| Age | Commit message (Collapse) | Author |
|---|
|
With the next patch, the memory API will complain if the
TARGET_PHYS_ADDR_SPACE_BITS gets dangerously close to an
overflow. s390x can handle up to 64 bit of physical address
space from its page tables, but we never use that much. Just
decrease the value.
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
similiar -> similar
recieve -> receive
transfered -> transferred
preperation -> preparation
Most changes are in comments, one modifies a parameter name in a function
prototype.
The spelling fixes were made using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
On s390 the disabled wait state indicates a state of attention.
For example Linux uses that state after a panic. Lets
put the system into panicked state.
An alternative implementation would be to state
disabled-wait <address> instead of pause in the action field.
(e.g. z/OS, z/VM and other classic OSes use the address of the
disabled wait to indicate an error code).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 6cf41156322e27e81a727b69f03728dbc225d5bb.1366945969.git.hutao@cn.fujitsu.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Make use of new kvm_s390_get_registers_partial() for kvm_handle_css_inst() and
handle_hypercall() since they only need registers from the partial set and they
are called quite frequently.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We want to avoid expensive register synchronization IOCTL's on the hot path so
a new kvm_s390_get_registers_partial() is introduced as a compliment to
kvm_arch_get_registers(). The new function is called on the hot path, and
kvm_arch_get_registers() is called when we need the complete runtime register
state.
kvm_arch_put_registers() is updated to only sync the partial runtime set when
we've only dirtied the partial runtime set. This is to avoid sending bad data
back to KVM if we've only partially synced the runtime register set.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Target s390x uses ad-hoc macro magic to guess if the compiler
supports the GCC extension __uint128_t. This patch uses the
the dedicated macro CONFIG_INT128 defined by configure instead.
This fixes compilation with the CIL source code analyzer, which
uses GCC as a preprocessor but does not support __uint128_t.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Minor fixes to documentation and code comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fallthough into abort = oops.
Cc: qemu-trivial@nongnu.org
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commit 259186a7 "cpu: Move halted and interrupt_request fields to CPUState"
seems to have missed one instance in target-s390x/kvm.c:
/home/cohuck/git/qemu/target-s390x/kvm.c: In function ‘kvm_arch_process_async_events’:
/home/cohuck/git/qemu/target-s390x/kvm.c:319: error: ‘CPUS390XState’ has no member named ‘halted’
/home/cohuck/git/qemu/target-s390x/kvm.c:320: warning: control reaches end of non-void function
make[1]: *** [target-s390x/kvm.o] Error 1
Let's just switch to cs->halted.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This removes a global per-target function and thus takes us one step
closer to compiling multiple targets into one executable.
It will also allow to override the interrupt handling for certain CPU
families.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Move it to qom/cpu.h to avoid issues with include order.
Change pc_acpi_smi_interrupt() opaque to X86CPU.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
We have to consider the m bit to find the real channel subsystem when
determining the last subchannel.
If we fail to take this into account, removal of a subchannel in
the middle of a big list of devices will stop device detection after
a reboot.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
There is no special code right now and the reset ioctl is done later
on in the the reset handler anyway. Lets simplify the cpu init.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The gen_icount_start/end functions are now somewhat misnamed since they
are useful for generic "start/end of TB" code, used for more than just
icount. Rename them to gen_tb_start/end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Introduce ENV_OFFSET macros which can be used in non-target-specific
code that needs to generate TCG instructions which reference CPUState
fields given the cpu_env register that TCG targets set up with a
pointer to the CPUArchState struct.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
It was never implemented.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The target-specific ENV_GET_CPU() macros have allowed us to navigate
from CPUArchState to CPUState. The reverse direction was not supported.
Avoid introducing CPU_GET_ENV() macros by initializing an untyped
pointer that is initialized in derived instance_init functions.
The field may not be called "env" due to it being poisoned.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Ensures that a QOM-created S390CPU is usable.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Introduce realizefn and set realized = true in cpu_s390x_init().
Defer CPU reset from initfn to realizefn.
Acked-by: Richard Henderson <rth@twiddle.net>
[AF: Invoke parent's realizefn]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
There are two ways to express an interruption subclass:
- As a bitmask, as used in cr6.
- As a number, as used in the I/O interruption word.
Unfortunately, we have treated to I/O interruption word as if it
contained the bitmask as well, which went unnoticed so far as
- (queued-for-next) kvm made the same mistake, and
- Linux guest kernels don't check the isc value in the I/O interruption
word for subchannel interrupts.
Make sure that we treat the I/O interruption word correctly.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
do_io_interrupt() would stop scanning further iscs if it found
an I/O interrupt it could inject. This might cause the pending
interrupt indication for I/O interrupts to be reset although there
might be queued I/O interrupts for subsequent iscs.
Fix this by reordering the logic: Inject the I/O interrupt immediately
and continue searching all iscs for queued interrupts.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
gcc with -Wextra complains about an ordered pointer comparison:
target-s390x/helper.c:660:27: warning:
ordered comparison of pointer with integer zero [-Wextra]
Obviously the index was missing in the code.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
As best I can tell, this is a false positive.
[aliguori@ccnode4 qemu-s390]$ make
CC s390x-softmmu/target-s390x/helper.o
/home/aliguori/git/qemu/target-s390x/helper.c: In function ‘do_interrupt’:
/home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
/home/aliguori/git/qemu/target-s390x/helper.c:620:20: note: ‘addr’ was declared here
/home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
/home/aliguori/git/qemu/target-s390x/helper.c:620:14: note: ‘mask’ was declared here
cc1: all warnings being treated as errors
make[1]: *** [target-s390x/helper.o] Error 1
make: *** [subdir-s390x-softmmu] Error 2
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Andreas Färber
# Via Alexander Graf
* agraf/s390-for-upstream:
target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()
target-s390x: Clean up cpu_inject_*() signatures
target-s390x: Fix debug output
target-s390x: Fix debug output (continued)
|
|
This prepares for moving the halted field to CPUState.
Most call sites can already supply S390CPU, for some env becomes unused.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Despite cautioning that S390CPU is needed for upcoming CPUState
refactorings, commit 5d69c547d947798cba92d836d06f6e017ba2b19d (s390:
I/O interrupt and machine check injection.) added functions
cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument,
claiming consistency with cpu_inject_ext().
This complicates making cpu_interrupt() take a CPUState even more and it
required to pass &cpu->env from some S390CPU-aware call sites already,
creating inconsistency elsewhere. Address that.
This also eliminates the need for CPUS390XState in s390_virtio_irq().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Commit 71e470886fb6092504503a5fe41092ace71c096c (target-s390x: fix
style) renamed the cpu_s390x_handle_mmu_fault() argument from _vaddr to
orig_vaddr. Update the debug output code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Since its introduction in d5a439645a5a70fed5431318c3bce9dc2caa950f
(s390x: helper functions for system emulation) the variable name was
raddr. Fix this.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
CPU_SAVE_VERSION was undefined, so "cpu_common" VMState and
cpu_{save,load}() were not registered. They were no-ops.
Therefore there is no backwards compatibility to keep, so we can mark
S390CPU as unmigratable at device level.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
|
|
Map the I/O interruption code before calling into css.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Trigger the code for our virtual css in case of instruction
intercepts for I/O instructions.
Handle the tsch exit for the subchannel-related part of tsch.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Provide a mechanism for qemu to provide fully virtual subchannels to
the guest.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Provide handlers for (most) channel I/O instructions.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
I/O interrupts are queued per isc. Only crw pending machine checks
are supported.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Basic channel I/O structures and helper function.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add s390_cpu_physical_memory_{map,unmap} with special handling
for the lowcore.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Create a lowcore mapping helper that includes a check for sufficient
length.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This will allow each architecture to define how the VCPU ID is set on
the KVM_CREATE_VCPU ioctl call.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Allow virtio machines to register for different diag500 function
codes and convert s390-virtio to use it.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Since commit "s390: Add CPU reset handler" the CPU's instance_init
registers a reset callback. Unregister that on instance_finalize.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
In one of the last commits we accidently got 3-space indentation into
the tree. Fix it up so it's 4 spaces wide.
Reported-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Add a CPU reset handler to have all CPUs in a PoP compliant
state.
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[agraf: move hw/hw.h into existing ifdef]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The function is only used in misc_helper.c, so move it to that file.
This reduces the size of debug executables (compiled without optimization)
because they get unused code and data for each compilation which includes
cpu.h.
Executables with optimization don't change their size.
ebcdic2ascii is currently unused and could be removed (not done here).
The array ascii2ebcdic must be accessed with an unsigned index, therefore
(int)ascii[i] was replaced by (uint8_t)ascii[i]. The old code would have
failed for a signed char less than 0. The current code only converts
"QEMU" and spaces to EBCDIC, so there is no problem today.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This enables qemu -cpu help to return a list of supported CPU models
on s390 and also to query for cpu definitions in the monitor.
Initially only cpu model = host is returned. This needs to be reworked
into a full-fledged CPU model handling later on.
This change is needed to allow libvirt exploiters (like OpenStack)
to specify a CPU model.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[agraf: fix s390x-linux-user, adjust header locations]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
IBMs s390 contributions were meant to to be gplv2 or later (since
we were contributing to qemu). Several of the s390 specific files
link to gpl code anyway, so lets clarify the licence statement for
new contributions for those files that we have touched multiple
times or will likely touch again.
This patch does not touch files that mostly deal with tcg.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Note that target-alpha accesses this field from TCG, now using a
negative offset. Therefore the field is placed last in CPUState.
Pass PowerPCCPU to [kvm]ppc_fixup_cpu() to facilitate this change.
Move common parts of mips cpu_state_reset() to mips_cpu_reset().
Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
[AF: Rebased onto ppc CPU subclasses and openpic changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
