| Age | Commit message (Collapse) | Author |
|---|
|
The implementation is wrong for kvm, and it's unused anyway.
Drop it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130528102023.GA30055@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When pc-sysfw.rom_only == 0, flash memory will be
usable with kvm. In order to enable flash memory mode,
a pflash device must be created. (For example, by
using the -pflash command line parameter.)
Usage of a flash memory device with kvm requires
KVM_CAP_READONLY_MEM, and kvm will abort if
a flash device is used with an older kvm which does
not support this capability.
If a flash device is not used, then qemu/kvm will
operate in the original rom-mode.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-5-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The isapc machine with seabios currently requires the BIOS region
to be read/write memory rather than read-only memory.
KVM currently cannot support the BIOS as a ROM region, but qemu
in non-KVM mode can. Based on this, isapc machine currently only
works with KVM.
To work-around this isapc issue, this change avoids marking the
BIOS as readonly for isapc.
This change also will allow KVM to start supporting ROM mode
via KVM_CAP_READONLY_MEM.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1369816047-16384-2-git-send-email-jordan.l.justen@intel.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Aneesh Kumar K.V (3) and Gabriel de Perthuis (1)
# Via Aneesh Kumar K.V
* aneesh/for-upstream:
hw/9pfs: Be robust against paths without FS_IOC_GETVERSION
hw/9pfs: Use O_NOFOLLOW when opening files on server
hw/9pfs: use O_NOFOLLOW for mapped readlink operation
hw/9pfs: Fix segfault with 9p2000.u
Message-id: 87zjvevx4s.fsf@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
9P optionally uses the FS_IOC_GETVERSION ioctl to get information about
a file's version (sometimes called generation number).
The code checks for supported filesystems at mount time, but some paths
may come from other mounted filesystems.
Change it to treat unsupported paths the same as unsupported
filesystems, returning 0 in both cases.
Note: ENOTTY is the error code for an unsupported ioctl.
This fix allows booting a linux kernel with the same / filesystem as the
host; otherwise the boot fails when mounting devtmpfs.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
9p server should never follow a symlink. So use O_NOFOLLOW with all open
syscall
Tested-by: "M. Mohan Kumar" <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
With mapped security models like mapped-xattr and mapped-file, we save the
symlink target as file contents. Now if we ever expose a normal directory
with mapped security model and find real symlinks in export path, never
follow them and return proper error.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
When guest tries to chmod a block or char device file over 9pfs,
the qemu process segfaults. With 9p2000.u protocol we use wstat to
change mode bits and client don't send extension information for
chmod. We need to check for size field to check whether extension
info is present or not.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
Sun4c and Sun4d architectures and related CPUs are not fully implemented
(especially Sun4c MMU) and there has been no interest for them.
Likewise, a few CPUs (Cypress, Ross etc) are only half implemented.
Remove the machines and CPUs, they can be re-added if needed later.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
# By Paolo Bonzini (11) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
memory: clean up phys_page_find
memory: populate FlatView for new address spaces
memory: limit sections in the radix tree to the actual address space size
s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62
memory: fix address space initialization/destruction
memory: make memory_global_sync_dirty_bitmap take an AddressSpace
memory: do not duplicate memory_region_destructor_none
memory: Rename readable flag to romd_mode
memory: Replace open-coded memory_region_is_romd
memory: allow memory_region_find() to run on non-root memory regions
memory: assert that PhysPageEntry's ptr does not overflow
exec: eliminate stq_phys_notdirty
exec: make qemu_get_ram_ptr private
exec: eliminate qemu_put_ram_ptr
exec: remove obsolete comment
Message-id: 1369414987-8839-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
"Readable" is a very unfortunate name for this flag because even a
rom_device region will always be readable from the guest POV. What
differs is the mapping, just like the comments had to explain already.
Also, readable could currently be understood as being a generic region
flag, but it only applies to rom_device regions.
So rename the flag and the function to modify it after the original term
"ROMD" which could also be interpreted as "ROM direct", i.e. ROM mode
with direct access. In any case, the scope of the flag is clearer now.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Net queues support efficient "receive disable". For example, tap's file
descriptor will not be polled while its peer has receive disabled. This
saves CPU cycles for needlessly copying and then dropping packets which
the peer cannot receive.
rtl8139 is missing the qemu_flush_queued_packets() call that wakes the
queue up when receive becomes possible again.
As a result, the Windows 7 guest driver reaches a state where the
rtl8139 cannot receive packets. The driver has actually refilled the
receive buffer but we never resume reception.
The bug can be reproduced by running a large FTP 'get' inside a Windows
7 guest:
$ qemu -netdev tap,id=tap0,...
-device rtl8139,netdev=tap0
The Linux guest driver does not trigger the bug, probably due to a
different buffer management strategy.
Reported-by: Oliver Francke <oliver.francke@filoo.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
# By Christophe Lyon (1) and others
# Via Michael Tokarev
* mjt/trivial-patches:
target-moxie: replace target_phys_addr_t with hwaddr
Rename hexdump to avoid FreeBSD libutil conflict
remove some double-includes
translate: remove redundantly included qemu/timer.h
Remove twice include of qemu-common.h
fix /proc/self/maps output
Message-id: 51977B44.1000302@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
To support guest MSI affinity changes update the MSI message any time
the guest writes to the address or data fields.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130513201840.5430.86331.stgit@bling.home
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Virtio-net driver currently negotiates network offloads
on startup via features mechanism and have no ability to
disable and re-enable offloads later.
This patch introduced a new control command that allows
to configure device network offloads state dynamically.
The patch also introduces a new feature flag
VIRTIO_NET_F_CTRL_GUEST_OFFLOADS.
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130520081814.GA8162@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This unbreaks cross compile builds:
configure --target-list="i386-softmmu" --cpu=i386
When building on a 64bit machine.
Reported-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit 215e47b9 enabled TRIM by default, which revealed a bug in TRIM
support for the IDE macio emulation driver, introduced in d353fb72.
The call to dma_bdrv_io() is using a wrong opaque of type IDEState
instead of DBDMA_io. This patch fixes that.
Fixes LP#1179104
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Some source files #include the same header more than
once for no good reason. Remove second #includes in
such cases.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This adds virtio_bus_get_dev_path to fix migration id string which is wrong
since the virtio refactoring.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368723967-21050-1-git-send-email-fred.konrad@greensocs.com
Cc: mdroth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Although we try our best to automatically detect broken versions
of Linux which assume the old broken IRQ mapping we used to implement
for our model of the Versatile PCI controller, it turns out that
some particularly new kernels manage to outwit the autodetection.
We therefore provide a property for enabling the old broken IRQ
mapping, so that if users happen to have such a kernel they can
work around its deficiencies with the command line option:
-global versatile_pci.broken-irq-mapping=1
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Newer versatilepb kernels still don't get the IRQ mapping right
for the PCI controller, but they get it differently wrong (they add
a fixed +64 offset to everything they write to PCI_INTERRUPT_LINE).
Update the autodetection to handle these too, and include a more
detailed comment on the various different behaviours that might
be present.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This reverts commit 5f37ef92b7690423ac6311d3c597e182fc5f8fe6.
It turns out that some kernels incorrectly depend on the
old QEMU behaviour of not putting the host PCI bridge device
where the hardware puts it, because they use a swizzling IRQ
mapping which is incorrect but happens to match up with old
broken QEMU when the slot number mod 4 is zero. Since we
start PCI devices at 11, if we put the host bridge at 29
then the first real PCI device goes at 11 and doesn't work.
Not putting the host bridge at 29 means it defaults to 11,
so the first real PCI device is at 12 and works.
Since continuing with the old behaviour doesn't cause problems
for kernels which do work with hardware, the simplest fix for
this is to revert the change.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1368545616-22344-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This forwards the name and the type of virtio-net-x to fix the bad
behaviour of "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This adds virtio_net_set_netclient_name, which is used to set the
name and type shown in "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
pty.h is polluting the global namespace with a CTRL macro. spitz
thus fails compilation with the patch at
http://article.gmane.org/gmane.comp.emulators.qemu/211337 and
this patch fixes it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368533545-650-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Otherwise the guest can crash qemu (NULL pointer dereference).
https://bugzilla.redhat.com/show_bug.cgi?id=947691
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1368534544-11826-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This reverts commit 9953f8822cc316eec9962f0a2858c3439a80adec.
While Markus's analysis is entirely correct, there are 1.6 patches
that fix the bug for real and without requiring machine type hacks.
Let's think of the children who will have to read this code, and
avoid a complicated mess of semantics that differ between <1.5,
1.5, and >1.5.
Conflicts:
hw/i386/pc_piix.c
hw/i386/pc_q35.c
include/hw/i386/pc.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1368189483-7915-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Dong Xu Wang (2) and others
# Via Michael Tokarev
* mjt/trivial-patches-next:
osdep.h: include sys/types.h for ssize_t definition
remove double semicolons
clean unnecessary code: don't check g_strdup arg for NULL
docs: mention AddressSpaces in docs/memory.txt
audio: update documentation after removing --audio-card-list option
m25p80.c: Sync Flash chip list with Linux
bsd-user: OS-agnostic 64-bit SYSCTL types
Message-id: 518F61B9.9050803@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Add new devices for various manufacturers, and re-sort Spansion list to
match the order in Linux, which requires chips with a non-zero extended ID
to come first.
With this commit the outstanding differences to Linux rev 55bf75b are:
- Erase size flag differences in s25sl032p, s25sl064p, s25fl016k, s25fl064k
(These devices have only some blocks that support small erase sizes.)
- Linux lacks n25q128
- Devices without a Jedec ID have been excluded
Signed-off-by: Ed Maste <emaste@freebsd.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
With a SPICE_DISPLAY_CAP_MONITORS_CONFIG capable client, the client needs to
know what part of the primary to use for each monitor. If the guest driver
does not support this, the server sends messages to the client for a
single monitor spanning the entire primary.
As soon as the guest calls spice_qxl_monitors_config_async once, the server
sets the red_worker driver_has_monitors_config flag and stops doing this.
This is a problem when the driver gets unloaded, for example after a reboot
or when switching to a text vc with usermode mode-setting under Linux.
To reproduce this start a multi-mon capable Linux guest which uses
usermode mode-setting and then once X has started switch to a text vc. Note
how the client window does not only not resize, if you try to resize it
manually you always keep blackborders since the aspect is wrong.
This patch calls a new spice-server method called spice_qxl_driver_unload
which clears the driver_has_monitors_config flag inside the server, thereby
fixing this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
# By Kevin Wolf (7) and Fam Zheng (3)
# Via Kevin Wolf
* kwolf/for-anthony:
qemu-iotests: fix 017 018 for vmdk
qemu-iotests: exclude vmdk and qcow from 043
qemu-iotests: exclude vmdk for test 042
qtest/ide-test: Test short and long PRDTs
qtest/ide-test: Add simple DMA read/write test case
qtest: Add IDE test case
libqos/pci: Enable bus mastering
ide: Reset BMIDEA bit when the bus master is stopped
de_DE.po: Add missing leading spaces
ahci: Don't allow creating slave drives
Message-id: 1368023344-29731-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
There are several several issues in the current checking:
- The check was based on the minus of unsigned values which can overflow
- It was done after .{set|get}_config() which can lead crash when config_len
is zero since vdev->config is NULL
Fix this by:
- Validate the address in virtio_pci_config_{read|write}() before
.{set|get}_config
- Use addition instead minus to do the validation
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Petr Matousek <pmatouse@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Petr Matousek <pmatouse@redhat.com>
Message-id: 1367905369-10765-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
mask notifiers are never called without msix,
so devices with backend masking like vhost don't work.
Call mask notifiers explicitly at
startup/cleanup to make it work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The device is supposed to reset the Bus Master IDE Active bit in the
status register when 0 is written to the Start/Stop Bus Master bit in
the command register.
In the common cases this happens automatically because bdrv_drain_all()
flushes the requests, but with a large PRDT it could remain set.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
An IDE bus provided by AHCI can only take a single IDE drive. If you add
a drive as slave, qemu used to accept the command line but the device
wouldn't be actually usable. Catch the situation instead and error out.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
# By Gerd Hoffmann (3) and Hans de Goede (1)
# Via Gerd Hoffmann
* kraxel/usb.82:
xhci: handle USB_RET_BABBLE
uhci: Use an intermediate buffer for usb packet data
usb-host: add usb_host_full_speed_compat
usb-host: live migration support for the libusb version
Message-id: 1367920207-1404-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit 32993698 (vhost: disable on tap link down) tries to disable the vhost
also when the peer's link is down. But the check was not done properly, the
vhost were only started when:
1) peer's link is not down
2) virtio-net has already been started.
Since == have a higher precedence than &&, place a brace to make sure both the
conditions were met then does the check. This fixes the crash when doing a savem
after set the link off which let qemu crash and complains:
virtio_net_save: Assertion `!n->vhost_started' failed.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-id: 1366972060-21606-1-git-send-email-jasowang@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
# By Eduardo Habkost (6) and others
# Via Andreas Färber
* afaerber/qom-cpu:
target-i386: n270 can MOVBE
target-i386: Introduce generic CPUID feature compat function
target-i386: Change CPUID model of 486 to 8
target-i386: Emulate X86CPU subclasses for global properties
qdev: Introduce qdev_prop_set_globals_for_type()
qdev: Let qdev_prop_parse() pass through Error
target-i386: Add "filtered-features" property to X86CPU
target-i386: Introduce X86CPU::filtered_features field
target-i386: Add "feature-words" property to X86CPU
target-i386: Use FeatureWord loop on filter_features_for_kvm()
target-i386: Add ECX information to FeatureWordInfo
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Due to various unfortunate reasons we cannot reliable detect a guest
cancelling a packet as soon as it happens, instead we detect cancels
with some delay.
When packets are handled async, and we directly pass the guest memory for
the packet to the usb-device as iovec, this means that the usb-device can
write to guest-memory which the guest has already re-used for other purposes
-> not good!
This patch fixes this by adding an intermediate buffer and writing back not
only the result, but also the data, of async completed packets when scanning
the schedule.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Alloes to pass through usb2 devices on usb1 host controllers if possible.
Brings the libusb implementation to feature-parity with the linux usbfs
code, so the usb-host implementation in 1.5 (libusb) doesn't regress
compared to 1.4 (usbfs).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
# By Marcelo Tosatti
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvmvapic: add ioport read accessor
Message-id: cover.1367844188.git.gleb@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The Atom core (cpu name "n270" in QEMU speak) supports MOVBE. This is
needed when booting 3.8 and later linux kernels built with the MATOM
target because we require MOVBE in order to boot properly now.
Signed-off-by: Borislav Petkov <bp@suse.de>
[ehabkost: added compat code to disable MOVBE on pc-*-1.4 and older]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390: update s390-ccw.img
S390: BIOS boot from given device
S390: Add virtio-blk boot
S390: Merging s390_ipl_cpu and s390_ipl_reset
S390: BIOS create link to src folder for .img file
S390: BIOS check for file
|
|
Reuse it in qdev_prop_set_globals().
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Renamed from qdev_prop_set_custom_globals()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
