summaryrefslogtreecommitdiff
path: root/target-mips/translate_init.c
AgeCommit message (Collapse)Author
2016-03-30target-mips: add MAAR, MAARI registerYongbok Kim
The MAAR register is a read/write register included in Release 5 of the architecture that defines the accessibility attributes of physical address regions. In particular, MAAR defines whether an instruction fetch or data load can speculatively access a memory region within the physical address bounds specified by MAAR. As QEMU doesn't do speculative access, hence this patch only provides ability to access the registers. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-30target-mips: enable CM GCR in MIPS64R6-generic CPULeon Alrae
Indicate that in the MIPS64R6-generic CPU the memory-mapped Global Configuration Register Space is implemented. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-03-23target-mips: indicate presence of IEEE 754-2008 FPU in R6/R5+MSA CPUsLeon Alrae
MIPS Release 6 and MIPS SIMD Architecture make it mandatory to have IEEE 754-2008 FPU which is indicated by CP1 FIR.HAS2008, FCSR.ABS2008 and FCSR.NAN2008 bits set to 1. In QEMU we still keep these bits cleared as there is no 2008-NaN support. However, this now causes problems preventing from running R6 Linux with the v4.5 kernel. Kernel refuses to execute 2008-NaN ELFs on a CPU whose FPU does not support 2008-NaN encoding: (...) VFS: Mounted root (ext4 filesystem) readonly on device 8:0. devtmpfs: mounted Freeing unused kernel memory: 256K (ffffffff806f0000 - ffffffff80730000) request_module: runaway loop modprobe binfmt-464c Starting init: /sbin/init exists but couldn't execute it (error -8) request_module: runaway loop modprobe binfmt-464c Starting init: /bin/sh exists but couldn't execute it (error -8) Kernel panic - not syncing: No working init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance. Therefore always indicate presence of 2008-NaN support in R6 as well as in R5+MSA CPUs, even though this feature is not yet supported by MIPS in QEMU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-26target-mips: implement R6 multi-threadingYongbok Kim
MIPS Release 6 provides multi-threading features which replace pre-R6 MT Module. CP0.Config3.MT is always 0 in R6, instead there is new CP0.Config5.VP (Virtual Processor) bit which indicates presence of multi-threading support which includes CP0.GlobalNumber register and DVP/EVP instructions. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-30target-mips: Set Config5.XNP for R6 coresYongbok Kim
Set Config5.XNP for R6 cores to indicate the extended LL/SC family of instructions NOT present. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-08-13target-mips: update mips32r5-generic into P5600Yongbok Kim
As full specification of P5600 is available, mips32r5-generic should be renamed to P5600 and corrected as its intention. Correct PRid and detail of configuration. Features which are not currently supported are described as FIXME. Fix Config.MM bit location Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: correct cache line sizes and LLAddr shift] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-15target-mips: fix MIPS64R6-generic configurationYongbok Kim
Fix core configuration for MIPS64R6-generic to make it as close as I6400. I6400 core has 48-bit of Virtual Address available (SEGBITS). MIPS SIMD Architecture is available. Rearrange order of bits to match the specification. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-26target-mips: add mips32r6-generic CPU definitionYongbok Kim
Define a new CPU definition supporting MIPS32 Release 6 ISA and microMIPS32 Release 6 ISA. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-12target-mips: enable XPA and LPA featuresLeon Alrae
Enable XPA in MIPS32R5-generic and LPA in MIPS64R6-generic. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: remove misleading comments in translate_init.cLeon Alrae
PABITS are not hardcoded to 36 bits and we do not model 59 PABITS (which is the architectural limit) in QEMU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-11target-mips: add ERETNC instruction and Config5.LLB bitLeon Alrae
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit that is set by execution of an LL instruction, and thus when placed between an LL and SC sequence, will never cause the SC to fail. Presence of ERETNC is denoted by the Config5.LLB. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-11target-mips: Misaligned memory accesses for R6Yongbok Kim
Release 6 requires misaligned memory access support for all ordinary memory access instructions (for example, LW/SW, LWC1/SWC1). However misaligned support is not provided for certain special memory accesses such as atomics (for example, LL/SC). Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: add Config5.FRE support allowing Status.FR=0 emulationLeon Alrae
This relatively small architectural feature adds the following: FIR.FREP: Read-only. If FREP=1, then Config5.FRE and Config5.UFE are available. Config5.FRE: When enabled all single-precision FP arithmetic instructions, LWC1/LWXC1/MTC1, SWC1/SWXC1/MFC1 cause a Reserved Instructions exception. Config5.UFE: Allows user to write/read Config5.FRE using CTC1/CFC1 instructions. Enable the feature in MIPS64R6-generic CPU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-03-11target-mips: add missing MSACSR and restore fp_status and hflagsLeon Alrae
Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore them in post_load() from the architectural registers. Float exception flags are not present in vmstate. Information they carry is used only by softfloat caller who translates them into MIPS FCSR.Cause, FCSR.Flags and then they are cleared. Therefore there is no need for saving them in vmstate. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-02-13target-mips: Make CP0.Status.CU1 read-only for the 5Kc and 5KEc processorsMaciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Fix formatting in `mips_defs'Maciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Enable vectored interrupt support for the 74Kf CPUMaciej W. Rozycki
Enable vectored interrupt support for the 74Kf CPU, reflecting hardware. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Add M14K and M14Kc MIPS32r2 microMIPS processorsMaciej W. Rozycki
Add the M14K and M14Kc processors from MIPS Technologies that are the original implementation of the microMIPS ISA. They are dual instruction set processors, implementing both the microMIPS and the standard MIPSr32 ISA. These processors correspond to the M4K and 4KEc CPUs respectively, except with support for the microMIPS instruction set added, support for the MCU ASE added and two extra interrupt lines, making a total of 8 hardware interrupts plus 2 software interrupts. The remaining parts of the microarchitecture, in particular the pipeline, stayed unchanged. The presence of the microMIPS ASE is is reflected in the configuration added. We currently have no support for the MCU ASE, including in particular the ACLR, ASET and IRET instructions in either encoding, and we have no support for the extra interrupt lines, including bits in CP0.Status and CP0.Cause registers, so these features are not marked, making our support diverge from real hardware. Signed-off-by: Sandra Loosemore <sandra@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Add 5KEc and 5KEf MIPS64r2 processorsMaciej W. Rozycki
Add the 5KEc and 5KEf processors from MIPS Technologies that are the original implementation of the MIPS64r2 ISA. Silicon for these processors has never been taped out and no soft cores were released even. They do exist though, a CP0.PRId value has been assigned and experimental RTLs produced at the time the MIPS64r2 ISA has been finalized. The settings introduced here faithfully reproduce that hardware. As far the implementation goes these processors are the same as the 5Kc and the 5Kf CPUs respectively, except implementing the MIPS64r2 rather than the original MIPS64 instruction set. There must have been some updates to the CP0 architecture as mandated by the ISA, such as the addition of the EBase register, although I am not sure about the exact details, no documentation has ever been produced for these processors. The remaining parts of the microarchitecture, in particular the pipeline, stayed unchanged. Or to put it another way, the difference between a 5K and a 5KE CPU corresponds to one between a 4K and a 4KE CPU, except for the 64-bit rather than 32-bit ISA. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07mips: Set the CP0.Config3.DSP and CP0.Config3.DSP2P bitsMaciej W. Rozycki
Set the CP0.Config3.DSP2P bit for the 74kf processor and both that bit and the CP0.Config3.DSP bit for the artificial mips32r5-generic and mips64dspr2 processors. They have the DSPr2 ASE enabled in `insn_flags' and CPUs that implement that ASE need to have both CP0.Config3.DSP and CP0.Config3.DSP2P set or software won't detect its presence. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: remove DSP flags from mips32r5-generic] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA support to mips32r5-genericYongbok Kim
add MSA support to mips32r5-generic core definition Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add msa_reset(), global msa registerYongbok Kim
add msa_reset() and global msa register (d type only) Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: enable features in MIPS64R6-generic CPULeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add TLBINV supportLeon Alrae
For Standard TLB configuration (Config.MT=1): TLBINV invalidates a set of TLB entries based on ASID. The virtual address is ignored in the entry match. TLB entries which have their G bit set to 1 are not modified. TLBINVF causes all entries to be invalidated. Single TLB entry can be marked as invalid on TLB entry write by having EntryHi.EHINV set to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: update PageGrain and m{t,f}c0 EntryLo{0,1}Leon Alrae
PageGrain needs rw bitmask which differs between MIPS architectures. In pre-R6 if RIXI is supported, PageGrain.XIE and PageGrain.RIE are writeable, whereas in R6 they are read-only 1. On MIPS64 mtc0 instruction left shifts bits 31:30 for MIPS32 backward compatiblity, therefore there are separate mtc0 and dmtc0 helpers. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14target-mips: define a new generic CPU supporting MIPS64 Release 6 ISALeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-03-27target-mips: Avoid shifting left into sign bitPeter Maydell
Add U suffix to various places where we shift a 1 left by 31, to avoid undefined behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-13exec: Change cpu_abort() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-10target-mips: add user-mode FR switch support for MIPS32r5Petar Jovanovic
Description of UFR feature: Required in MIPS32r5 if floating point is implemented and user-mode FR switching is supported. The UFR register allows user-mode to clear StatusFR by executing a CTC1 to UFR with GPR[0] as input, and read StatusFR by executing a CFC1 to UFR. helper_ctc1 has been extended with an additional parameter rt to check requirements for UFR feature. Definition of mips32r5-generic has been modified to include support for UFR. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config5Petar Jovanovic
Add CP0_Config5, define rw_bitmask and enable modifications. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config4Petar Jovanovic
Add CP0_Config4, define rw_bitmask. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add CPU definition for MIPS32R5Petar Jovanovic
Add mips32r5-generic among CPU definitions for MIPS. Define ISA_MIPS32R3 and ISA_MIPS32R5. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2013-08-03target-mips: fix 34Kf configuration for DSP ASEYongbok Kim
34Kf core does support DSP ASE. CP0_Config3 configuration for 34Kf and description are wrong. Please refer to MIPS32(R) 34Kf(TM) Processor Core Datasheet Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP processorsJia Liu
Add 74kf and mips64dspr2-generic-cpu model for test. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-09-06mips: Default to using one VPE and one TC.Edgar E. Iglesias
Boards can override the setup if needed. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-09-06mips: Enable VInt interrupt mode for the 34KfEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-05-08Fix typos in comments (interupt -> interrupt)Stefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-05-06Fix typo in code and commentsStefan Weil
Replace writeable -> writable Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-10-30target-xxx: Use fprintf_function (format checking)Stefan Weil
fprintf_function uses format checking with GCC_FMT_ATTR. Format errors were fixed in * target-i386/helper.c * target-mips/translate.c * target-ppc/translate.c Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31Remove unused constantHervé Poussineau
Remove unused constant MIPS_FCR0 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of fulong mini pc (CPU definition)Huacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-17target-mips: No MIPS16 support for 4Kc, 4KEc coresStefan Weil
Fix regression introduced by d19954f46dfc262612c30e9534e660e953049487. 4Kc and 4KEc don't support MIPS16. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-16target-mips: 4Kc, 4KEc cores do not support MIPS16Stefan Weil
4Kc, 4KEc cores do not support MIPS16, so not only the CP0_Config1 had to be fixed (see previous patch), but also MIPS16 instructions must not be executed. (Hint from Nathan Froyd, thanks). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: fix user-mode emulation startupNathan Froyd
Running programs with the MIPS user-mode emulator fails during dynamic loading, as floating-point instructions are not enabled in in env->hflags. Move the code for doing so from fpu_init to cpu_reset so the MIPS_HFLAG_{FPU,F64} setting doesn't get clobbered by cpu_reset setting env->hflags to MIPS_HFLAG_UM. The same end can be achieved by swapping the ordering of fpu_init and cpu_reset in cpu_mips_init, but it seemed better to consolidate the CONFIG_USER_ONLY code into a single location. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: set Config1.CA for MIPS16-aware CPUsNathan Froyd
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-22target-mips: make CP0_LLAddr register CPU dependentAurelien Jarno
Depending on the CPU, CP0_LLAddr is either read-only or read-write, and the returned value can be shifted by a variable amount of bits. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
2009-11-14mips: fix cpu_reset memory leakBlue Swirl
Remove cpu_mips_register() - move mmu_init(), fpu_init() and mvp_init() into cpu_mips_init() - move the other parts in cpu_mips_init() Reported-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 00:37:17 +0000