summaryrefslogtreecommitdiff
path: root/include/hw/usb.h
AgeCommit message (Collapse)Author
2021-07-09usb: drop usb_host_dev_is_scsi_storage hookGerd Hoffmann
Introduce an usb device flag instead, set it when usb-host looks at the device descriptors anyway. Also set it for emulated storage devices, for consistency. Add an inline helper function to check the flag. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Jose R. Ziviani <jziviani@suse.de> Message-Id: <20210624103836.2382472-32-kraxel@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-03-15usb: remove support for -usbdevice parametersPaolo Bonzini
No device needs them anymore and in fact they're undocumented. Remove the code. The only change in behavior is that "-usbdevice braille:hello" now reports an error, which is a bugfix. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210310173323.1422754-2-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15hw/usb/bus: Remove the "full-path" propertyThomas Huth
This property was only required for the pc-1.0 and earlier machine types. Since these have been removed now, we can delete the property as well. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210302120152.118042-1-thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-01-22usb: add pcap support.Gerd Hoffmann
Log all traffic of a specific usb device to a pcap file for later inspection. File format is compatible with linux usb monitor. Usage: qemu -device usb-${somedevice},pcap=file.pcap wireshark file.pcap Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210119194452.2148048-1-kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-06-15usb: usb_create() is now unused, dropMarkus Armbruster
Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-29-armbru@redhat.com>
2020-06-15usb: Convert uses of usb_create()Markus Armbruster
Replace dev = usb_create(bus, type_name); ... object_property_set_bool(OBJECT(dev), true, "realized", &err); by dev = isa_new(type_name); ... usb_realize_and_unref(dev, bus, &err); Recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-28-armbru@redhat.com>
2020-06-15usb: New usb_new(), usb_realize_and_unref()Markus Armbruster
I'm converting from qdev_create()/qdev_init_nofail() to qdev_new()/qdev_realize_and_unref(); recent commit "qdev: New qdev_new(), qdev_realize(), etc." explains why. USB devices use qdev_create() through usb_create(). Provide usb_new() and usb_realize_and_unref() for converting USB devices. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-27-armbru@redhat.com>
2020-06-12hw/usb: Move device-specific declarations to new 'hcd-musb.h' headerPhilippe Mathieu-Daudé
Move the declarations for the MUSB-HDRC USB2.0 OTG compliant core into a separate header. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200601141536.15192-3-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-15qdev: Unrealize must not failMarkus Armbruster
Devices may have component devices and buses. Device realization may fail. Realization is recursive: a device's realize() method realizes its components, and device_set_realized() realizes its buses (which should in turn realize the devices on that bus, except bus_set_realized() doesn't implement that, yet). When realization of a component or bus fails, we need to roll back: unrealize everything we realized so far. If any of these unrealizes failed, the device would be left in an inconsistent state. Must not happen. device_set_realized() lets it happen: it ignores errors in the roll back code starting at label child_realize_fail. Since realization is recursive, unrealization must be recursive, too. But how could a partly failed unrealize be rolled back? We'd have to re-realize, which can fail. This design is fundamentally broken. device_set_realized() does not roll back at all. Instead, it keeps unrealizing, ignoring further errors. It can screw up even for a device with no buses: if the lone dc->unrealize() fails, it still unregisters vmstate, and calls listeners' unrealize() callback. bus_set_realized() does not roll back either. Instead, it stops unrealizing. Fortunately, no unrealize method can fail, as we'll see below. To fix the design error, drop parameter @errp from all the unrealize methods. Any unrealize method that uses @errp now needs an update. This leads us to unrealize() methods that can fail. Merely passing it to another unrealize method cannot cause failure, though. Here are the ones that do other things with @errp: * virtio_serial_device_unrealize() Fails when qbus_set_hotplug_handler() fails, but still does all the other work. On failure, the device would stay realized with its resources completely gone. Oops. Can't happen, because qbus_set_hotplug_handler() can't actually fail here. Pass &error_abort to qbus_set_hotplug_handler() instead. * hw/ppc/spapr_drc.c's unrealize() Fails when object_property_del() fails, but all the other work is already done. On failure, the device would stay realized with its vmstate registration gone. Oops. Can't happen, because object_property_del() can't actually fail here. Pass &error_abort to object_property_del() instead. * spapr_phb_unrealize() Fails and bails out when remove_drcs() fails, but other work is already done. On failure, the device would stay realized with some of its resources gone. Oops. remove_drcs() fails only when chassis_from_bus()'s object_property_get_uint() fails, and it can't here. Pass &error_abort to remove_drcs() instead. Therefore, no unrealize method can fail before this patch. device_set_realized()'s recursive unrealization via bus uses object_property_set_bool(). Can't drop @errp there, so pass &error_abort. We similarly unrealize with object_property_set_bool() elsewhere, always ignoring errors. Pass &error_abort instead. Several unrealize methods no longer handle errors from other unrealize methods: virtio_9p_device_unrealize(), virtio_input_device_unrealize(), scsi_qdev_unrealize(), ... Much of the deleted error handling looks wrong anyway. One unrealize methods no longer ignore such errors: usb_ehci_pci_exit(). Several realize methods no longer ignore errors when rolling back: v9fs_device_realize_common(), pci_qdev_unrealize(), spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(), virtio_device_realize(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-17-armbru@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include exec/memory.h slightly lessMarkus Armbruster
Drop unnecessary inclusions from headers. Downgrade a few more to exec/hwaddr.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-17-armbru@redhat.com>
2019-01-11qemu/queue.h: simplify reverse access to QTAILQPaolo Bonzini
The new definition of QTAILQ does not require passing the headname, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-08usb: move ehci_create_ich9_with_companions to hw/i386Paolo Bonzini
This function is only needed when Q35 is in use. Moving it to the same file that uses it lets you disable the entire USB subsystem in x86_64-softmmu.mak; of course doing that will cause -usb to break horribly, but one thing at a time. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1545064358-4601-1-git-send-email-pbonzini@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-26usb: Remove legacy -usbdevice options (host, serial, disk and net)Thomas Huth
The option have been marked as deprecated since QEMU 2.10, and so far nobody complained that the host, serial, disk and net options are urgently required anymore. So let's now get rid at least of this legacy pile, to simplify the usb code quite a bit. This patch removes the usbdevices host, serial, disk and net. These devices use their own complicated parameter parsing mechanisms, so they are just ugly to maintain, without real benefit for the users (the users can use the corresponding "-device" parameters instead which have the same complexity as the "-usbdevice" devices here). Note that the other rather simple -usbdevice options (mouse, tablet, etc.) are not removed yet (the code is really simple here, so it does not hurt much to keep it), as well as the two devices "braille" and "bt" which are easier to use with -usbdevice than with -device. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1515519171-20315-1-git-send-email-thuth@redhat.com [kraxel] delete some usb_host_device_open() leftovers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-12-14hmp-commands: Remove the deprecated usb_add and usb_delThomas Huth
It's easy to use device_add and device_del as replacement instead. The usb_add and usb_del commands are deprecated since QEMU 2.10, and nobody complained that they are still needed, so let's get rid of them now to make the HMP interface a little bit less overloaded. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1512073140-17672-1-git-send-email-thuth@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-02-23usb: replace handle_destroy with unrealizeMarc-André Lureau
Curiously, unrealize() is not being used, but it seems more appropriate than handle_destroy() together with realize(). It is more ubiquitous destroy name in qemu code base and may throw errors. Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170221141451.28305-25-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-02-06usb: accept usb3 control requestsGerd Hoffmann
Windows 10 reportedly sends these, so accept them in case the device in question is a superspeed (usb3) device. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1485870727-21956-2-git-send-email-kraxel@redhat.com
2017-01-31hw/ppc/spapr: Fix boot path of usb-host storage devicesThomas Huth
When passing through an USB storage device to a pseries guest, it is currently not possible to automatically boot from the device if the "bootindex" property has been specified, too (e.g. when using "-device nec-usb-xhci -device usb-host,hostbus=1,hostaddr=2,bootindex=0" at the command line). The problem is that QEMU builds a device tree path like "/pci@800000020000000/usb@0/usb-host@1" and passes it to SLOF in the /chosen/qemu,boot-list property. SLOF, however, probes the USB device, recognizes that it is a storage device and thus changes its name to "storage", and additionally adds a child node for the SCSI LUN, so the correct boot path in SLOF is something like "/pci@800000020000000/usb@0/storage@1/disk@101000000000000" instead. So when we detect an USB mass storage device with SCSI interface, we've got to adjust the firmware boot-device path properly that SLOF can automatically boot from the device. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1354177 Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-22usb: Add QOM property "attached".Gerd Hoffmann
USB devices in attached state are visible to the guest. This patch adds a QOM property for this. Write access is opt-in per device. Some devices manage attached state automatically (usb-host, usb-serial, usb-redir), so we can't enable write access universally but have to do it on a case by case base. So far, no device opts in. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1465984019-28963-4-git-send-email-kraxel@redhat.com [ minor codestyle fix ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2016-06-22usb: make USBDevice->attached boolGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1465984019-28963-3-git-send-email-kraxel@redhat.com
2016-03-22include/qemu/iov.h: Don't include qemu-common.hMarkus Armbruster
qemu-common.h should only be included by .c files. Its file comment explains why: "No header file should depend on qemu-common.h, as this would easily lead to circular header dependencies." qemu/iov.h includes qemu-common.h for QEMUIOVector stuff. Move all that to qemu/iov.h and drop the ill-advised include. Include qemu/iov.h where the QEMUIOVector stuff is now missing. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30usb: Remove unused functionsThomas Huth
Delete set_usb_string(), usb_ep_get_ifnum(), usb_ep_get_max_packet_size() usb_ep_get_max_streams() and usb_ep_set_pipeline() since they are not used anymore. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-17usb: Propagate errors through usb_register_companion()Markus Armbruster
This loses the messages explaining the error printed with error_printf_unless_qmp(). The next commit will make up for the loss. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-02-18hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster
Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
2014-09-23usb-bus: introduce a wrapper function to check speedGonglei
In this way, we can check speed directly, don't need call usb_device_attach(), which has other conditions, such as checking the chardev is open. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23usb-bus: remove "init" from USBDeviceClass structGonglei
All usb-bus devices are realized by realize(), remove init callback function from USBDeviceClass struct. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23usb-bus: convert USBDeviceClass init to realizeGonglei
Add "realize/unrealize" in USBDeviceClass, which has errp as a parameter. So all the implementations now use error_setg instead of error_report for reporting error. Note: this patch still keep "init" in USBDeviceClass, and call kclass->init in usb_device_realize(), avoid breaking git bisect. After realize all usb devices, will be removed. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-29usb: add usb_bus_release functionGonglei
add global variables releasing logic when the usb buses were removed or hot-unpluged. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-08-09hw/timer: Move extern declaration from .c to .h fileStefan Weil
This fixes a warning from smatch (static code analyser). Fix also the comment with the renamed source file name. Signed-off-by: Stefan Weil <sw@weilnetz.de> hw/timer/tusb6010.c | 3 --- include/hw/usb.h | 7 ++++++- 2 files changed, 6 insertions(+), 4 deletions(-) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-02usb: add usb_pick_speedGerd Hoffmann
We can pick the usb port speed in generic code, by looking at the port and device speed masks and looking for the fastest match. So add a function to do exactly that, and drop the speed setting code from usb_desc_attach as it isn't needed any more. This way we can set the device speed before calling port->ops->attach, which fixes some xhci hotplug issues. https://bugzilla.redhat.com/show_bug.cgi?id=1046873 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-18usb: Remove magic constants from device bmAttributesPantelis Koukousoulas
Replace magic constants in device bmAttributes with symbolic ones from Linux kernel ch9.h Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-01-16usb: add support for microsoft os descriptorsGerd Hoffmann
This patch adds support for special usb descriptors used by microsoft windows. They allow more fine-grained control over driver binding and adding entries to the registry for configuration. As this is a guest-visible change the "msos-desc" compat property has been added to turn this off for 1.7 + older Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-28usb: add vendor request definesGerd Hoffmann
Add defines for vendor specific usb control requests. Group defines by Device / Interface / Endpoint while being at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-26usb: Add usb_device_alloc/free_streamsHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-11-26usb: Add max_streams attribute to endpoint infoHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-09-10Remove dev-bluetooth.c dependency from vl.cMiroslav Rezanina
Use usb_legacy_register handling to create bt-dongle device and remove code dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-08-30usb: Pass size to usb_bus_new()Andreas Färber
To be passed to qbus_create_inplace(). Use DEVICE() cast to avoid a direct parent field access. Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-24usb: add serial bus propertyGerd Hoffmann
This patch adds a serial property for all usb devices, which can be used to set the serial number of a usb device (as listed by lsusb -v) to a specific value. Applies to emulated devices only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-08Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori
# By Paolo Bonzini # Via Paolo Bonzini * bonzini/hw-dirs: (35 commits) hw: move private headers to hw/ subdirectories. MAINTAINERS: update for source code movement hw: move last file to hw/arm/ hw: move hw/kvm/ to hw/i386/kvm hw: move ARM CPU cores to hw/cpu/, configure with default-configs/ hw: move other devices to hw/misc/, configure with default-configs/ hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/ hw: move GPIO interfaces to hw/gpio/, configure with default-configs/ hw: move interrupt controllers to hw/intc/, configure with default-configs/ hw: move DMA controllers to hw/dma/, configure with default-configs/ hw: move VFIO and ivshmem to hw/misc/ hw: move PCI bridges to hw/pci-* or hw/ARCH hw: move SD/MMC devices to hw/sd/, configure with default-configs/ hw: move timer devices to hw/timer/, configure with default-configs/ hw: move ISA bridges and devices to hw/isa/, configure with default-configs/ hw: move char devices to hw/char/, configure via default-configs/ hw: move more files to hw/xen/ hw: move SCSI controllers to hw/scsi/, configure via default-configs/ hw: move SSI controllers to hw/ssi/, configure via default-configs/ hw: move I2C controllers to hw/i2c/, configure via default-configs/ ... Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 17:50:05 +0000