summaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2021-03-15pvrdma: wean code off pvrdma_ring.h kernel headerCornelia Huck
The pvrdma code relies on the pvrdma_ring.h kernel header for some basic ring buffer handling. The content of that header isn't very exciting, but contains some (q)atomic_*() invocations that (a) cause manual massaging when doing a headers update, and (b) are an indication that we probably should not be importing that header at all. Let's reimplement the ring buffer handling directly in the pvrdma code instead. This arguably also improves readability of the code. Importing the header can now be dropped. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15lan9118: switch to use qemu_receive_packet() for loopbackAlexander Bulekov
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15cadence_gem: switch to use qemu_receive_packet() for loopbackAlexander Bulekov
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15pcnet: switch to use qemu_receive_packet() for loopbackAlexander Bulekov
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1917085 Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15rtl8139: switch to use qemu_receive_packet() for loopbackAlexander Bulekov
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1910826 Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15tx_pkt: switch to use qemu_receive_packet_iov() for loopbackJason Wang
This patch switches to use qemu_receive_receive_iov() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15sungem: switch to use qemu_receive_packet() for loopbackJason Wang
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15msf2-mac: switch to use qemu_receive_packet() for loopbackJason Wang
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15dp8393x: switch to use qemu_receive_packet() for loopback packetJason Wang
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15e1000: switch to use qemu_receive_packet() for loopbackJason Wang
This patch switches to use qemu_receive_packet() which can detect reentrancy and return early. This is intended to address CVE-2021-3416. Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15e1000: fail early for evil descriptorJason Wang
During procss_tx_desc(), driver can try to chain data descriptor with legacy descriptor, when will lead underflow for the following calculation in process_tx_desc() for bytes: if (tp->size + bytes > msh) bytes = msh - tp->size; This will lead a infinite loop. So check and fail early if tp->size if greater or equal to msh. Reported-by: Alexander Bulekov <alxndr@bu.edu> Reported-by: Cheolwoo Myung <cwmyung@snu.ac.kr> Reported-by: Ruhr-University Bochum <bugs-syssec@rub.de> Cc: Prasad J Pandit <ppandit@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-15virtio-net: calculating proper msix vectors on initJason Wang
Currently, the default msix vectors for virtio-net-pci is 3 which is obvious not suitable for multiqueue guest, so we depends on the user or management tools to pass a correct vectors parameter. In fact, we can simplifying this by calculating the number of vectors on realize. Consider we have N queues, the number of vectors needed is 2*N + 2 (#queue pairs + plus one config interrupt and control vq). We didn't check whether or not host support control vq because it was added unconditionally by qemu to avoid breaking legacy guests such as Minix. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-03-14Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210314' into staging target-arm queue: * versal: Support XRAMs and XRAM controller * smmu: Various minor bug fixes * SVE emulation: fix bugs handling odd vector lengths * allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC register value * tests/acceptance: fix orangepi-pc acceptance tests * hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() * hw/arm/virt: KVM: The IPA lower bound is 32 * npcm7xx: support MFT module * pl110, pxa2xx_lcd: tidy up template headers # gpg: Signature made Sun 14 Mar 2021 13:17:43 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210314: (39 commits) hw/display/pxa2xx: Inline template header hw/display/pxa2xx: Apply whitespace-only coding style fixes to template header hw/display/pxa2xx: Apply brace-related coding style fixes to template header hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.h hw/display/pxa2xx_lcd: Remove dest_width state field hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfaces hw/display/pl110: Remove use of BITS from pl110_template.h hw/display/pl110: Pull included-once parts of template header into pl110.c hw/display/pl110: Remove dead code for non-32-bpp surfaces tests/qtest: Test PWM fan RPM using MFT in PWM test hw/arm: Connect PWM fans in NPCM7XX boards hw/arm: Add MFT device to NPCM7xx Soc hw/misc: Add NPCM7XX MFT Module hw/misc: Add GPIOs for duty in NPCM7xx PWM hw/arm/virt: KVM: The IPA lower bound is 32 accel: kvm: Fix kvm_type invocation hw/timer/sse-timer: Propagate eventual error in sse_timer_realize() tests/acceptance: drop ARMBIAN_ARTIFACTS_CACHED condition for orangepi-pc, cubieboard tests tests/acceptance: update sunxi kernel from armbian to 5.10.16 tests/acceptance/boot_linux_console: change URL for test_arm_orangepi_bionic_20_08 ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-14hw/display/pxa2xx: Inline template headerPeter Maydell
The template header is now included only once; just inline its contents in hw/display/pxa2xx_lcd.c. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-10-peter.maydell@linaro.org
2021-03-14hw/display/pxa2xx: Apply whitespace-only coding style fixes to template headerPeter Maydell
We're about to move code from the template header into pxa2xx_lcd.c. Before doing that, make coding style fixes so checkpatch doesn't complain about the patch which moves the code. This commit is whitespace changes only: * avoid hard-coded tabs * fix ident on function prototypes * no newline before open brace on array definitions Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-9-peter.maydell@linaro.org
2021-03-14hw/display/pxa2xx: Apply brace-related coding style fixes to template headerPeter Maydell
We're about to move code from the template header into pxa2xx_lcd.c. Before doing that, make coding style fixes so checkpatch doesn't complain about the patch which moves the code. This commit fixes missing braces in the SKIP_PIXEL() macro definition and in if() statements. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-8-peter.maydell@linaro.org
2021-03-14hw/display/pxa2xx: Remove use of BITS in pxa2xx_template.hPeter Maydell
Now that BITS is always 32, expand out all its uses in the template header, including removing now-useless uses of the glue() macro. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-7-peter.maydell@linaro.org
2021-03-14hw/display/pxa2xx_lcd: Remove dest_width state fieldPeter Maydell
Since the dest_width is now always 4 because the output surface is 32bpp, we can replace the dest_width state field with a constant. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-6-peter.maydell@linaro.org
2021-03-14hw/display/pxa2xx_lcd: Remove dead code for non-32-bpp surfacesPeter Maydell
For a long time now the UI layer has guaranteed that the console surface is always 32 bits per pixel. Remove the legacy dead code from the pxa2xx_lcd display device which was handling the possibility that the console surface was some other format. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-5-peter.maydell@linaro.org
2021-03-14hw/display/pl110: Remove use of BITS from pl110_template.hPeter Maydell
BITS is always 32, so remove all uses of it from the template header, by dropping the trailing '32' from the draw function names and not constructing the name of rgb_to_pixel32() via the glue() macro. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-4-peter.maydell@linaro.org
2021-03-14hw/display/pl110: Pull included-once parts of template header into pl110.cPeter Maydell
The pl110_template.h header has a doubly-nested multiple-include pattern: * pl110.c includes it once for each host bit depth (now always 32) * every time it is included, it includes itself 6 times, to account for multiple guest device pixel and byte orders Now we only have to deal with 32-bit host bit depths, we can move the code corresponding to the outer layer of this double-nesting to be directly in pl110.c and reduce the template header to a single layer of nesting. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-3-peter.maydell@linaro.org
2021-03-14hw/display/pl110: Remove dead code for non-32-bpp surfacesPeter Maydell
For a long time now the UI layer has guaranteed that the console surface is always 32 bits per pixel. Remove the legacy dead code from the pl110 display device which was handling the possibility that the console surface was some other format. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20210211141515.8755-2-peter.maydell@linaro.org
2021-03-12hw/arm: Connect PWM fans in NPCM7XX boardsHao Wu
This patch adds fan_splitters (split IRQs) in NPCM7XX boards. Each fan splitter corresponds to 1 PWM output and can connect to multiple fan inputs (MFT devices). In NPCM7XX boards(NPCM750 EVB and Quanta GSJ boards), we initializes these splitters and connect them to their corresponding modules according their specific device trees. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-5-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: Add MFT device to NPCM7xx SocHao Wu
This patch adds the recently implemented MFT device to the NPCM7XX SoC file. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-4-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add NPCM7XX MFT ModuleHao Wu
This patch implements Multi Function Timer (MFT) module for NPCM7XX. This module is mainly used to configure PWM fans. It has just enough functionality to make the PWM fan kernel module work. The module takes two input, the max_rpm of a fan (modifiable via QMP) and duty cycle (a GPIO from the PWM module.) The actual measured RPM is equal to max_rpm * duty_cycle / NPCM7XX_PWM_MAX_DUTY. The RPM is measured as a counter compared to a prescaled input clock. The kernel driver reads this counter and report to user space. Refs: https://github.com/torvalds/linux/blob/master/drivers/hwmon/npcm750-pwm-fan.c Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Message-id: 20210311180855.149764-3-wuhaotsh@google.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: Add GPIOs for duty in NPCM7xx PWMHao Wu
This patch adds GPIOs in NPCM7xx PWM module for its duty values. The purpose of this is to connect it to the MFT module to provide an input for measuring a PWM fan's RPM. Each PWM module has NPCM7XX_PWM_PER_MODULE of GPIOs, each one corresponds to one PWM instance and can connect to multiple fan instances in MFT. Reviewed-by: Doug Evans <dje@google.com> Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210311180855.149764-2-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/virt: KVM: The IPA lower bound is 32Andrew Jones
The virt machine already checks KVM_CAP_ARM_VM_IPA_SIZE to get the upper bound of the IPA size. If that bound is lower than the highest possible GPA for the machine, then QEMU will error out. However, the IPA is set to 40 when the highest GPA is less than or equal to 40, even when KVM may support an IPA limit as low as 32. This means KVM may fail the VM creation unnecessarily. Additionally, 40 is selected with the value 0, which means use the default, and that gets around a check in some versions of KVM, causing a difficult to debug fail. Always use the IPA size that corresponds to the highest possible GPA, unless it's lower than 32, in which case use 32. Also, we must still use 0 when KVM only supports the legacy fixed 40 bit IPA. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Message-id: 20210310135218.255205-3-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/timer/sse-timer: Propagate eventual error in sse_timer_realize()Philippe Mathieu-Daudé
If the SSECounter link is absent, we set an error message in sse_timer_realize() but forgot to propagate this error. Add the missing 'return'. Fixes: CID 1450755 (Null pointer dereferences) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210312001845.1562670-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/net/allwinner-sun8i-emac: traverse transmit queue using TX_CUR_DESC ↵Niek Linnenbank
register value Currently the emulated EMAC for sun8i always traverses the transmit queue from the head when transferring packets. It searches for a list of consecutive descriptors whichs are flagged as ready for processing and transmits their payloads accordingly. The controller stops processing once it finds a descriptor that is not marked ready. While the above behaviour works in most situations, it is not the same as the actual EMAC in hardware. Actual hardware uses the TX_CUR_DESC register value to keep track of the last position in the transmit queue and continues processing from that position when software triggers the start of DMA processing. The currently emulated behaviour can lead to packet loss on transmit when software fills the transmit queue with ready descriptors that overlap the tail of the circular list. This commit modifies the emulated EMAC for sun8i such that it processes the transmit queue using the TX_CUR_DESC register in the same way as hardware. Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210310195820.21950-2-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmuv3: Uniformize sid tracesEric Auger
Convert all sid printouts to sid=0x%x. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210309102742.30442-8-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmuv3: Fix SMMU_CMD_CFGI_STE_RANGE handlingEric Auger
If the whole SID range (32b) is invalidated (SMMU_CMD_CFGI_ALL), @end overflows and we fail to handle the command properly. Once this gets fixed, the current code really is awkward in the sense it loops over the whole range instead of removing the currently cached configs through a hash table lookup. Fix both the overflow and the lookup. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210309102742.30442-7-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmuv3: Enforce invalidation on a power of two rangeEric Auger
As of today, the driver can invalidate a number of pages that is not a power of 2. However IOTLB unmap notifications and internal IOTLB invalidations work with masks leading to erroneous invalidations. In case the range is not a power of 2, split invalidations into power of 2 invalidations. When looking for a single page entry in the vSMMU internal IOTLB, let's make sure that if the entry is not found using a g_hash_table_remove() we iterate over all the entries to find a potential range that overlaps it. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210309102742.30442-6-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm/smmu-common: Fix smmu_iotlb_inv_iova when asid is not setEric Auger
If the asid is not set, do not attempt to locate the key directly as all inserted keys have a valid asid. Use g_hash_table_foreach_remove instead. Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-id: 20210309102742.30442-5-eric.auger@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12virtio-iommu: Handle non power of 2 range invalidationsEric Auger
Unmap notifiers work with an address mask assuming an invalidation range of a power of 2. Nothing mandates this in the VIRTIO-IOMMU spec. So in case the range is not a power of 2, split it into several invalidations. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20210309102742.30442-4-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12dma: Introduce dma_aligned_pow2_mask()Eric Auger
Currently get_naturally_aligned_size() is used by the intel iommu to compute the maximum invalidation range based on @size which is a power of 2 while being aligned with the @start address and less than the maximum range defined by @gaw. This helper is also useful for other iommu devices (virtio-iommu, SMMUv3) to make sure IOMMU UNMAP notifiers only are called with power of 2 range sizes. Let's move this latter into dma-helpers.c and rename it into dma_aligned_pow2_mask(). Also rewrite the helper so that it accomodates UINT64_MAX values for the size mask and max mask. It now returns a mask instead of a size. Change the caller. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-id: 20210309102742.30442-3-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12intel_iommu: Fix mask may be uninitialized in vtd_context_device_invalidateEric Auger
With -Werror=maybe-uninitialized configuration we get ../hw/i386/intel_iommu.c: In function ‘vtd_context_device_invalidate’: ../hw/i386/intel_iommu.c:1888:10: error: ‘mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] 1888 | mask = ~mask; | ~~~~~^~~~~~~ Add a g_assert_not_reached() to avoid the error. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210309102742.30442-2-eric.auger@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/arm: versal: Add support for the XRAMsEdgar E. Iglesias
Connect the support for the Versal Accelerator RAMs (XRAMs). Reviewed-by: Luc Michel <luc@lmichel.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-3-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12hw/misc: versal: Add a model of the XRAM controllerEdgar E. Iglesias
Add a model of the Xilinx Versal Accelerator RAM (XRAM). This is mainly a stub to make firmware happy. The size of the RAMs can be probed. The interrupt mask logic is modelled but none of the interrups will ever be raised unless injected. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20210308224637.2949533-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-12Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-6.0-20210310' ↵Peter Maydell
into staging ppc patch queue for 2021-03-10 Next batch of patches for the ppc target and machine types. Includes: * Several cleanups for sm501 from Peter Maydell * An update to the SLOF guest firmware * Improved handling of hotplug failures in spapr, associated cleanups to the hotplug handling code * Several etsec fixes and cleanups from Bin Meng * Assorted other fixes and cleanups # gpg: Signature made Wed 10 Mar 2021 04:08:53 GMT # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dg-gitlab/tags/ppc-for-6.0-20210310: spapr.c: send QAPI event when memory hotunplug fails spapr.c: remove duplicated assert in spapr_memory_unplug_request() target/ppc: fix icount support on Book-e vms accessing SPRs qemu_timer.c: add timer_deadline_ms() helper spapr_pci.c: add 'unplug already in progress' message for PCI unplug spapr.c: add 'unplug already in progress' message for PHB unplug hw/ppc: e500: Add missing <ranges> in the eTSEC node hw/net: fsl_etsec: Fix build error when HEX_DUMP is on spapr_drc.c: use DRC reconfiguration to cleanup DIMM unplug state spapr_drc.c: add hotunplug timeout for CPUs spapr_drc.c: introduce unplug_timeout_timer target/ppc: Fix bcdsub. emulation when result overflows docs/system: Extend PPC section spapr: rename spapr_drc_detach() to spapr_drc_unplug_request() spapr_drc.c: use spapr_drc_release() in isolate_physical/set_unusable pseries: Update SLOF firmware image spapr_drc.c: do not call spapr_drc_detach() in drc_isolate_logical() hw/display/sm501: Inline template header into C file hw/display/sm501: Expand out macros in template header hw/display/sm501: Remove dead code for non-32-bit RGB surfaces Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-6.0-pull-request' into staging Pull request # gpg: Signature made Wed 10 Mar 2021 21:56:09 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-6.0-pull-request: (22 commits) sysemu: Let VMChangeStateHandler take boolean 'running' argument sysemu/runstate: Let runstate_is_running() return bool hw/lm32/Kconfig: Have MILKYMIST select LM32_DEVICES hw/lm32/Kconfig: Rename CONFIG_LM32 -> CONFIG_LM32_DEVICES hw/lm32/Kconfig: Introduce CONFIG_LM32_EVR for lm32-evr/uclinux boards qemu-common.h: Update copyright string to 2021 tests/fp/fp-test: Replace the word 'blacklist' qemu-options: Replace the word 'blacklist' seccomp: Replace the word 'blacklist' scripts/tracetool: Replace the word 'whitelist' ui: Replace the word 'whitelist' virtio-gpu: Adjust code space style exec/memory: Use struct Object typedef fuzz-test: remove unneccessary debugging flags net: Use id_generate() in the network subsystem, too MAINTAINERS: Fix the location of tools manuals vhost_user_gpu: Drop dead check for g_malloc() failure backends/dbus-vmstate: Fix short read error handling target/hexagon/gen_tcg_funcs: Fix a typo hw/elf_ops: Fix a typo ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2' into staging Testing, guest-loader and other misc tweaks - add warning text to quickstart example - add CFI tests to CI - use --arch-only for docker pre-requisites - fix .editorconfig for emacs - add guest-loader for Xen-like hypervisor testing - move generic-loader docs into manual proper - move semihosting out of hw/ # gpg: Signature made Wed 10 Mar 2021 15:35:31 GMT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-docs-xen-updates-100321-2: semihosting: Move hw/semihosting/ -> semihosting/ semihosting: Move include/hw/semihosting/ -> include/semihosting/ tests/avocado: add boot_xen tests docs: add some documentation for the guest-loader docs: move generic-loader documentation into the main manual hw/core: implement a guest-loader to support static hypervisor guests device_tree: add qemu_fdt_setprop_string_array helper hw/riscv: migrate fdt field to generic MachineState hw/board: promote fdt from ARM VirtMachineState to MachineState .editorconfig: update the automatic mode setting for Emacs tests/docker: Use --arch-only when building Debian cross image gitlab-ci.yml: Add jobs to test CFI flags gitlab-ci.yml: Allow custom # of parallel linkers tests/docker: add a test-tcg for building then running check-tcg docs/system: add a gentle prompt for the complexity to come Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-11Merge remote-tracking branch 'remotes/legoater/tags/pull-aspeed-20210309' ↵Peter Maydell
into staging Aspeed patches : * New model for the Aspeed LPC controller * Misc cleanups # gpg: Signature made Tue 09 Mar 2021 11:54:25 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * remotes/legoater/tags/pull-aspeed-20210309: hw/misc: Model KCS devices in the Aspeed LPC controller hw/misc: Add a basic Aspeed LPC controller model hw/arm: ast2600: Correct the iBT interrupt ID hw/arm: ast2600: Set AST2600_MAX_IRQ to value from datasheet hw/arm: ast2600: Force a multiple of 32 of IRQs for the GIC hw/arm/aspeed: Fix location of firmware images in documentation arm/ast2600: Fix SMP booting with -kernel Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10Merge remote-tracking branch 'remotes/nvme/tags/nvme-next-pull-request' into ↵Peter Maydell
staging hw/block/nvme updates * NVMe subsystem support (`-device nvme-subsys`) (Minwoo Im) * Namespace (De|At)tachment support (Minwoo Im) * Simple Copy command support (Klaus Jensen) * Flush broadcast support (Gollu Appalanaidu) * QEMUIOVector/QEMUSGList duality refactoring (Klaus Jensen) plus various fixes from Minwoo, Gollu, Dmitry and me. v2: - add `nqn` nvme-subsys device parameter instead of using `id`. (Paolo) # gpg: Signature made Tue 09 Mar 2021 11:44:17 GMT # gpg: using RSA key 522833AA75E2DCE6A24766C04DE1AF316D4F0DE9 # gpg: Good signature from "Klaus Jensen <its@irrelevant.dk>" [unknown] # gpg: aka "Klaus Jensen <k.jensen@samsung.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: DDCA 4D9C 9EF9 31CC 3468 4272 63D5 6FC5 E55D A838 # Subkey fingerprint: 5228 33AA 75E2 DCE6 A247 66C0 4DE1 AF31 6D4F 0DE9 * remotes/nvme/tags/nvme-next-pull-request: (38 commits) hw/block/nvme: support Identify NS Attached Controller List hw/block/nvme: support changed namespace asynchronous event hw/block/nvme: support namespace attachment command hw/block/nvme: refactor nvme_select_ns_iocs hw/block/nvme: support allocated namespace type hw/block/nvme: fix allocated namespace list to 256 hw/block/nvme: fix namespaces array to 1-based hw/block/nvme: support namespace detach hw/block/nvme: refactor nvme_dma hw/block/nvme: remove the req dependency in map functions hw/block/nvme: try to deal with the iov/qsg duality hw/block/nvme: fix strerror printing hw/block/nvme: remove block accounting for write zeroes hw/block/nvme: remove redundant len member in compare context hw/block/nvme: report non-mdts command size limit for dsm hw/block/nvme: add trace event for zone read check hw/block/nvme: fix potential compilation error hw/block/nvme: add identify trace event hw/block/nvme: remove unnecessary endian conversion hw/block/nvme: align zoned.zasl with mdts ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/thuth-gitlab/tags/pull-request-2021-03-09' into staging * Add some missing gitlab-CI job dependencies * Re-enable "make check SPEED=slow" * Improve the gitlab-pipeline-status script * Clean up inclusing of qtest.h headers * Improve libqos/qgraph documentation * Fix downloading problem in the acceptance tests * Remove deprecated target tilegx * Add new bsd-user maintainers # gpg: Signature made Tue 09 Mar 2021 10:27:29 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/pull-request-2021-03-09: bsd-user: Add new maintainers Remove deprecated target tilegx Acceptance Tests: restore filtering of tests by target arch Acceptance Tests: restore downloading of VM images docs/devel/qgraph: improve qgraph documentation libqos/qgraph: format qgraph comments for sphinx documentation scripts/ci/gitlab-pipeline-status: give more info when pipeline not found scripts/ci/gitlab-pipeline-status: give more information on failures scripts/ci/gitlab-pipeline-status: split utlity function for HTTP GET meson: Re-enable the possibility to run "make check SPEED=slow" docker: OpenSBI build job depends on OpenSBI container docker: EDK2 build job depends on EDK2 container docker: Alpine build job depends on Alpine container qtest: delete superfluous inclusions of qtest.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-10semihosting: Move hw/semihosting/ -> semihosting/Philippe Mathieu-Daudé
With the exception of hw/core/, the hw/ directory only contains device models used in system emulation. Semihosting is also used by user emulation. As a generic feature, move it out of hw/ directory. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-3-f4bug@amsat.org> Message-Id: <20210305135451.15427-3-alex.bennee@linaro.org>
2021-03-10semihosting: Move include/hw/semihosting/ -> include/semihosting/Philippe Mathieu-Daudé
We want to move the semihosting code out of hw/ in the next patch. This patch contains the mechanical steps, created using: $ git mv include/hw/semihosting/ include/ $ sed -i s,hw/semihosting,semihosting, $(git grep -l hw/semihosting) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210226131356.3964782-2-f4bug@amsat.org> Message-Id: <20210305135451.15427-2-alex.bennee@linaro.org>
2021-03-10hw/core: implement a guest-loader to support static hypervisor guestsAlex Bennée
Hypervisors, especially type-1 ones, need the firmware/bootcode to put their initial guest somewhere in memory and pass the information to it via platform data. The guest-loader is modelled after the generic loader for exactly this sort of purpose: $QEMU $ARGS -kernel ~/xen.git/xen/xen \ -append "dom0_mem=1G,max:1G loglvl=all guest_loglvl=all" \ -device guest-loader,addr=0x42000000,kernel=Image,bootargs="root=/dev/sda2 ro console=hvc0 earlyprintk=xen" \ -device guest-loader,addr=0x47000000,initrd=rootfs.cpio Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-5-alex.bennee@linaro.org>
2021-03-10hw/riscv: migrate fdt field to generic MachineStateAlex Bennée
This is a mechanical change to make the fdt available through MachineState. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-3-alex.bennee@linaro.org>
2021-03-10hw/board: promote fdt from ARM VirtMachineState to MachineStateAlex Bennée
The use of FDT's is quite common across our various platforms. To allow the guest loader to tweak it we need to make it available in the generic state. This creates the field and migrates the initial user to use the generic field. Other boards will be updated in later patches. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210303173642.3805-2-alex.bennee@linaro.org>
2021-03-10Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20210310' into staging target-arm queue: * Add new mps3-an547 board * target/arm: Restrict v7A TCG cpus to TCG accel * Implement a Xilinx CSU DMA model * hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() # gpg: Signature made Wed 10 Mar 2021 13:56:20 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20210310: (54 commits) hw/timer/renesas_tmr: Fix use of uninitialized data in read_tcnt() hw/timer/renesas_tmr: Prefix constants for CSS values with CSS_ hw/ssi: xilinx_spips: Remove DMA related dead codes from zynqmp_spips hw/ssi: xilinx_spips: Clean up coding convention issues hw/arm: xlnx-zynqmp: Connect a Xilinx CSU DMA module for QSPI hw/arm: xlnx-zynqmp: Clean up coding convention issues hw/dma: Implement a Xilinx CSU DMA model target/arm: Restrict v7A TCG cpus to TCG accel tests/qtest/sse-timer-test: Test counter scaling changes tests/qtest/sse-timer-test: Test the system timer tests/qtest/sse-timer-test: Add simple test of the SSE counter docs/system/arm/mps2.rst: Document the new mps3-an547 board hw/arm/mps2-tz: Add new mps3-an547 board hw/arm/mps2-tz: Make initsvtor0 setting board-specific hw/arm/mps2-tz: Support running APB peripherals on different clock hw/misc/mps2-scc: Implement changes for AN547 hw/misc/mps2-fpgaio: Support AN547 DBGCTRL register hw/misc/mps2-fpgaio: Fold counters subsection into main vmstate hw/arm/mps2-tz: Make UART overflow IRQ board-specific hw/arm/armsse: Add SSE-300 support ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 07:22:04 +0000