that the helper does not read globals, either directly or via an exception. They will not be saved to their canonical location before calling the helper. - TCG_CALL_NO_WRITE_GLOBALS means that the helper does not modify any globals. They will only be saved to their canonical locations before calling helpers, but they won't be reloaded afterwise. - TCG_CALL_NO_SIDE_EFFECTS means that the call to the function is removed if the return value is not used. It provides convenience flags, to avoid helper definitions longer than 80 characters. It also provides compatibility flags, and updates the documentation. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17tcg: Optimize mulu2Richard Henderson
Like add2, do operand ordering, constant folding, and dead operand elimination. The latter happens about 15% of all mulu2 during an x86_64 bios boot. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-17tcg: Constant fold add2 and sub2Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-06tcg: Add TCG_COND_NEVER, TCG_COND_ALWAYSRichard Henderson
There are several cases that can be handled easier inside both translators and code generators if we have out-of-band values for conditions. It's easy enough to handle ALWAYS and NEVER in the natural way inside the tcg middle-end. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Streamline movcond_i64 using movcond_i32Richard Henderson
When movcond_i32 is available we can further reduce the generated op count from 12 to 6, and the generated code size on i686 from 88 to 74 bytes. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Streamline movcond_i64 using 32-bit arithmeticRichard Henderson
Avoiding 64-bit arithmetic (outside of the compare) reduces the generated op count from 15 to 12, and the generated code size on i686 from 105 to 88 bytes. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Sanity check goto_tb inputRichard Henderson
Checking that we don't try for idx != [01] is trivial. Checking that we don't issue more than one of any index requires a tad more data and some ifdefs protecting that new variable. Signed-off-by: Richard Henderson <rth@twiddle.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Sanity check deposit inputsRichard Henderson
Given these are constants, checking once here means everything after can assume they're correct. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Implement concat*_i64 with deposit_i64Richard Henderson
For tcg_gen_concat_i32_i64 we only use deposit if the host supports it. For tcg_gen_concat32_i64 even if the host does not, as we get identical code before and after. Note that this relies on the ANDI -> EXTU patch for the identity claim. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Emit XORI as NOT for appropriate constantsRichard Henderson
Note that xori_i64 failed to perform even the minimal optimizations promised by the README. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Optimize initial inputs for ori_i64Richard Henderson
Copy the same optimizations from ori_i32. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-26tcg: Emit ANDI as EXTU for appropriate constantsRichard Henderson
Note that andi_i64 failed to perform even the minimal optimizations promised by the README. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21tcg: Introduce movcondRichard Henderson
Implemented with setcond if the target does not provide the optional opcode. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-12-14tcg: make tcg_const_ptr actually accept a pointer argumentPeter Maydell
Make tcg_const_ptr() include a cast so that you can pass it a pointer. This allows us to drop the casts we had in all the places that use this macro. Acked-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-02tcg: Fix whitespace in tcg-op.h.Richard Henderson
Removing the only tabs in the file. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: malc <av1474@comtv.ru>
2011-11-02tcg: Fix regression in tcg_gen_deposit_i64.Richard Henderson
The error being caused by the failure to copy the other half of the input to the output after having narrowed the deposit operation. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: malc <av1474@comtv.ru>
2011-10-30tcg: Optimize some forms of deposit.Richard Henderson
If the deposit replaces the entire word, optimize to a move. If we're inserting to the top of the word, avoid the mask of arg2 as we'll be shifting out all of the garbage and shifting in zeros. If the host is 32-bit, reduce a 64-bit deposit to a 32-bit deposit when possible. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-01tcg-i386: Introduce limited deposit supportJan Kiszka
x86 cannot provide an optimized generic deposit implementation. But at least for a few special cases, namely for writing bits 0..7, 8..15, and 0..15, versions using only a single instruction are feasible. Introducing such limited support improves emulating 16-bit x86 code on x86, but also rarer cases where 32-bit or 64-bit code accesses bytes or words. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 23:40:45 +0000