summaryrefslogtreecommitdiff
path: root/tcg/arm
AgeCommit message (Collapse)Author
2016-07-12tcg: Clean up tcg-target.h header guardsMarkus Armbruster
These use guard symbols like TCG_TARGET_$target. scripts/clean-header-guards.pl doesn't like them because they don't match their file name (they should, to make guard collisions less likely). Clean them up: use guard symbol $target_TCG_TARGET_H for tcg/$target/tcg-target.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-05tcg: Optimize spills of constantsRichard Henderson
While we can store constants via constrants on INDEX_op_st_i32 et al, we weren't able to spill constants to backing store. Add a new backend interface, tcg_out_sti, which may store the constant (and is allowed to fail). Rearrange the temp_* helpers so that we only attempt to directly store a constant when the temp is becoming dead/free. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg: Clean up direct block chaining data fieldsSergey Fedorov
Briefly describe in a comment how direct block chaining is done. It should help in understanding of the following data fields. Rename some fields in TranslationBlock and TCGContext structures to better reflect their purpose (dropping excessive 'tb_' prefix in TranslationBlock but keeping it in TCGContext): tb_next_offset => jmp_reset_offset tb_jmp_offset => jmp_insn_offset tb_next => jmp_target_addr jmp_next => jmp_list_next jmp_first => jmp_list_first Avoid using a magic constant as an invalid offset which is used to indicate that there's no n-th jump generated. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-05-12tcg/arm: Make direct jump patching thread-safeSergey Fedorov
Ensure direct jump patching in ARM is atomic by using atomic_read()/atomic_set() for code patching. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-Id: <1461341333-19646-8-git-send-email-sergey.fedorov@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-04-21tcg: check for CONFIG_DEBUG_TCG instead of NDEBUGAurelien Jarno
Check for CONFIG_DEBUG_TCG instead of NDEBUG, drop now useless code. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-2-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-21tcg: use tcg_debug_assert instead of assert (fix performance regression)Aurelien Jarno
The TCG code is quite performance sensitive, but at the same time can also be quite tricky. That is why asserts that can be enabled with the --enable-debug-tcg configure option. This used to work the following way: | #include "config.h" | | ... | | #if !defined(CONFIG_DEBUG_TCG) && !defined(NDEBUG) | /* define it to suppress various consistency checks (faster) */ | #define NDEBUG | #endif | | ... | | #include <assert.h> Since commit 757e725b (tcg: Clean up includes) "config.h" as been replaced by "qemu/osdep.h" which itself includes <assert.h>. As a consequence the assertions are always enabled, even when using --disable-debug-tcg, causing a performance regression, especially on targets with many registers. For instance on qemu-system-ppc the speed difference is about 15%. tcg_debug_assert is controlled directly by CONFIG_DEBUG_TCG and already uses in some places. This patch replaces all the calls to assert into calss to tcg_debug_assert. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 1461228530-14852-1-git-send-email-aurelien@aurel32.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-23tcg: Remove unnecessary osdep.h includes from tcg-target.inc.cPeter Maydell
Commit 757e725b58c57d added a number of #include "qemu/osdep.h" files to the tcg-target.c files (as they were named at the time). These are unnecessary because these files are not standalone C files, and the tcg/tcg.c file which includes them will have already included osdep.h on their behalf. Remove the unneeded include directives. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-23tcg: Rename tcg-target.c to tcg-target.inc.cPeter Maydell
Rename the per-architecture tcg-target.c files to tcg-target.inc.c. This makes it clearer that they are not intended to be standalone C files, but are instead #included into another source file. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-01-29tcg: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-16-git-send-email-peter.maydell@linaro.org
2015-08-24linux-user: remove useless macros GUEST_BASE and RESERVED_VALaurent Vivier
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base and the macros GUEST_BASE and RESERVED_VA become useless: replace them by their values. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-09tcg: Mask TCGMemOp appropriately for indexingRichard Henderson
The addition of MO_AMASK means that places that used inverted masks need to be changed to use positive masks, and places that failed to mask the intended bits need updating. Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-06-03tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITSPaolo Bonzini
This will be used to size the TLB when more than 8 MMU modes are used by the target. Limitations come from the limited size of the immediate fields (which sometimes, as in the case of Aarch64, extend to instructions that shift the immediate). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1424436345-37924-2-git-send-email-pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-05-14tcg: Push merged memop+mmu_idx parameter to softmmu routinesRichard Henderson
The extra information is not yet used but it is now available. This requires minor changes through all of the tcg backends. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-05-14tcg: Merge memop and mmu_idx parameters to qemu_ld/stRichard Henderson
At the tcg opcode level, not at the tcg-op.h generator level. This requires minor changes through all of the tcg backends, but none of the cpu translators. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-13tcg: Change generator-side labels to a pointerRichard Henderson
This is less about improved type checking than enabling a subsequent change to the representation of labels. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Tested-by: Claudio Fontana <claudio.fontana@huawei.com> Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Stefan Weil <sw@weilnetz.de> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-06-04tcg: Remove TCG_TARGET_HAS_new_ldstRichard Henderson
Since all backends have been converted, remove the compatibility code. Acked-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-28tcg-arm: Make debug_frame constRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg: Remove unreachable code in tcg_out_op and op_defsRichard Henderson
The INDEX_op_call case has just been obsoleted; the mov and movi cases have not been reachable for years. Attempt to document this both in each tcg_out_op switch, and via TCG_OPF_NOT_PRESENT. Because of the TCG_OPF_NOT_PRESENT change, this must be done for all targets in a single commit. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-12tcg-arm: Define TCG_TARGET_INSN_UNIT_SIZERichard Henderson
And use tcg pointer differencing functions as appropriate. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Use HOST_WORDS_BIGENDIANRichard Henderson
Instead of rolling a local TCG_TARGET_WORDS_BIGENDIAN. Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Relax requirement for mulu2_i32 on 32-bit hostsRichard Henderson
Instead require either mulu2_i32 or muluh_i32. The code in tcg-op.h already supports looking for both. Previous incomplete conversion? Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Add TCGType parameter to tcg_target_const_matchRichard Henderson
Most 64-bit targets need to be able to ignore the high bits of a TCG_TYPE_I32 value. Suggested-by: Stuart Brady <sdb@zubnet.me.uk> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-04-18tcg: Fix warning (1 bit signed bitfield entry) and replace int by boolStefan Weil
Static code analyzers complain about signed bitfields with only a single bit. is_ld is used as a boolean value, so make it bool. ppc64 already used bool for the 2nd argument is_ld of the local function add_qemu_ldst_label. Modify all other TCG targets to do follow this example. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-27tcg-arm: Avoid ldrd/strd for user-only emulationRichard Henderson
The arm ldrd/strd insns must cause alignment traps, whereas at least for armv7 ldr/str must handle unaligned operations. While this is hardly the only problem facing user-only emu, this solves one problem for i386 on armv7 emulation. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-02-17tcg-arm: The shift count of op_rotl_i32 is in args[2] not args[1].Huw Davies
It's this that should be subtracted from 0x20 when converting to a right rotate. Cc: qemu-stable@nongnu.org Signed-off-by: Huw Davies <huw@codeweavers.com> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-30tcg-arm: Use qemu_getauxvalRichard Henderson
Allow host detection on linux systems without glibc 2.16 or later. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Improve GUEST_BASE qemu_ld/stRichard Henderson
If we pull the code to emit the actual load/store into a subroutine, we can share the reg+reg addressing mode code between softmmu and usermode. This lets us load GUEST_BASE into a temporary register rather than attempting to add it piece-wise to the address. Which lets us use movw+movt for armv7, rather than (up to) 4 adds. Code size for pre-armv7 stays the same. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Convert to new ldst opcodesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Tidy variable naming convention in qemu_ld/stRichard Henderson
s/addr_reg2/addrhi/ s/addr_reg/addrlo/ s/data_reg2/datahi/ s/data_reg/datalo/ Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Convert to le/be ldst helpersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-12tcg-arm: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add qemu_ld_st_i32/64Richard Henderson
Step two in the transition, adding the new ldst opcodes. Keep the old opcodes around until all backends support the new opcodes. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Add tcg-be-ldst.hRichard Henderson
Move TCGLabelQemuLdst and related stuff out of tcg.h. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Move the tlb addend load earlierRichard Henderson
There are free scheduling slots between the sequence of comparison instructions. This requires changing the register in use to avoid conflict with those compares. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Remove restriction on qemu_ld output registerRichard Henderson
The main intent of the patch is to allow the tlb addend register to be changed, without tying that change to the constraint. But the most common side-effect seems to be to enable usage of ldrd with the r0,r1 pair. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Return register containing tlb addendRichard Henderson
Preparatory to rescheduling the tlb load, and changing said register. Continues to use R1 for now. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Move load of tlb addend into tcg_out_tlb_readRichard Henderson
This allows us to make more intelligent decisions about the relative offsets of the tlb comparator and the addend, avoiding any need of writeback addressing. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Use QEMU_BUILD_BUG_ON to verify constraints on tlbRichard Henderson
One of the two constraints we already checked via #if, but the tlb offset distance was only checked at runtime. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Use strd for tcg_out_arg_reg64Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Rearrange slow-path qemu_ld/stRichard Henderson
Use the new helper_ret_*_mmu routines. Use a conditional call to arrange for a tail-call from the store path, and to load the return address for the helper for the load path. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-01tcg-arm: Use ldrd/strd for appropriate qemu_ld/st64Richard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02exec: Split softmmu_defs.hRichard Henderson
The _cmmu helpers can be moved to exec-all.h. The helpers that are used from TCG will shortly need access to tcg_target_long so move their declarations into tcg.h. This requires minor include adjustments to all TCG backends. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_out_ld/st offset to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change relocation offsets to intptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change flush_icache_range arguments to uintptr_tRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Add muluh and mulsh opcodesRichard Henderson
Use them in places where mulu2 and muls2 are used. Optimize mulx2 with dead low part to mulxh. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg-arm: Implement tcg_register_jitRichard Henderson
Allows unwinding past the code_gen_buffer. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg-arm: Use AT_PLATFORM to detect the host ISARichard Henderson
With this we can generate armv7 insns even when the OS compiles for a lower common denominator. The macros are arranged so that when we do compile for a given ISA, all of the runtime checks for that ISA are optimized away. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg-arm: Simplify logic in detecting the ARM ISA in useRichard Henderson
GCC 4.8 defines a handy __ARM_ARCH symbol that we can use, which will make us nicely forward compatible with ARMv8 AArch32. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-09tcg-arm: Rename use_armv5_instructions to use_armvt5_instructionsRichard Henderson
As it really controls the availability of a thumb interworking instruction on armv5t. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:34:10 +0000