summaryrefslogtreecommitdiff
path: root/target/openrisc
AgeCommit message (Collapse)Author
2019-01-30target/openrisc: Fix LGPL version numberThomas Huth
It's either "GNU *Library* General Public version 2" or "GNU Lesser General Public version *2.1*", but there was no "version 2.0" of the "Lesser" library. So assume that version 2.1 is meant here. Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1548252536-6242-3-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-31decodetree: Remove "insn" argument from trans_* expandersRichard Henderson
This allows trans_* expanders to be shared between decoders for 32 and 16-bit insns, by not tying the expander to the size of the insn that produced it. This change requires adjusting the two existing users to match. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-03target/openrisc: Fix writes to interrupt mask registerStafford Horne
The interrupt controller mask register (PICMR) allows writing any value to any of the 32 interrupt mask bits. Writing a 0 masks the interrupt writing a 1 unmasks (enables) the the interrupt. For some reason the old code was or'ing the write values to the PICMR meaning it was not possible to ever mask a interrupt once it was enabled. I have tested this by running linux 4.18 and my regular checks, I don't see any issues. Reported-by: Davidson Francis <davidsondfgl@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix delay slot exception flag to match specStafford Horne
The delay slot exception flag is only set on the SR register during exception. Previously it was being set on both the ESR and SR this caused QEMU to differ from the spec. The was apparent as the linux kernel had a bug where it could boot on QEMU but not on real hardware. The fixed logic now matches hardware. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03linux-user: Implement signals for openriscRichard Henderson
All of the existing code was boilerplate from elsewhere, and would crash the guest upon the first signal. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com> --- v2: Add a comment to the new definition of target_pt_regs. Install the signal mask into the ucontext. v3: Incorporate feedback from Laurent.
2018-07-03target/openrisc: Reorg tlb lookupRichard Henderson
While openrisc has a split i/d tlb, qemu does not. Perform a lookup on both i & d tlbs in parallel and put the composite rights into qemu's tlb. This avoids ping-ponging the qemu tlb between EXEC and READ. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Increase the TLB sizeRichard Henderson
The architecture supports 128 TLB entries. There is no reason not to provide all of them. In the process we need to fix a bug that failed to parameterize the configuration register that tells the operating system the number of entries. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com> --- v2: - Change VMState version.
2018-07-03target/openrisc: Stub out handle_mmu_fault for softmmuRichard Henderson
This hook is only used by CONFIG_USER_ONLY. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Use identical sizes for ITLB and DTLBRichard Henderson
The sizes are already the same, however, we can improve things if they are identical by design. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix cpu_mmu_indexRichard Henderson
The code in cpu_mmu_index does not properly honor SR_DME. This bug has workarounds elsewhere in that we flush the tlb more often than necessary, on the state changes that should be reflected in a change of mmu_index. Fixing this means that we can respect the mmu_index that is given to tlb_flush. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix tlb flushing in mtsprRichard Henderson
The previous code was confused, avoiding the flush of the old entry if the new entry is invalid. We need to flush the old page if the old entry is valid and the new page if the new entry is valid. This bug was masked by over-flushing elsewhere. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Reduce tlb to a single dimensionRichard Henderson
While we had defines for *_WAYS, we didn't define more than 1. Reduce the complexity by eliminating this unused dimension. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Merge mmu_helper.c into mmu.cRichard Henderson
With tlb_fill in mmu.c, we can simplify things further. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Remove indirect function calls for mmuRichard Henderson
There is no reason to use an indirect branch instead of simply testing the SR bits that control mmu state. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Merge tlb allocation into CPUOpenRISCStateRichard Henderson
There is no reason to allocate this separately. This was probably copied from target/mips which makes the same mistake. While doing so, move tlb into the clear-on-reset range. While not all of the TLB bits are guaranteed zero on reset, all of the valid bits are cleared, and the rest of the bits are unspecified. Therefore clearing the whole of the TLB is correct. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Form the spr index from tcgRichard Henderson
Rather than pass base+offset to the helper, pass the full index. In most cases the base is r0 and optimization yields a constant. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Exit the TB after l.mtsprRichard Henderson
A store to SR changes interrupt state, which should return to the main loop to recognize that state. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Split out is_userRichard Henderson
This allows us to limit the amount of ifdefs and isolate the test for usermode. Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Link more translation blocksRichard Henderson
Track direct jumps via dc->jmp_pc_imm. Use that in preference to jmp_pc when possible. Emit goto_tb in that case, and lookup_and_goto_tb otherwise. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix singlestep_enabledRichard Henderson
We failed to store to cpu_pc before raising the exception, which caused us to re-execute the same insn that we stepped. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Use exit_tb instead of CPU_INTERRUPT_EXITTBRichard Henderson
No need to use the interrupt mechanisms when we can simply exit the tb directly. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Remove DISAS_JUMP & DISAS_TB_JUMPRichard Henderson
These values are unused. Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Log interruptsRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Add print_insn_or1kRichard Henderson
Rather than emit disassembly while translating, reuse the generated decoder to build a separate disassembler. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-02target/openrisc: Fix mtspr shadow gprsRichard Henderson
Missing break when this feature was added in 89e71e873d ("target/openrisc: implement shadow registers"). This was causing strange issues as we get writes into the translation block jump cache and other bits of state. Fixes: 89e71e873d ("target/openrisc: implement shadow registers") Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-06-04Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into ↵Peter Maydell
staging tcg-next queue # gpg: Signature made Sat 02 Jun 2018 00:12:42 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/tcg-next-pull-request: tcg: Pass tb and index to tcg_gen_exit_tb separately Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14target/openrisc: Merge disas_openrisc_insnRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_floatRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_compiRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_compRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_MRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_logicRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_macRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_calcRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert remainder of dec_misc insnsRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert memory insnsRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert branch insnsRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Start conversion to decodetree.pyRichard Henderson
Begin with the 0x08 major opcode, the system instructions. Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target-openrisc: Write back result before FPE exceptionRichard Henderson
The architecture manual is unclear about this, but the or1ksim does writeback before the exception. This requires splitting the helpers in half, with the exception raised by the second. Acked-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2018-05-09target/openrisc: convert to TranslatorOpsEmilio G. Cota
Notes: - Changed the num_insns test in insn_start to check for dc->base.num_insns > 1, since when tb_start is first called in a TB, base.num_insns is already set to 1. - Removed DISAS_NEXT from the switch in tb_stop; use DISAS_TOO_MANY instead. - Added an assert_not_reached on tb_stop for DISAS_NEXT and the default case. - Merged the two separate log_target_disas calls into the disas_log op. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-09target/openrisc: convert to DisasContextBaseEmilio G. Cota
While at it, set is_jmp to DISAS_NORETURN when generating an exception. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-04-11icount: fix cpu_restore_state_from_tb for non-tb-exit casesPavel Dovgalyuk
In icount mode, instructions that access io memory spaces in the middle of the translation block invoke TB recompilation. After recompilation, such instructions become last in the TB and are allowed to access io memory spaces. When the code includes instruction like i386 'xchg eax, 0xffffd080' which accesses APIC, QEMU goes into an infinite loop of the recompilation. This instruction includes two memory accesses - one read and one write. After the first access, APIC calls cpu_report_tpr_access, which restores the CPU state to get the current eip. But cpu_restore_state_from_tb resets the cpu->can_do_io flag which makes the second memory access invalid. Therefore the second memory access causes a recompilation of the block. Then these operations repeat again and again. This patch moves resetting cpu->can_do_io flag from cpu_restore_state_from_tb to cpu_loop_exit* functions. It also adds a parameter for cpu_restore_state which controls restoring icount. There is no need to restore icount when we only query CPU state without breaking the TB. Restoring it in such cases leads to the incorrect flow of the virtual time. In most cases new parameter is true (icount should be recalculated). But there are two cases in i386 and openrisc when the CPU state is only queried without the need to break the TB. This patch fixes both of these cases. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180409091320.12504.35329.stgit@pasha-VirtualBox> [rth: Make can_do_io setting unconditional; move from cpu_exec; make cpu_loop_exit_{noexc,restore} call cpu_loop_exit.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-19cpu: get rid of unused cpu_init() definesIgor Mammedov
cpu_init(cpu_model) were replaced by cpu_create(cpu_type) so no users are left, remove it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc) Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1518000027-274608-6-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-19cpu: add CPU_RESOLVING_TYPE macroIgor Mammedov
it will be used for providing to cpu name resolving class for parsing cpu model for system and user emulation code. Along with change add target to null-machine tests, so that when switch to CPU_RESOLVING_TYPE happens, it would ensure that null-machine usecase still works. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> (m68k) Acked-by: David Gibson <david@gibson.dropbear.id.au> (ppc) Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> (tricore) Message-Id: <1518000027-274608-4-git-send-email-imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: Added macro to riscv too] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-02-21target/*/cpu.h: remove softfloat.hAlex Bennée
As cpu.h is another typically widely included file which doesn't need full access to the softfloat API we can remove the includes from here as well. Where they do need types it's typically for float_status and the rounding modes so we move that to softfloat-types.h as well. As a result of not having softfloat in every cpu.h call we now need to add it to various helpers that do need the full softfloat.h definitions. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [For PPC parts] Acked-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-05qdev: use device_class_set_parent_realize/unrealize/reset()Philippe Mathieu-Daudé
changes generated using the following Coccinelle patch: @@ type DeviceParentClass; DeviceParentClass *pc; DeviceClass *dc; identifier parent_fn; identifier child_fn; @@ ( +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->realize; ... -dc->realize = child_fn; | +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->unrealize; ... -dc->unrealize = child_fn; | +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->reset; ... -dc->reset = child_fn; ) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180114020412.26160-4-f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-25accel/tcg: add size paremeter in tlb_fill()Laurent Vivier
The MC68040 MMU provides the size of the access that triggers the page fault. This size is set in the Special Status Word which is written in the stack frame of the access fault exception. So we need the size in m68k_cpu_unassigned_access() and m68k_cpu_handle_mmu_fault(). To be able to do that, this patch modifies the prototype of handle_mmu_fault handler, tlb_fill() and probe_write(). do_unassigned_access() already includes a size parameter. This patch also updates handle_mmu_fault handlers and tlb_fill() of all targets (only parameter, no code change). Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180118193846.24953-2-laurent@vivier.eu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 17:53:02 +0000