| Age | Commit message (Collapse) | Author |
|---|
|
The current default action of pausing a guest after a panic event
is received leaves the responsibility to resume guest execution to the
management layer. The reasons for this behavior are discussed here:
https://lore.kernel.org/qemu-devel/52148F88.5000509@redhat.com/
However, in instances like the case of older guests (Linux and
Windows) using a pvpanic device but missing support for the
PVPANIC_CRASHLOADED event, and Windows guests using the hv-crash
enlightenment, it is desirable to allow the guests to continue
running after sending a PVPANIC_PANICKED event. This allows such
guests to proceed to capture a crash dump and automatically reboot
without intervention of a management layer.
Add an option to avoid stopping a VM after a panic event is received,
by passing:
-action panic=none
in the command line arguments, or during runtime by using an upcoming
QMP command.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-3-git-send-email-alejandro.j.jimenez@oracle.com>
[Do not fix panic action in the variable, instead modify -no-shutdown. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.
Example:
-> { "execute": "set-action",
"arguments": {
"reboot": "none",
"shutdown": "poweroff",
"watchdog": "debug" } }
<- { "return": {} }
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be. However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug. Use it instead of a separate runstate.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These will behave more like normal files in that writes beyond the EOF
will automatically grow the export size.
As an optimization, keep the RESIZE permission for growable exports so
we do not have to take it for every post-EOF write. (This permission is
not released when the export is destroyed, because at that point the
BlockBackend is destroyed altogether anyway.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
block-export-add type=fuse allows mounting block graph nodes via FUSE on
some existing regular file. That file should then appears like a raw
disk image, and accesses to it result in accesses to the exported BDS.
Right now, we only implement the necessary block export functions to set
it up and shut it down. We do not implement any access functions, so
accessing the mount point only results in errors. This will be
addressed by a followup patch.
We keep a hash table of exported mount points, because we want to be
able to detect when users try to use a mount point twice. This is
because we invoke stat() to check whether the given mount point is a
regular file, but if that file is served by ourselves (because it is
already used as a mount point), then this stat() would have to be served
by ourselves, too, which is impossible to do while we (as the caller)
are waiting for it to settle. Therefore, keep track of mount point
paths to at least catch the most obvious instances of that problem.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201027190600.192171-3-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.
Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
We use x.y most of the time, and x.y.0 sometimes. Normalize for
consistency.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201118064158.3359056-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Commit 02c4bdf1 tried to make signal=on the default for stdio chardevs
except for '-serial mon:stdio', but it forgot about QMP and accidentally
switched the QMP default from true (except for -nographic) to false
(always). The documentation was kept unchanged and still describes the
opposite of the old behaviour (which is an even older documentation
bug).
Fix all of this by making signal=true the default in ChardevStdio and
documenting it as such.
Fixes: 02c4bdf1d2ca8c02a9bae16398f260b5c08d08bf
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201023101222.250147-2-kwolf@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
BlockDeviceMapEntry has never been used. It was added in commit
facd6e2 "so that it is published through the introspection mechanism."
What exactly introspecting types that aren't used for anything could
accomplish isn't clear. What "introspection mechanism" to use is also
nebulous. To the best of my knowledge, there has never been one that
covered this type. Certainly not query-qmp-schema, which includes
only types that are actually used in QMP.
Not being able to introspect BlockDeviceMapEntry hasn't bothered
anyone enough to complain in almost four years. Get rid of it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201104165513.72720-3-mreitz@redhat.com>
|
|
MapEntry and BlockDeviceMapEntry are kind of the same thing, and the
latter is not used, so we want to remove it. However, the documentation
it provides for some fields is better than that of MapEntry, so steal
some of it for the latter.
(And adjust them a bit in the process, because I feel like we can make
them even clearer.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20201104165513.72720-2-mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Audio stuff is under "Miscellanea", and authorization stuff is under
"Input". Add suitable header doc comments to correct that.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201102081550.171061-3-armbru@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
staging
Doc and bug fixes
# gpg: Signature made Wed 04 Nov 2020 17:01:29 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
qapi, qemu-options: make all parsing visitors parse boolean options the same
qtest: escape device name in device-introspect-test
ivshmem-test: do not use short-form boolean option
semihosting: fix order of initialization functions
fuzz: fuzz offsets within pio/mmio regions
fuzz: check the MR in the DMA callback
fuzz: fix writing DMA patterns
tests/qtest: Fix potential NULL pointer dereference in qos_build_main_args()
configure: fix gio_libs reference
meson: fix warning for bad sphinx-build
tests/qtest/libqos/ahci.c: Avoid NULL dereference in ahci_exec()
tests/qtest/libqtest.c: Check for setsockopt() failure
meson: vhost-user-gpu/virtiofsd: use absolute path
meson: use b_staticpic=false for meson >=0.56.0
qtest: add a reproducer for LP#1878642
hw/isa/lpc_ich9: Ignore reserved/invalid SCI IRQ
scripts/oss-fuzz: rename bin/qemu-fuzz-i386
exec: Remove dead code (CID 1432876)
docs: expand sourceset documentation
cutils: replace strdup with g_strdup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
OptsVisitor, StringInputVisitor and the keyval visitor have
three different ideas of how a human could write the value of
a boolean option. Pay homage to the backwards-compatibility
gods and make the new common helper accept all four sets (on/off,
true/false, y/n and yes/no), but remove case-insensitivity.
Since OptsVisitor is supposed to match qemu-options, adjust
it as well.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201103161339.447118-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Thanks to the monitors' coroutine support (merge commit b7092cda1b3),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.
The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The abstract socket namespace is a non-portable Linux extension. An
attempt to use it elsewhere should fail with ENOENT (the abstract
address looks like a "" pathname, which does not resolve). We report
this failure like
Failed to connect socket abc: No such file or directory
Tolerable, although ENOTSUP would be better.
However, introspection lies: it has @abstract regardless of host
support. Easy enough to fix: since Linux provides them since 2.2,
'if': 'defined(CONFIG_LINUX)' should do.
The above failure becomes
Parameter 'backend.data.addr.data.abstract' is unexpected
I consider this an improvement.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
into staging
VFIO update 2020-11-01
* Migration support (Kirti Wankhede)
* s390 DMA limiting (Matthew Rosato)
* zPCI hardware info (Matthew Rosato)
* Lock guard (Amey Narkhede)
* Print fixes (Zhengui li)
* Warning/build fixes
# gpg: Signature made Sun 01 Nov 2020 20:38:10 GMT
# gpg: using RSA key 239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full]
# gpg: aka "Alex Williamson <alex@shazbot.org>" [full]
# gpg: aka "Alex Williamson <alwillia@redhat.com>" [full]
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full]
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-update-20201101.0: (32 commits)
vfio: fix incorrect print type
hw/vfio: Use lock guard macros
s390x/pci: get zPCI function info from host
vfio: Add routine for finding VFIO_DEVICE_GET_INFO capabilities
s390x/pci: use a PCI Function structure
s390x/pci: clean up s390 PCI groups
s390x/pci: use a PCI Group structure
s390x/pci: create a header dedicated to PCI CLP
s390x/pci: Honor DMA limits set by vfio
s390x/pci: Add routine to get the vfio dma available count
vfio: Find DMA available capability
vfio: Create shared routine for scanning info capabilities
s390x/pci: Move header files to include/hw/s390x
linux-headers: update against 5.10-rc1
update-linux-headers: Add vfio_zdev.h
qapi: Add VFIO devices migration stats in Migration stats
vfio: Make vfio-pci device migration capable
vfio: Add ioctl to get dirty pages bitmap during dma unmap
vfio: Dirty page tracking when vIOMMU is enabled
vfio: Add vfio_listener_log_sync to mark dirty pages
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Added amount of bytes transferred to the VM at destination by all VFIO
devices
Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Allow the server to expose an additional metacontext to be requested
by savvy clients. qemu-nbd adds a new option -A to expose the
qemu:allocation-depth metacontext through NBD_CMD_BLOCK_STATUS; this
can also be set via QMP when using block-export-add.
qemu as client is hacked into viewing the key aspects of this new
context by abusing the already-experimental x-dirty-bitmap option to
collapse all depths greater than 2, which results in a tri-state value
visible in the output of 'qemu-img map --output=json' (yes, that means
x-dirty-bitmap is now a bit of a misnomer, but I didn't feel like
renaming it as it would introduce a needless break of back-compat,
even though we make no compat guarantees with x- members):
unallocated (depth 0) => "zero":false, "data":true
local (depth 1) => "zero":false, "data":false
backing (depth 2+) => "zero":true, "data":true
libnbd as client is probably a nicer way to get at the information
without having to decipher such hacks in qemu as client. ;)
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-11-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Since 'block-export-add' is new to 5.2, we can still tweak the
interface; there, allowing 'bitmaps':['str'] is nicer than
'bitmap':'str'. This wires up the qapi and qemu-nbd changes to permit
passing multiple bitmaps as distinct metadata contexts that the NBD
client may request, but the actual support for more than one will
require a further patch to the server.
Note that there are no changes made to the existing deprecated
'nbd-server-add' command; this required splitting the QAPI type
BlockExportOptionsNbd, which fortunately does not affect QMP
introspection.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201027050556.269064-5-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
|
|
Allow the number of queues to be configured using --export
vhost-user-blk,num-queues=N. This setting should match the QEMU --device
vhost-user-blk-pci,num-queues=N setting but QEMU vhost-user-blk.c lowers
its own value if the vhost-user-blk backend offers fewer queues than
QEMU.
The vhost-user-blk-server.c code is already capable of multi-queue. All
virtqueue processing runs in the same AioContext. No new locking is
needed.
Add the num-queues=N option and set the VIRTIO_BLK_F_MQ feature bit.
Note that the feature bit only announces the presence of the num_queues
configuration space field. It does not promise that there is more than 1
virtqueue, so we can set it unconditionally.
I tested multi-queue by running a random read fio test with numjobs=4 on
an -smp 4 guest. After the benchmark finished the guest /proc/interrupts
file showed activity on all 4 virtio-blk MSI-X. The /sys/block/vda/mq/
directory shows that Linux blk-mq has 4 queues configured.
An automated test is included in the next commit.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201001144604.559733-2-stefanha@redhat.com
[Fixed accidental tab characters as suggested by Markus Armbruster
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Make it possible to specify the iothread where the export will run. By
default the block node can be moved to other AioContexts later and the
export will follow. The fixed-iothread option forces strict behavior
that prevents changing AioContext while the export is active. See the
QAPI docs for details.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200929125516.186715-5-stefanha@redhat.com
[Fix stray '#' character in block-export.json and add missing "(since:
5.2)" as suggested by Eric Blake.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Use the new QAPI block exports API instead of defining our own QOM
objects.
This is a large change because the lifecycle of VuBlockDev needs to
follow BlockExportDriver. QOM properties are replaced by QAPI options
objects.
VuBlockDev is renamed VuBlkExport and contains a BlockExport field.
Several fields can be dropped since BlockExport already has equivalents.
The file names and meson build integration will be adjusted in a future
patch. libvhost-user should probably be built as a static library that
is linked into QEMU instead of as a .c file that results in duplicate
compilation.
The new command-line syntax is:
$ qemu-storage-daemon \
--blockdev file,node-name=drive0,filename=test.img \
--export vhost-user-blk,node-name=drive0,id=export0,unix-socket=/tmp/vhost-user-blk.sock
Note that unix-socket is optional because we may wish to accept chardevs
too in the future.
Markus noted that supported address families are not explicit in the
QAPI schema. It is unlikely that support for more address families will
be added since file descriptor passing is required and few address
families support it. If a new address family needs to be added, then the
QAPI 'features' syntax can be used to advertize them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200924151549.913737-12-stefanha@redhat.com
[Skip test on big-endian host architectures because this device doesn't
support them yet (as already mentioned in a code comment).
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Keep statistics of some hardware errors, and number of
aligned/unaligned I/O accesses.
QMP example booting a full RHEL 8.3 aarch64 guest:
{ "execute": "query-blockstats" }
{
"return": [
{
"device": "",
"node-name": "drive0",
"stats": {
"flush_total_time_ns": 6026948,
"wr_highest_offset": 3383991230464,
"wr_total_time_ns": 807450995,
"failed_wr_operations": 0,
"failed_rd_operations": 0,
"wr_merged": 3,
"wr_bytes": 50133504,
"failed_unmap_operations": 0,
"failed_flush_operations": 0,
"account_invalid": false,
"rd_total_time_ns": 1846979900,
"flush_operations": 130,
"wr_operations": 659,
"rd_merged": 1192,
"rd_bytes": 218244096,
"account_failed": false,
"idle_time_ns": 2678641497,
"rd_operations": 7406,
},
"driver-specific": {
"driver": "nvme",
"completion-errors": 0,
"unaligned-accesses": 2959,
"aligned-accesses": 4477
},
"qdev": "/machine/peripheral-anon/device[0]/virtio-backend"
}
]
}
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201001162939.1567915-1-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Restricting xen-set-global-dirty-log and xen-load-devices-state
commands migration.json pulls slightly less QAPI-generated code
into user-mode and tools.
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-6-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Restricting query-kvm to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-5-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Restricting memsave/pmemsave to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-4-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Restricting system_wakeup/system_reset/system_powerdown to
machine.json pulls slightly less QAPI-generated code into
user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-3-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Restricting 'inject-nmi' to machine.json pulls slightly
less QAPI-generated code into user-mode and tools.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201012121536.3381997-2-philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
into staging
x86 queue, 2020-10-15
Cleanups:
* Drop x86_cpu_get_supported_feature_word() forward declaration
(Vitaly Kuznetsov)
* Delete kvm_allows_irq0_override() (Eduardo Habkost)
* Correct documentation of kvm_irqchip_*() (Eduardo Habkost)
* Fix FEATURE_HYPERV_EDX value in hyperv_passthrough case (Zhenyu Wang)
Deprecation:
* CPU model deprecation API (Robert Hoo)
* Mark Icelake-Client CPU models deprecated (Robert Hoo)
Bug fixes:
* Remove core_id assert check in CPUID 0x8000001E (Babu Moger)
# gpg: Signature made Thu 15 Oct 2020 17:43:58 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/x86-next-pull-request:
i386: Mark Icelake-Client CPU models deprecated
cpu: Introduce CPU model deprecation API
kvm: Correct documentation of kvm_irqchip_*()
i386/kvm: Delete kvm_allows_irq0_override()
i386/kvm: Remove IRQ routing support checks
i386/kvm: Require KVM_CAP_IRQ_ROUTING
target/i386: Remove core_id assert check in CPUID 0x8000001E
i386/kvm: fix FEATURE_HYPERV_EDX value in hyperv_passthrough case
i386: drop x86_cpu_get_supported_feature_word() forward declaration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This adds a special meaning for 'help' and '?' as options to the keyval
parser. Instead of being an error (because of a missing value) or a
value for an implied key, they now request help, which is a new boolean
output of the parser in addition to the QDict.
A new parameter 'p_help' is added to keyval_parse() that contains on
return whether help was requested. If NULL is passed, requesting help
results in an error and all other cases work like before.
Turning previous error cases into help is a compatible extension. The
behaviour potentially changes for implied keys: They could previously
get 'help' as their value, which is now interpreted as requesting help.
This is not a problem in practice because 'help' and '?' are not a valid
values for the implied key of any option parsed with keyval_parse():
* audiodev: union Audiodev, implied key "driver" is enum AudiodevDriver,
"help" and "?" are not among its values
* display: union DisplayOptions, implied key "type" is enum
DisplayType, "help" and "?" are not among its values
* blockdev: union BlockdevOptions, implied key "driver is enum
BlockdevDriver, "help" and "?" are not among its values
* export: union BlockExport, implied key "type" is enum BlockExportType,
"help" and "?" are not among its values
* monitor: struct MonitorOptions, implied key "mode" is enum MonitorMode,
"help" and "?" are not among its values
* nbd-server: struct NbdServerOptions, no implied key.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201011073505.1185335-5-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Implement the ability of marking some versions deprecated. When
that CPU model is chosen, print a warning. The warning message
can be customized, e.g. suggesting an alternative CPU model to be
used instead.
The deprecation message will be printed by x86_cpu_list_entry(),
e.g. '-cpu help'.
QMP command 'query-cpu-definitions' will return a bool value
indicating the deprecation status.
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Message-Id: <1600758855-80046-1-git-send-email-robert.hu@linux.intel.com>
[ehabkost: reword commit message]
[ehabkost: Handle NULL cpu_type]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
completed
Make dirty_rate field optional, present dirty rate only when querying
the rate has completed.
The qmp results is shown as follow:
@unstarted:
{"return":{"status":"unstarted","start-time":0,"calc-time":0},"id":"libvirt-12"}
@measuring:
{"return":{"status":"measuring","start-time":102931,"calc-time":1},"id":"libvirt-85"}
@measured:
{"return":{"status":"measured","dirty-rate":4,"start-time":150146,"calc-time":1},"id":"libvirt-15"}
Signed-off-by: Chuan Zheng <zhengchuan@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <1601350938-128320-3-git-send-email-zhengchuan@huawei.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
block_resize performs some I/O that could potentially take quite some
time, so use it as an example for the new 'coroutine': true annotation
in the QAPI schema.
bdrv_truncate() requires that we're already in the right AioContext for
the BlockDriverState if called in coroutine context. So instead of just
taking the AioContext lock, move the QMP handler coroutine to the
context.
Call blk_unref() only after switching back because blk_unref() may only
be called in the main thread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-15-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.
For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This way, a monitor command handler will still be able to access the
current monitor, but when it yields, all other code code will correctly
get NULL from monitor_cur().
This uses a hash table to map the coroutine pointer to the current
monitor of that coroutine. Outside of coroutine context, we associate
the current monitor with the leader coroutine of the current thread.
Approaches to implement some form of coroutine local storage directly in
the coroutine core code have been considered and discarded because they
didn't end up being much more generic than the hash table and their
performance impact on coroutines not using coroutine local storage was
unclear. As the block layer uses a coroutine per I/O request, this is a
fast path and we have to be careful. It's safest to just stay out of
this path with code only used by the monitor.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-8-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This patch adds hmp/qmp commands replay_seek/replay-seek that proceed
the execution to the specified instruction count.
The command automatically loads nearest snapshot and replays the execution
to find the desired instruction count.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
--
v4 changes:
- fixed HMP command description indent
- removed useless error_free call
Message-Id: <160174521180.12451.14033112911009278753.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch introduces replay_break, replay_delete_break
qmp and hmp commands.
These commands allow stopping at the specified instruction.
It may be useful for debugging when there are some known
events that should be investigated.
replay_break command has one argument - number of instructions
executed since the start of the replay.
replay_delete_break removes previously set breakpoint.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
--
v4 changes:
- removed useless error_free call
Message-Id: <160174520606.12451.7056879546045599378.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch introduces 'info replay' monitor command and
corresponding qmp request.
These commands request the current record/replay mode, replay log file
name, and the instruction count (number of recorded/replayed
instructions). The instruction count can be used with the
replay_seek/replay_break commands added in the next two patches.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <160174520026.12451.13112161947433306561.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch adds replay.json file. It will be
used for adding record/replay-related data structures and commands.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <160174519444.12451.3472949430004845434.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Saving icount as a parameters of the snapshot allows navigation between
them in the execution replay scenario.
This information can be used for finding a specific snapshot for proceeding
the recorded execution to the specific moment of the time.
E.g., 'reverse step' action (introduced in one of the following patches)
needs to load the nearest snapshot which is prior to the current moment
of time.
This patch also updates snapshot test which verifies qemu monitor output.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
--
v4 changes:
- squashed format update with test output update
v7 changes:
- introduced the spaces between the fields in snapshot info output
- updated the test to match new field widths
Message-Id: <160174518865.12451.14327573383978752463.stgit@pasha-ThinkPad-X280>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce memory failure events for hypervisor and guest. This lets
mft: Need exactly one file argument. Try `mft --help' for more
information.
Suggested by Peter Maydell, rename events name&description to make
them architecture-neutral; and suggested by Paolo, add more info to
distinguish a mce is AR/AO, and if a previous MCE was still being
processed in the guest.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20200930100440.1060708-3-pizhenwei@bytedance.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
These QMP commands are replaced by block-export-add/del.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-28-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The 'writable' option is a basic option that will probably be applicable
to most if not all export types that we will implement. Move it from NBD
to the generic BlockExport layer.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-26-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This adds a simple QMP command to query the list of block exports.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-25-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Clients may want to know when an export has finally disappeard
(block-export-del returns earlier than that in the general case), so add
a QAPI event for it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200924152717.287415-22-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Implement a new QMP command block-export-del and make nbd-server-remove
a wrapper around it.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We'll need an id to identify block exports in monitor commands. This
adds one.
Note that this is different from the 'name' option in the NBD server,
which is the externally visible export name. While block export ids need
to be unique in the whole process, export names must be unique only for
the same server. Different export types or (potentially in the future)
multiple NBD servers can have the same export name externally, but still
need different block export ids internally.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Every block export needs a block node to export, so add a 'node-name'
option to BlockExportOptions and remove the replaced option 'device'
from BlockExportOptionsNbd.
To maintain compatibility in nbd-server-add, BlockExportOptionsNbd needs
to be wrapped by a new type NbdServerAddOptions that adds 'device' back
because nbd-server-add doesn't use the BlockExportOptions base type at
all (so even without changing it to a 'node-name' option in
block-export-add, this compatibility code would be necessary).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200924152717.287415-16-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
