summaryrefslogtreecommitdiff
path: root/include/hw/sd
AgeCommit message (Collapse)Author
2020-03-12hw/arm/allwinner: add SD/MMC host controllerNiek Linnenbank
The Allwinner System on Chip families sun4i and above contain an integrated storage controller for Secure Digital (SD) and Multi Media Card (MMC) interfaces. This commit adds support for the Allwinner SD/MMC storage controller with the following emulated features: * DMA transfers * Direct FIFO I/O * Short/Long format command responses * Auto-Stop command (CMD12) * Insert & remove card detection The following boards are extended with the SD host controller: * Cubieboard (hw/arm/cubieboard.c) * Orange Pi PC (hw/arm/orangepi.c) Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200311221854.30370-9-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-30hw/sd: Configure number of slots exposed by the ASPEED SDHCI modelAndrew Jeffery
The AST2600 includes a second cut-down version of the SD/MMC controller found in the AST2500, named the eMMC controller. It's cut down in the sense that it only supports one slot rather than two, but it brings the total number of slots supported by the AST2600 to three. The existing code assumed that the SD controller always provided two slots. Rework the SDHCI object to expose the number of slots as a property to be set by the SoC configuration. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20200114103433.30534-2-clg@kaod.org [PMM: fixed up to use device_class_set_props()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-22hw/sd/sdhci: Add dummy Samsung SDHCI controllerPhilippe Mathieu-Daudé
The Linux kernel access few S3C-specific registers [1] to set some clock. We don't care about this part for device emulation [2]. Add a dummy device to properly ignore these accesses, so we can focus on the important registers missing. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mmc/host/sdhci-s3c-regs.h?h=cc014f3 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/mmc/host/sdhci-s3c.c?h=v5.3#n263 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20191005154748.21718-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15hw/sd/aspeed_sdhci: New deviceEddie James
The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2018-06-08sdcard: Reflect when the Spec v3 is supported in the Config Register (SCR)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-08sdcard: Add a 'spec_version' property, default to Spec v2.00Philippe Mathieu-Daudé
As of this commit, the Spec v1 is not working, and all controllers expect the cards to be conformant to Spec v2. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20180607180641.874-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22sdcard: use the registerfields API to access the OCR registerPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180215220540.6556-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13sdhci: implement CMD/DAT[] fields in the Present State registerPhilippe Mathieu-Daudé
[based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-23-f4bug@amsat.org>
2018-02-13sdhci: implement UHS-I voltage switchPhilippe Mathieu-Daudé
[based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-22-f4bug@amsat.org>
2018-02-13sdhci: implement the Host Control 2 register (tuning sequence)Philippe Mathieu-Daudé
[based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2015.2] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-20-f4bug@amsat.org>
2018-02-13sdhci: rename the hostctl1 registerPhilippe Mathieu-Daudé
As per the Spec v3.00 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-19-f4bug@amsat.org>
2018-02-13sdhci: add a 'spec_version property' (default to v2)Philippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180208164818.7961-8-f4bug@amsat.org>
2018-02-09sdhci: Add i.MX specific subtype of SDHCIAndrey Smirnov
IP block found on several generations of i.MX family does not use vanilla SDHCI implementation and it comes with a number of quirks. Introduce i.MX SDHCI subtype of SDHCI block to add code necessary to support unmodified Linux guest driver. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Jason Wang <jasowang@redhat.com> Cc: Philippe Mathieu-Daudé <f4bug@amsat.org> Cc: Marcel Apfelbaum <marcel.apfelbaum@zoho.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-devel@nongnu.org Cc: qemu-arm@nongnu.org Cc: yurovsky@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMM: define and use ESDHC_UNDOCUMENTED_REG27] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-25sdhci: fix a NULL pointer dereference due to uninitialized AddresSpace objectPhilippe Mathieu-Daudé
missed in 60765b6ceeb4. Thread 1 "qemu-system-aarch64" received signal SIGSEGV, Segmentation fault. address_space_init (as=0x0, root=0x55555726e410, name=name@entry=0x555555e3f0a7 "sdhci-dma") at memory.c:3050 3050 as->root = root; (gdb) bt #0 address_space_init (as=0x0, root=0x55555726e410, name=name@entry=0x555555e3f0a7 "sdhci-dma") at memory.c:3050 #1 0x0000555555af62c3 in sdhci_sysbus_realize (dev=<optimized out>, errp=0x7fff7f931150) at hw/sd/sdhci.c:1564 #2 0x00005555558b25e5 in zynqmp_sdhci_realize (dev=0x555557051520, errp=0x7fff7f931150) at hw/sd/zynqmp-sdhci.c:151 #3 0x0000555555a2e7f3 in device_set_realized (obj=0x555557051520, value=<optimized out>, errp=0x7fff7f931270) at hw/core/qdev.c:966 #4 0x0000555555ba3f74 in property_set_bool (obj=0x555557051520, v=<optimized out>, name=<optimized out>, opaque=0x555556e04a20, errp=0x7fff7f931270) at qom/object.c:1906 #5 0x0000555555ba51f4 in object_property_set (obj=obj@entry=0x555557051520, v=v@entry=0x5555576dbd60, name=name@entry=0x555555dd6306 "realized", errp=errp@entry=0x7fff7f931270) at qom/object.c:1102 Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180123132051.24448-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16sdhci: add a 'dma' property to the sysbus devicesPhilippe Mathieu-Daudé
Add a 'dma' property allowing machine creation to provide the address-space SDHCI DMA operates on. [based on a patch from Alistair Francis <alistair.francis@xilinx.com> from qemu/xilinx tag xilinx-v2016.1] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180115182436.2066-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16sdhci: fix the PCI device, using the PCI address space for DMAPhilippe Mathieu-Daudé
While SysBus devices can use the get_system_memory() address space, PCI devices should use the bus master address space for DMA. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20180115182436.2066-14-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16sdhci: fix CAPAB/MAXCURR registers, both are 64bit and read-onlyPhilippe Mathieu-Daudé
running qtests: $ make check-qtest-arm GTESTER check-qtest-arm SDHC rd_4b @0x44 not implemented SDHC wr_4b @0x40 <- 0x89abcdef not implemented SDHC wr_4b @0x44 <- 0x01234567 not implemented Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180115182436.2066-12-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16sdhci: use DEFINE_SDHCI_COMMON_PROPERTIES() for common sysbus/pci propertiesPhilippe Mathieu-Daudé
Add common/sysbus/pci/sdbus comments to have clearer code blocks separation. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180115182436.2066-4-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16sdhci: remove dead codePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180115182436.2066-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-16sdhci: clean up includesPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 20180115182436.2066-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28hw/sd: add card-reparenting functionClement Deschamps
Provide a new function sdbus_reparent_card() in sd core for reparenting a card from a SDBus to another one. This function is required by the raspi platform, where the two SD controllers can be dynamically switched. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1488293711-14195-3-git-send-email-peter.maydell@linaro.org Message-id: 20170224164021.9066-3-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added a doc comment to the header file; changed to use new behaviour of qdev_set_parent_bus()] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-28bcm2835_sdhost: add bcm2835 sdhost controllerClement Deschamps
This adds the BCM2835 SDHost controller from Arasan. Signed-off-by: Clement Deschamps <clement.deschamps@antfield.fr> Message-id: 20170224164021.9066-2-clement.deschamps@antfield.fr Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12Clean up ill-advised or unusual header guardsMarkus Armbruster
Cleaned up with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-26sdhci: add quirk property for card insert interrupt status on Raspberry PiAndrew Baumann
This quirk is a workaround for the following hardware behaviour, on which UEFI (specifically, the bootloader for Windows on Pi2) depends: 1. at boot with an SD card present, the interrupt status/enable registers are initially zero 2. upon enabling it in the interrupt enable register, the card insert bit in the interrupt status register is immediately set 3. after a subsequent controller reset, the card insert interrupt does not fire, even if enabled in the interrupt enable register Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26sdhci: Revert "add optional quirk property to disable card insertion/removal ↵Andrew Baumann
interrupts" This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d. This change was poorly tested on my part. It squelched card insertion interrupts on reset, but that was not necessary because sdhci_reset() clears all the registers (via the call to memset), so the subsequent sdhci_insert_eject_cb() call never sees the card insert interrupt enabled. However, not calling the insert_eject_cb results in prnsts remaining 0, when it actually needs to be updated to indicate card presence and R/O status. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/sd/sdhci.c: Update to use SDBus APIsPeter Maydell
Update the SDHCI code to use the new SDBus APIs. This commit introduces the new command line options required to connect a disk to sdhci-pci: -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-6-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd: Add QOM bus which SD cards plug in toPeter Maydell
Add a QOM bus for SD cards to plug in to. Note that since sd_enable() is used only by one board and there only as part of a broken implementation, we do not provide it in the SDBus API (but instead add a warning comment about the old function). Whoever converts OMAP and the nseries boards to QOM will need to either implement the card switch properly or move the enable hack into the OMAP MMC controller model. In the SDBus API, the old-style use of sd_set_cb to register some qemu_irqs for notification of card insertion and write-protect toggling is replaced with methods in the SDBusClass which the card calls on status changes and methods in the SDClass which the controller can call to find out the current status. The query methods will allow us to remove the abuse of the 'register irqs' API by controllers in their reset methods to trigger the card to tell them about the current status again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-5-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/sd.c: QOMifyPeter Maydell
Turn the SD card into a QOM device. This conversion only changes the device itself; the various functions which are effectively methods on the device are not touched at this point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-3-git-send-email-peter.maydell@linaro.org
2015-12-22sdhci: add optional quirk property to disable card insertion/removal interruptsAndrew Baumann
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC controller, where the card insert bit is documented as unimplemented (always reads zero, doesn't generate interrupts) but is in fact observed on hardware as set at power on, but is cleared (and remains clear) on subsequent controller resets. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-07sdhci: Sanitize "sdhci-pci" properties for future qomificationMarkus Armbruster
We currently fuse controller and card into a single device model, but we intend qomify things properly and separate the two. The properties that really belong to the card would then have to somehow pass-through to the card's properties. To avoid that complication, either mark them experimental or drop them. Properties "capareg", "maxcurr" and the usual PCI device properties belong to the controller. Property "drive" belongs to the card; rename it to "x-drive". Properties "logical_block_size", "physical_block_size", "min_io_size", "opt_io_size", "discard_granularity" belong to the card, but have no effect; drop them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29sdhci: Split sdhci.h for public and internal device usageSai Pavan Boddu
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and internal version (i.e hw/sd/sdhci-interna.h) based on register declarations and object declaration. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29sd.h: Move sd.h to include/hw/sd/Sai Pavan Boddu
Create a sd directory under include/hw/ and move sd.h to include/hw/sd/ Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 11:45:41 +0000