summaryrefslogtreecommitdiff
path: root/linux-user/sparc
AgeCommit message (Collapse)Author
2018-11-15linux-user/sparc/signal.c: Remove dead codePeter Maydell
Coverity complains (CID 1390847) about some dead code in do_sigreturn(). This is an if (err) clause that can never be true, copied from the kernel (where __get_user returns an error). The one code path that could report an error is in the currently commented-out pseudocode for handling FPU register restoring, so move the if into that comment (and fix the broken indent in the comment in the process). (The new position for the error check is also the semantically correct one -- we should not restore the signal mask from the signal frame if we get an error here, so the check must be done before set_sigmask(), not after.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 20181115114616.26265-1-peter.maydell@linaro.org
2018-11-12linux-user: Don't call gdb_handlesig() before queue_signal()Peter Maydell
The CPU main-loop routines for linux-user generally call gdb_handlesig() when they're about to queue a SIGTRAP signal. This is wrong, because queue_signal() will cause us to pend a signal, and process_pending_signals() will then call gdb_handlesig() itself. So the effect is that we notify gdb of the SIGTRAP, and then if gdb says "OK, continue with signal X" we will incorrectly notify gdb of the signal X as well. We don't do this double-notify for anything else, only SIGTRAP. Remove this unnecessary and incorrect code from all the targets except for nios2 (whose main loop is doing something different and broken, and will be handled in a separate patch). This bug only manifests if the user responds to the reported SIGTRAP using "signal SIGFOO" rather than "continue"; since the latter is the overwhelmingly common thing to do after a breakpoint most people won't have hit this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20181019174958.26616-2-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-11-12linux-user: Remove dead error-checking codePeter Maydell
Remove some dead code spotted by Coverity (CID 1009855, 1390854, 1390847). The underlying cause in all these cases is the same: QEMU's put_user operations can't result in errors, but the kernel's equivalent does. So when code was copied from the kernel signal-frame-setup/teardown code, checks on error flags that were needed in the kernel became dead code for us. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20181019161715.12122-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-18linux-user/sparc/signal.c: Remove unnecessary commentPeter Maydell
Remove a comment suggesting that we need to call tb_flush() after writing the SPARC signal frame trampoline insns. This isn't necessary in QEMU, because (even if the guest architecture requires explicit icache maintenance) we ensure that memory writes result in invalidation of translated code from that memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20181009184017.15675-1-peter.maydell@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Report error message on stderr, rather than stdoutPhilippe Mathieu-Daudé
Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/(\s+)printf\s*\(("Unhandled.*)\);/\1fprintf(stderr, \2);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180706155127.7483-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-07-09linux-user: Do not report "syscall not implemented" by defaultPhilippe Mathieu-Daudé
This can still be reported using the "-d unimp" command line option. Code change produced with: git ls-files linux-user | \ xargs sed -i -E 's/fprintf\(stderr,\s?(".*not implemented\\n")\);/qemu_log_mask(LOG_UNIMP, \1);/g' Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180706155127.7483-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-06-04linux-user: move sparc signal definitions to sparc/target_signal.hLaurent Vivier
Remove sparc64/target_signal.h, use sparc/target_signal.h instead. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-11-laurent@vivier.eu>
2018-06-04linux-user: move get_sp_from_cpustate() to target_cpu.hLaurent Vivier
Remove useless includes Fix HPPA include guard. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Acked-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180529194207.31503-9-laurent@vivier.eu>
2018-06-04linux-user: move sparc/sparc64 fcntl definitions to sparc/target_fcntl.hLaurent Vivier
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-8-laurent@vivier.eu>
2018-06-04linux-user: move generic fcntl definitions to generic/fcntl.hLaurent Vivier
add a per target target_fcntl.h and include the generic one from them No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20180529194207.31503-2-laurent@vivier.eu>
2018-05-25linux-user: copy sparc/sockbits.h definitions from linuxLaurent Vivier
Values defined for sparc are not correct. Copy the content of "arch/sparc/include/uapi/asm/socket.h" to fix them. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180519092956.15134-8-laurent@vivier.eu>
2018-05-25linux-user: update ARCH_HAS_SOCKET_TYPES useLaurent Vivier
to be like in the kernel and rename it TARGET_ARCH_HAS_SOCKET_TYPES Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180519092956.15134-7-laurent@vivier.eu>
2018-05-25linux-user: move sparc/sparc64 socket.h definitions to sparc/sockbits.hLaurent Vivier
No code change. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180519092956.15134-4-laurent@vivier.eu>
2018-05-11linux-user: fix UNAME_MACHINE for sparc/sparc64Laurent Vivier
"sun4" is not recognized by config.guess. linux defines sparc and sparc64 in arch/sparc/Makefile. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20180509231123.20864-7-laurent@vivier.eu>
2018-05-11linux-user: add sparc/sparc64 specific errnoLaurent Vivier
Copied from linux/arch/sparc/include/uapi/asm/errno.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20180509231123.20864-6-laurent@vivier.eu>
2018-05-11linux-user: update sparc/syscall_nr.h to linux header 4.16Laurent Vivier
And kill sys_aplib, add sys_sync_file_range: on sparc, since linux 2.6.17, aplib syscall has been replaced by sync_file_range syscall. (289eee6fa78e ["SPARC]: Wire up sys_sync_file_range() into syscall tables.") The syscall has been removed in linux v2.5.71 (6196166fad "[SPARC64]: Kill sys_aplib.") Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20180509231123.20864-4-laurent@vivier.eu>
2018-05-03linux-user: introduce target_sigsp() and target_save_altstack()Laurent Vivier
Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411192347.30228-1-laurent@vivier.eu>
2018-04-30linux-user: move sparc/sparc64 cpu loop to sparc directoryLaurent Vivier
No code change, only move code from main.c to sparc/cpu_loop.c. Include sparc/cpu_loop.c in sparc64/cpu_loop.c to avoid to duplicate code. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180411185651.21351-6-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch cpu_loop.cLaurent Vivier
Create a cpu_loop-common.h for future use by these new files and use it in the existing main.c Introduce target_cpu_copy_regs(): declare the function in cpu_loop-common.h and an empty function for each target, to move all the cpu_loop prologues to this function. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
2018-04-30linux-user: define TARGET_ARCH_HAS_SETUP_FRAMELaurent Vivier
Instead of calling setup_frame() conditionally to a list of known targets, define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function and call it only if the macro is defined. Move declarations of setup_frame() and setup_rt_frame() to linux-user/signal-common.h Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
2018-04-30linux-user: move sparc/sparc64 signal.c parts to sparc directoryLaurent Vivier
No code change, only move code from signal.c to sparc/signal.c, except adding includes and exporting setup_frame() and setup_rt_frame(). sparc64/signal.c includes sparc/signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-18-laurent@vivier.eu>
2018-04-30linux-user: create a dummy per arch signal.cLaurent Vivier
Create a signal-common.h for future use by these new files and use it in the existing signal.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
2018-02-25linux-user: Move CPU type name selection to a functionLaurent Vivier
Instead of a sequence of "#if ... #endif" move the selection to a function in linux-user/*/target_elf.h We can't add them in linux-user/*/target_cpu.h because we will need to include "elf.h" to use ELF flags with eflags, and including "elf.h" in "target_cpu.h" introduces some conflicts in elfload.c Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
2018-02-18linux-user: Implement ioctl cmd TIOCGPTPEERAndreas Schwab
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl. Signed-off-by: Andreas Schwab <schwab@suse.de> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <mvmbmhdosb9.fsf_-_@suse.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-09-01sparc: embed sparc_def_t into CPUSPARCStateIgor Mammedov
Make CPUSPARCState::def embedded so it would be allocated as part of cpu instance and we won't have to worry about cleaning def pointer up mannualy on cpu destruction. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1503592308-93913-4-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2016-09-21linux-user: Use correct target SHMLBA in shmat()Peter Maydell
The shmat() handling needs to do target-specific handling of the attach address for shmat(): * if the SHM_RND flag is passed, the address is rounded down to a SHMLBA boundary * if SHM_RND is not passed, then the call is failed EINVAL if the address is not a multiple of SHMLBA Since SHMLBA is target-specific, we need to do this checking and rounding in QEMU and can't leave it up to the host syscall. Allow targets to define TARGET_FORCE_SHMLBA and provide a target_shmlba() function if appropriate, and update do_shmat() to honour them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-19linux-user: define missing sparc syscallsLaurent Vivier
NR_lookup_dcookie, NR_fadvise64, NR_fadvise64_64 Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-07-12linux-user: Clean up target_structs.h header guardsMarkus Armbruster
These headers all use TARGET_STRUCTS_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_STRUCTS_H for linux-user/$target/target_structs.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_signal.h header guardsMarkus Armbruster
These headers all use TARGET_SIGNAL_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_SIGNAL_H for linux-user/$target/target_signal.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_cpu.h header guardsMarkus Armbruster
These headers all use TARGET_CPU_H as header guard symbol. Reuse of the same guard symbol in multiple headers is okay as long as they cannot be included together. Since we can avoid guard symbol reuse easily, do so: use guard symbol $target_TARGET_CPU_H for linux-user/$target/target_cpu.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-12linux-user: Clean up target_syscall.h header guardsMarkus Armbruster
Some of them use guard symbol TARGET_SYSCALL_H, but we also have CRIS_SYSCALL_H, MICROBLAZE_SYSCALLS_H, TILEGX_SYSCALLS_H and __UC32_SYSCALL_H__. They all upset scripts/clean-header-guards.pl. Reuse of the same guard symbol TARGET_SYSCALL_H in multiple headers is okay as long as they cannot be included together. The script can't tell, so it warns. The script dislikes the other guard symbols, too. They don't match their file name (they should, to make guard collisions less likely), and __UC32_SYSCALL_H__ is a reserved identifier. Clean them all up: use guard symbol $target_TARGET_SYSCALL_H for linux-user/$target/target_sycall.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-27linux-user: Support for restarting system calls for SPARC targetsTimothy E Baldwin
Update the SPARC main loop and sigreturn code: * on TARGET_ERESTARTSYS, wind guest PC backwards to repeat syscall insn * set all guest CPU state within signal.c code on sigreturn * handle TARGET_QEMU_ESIGRETURN in the main loop as the indication that the main loop should not touch any guest CPU state Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Message-id: 1441497448-32489-9-git-send-email-T.E.Baldwin99@members.leeds.ac.uk [PMM: Commit message tweaks; drop TARGET_USE_ERESTARTSYS define] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23linux-user: correct timerfd_create syscall numbersRiku Voipio
x86, m68k, ppc, sh4 and sparc failed to enable timerfd, because they didn't have timerfd_create system call defined. Instead QEMU defined timerfd syscall. Checking with kernel sources, it appears kernel developers reused timerfd syscall number with timerfd_create, presumably since no userspace called the old syscall number. Reported-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23linux-user: sync syscall numbers with kernelRiku Voipio
Sync syscall numbers to match the linux v4.5-rc1 kernel. Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2016-02-23build: [linux-user] Rename "syscall.h" to "target_syscall.h" in target ↵Lluís Vilanova
directories This fixes double-definitions in linux-user builds when using the UST tracing backend (which indirectly includes the system's "syscall.h"). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Support target-to-host translation of mlockall argumentTom Musta
The argument to the mlockall system call is not necessarily the same on all platforms and thus may require translation prior to passing to the host. For example, PowerPC 64 bit platforms define values for MCL_CURRENT (0x2000) and MCL_FUTURE (0x4000) which are different from Intel platforms (0x1 and 0x2, respectively) Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-08-22linux-user: Minimum Sig Handler Stack Size for PPC64 ELF V2Tom Musta
The ELF V2 ABI for PPC64 defines MINSIGSTKSZ as 4096 bytes whereas it was 2048 previously. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-03-10linux-user: set minimum kernel version to 2.6.32Riku Voipio
Popular glibc based distributions[1] require minimum 2.6.32 as kernel version. For some targets 2.6.18 would be enough, but dropping so low would mean some suboptimal system calls could get used. Set the minimum kernel advertized to 2.6.32 for all architectures but aarch64 to ensure working qemu linux-user in case host kernel is older. [1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078 Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-02-18linux-user: sync syscall numbers upto 3.13Riku Voipio
All others updated except unicore, which doesn't look right to begin with. Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-11-29linux-user: create target_structs header to place ipc_perm and shmid_dsPetar Jovanovic
Creating target_structs header in linux-user/$arch/ and making target_ipc_perm and target_shmid_ds its first inhabitants. The struct defintions may/should be further fine-tuned by arch maintainers. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Clean up handling of clone() argument orderPeter Maydell
Linux manages to have three separate orderings of the arguments to the clone() syscall on different architectures. In the kernel these are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2. Clean up our implementation of this to use similar #define names rather than a TARGET_* ifdef ladder. This includes behaviour changes fixing bugs on cris, x86-64, m68k, openrisc and unicore32. cris had explicit but wrong handling; the others were just incorrectly using QEMU's default, which happened to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears to be broken in the mainline kernel in that it tries to use arg3 for both parent_tidptr and newtls simultaneously -- we don't attempt to emulate this bug...) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-22linux-user: Enable NPTL for SPARC targetsPeter Maydell
Provide the missing cpu_set_tls(), and resolve the FIXME in cpu_clone_regs() by clearing the carry flag for the child. This allows us to turn on building with NPTL for SPARC. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-11linux-user: Add more sparc syscall numbersDillon Amburgey
Signed-off-by: Dillon Amburgey <dillona@dillona.com> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2012-12-08linux-user: Merge pread/pwrite into pread64/pwrite64Peter Maydell
The Linux syscalls underlying pread() and pwrite() take a 64 bit offset on all architectures, even if some of them name the syscall "pread/pwrite" rather than "pread64/pwrite64" for historical reasons. So move the four QEMU target architectures (arm, i386, sparc, unicore32) which were defining TARGET_NR_pread/pwrite to define TARGET_NR_pread64/pwrite64 instead, and drop the TARGET_NR_pread/pwrite implementation code completely. (Based on examination of the kernel sources for the four architectures this patch affects.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-27sparc-linux-user: Add some missing syscall numbersRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
2011-07-11linux-user: Add syscall numbers from kernel 2.6.39.2Peter Maydell
Add syscall numbers for new syscall numbers; this brings us into line with Linux 2.6.39.2. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-06-16linux-user: update syscall listRiku Voipio
In preparation for supporting pipe2() Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 19:35:59 +0000