summaryrefslogtreecommitdiff
path: root/migration-fd.c
AgeCommit message (Collapse)Author
2013-03-11migration: eliminate s->migration_filePaolo Bonzini
The indirection is useless now. Backends can open s->file directly. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for writing outgoing migration dataPaolo Bonzini
Second, drop the file descriptor indirection, and write directly to the QEMUFile. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-03-11migration: use QEMUFile for migration channel lifetimePaolo Bonzini
As a start, use QEMUFile to store the destination and close it. qemu_get_fd gets a file descriptor that will be used by the write callbacks. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20migration: make writes blockingJuan Quintela
Move all the writes to the migration_thread, and make writings blocking. Notice that are still using the iothread for everything that we do. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20migration-fd: remove duplicate includeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-20migration: include qemu-file.hJuan Quintela
They don't use/know anything about buffered-file. Signed-off-by: Juan Quintela <quintela@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19migration: move include files to include/migration/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19monitor: move include files to include/monitor/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19block: move include files to include/block/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19janitor: do not include qemu-char everywherePaolo Bonzini
Touching char/char.h basically causes the whole of QEMU to be rebuilt. Avoid this, it is usually unnecessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: move qemu_fclose to process_incoming_migrationPaolo Bonzini
The common suffix is now just process_incoming_migration. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: xxx_close will only be called oncePaolo Bonzini
No need to test s->fd again, it is tested in the caller. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: clean up server sockets and handlers before invoking ↵Paolo Bonzini
process_incoming_migration A first step towards making a common "suffix" for all migration protocols, and moving it to process_incoming_migration. Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-02migration: replace qemu_stdio_fd with qemu_get_fdPaolo Bonzini
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23migration (incoming): add error propagation to fd and exec protocolsPaolo Bonzini
And remove the superfluous integer return value. Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-23migration (outgoing): add error propagation for all protocolsPaolo Bonzini
Error propagation is already there for socket backends. Add it to other protocols, simplifying code that tests for errors that will never happen. With all protocols understanding Error, the code can be simplified further by removing the return value. Unfortunately, the quality of error messages varies depending on where the error is detected, because no Error is passed to the NonBlockingConnectHandler. Thus, the exact error message still cannot be sent to the user if the OS reports it asynchronously via SO_ERROR. If NonBlockingConnectHandler received an Error**, we could for example report the error class and/or message via a new field of the query-migration command even if it is reported asynchronously. Before: (qemu) migrate fd:ffff migrate: An undefined error has occurred (qemu) info migrate (qemu) After: (qemu) migrate fd:ffff migrate: File descriptor named 'ffff' has not been found (qemu) info migrate capabilities: xbzrle: off Migration status: failed total time: 0 milliseconds Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-09-26monitor: add Error * argument to monitor_get_fdPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-03-15qapi: Convert migrateLuiz Capitulino
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-13prepare for future GPLv2+ relicensingPaolo Bonzini
All files under GPLv2 will get GPLv2+ changes starting tomorrow. event_notifier.c and exec-obsolete.h were only ever touched by Red Hat employees and can be relicensed now. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01migration: flush migration data to disk.Gerd Hoffmann
This patch increases robustness when migrating to a file with two little changes: (1) Before closing the migration file handle checks if it happens to be a regular file and if so it issues a fsync. This way the data is flushed to disk before qemu sends the migration completed event. (2) It adds error checking. In case either fsync or close syscall fails pass up the error (and fail migration). [ v2: return -errno instead of -1 ] Cc: Juan Quintela <quintela@redhat.com> Cc: Jiri Denemark <jdenemar@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: move migrate_new to do_migrateJuan Quintela
Once there, remove all parameters that don't need to be passed to *start_outgoing_migration() functions Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Refactor MigrationState creationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Rename FdMigrationState MigrationStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Fold MigrationState into FdMigrationStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Make *start_outgoing_migration return FdMigrationStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-04-15Remove unused sysemu.h include directivesBlue Swirl
Remove unused sysemu.h include directives to speed up build with the following patches. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-22Factorize common migration incoming codeJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-19remove useless castJuan Quintela
values are already pointers, no need to cast them to void * Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-17migration: Clear fd also in error casesJuan Quintela
Not clearing the fd and closing the file makes qemu spin using 100%CPU after incoming migration error. See for instance bug: https://bugzilla.redhat.com/show_bug.cgi?id=518032 Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2009-12-03live migration: Propagate output monitor to callback handlerJan Kiszka
In order to allow proper progress reporting to the monitor that initiated the migration, forward the monitor reference through the migration layer down to SaveLiveStateHandler. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-17Block live migrationlirans@il.ibm.com
This patch introduces block migration called during live migration. Block are being copied to the destination in an async way. First the code will transfer the whole disk and then transfer all dirty blocks accumulted during the migration. Still need to improve transition from the iterative phase of migration to the end phase. For now transition will take place when all blocks transfered once, all the dirty blocks will be transfered during the end phase (guest is suspended). Changes from v4: - Global variabels moved to a global state structure allocated dynamically. - Minor coding style issues. - Poll block.c for tracking of dirty blocks instead of manage it here. Signed-off-by: Liran Schour <lirans@il.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27add file descriptor migrationPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 02:31:23 +0000