summaryrefslogtreecommitdiff
path: root/target/openrisc
AgeCommit message (Collapse)Author
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10cpu: Remove CPU_COMMONRichard Henderson
This macro is now always empty, so remove it. This leaves the entire contents of CPUArchState under the control of the guest architecture. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce CPUNegativeOffsetStateRichard Henderson
Nothing in there so far, but all of the plumbing done within the target ArchCPU state. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Introduce cpu_set_cpustate_pointersRichard Henderson
Consolidate some boilerplate from foo_cpu_initfn. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Move ENV_OFFSET to exec/gen-icount.hRichard Henderson
Now that we have ArchCPU, we can define this generically, in the one place that needs it. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10target/openrisc: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace openrisc_env_get_cpu with env_archcpu. The combination CPU(openrisc_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Replace ENV_GET_CPU with env_cpuRichard Henderson
Now that we have both ArchCPU and CPUArchState, we can define this generically instead of via macro in each target's cpu.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define ArchCPURichard Henderson
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10cpu: Define CPUArchState with typedefRichard Henderson
For all targets, do this just before including exec/cpu-all.h. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-10tcg: Split out target/arch/cpu-param.hRichard Henderson
For all targets, into this new file move TARGET_LONG_BITS, TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS, TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES. Include this new file from exec/cpu-defs.h. This now removes the somewhat odd requirement that target/arch/cpu.h defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the bulk of the includes within target/arch/cpu.h to the top. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10tcg: Use CPUClass::tlb_fill in cputlb.cRichard Henderson
We can now use the CPUClass hook instead of a named function. Create a static tlb_fill function to avoid other changes within cputlb.c. This also isolates the asserts within. Remove the named tlb_fill function from all of the targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-10target/openrisc: Convert to CPUClass::tlb_fillRichard Henderson
Cc: Stafford Horne <shorne@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-08target/openrisc: Fix LGPL information in the file headersThomas Huth
It's either "GNU *Library* General Public License version 2" or "GNU Lesser General Public License version *2.1*", but there was no "version 2.0" of the "Lesser" license. So assume that version 2.1 is meant here. Acked-by: Stafford Horne <shorne@gmail.com> Message-Id: <1550073577-4248-1-git-send-email-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-04-24tcg: Hoist max_insns computation to tb_gen_codeRichard Henderson
In order to handle TB's that translate to too much code, we need to place the control of the length of the translation in the hands of the code gen master loop. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-18disas: Rename include/disas/bfd.h back to include/disas/dis-asm.hMarkus Armbruster
Commit dc99065b5f9 (v0.1.0) added dis-asm.h from binutils. Commit 43d4145a986 (v0.1.5) inlined bfd.h into dis-asm.h to remove the dependency on binutils. Commit 76cad71136b (v1.4.0) moved dis-asm.h to include/disas/bfd.h. The new name is confusing when you try to match against (pre GPLv3+) binutils. Rename it back. Keep it in the same directory, of course. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-17-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-18qom/cpu: Simplify how CPUClass:cpu_dump_state() printsMarkus Armbruster
CPUClass method dump_statistics() takes an fprintf()-like callback and a FILE * to pass to it. Most callers pass fprintf() and stderr. log_cpu_state() passes fprintf() and qemu_log_file. hmp_info_registers() passes monitor_fprintf() and the current monitor cast to FILE *. monitor_fprintf() casts it right back, and is otherwise identical to monitor_printf(). The callback gets passed around a lot, which is tiresome. The type-punning around monitor_fprintf() is ugly. Drop the callback, and call qemu_fprintf() instead. Also gets rid of the type-punning, since qemu_fprintf() takes NULL instead of the current monitor cast to FILE *. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417191805.28198-15-armbru@redhat.com>
2019-04-18target: Simplify how the TARGET_cpu_list() printMarkus Armbruster
The various TARGET_cpu_list() take an fprintf()-like callback and a FILE * to pass to it. Their callers (vl.c's main() via list_cpus(), bsd-user/main.c's main(), linux-user/main.c's main()) all pass fprintf() and stdout. Thus, the flexibility provided by the (rather tiresome) indirection isn't actually used. Drop the callback, and call qemu_printf() instead. Calling printf() would also work, but would make the code unsuitable for monitor context without making it simpler. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190417191805.28198-10-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-01-30target/openrisc: Fix LGPL version numberThomas Huth
It's either "GNU *Library* General Public version 2" or "GNU Lesser General Public version *2.1*", but there was no "version 2.0" of the "Lesser" library. So assume that version 2.1 is meant here. Cc: Stafford Horne <shorne@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1548252536-6242-3-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-31decodetree: Remove "insn" argument from trans_* expandersRichard Henderson
This allows trans_* expanders to be shared between decoders for 32 and 16-bit insns, by not tying the expander to the size of the insn that produced it. This change requires adjusting the two existing users to match. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-03target/openrisc: Fix writes to interrupt mask registerStafford Horne
The interrupt controller mask register (PICMR) allows writing any value to any of the 32 interrupt mask bits. Writing a 0 masks the interrupt writing a 1 unmasks (enables) the the interrupt. For some reason the old code was or'ing the write values to the PICMR meaning it was not possible to ever mask a interrupt once it was enabled. I have tested this by running linux 4.18 and my regular checks, I don't see any issues. Reported-by: Davidson Francis <davidsondfgl@gmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix delay slot exception flag to match specStafford Horne
The delay slot exception flag is only set on the SR register during exception. Previously it was being set on both the ESR and SR this caused QEMU to differ from the spec. The was apparent as the linux kernel had a bug where it could boot on QEMU but not on real hardware. The fixed logic now matches hardware. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03linux-user: Implement signals for openriscRichard Henderson
All of the existing code was boilerplate from elsewhere, and would crash the guest upon the first signal. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com> --- v2: Add a comment to the new definition of target_pt_regs. Install the signal mask into the ucontext. v3: Incorporate feedback from Laurent.
2018-07-03target/openrisc: Reorg tlb lookupRichard Henderson
While openrisc has a split i/d tlb, qemu does not. Perform a lookup on both i & d tlbs in parallel and put the composite rights into qemu's tlb. This avoids ping-ponging the qemu tlb between EXEC and READ. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Increase the TLB sizeRichard Henderson
The architecture supports 128 TLB entries. There is no reason not to provide all of them. In the process we need to fix a bug that failed to parameterize the configuration register that tells the operating system the number of entries. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com> --- v2: - Change VMState version.
2018-07-03target/openrisc: Stub out handle_mmu_fault for softmmuRichard Henderson
This hook is only used by CONFIG_USER_ONLY. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Use identical sizes for ITLB and DTLBRichard Henderson
The sizes are already the same, however, we can improve things if they are identical by design. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix cpu_mmu_indexRichard Henderson
The code in cpu_mmu_index does not properly honor SR_DME. This bug has workarounds elsewhere in that we flush the tlb more often than necessary, on the state changes that should be reflected in a change of mmu_index. Fixing this means that we can respect the mmu_index that is given to tlb_flush. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix tlb flushing in mtsprRichard Henderson
The previous code was confused, avoiding the flush of the old entry if the new entry is invalid. We need to flush the old page if the old entry is valid and the new page if the new entry is valid. This bug was masked by over-flushing elsewhere. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Reduce tlb to a single dimensionRichard Henderson
While we had defines for *_WAYS, we didn't define more than 1. Reduce the complexity by eliminating this unused dimension. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Merge mmu_helper.c into mmu.cRichard Henderson
With tlb_fill in mmu.c, we can simplify things further. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Remove indirect function calls for mmuRichard Henderson
There is no reason to use an indirect branch instead of simply testing the SR bits that control mmu state. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Merge tlb allocation into CPUOpenRISCStateRichard Henderson
There is no reason to allocate this separately. This was probably copied from target/mips which makes the same mistake. While doing so, move tlb into the clear-on-reset range. While not all of the TLB bits are guaranteed zero on reset, all of the valid bits are cleared, and the rest of the bits are unspecified. Therefore clearing the whole of the TLB is correct. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Form the spr index from tcgRichard Henderson
Rather than pass base+offset to the helper, pass the full index. In most cases the base is r0 and optimization yields a constant. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Exit the TB after l.mtsprRichard Henderson
A store to SR changes interrupt state, which should return to the main loop to recognize that state. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Split out is_userRichard Henderson
This allows us to limit the amount of ifdefs and isolate the test for usermode. Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Link more translation blocksRichard Henderson
Track direct jumps via dc->jmp_pc_imm. Use that in preference to jmp_pc when possible. Emit goto_tb in that case, and lookup_and_goto_tb otherwise. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Fix singlestep_enabledRichard Henderson
We failed to store to cpu_pc before raising the exception, which caused us to re-execute the same insn that we stepped. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Use exit_tb instead of CPU_INTERRUPT_EXITTBRichard Henderson
No need to use the interrupt mechanisms when we can simply exit the tb directly. Reviewed-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Remove DISAS_JUMP & DISAS_TB_JUMPRichard Henderson
These values are unused. Reviewed-by: Stafford Horne <shorne@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Log interruptsRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-03target/openrisc: Add print_insn_or1kRichard Henderson
Rather than emit disassembly while translating, reuse the generated decoder to build a separate disassembler. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-07-02target/openrisc: Fix mtspr shadow gprsRichard Henderson
Missing break when this feature was added in 89e71e873d ("target/openrisc: implement shadow registers"). This was causing strange issues as we get writes into the translation block jump cache and other bits of state. Fixes: 89e71e873d ("target/openrisc: implement shadow registers") Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2018-06-04Merge remote-tracking branch 'remotes/rth/tags/tcg-next-pull-request' into ↵Peter Maydell
staging tcg-next queue # gpg: Signature made Sat 02 Jun 2018 00:12:42 BST # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/tcg-next-pull-request: tcg: Pass tb and index to tcg_gen_exit_tb separately Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01tcg: Pass tb and index to tcg_gen_exit_tb separatelyRichard Henderson
Do the cast to uintptr_t within the helper, so that the compiler can type check the pointer argument. We can also do some more sanity checking of the index argument. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-06-01target: Do not include "exec/exec-all.h" if it is not necessaryPhilippe Mathieu-Daudé
Code change produced with: $ git grep '#include "exec/exec-all.h"' | \ cut -d: -f-1 | \ xargs egrep -L "(cpu_address_space_init|cpu_loop_|tlb_|tb_|GETPC|singlestep|TranslationBlock)" | \ xargs sed -i.bak '/#include "exec\/exec-all.h"/d' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-10-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-14target/openrisc: Merge disas_openrisc_insnRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_floatRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_compiRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-05-14target/openrisc: Convert dec_compRichard Henderson
Acked-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 02:32:12 +0000