summaryrefslogtreecommitdiff
path: root/target-ppc/helper.h
AgeCommit message (Collapse)Author
2013-04-26target-ppc: emulate cmpb instructionAurelien Jarno
Needed for Power ISA version 2.05 compliance. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26target-ppc: optimize fabs, fnabs, fnegAurelien Jarno
fabs, fnabs and fneg are just flipping the bit sign of an FP register, this can be implemented in TCG instead of using softfloat. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22target-ppc: Remove vestigial PowerPC 620 supportDavid Gibson
The PowerPC 620 was the very first 64-bit PowerPC implementation, but hardly anyone ever actually used the chips. qemu notionally supports the 620, but since we don't actually have code to implement the segment table, the support is broken (quite likely in other ways too). This patch, therefore, removes all remaining pieces of 620 support, to stop it cluttering up the platforms we actually care about. This includes removing support for the ASR register, used only on segment table based machines. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-23target-ppc: Use mul*2 in mulh* insnsRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-01PPC: Unify dcbzl code pathAlexander Graf
The bit that makes a dcbz instruction a dcbzl instruction was declared as reserved in ppc32 ISAs. However, hardware simply ignores the bit, making code valid if it simply invokes dcbzl instead of dcbz even on 750 and G4. Thus, mark the bit as unreserved so that we properly emulate a simple dcbz in case we're running on non-G5s. While at it, also refactor the code to check the 970 special case during runtime. This way we don't need to differenciate between a 970 dcbz and any other dcbz anymore. We also allow for future improvements to add e500mc dcbz handling. Reported-by: Amadeusz Sławiński <amade@asmblr.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07PPC: Bring EPR support closer to realityAlexander Graf
We already used to support the external proxy facility of FSL MPICs, but only implemented it halfway correctly. This patch adds support for * dynamic enablement of the EPR facility * interrupt acknowledgement only when the interrupt is delivered This way the implementation now is closer to real hardware. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-28target-ppc: rename helper flagsAurelien Jarno
Rename helper flags to the new ones. This is purely a mechanical change, it's possible to use better flags by looking at the helpers. Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-06-24PPC: BookE: Implement EPR SPRAlexander Graf
On the e500 series, accessing SPR_EPR magically turns into an access at that CPU's IACK register on the MPIC. Implement that logic to get kernels that make use of that feature work. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Move load and store helpers, switch to AREG0 free modeBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0 and rename op_helper.c (which only contains load and store helpers) to mem_helper.c. Remove AREG0 swapping in tlb_fill(). Switch to AREG0 free mode. Use cpu_ld{l,uw}_code in translation and interrupt handling, cpu_{ld,st}{l,uw}_data in loads and stores. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Avoid AREG0 for misc helpersBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Avoid AREG0 for timebase helpersBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Avoid AREG0 for MMU etc. helpersBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Avoid AREG0 for integer and vector helpersBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> [fix unwanted whitespace line in Makefile.target] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Avoid AREG0 for FPU and SPE helpersBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24ppc: Avoid AREG0 for exception helpersBlue Swirl
Add an explicit CPUPPCState parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: E500: Implement msgsndAlexander Graf
This patch implements the msgsnd instruction. It is part of the Embedded.Processor Control specification and allows one CPU to IPI another CPU without going through an interrupt controller. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: E500: Implement msgclrAlexander Graf
This patch implements the msgclr instruction. It is part of the Embedded.Processor Control specification and clears pending doorbell interrupts on the current CPU. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-02PPC: booke206: Implement tlbilxAlexander Graf
The PowerPC 2.06 BookE ISA defines an opcode called "tlbilx" which is used to flush TLB entries. It's the recommended way of flushing in virtualized environments. So far we got away without implementing it, but Linux for e500mc uses this instruction, so we better add it :). Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-03target-ppc: remove old CONFIG_SOFTFLOAT #ifdefAurelien Jarno
target-ppc has been switched to softfloat only long ago, but a few #ifdef CONFIG_SOFTFLOAT have been forgotten. Remove them. Cc: Alexander Graf <agraf@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-05-12PPC: Implement e500 (FSL) MMUAlexander Graf
Most of the code to support e500 style MMUs is already in place, but we're missing on some of the special TLB0-TLB1 handling code and slightly different TLB modification. This patch adds support for the FSL style MMU. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Correct ppc popcntb logic, implement popcntw and popcntdDavid Gibson
qemu already includes support for the popcntb instruction introduced in POWER5 (although it doesn't actually allow you to choose POWER5). However, the logic is slightly incorrect: it will generate results truncated to 32-bits when the CPU is in 32-bit mode. This is not normal for powerpc - generally arithmetic instructions on a 64-bit powerpc cpu will generate full 64 bit results, it's just that only the low 32 bits will be significant for condition codes. This patch corrects this nit, which actually simplifies the code slightly. In addition, this patch implements the popcntw and popcntd instructions added in POWER7, in preparation for allowing POWER7 as an emulated CPU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement missing parts of the logic for the POWER PURRDavid Gibson
The PURR (Processor Utilization Resource Register) is a register found on recent POWER CPUs. The guts of implementing it at least enough to get by are already present in qemu, however some of the helper functions needed to actually wire it up are missing. This patch adds the necessary glue, so that the PURR can be wired up when we implement newer POWER CPU targets which include it. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Implement PowerPC slbmfee and slbmfev instructionsDavid Gibson
For a 64-bit PowerPC target, qemu correctly implements translation through the segment lookaside buffer. Likewise it supports the slbmte instruction which is used to load entries into the SLB. However, it does not emulate the slbmfee and slbmfev instructions which read SLB entries back into registers. Because these are only occasionally used in guests (mostly for debugging) we get away with it. However, given the recent SLB cleanups, it becomes quite easy to implement these, and thereby allow, amongst other things, a guest Linux to use xmon's command to dump the SLB. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01Clean up PowerPC SLB handling codeDavid Gibson
Currently the SLB information when emulating a PowerPC 970 is storeed in a structure with the unhelpfully named fields 'tmp' and 'tmp64'. While the layout in these fields does match the description of the SLB in the architecture document, it is not convenient either for looking up the SLB, or for emulating the slbmte instruction. This patch, therefore, reorganizes the SLB entry structure to be divided in the the "ESID related" and "VSID related" fields as they are divided in instructions accessing the SLB. In addition to making the code smaller and more readable, this will make it easier to implement for the 1TB segments used in more recent PowerPC chips. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2010-07-13target-ppc: add vexptefp instructionAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-16tcg: Optionally sign-extend 32-bit arguments for 64-bit hosts.Richard Henderson
Some hosts (amd64, ia64) have an ABI that ignores the high bits of the 64-bit register when passing 32-bit arguments. Others require the value to be properly sign-extended for the type. I.e. "int32_t" must be sign-extended and "uint32_t" must be zero-extended to 64-bits. To effect this, extend the "sizemask" parameter to tcg_gen_callN to include the signedness of the type of each parameter. If the tcg target requires it, extend each 32-bit argument into a 64-bit temp and pass that to the function call. This ABI feature is required by sparc64, ppc64 and s390x. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-06target-ppc: change DCR helpers to target_long argumentsAurelien Jarno
The recent transition to always have the DCR helper functions take 32 bit values broke the PPC64 target, as target_long became 64 bits there. This patch changes DCR helpers to target_long arguments, and cast the values to 32 bit when needed. Fixes PPC64 build with --enable-debug-tcg Based on a patch from Alexander Graf <agraf@suse.de> Reported-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-21PPC: Make DCR uint32_tAlexander Graf
For what I know DCR is always 32 bits wide, so we should also use uint32_t to pass it along the stacks. This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making it compile without --disable-werror Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-04-16target-ppc: mark a few helpers TCG_CALL_CONST and/or TCG_CALL_PUREaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7129 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-09targe-ppc: optimize mfcr and mtcrfaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6793 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add vrsqrtefp instructionaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6574 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add vrefp instructionaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6573 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add vct{u,s}xs instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6572 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add vcmp{eq, ge, gt, b}fp{, .} instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6571 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add vmaddfp and vnmsubfp instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6570 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add v{add,sub}fp instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6569 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-09target-ppc: Add v{max,min}fp instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6568 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05target-ppc: change instruction name vrlogefp into vlogefpaurel32
Thanks to Nathan Froyd for noticing that. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6532 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05target-ppc: add vrlogefp instructionaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6519 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-04Add vcf{u,s}x instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6513 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-04Add vrfi{m,n,p,z} instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6512 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-03Make mtvscr use a helperaurel32
Do this so we can set float statuses once per mtvscr, rather than once per Altivec instruction. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6508 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add v{add, sub}{s, u}{b, h, w}s instructionsaurel32
Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6254 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add vspltis{b,h,w} instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6238 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add vs{l,r} instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6237 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-08Add vcmpequ{b, h, w} and vcmpgt{s, u}{b, h, w} instructionsaurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6236 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Add vsumsws, vsum2sws, and vsum4{sbs, shs,ubs} instructions.aurel32
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6189 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 11:35:26 +0000