summaryrefslogtreecommitdiff
path: root/hw/sd
AgeCommit message (Collapse)Author
2020-11-17hw/sd: Fix 2 GiB card CSD register valuesBin Meng
Per the SD spec, to indicate a 2 GiB card, BLOCK_LEN shall be 1024 bytes, hence the READ_BL_LEN field in the CSD register shall be 10 instead of 9. This fixes the acceptance test error for the NetBSD 9.0 test of the Orange Pi PC that has an expanded SD card image of 2 GiB size. Fixes: 6d2d4069c47e ("hw/sd: Correct the maximum size of a Standard Capacity SD Memory Card") Reported-by: Niek Linnenbank <nieklinnenbank@gmail.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-Id: <20201025152357.11865-1-bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-11-15nomaintainer: Fix Lesser GPL version numberChetan Pant
There is no "version 2" of the "Lesser" General Public License. It is either "GPL version 2.0" or "Lesser GPL version 2.1". This patch replaces all occurrences of "Lesser GPL version 2" with "Lesser GPL version 2.1" in comment section. This patch contains all the files, whose maintainer I could not get from ‘get_maintainer.pl’ script. Signed-off-by: Chetan Pant <chetan4windows@gmail.com> Message-Id: <20201023124424.20177-1-chetan4windows@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Adapted exec.c and qdev-monitor.c to new location] Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-10-26hw/sd/sdcard: Zero out function selection fields before being populatedBin Meng
The function selection fields (399:376) should be zeroed out to prevent leftover from being or'ed into the switch function status data structure. This fixes the boot failure as seen in the acceptance testing on the orangepi target. Fixes: b638627c723a ("hw/sd: Fix incorrect populated function switch status data structure") Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20201024014954.21330-1-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-10-26hw/sd/sdcard: Make iolen unsignedPhilippe Mathieu-Daudé
I/O request length can not be negative. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630133912.9428-15-f4bug@amsat.org>
2020-10-26hw/sd/sdcard: Constify sd_crc*()'s message argumentPhilippe Mathieu-Daudé
CRC functions don't modify the buffer argument, make it const. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200630133912.9428-14-f4bug@amsat.org>
2020-10-26hw/sd/sdcard: Simplify cmd_valid_while_locked()Philippe Mathieu-Daudé
cmd_valid_while_locked() only needs to read SDRequest->cmd, pass it directly and make it const. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630133912.9428-13-f4bug@amsat.org>
2020-10-26hw/sd/sdcard: Update the SDState documentationPhilippe Mathieu-Daudé
Add more descriptive comments to keep a clear separation between static property vs runtime changeable. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630133912.9428-12-f4bug@amsat.org>
2020-10-21hw/sd/sdcard: Assert if accessing an illegal groupPhilippe Mathieu-Daudé
We can not have more group than 'wpgrps_size'. Assert if we are accessing a group above this limit. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20201015063824.212980-7-f4bug@amsat.org>
2020-10-21hw/sd/sdcard: Do not attempt to erase out of range addressesPhilippe Mathieu-Daudé
While the Spec v3 is not very clear, v6 states: If the host provides an out of range address as an argument to CMD32 or CMD33, the card shall indicate OUT_OF_RANGE error in R1 (ERX) for CMD38. If an address is out of range, do not attempt to erase it: return R1 with the error bit set. Buglink: https://bugs.launchpad.net/qemu/+bug/1895310 Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20201015063824.212980-6-f4bug@amsat.org>
2020-10-21hw/sd/sdcard: Reset both start/end addresses on errorPhilippe Mathieu-Daudé
From the Spec "4.3.5 Erase": The host should adhere to the following command sequence: ERASE_WR_BLK_START, ERASE_WR_BLK_END and ERASE (CMD38). If an erase (CMD38) or address setting (CMD32, 33) command is received out of sequence, the card shall set the ERASE_SEQ_ERROR bit in the status register and reset the whole sequence. Reset both addresses if the ERASE command occured out of sequence (one of the start/end address is not set). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20201015063824.212980-5-f4bug@amsat.org>
2020-10-21hw/sd/sdcard: Do not use legal address '0' for INVALID_ADDRESSPhilippe Mathieu-Daudé
As it is legal to WRITE/ERASE the address/block 0, change the value of this definition to an illegal address: UINT32_MAX. Unfortunately this break the migration stream, so bump the VMState version number. This affects some ARM boards and the SDHCI_PCI device (which is only used for testing). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20201015063824.212980-4-f4bug@amsat.org>
2020-10-21hw/sd/sdcard: Introduce the INVALID_ADDRESS definitionPhilippe Mathieu-Daudé
'0' is used as a value to indicate an invalid (or unset) address. Use a definition instead of a magic value. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20201015063824.212980-3-f4bug@amsat.org>
2020-10-21hw/sd/sdcard: Add trace event for ERASE command (CMD38)Philippe Mathieu-Daudé
Trace addresses provided to the ERASE command. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20201015063824.212980-2-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Yield if interrupt delivered during multiple transferPhilippe Mathieu-Daudé
The Descriptor Table has a bit to allow the DMA to generates Interrupt when the operation of the descriptor line is completed (see "1.13.4. Descriptor Table" of 'SD Host Controller Simplified Specification Version 2.00'). If we have pending interrupt and the descriptor requires it to be generated as soon as it is completed, reschedule pending transfers and yield to the CPU. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200903172806.489710-5-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Let sdhci_update_irq() return if IRQ was deliveredPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200903172806.489710-4-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Resume pending DMA transfers on MMIO accessesPhilippe Mathieu-Daudé
If we have pending DMA requests scheduled, process them first. So far we don't need to implement a bottom half to process them. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200903172806.489710-3-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Stop multiple transfers when block count is clearedPhilippe Mathieu-Daudé
Clearing BlockCount stops multiple transfers. See "SD Host Controller Simplified Specification Version 2.00": - 2.2.3. Block Count Register (Offset 006h) - Table 2-8 : Determination of Transfer Type Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200903172806.489710-2-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Fix DMA Transfer Block Size fieldPhilippe Mathieu-Daudé
The 'Transfer Block Size' field is 12-bit wide. See section '2.2.2. Block Size Register (Offset 004h)' in datasheet. Two different bug reproducer available: - https://bugs.launchpad.net/qemu/+bug/1892960 - https://ruhr-uni-bochum.sciebo.de/s/NNWP2GfwzYKeKwE?path=%2Fsdhci_oob_write1 Cc: qemu-stable@nongnu.org Buglink: https://bugs.launchpad.net/qemu/+bug/1892960 Fixes: d7dfca0807a ("hw/sdhci: introduce standard SD host controller") Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200901140411.112150-3-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Document the datasheet usedPhilippe Mathieu-Daudé
Add datasheet name in the file header. We can not add the direct download link since there is a disclaimers to agree first on the SD Association website (www.sdcard.org). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200901140411.112150-3-f4bug@amsat.org>
2020-10-21hw/sd/sdhci: Fix qemu_log_mask() format stringPhilippe Mathieu-Daudé
Add missing newline character in qemu_log_mask() format. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Message-Id: <20200901140411.112150-2-f4bug@amsat.org>
2020-10-12qdev: add "check if address free" callback for busesPaolo Bonzini
Check if an address is free on the bus before plugging in the device. This makes it possible to do the check without any side effects, and to detect the problem early without having to do it in the realize callback. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20201006123904.610658-5-mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-13Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20200910' into staging This PR includes multiple fixes and features for RISC-V: - Fixes a bug in printing trap causes - Allows 16-bit writes to the SiFive test device. This fixes the failure to reboot the RISC-V virt machine - Support for the Microchip PolarFire SoC and Icicle Kit - A reafactor of RISC-V code out of hw/riscv # gpg: Signature made Thu 10 Sep 2020 19:08:06 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20200910: (30 commits) hw/riscv: Sort the Kconfig options in alphabetical order hw/riscv: Drop CONFIG_SIFIVE hw/riscv: Always build riscv_hart.c hw/riscv: Move sifive_test model to hw/misc hw/riscv: Move sifive_uart model to hw/char hw/riscv: Move riscv_htif model to hw/char hw/riscv: Move sifive_plic model to hw/intc hw/riscv: Move sifive_clint model to hw/intc hw/riscv: Move sifive_gpio model to hw/gpio hw/riscv: Move sifive_u_otp model to hw/misc hw/riscv: Move sifive_u_prci model to hw/misc hw/riscv: Move sifive_e_prci model to hw/misc hw/riscv: sifive_u: Connect a DMA controller hw/riscv: clint: Avoid using hard-coded timebase frequency hw/riscv: microchip_pfsoc: Hook GPIO controllers hw/riscv: microchip_pfsoc: Connect 2 Cadence GEMs hw/arm: xlnx: Set all boards' GEM 'phy-addr' property value to 23 hw/net: cadence_gem: Add a new 'phy-addr' property hw/riscv: microchip_pfsoc: Connect a DMA controller hw/dma: Add SiFive platform DMA controller emulation ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/riscv/trace-events
2020-09-12Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging trivial patches pull request 20200911 # gpg: Signature made Fri 11 Sep 2020 20:32:27 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: target/i386/kvm: Add missing fallthrough comment util/hexdump: Reorder qemu_hexdump() arguments util/hexdump: Convert to take a void pointer argument hw/arm/pxa2xx: Add missing fallthrough comment target/i386/kvm: Rename host_tsx_blacklisted() as host_tsx_broken() test-vmstate: remove unnecessary code in match_interval_mapping_node hw: hyperv: vmbus: Fix 32bit compilation kconfig: fix comment referring to old Makefiles meson.build: tweak sdl-image error message hw/net/e1000e: Remove duplicated write handler for FLSWDATA register hw/net/e1000e: Remove overwritten read handler for STATUS register Makefile: Skip the meson subdir in cscope/TAGS/ctags Makefile: Drop extra phony cscope hw/gpio/max7310: Replace disabled printf() by qemu_log_mask(UNIMP) hw/gpio/omap_gpio: Replace fprintf() by qemu_log_mask(GUEST_ERROR) hw/acpi/tco: Remove unused definitions hw/isa/isa-bus: Replace hw_error() by assert() hw/mips/fuloong2e: Convert pointless error message to an assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # net/colo-compare.c
2020-09-11util/hexdump: Reorder qemu_hexdump() argumentsPhilippe Mathieu-Daudé
qemu_hexdump()'s pointer to the buffer and length of the buffer are closely related arguments but are widely separated in the argument list order (also, the format of <stdio.h> function prototypes is usually to have the FILE* argument coming first). Reorder the arguments as "fp, prefix, buf, size" which is more logical. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-3-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-11util/hexdump: Convert to take a void pointer argumentPhilippe Mathieu-Daudé
Most uses of qemu_hexdump() do not take an array of char as input, forcing use of cast. Since we can use this helper to dump any kind of buffer, use a pointer to void argument instead. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200822180950.1343963-2-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-09hw/sd: Add Cadence SDHCI emulationBin Meng
Cadence SD/SDIO/eMMC Host Controller (SD4HC) is an SDHCI compatible controller. The SDHCI compatible registers start from offset 0x200, which are called Slot Register Set (SRS) in its datasheet. This creates a Cadence SDHCI model built on top of the existing generic SDHCI model. Cadence specific Host Register Set (HRS) is implemented to make guest software happy. Signed-off-by: Bin Meng <bin.meng@windriver.com> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09Use DECLARE_*CHECKER* when possible (--force mode)Eduardo Habkost
Separate run of the TypeCheckMacro converter using the --force flag, for the cases where typedefs weren't found in the same header nor in typedefs.h. Generated initially using: $ ./scripts/codeconverter/converter.py --force -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Then each case was manually reviewed, and a comment was added indicating what's unusual about those type checking macros/functions. Despite not following the usual pattern, the changes in this patch were found to be safe. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20200831210740.126168-15-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-01aspeed/sdhci: Fix reset sequenceCédric Le Goater
BIT(0) of the ASPEED_SDHCI_INFO register is set by SW and polled until the bit is cleared by HW. Use the number of supported slots to define the default value of this register (The AST2600 eMMC Controller only has one). Fix the reset sequence by clearing automatically the RESET bit. Cc: Eddie James <eajames@linux.ibm.com> Fixes: 2bea128c3d0b ("hw/sd/aspeed_sdhci: New device") Reviewed-by: Joel Stanley <joel@jms.id.au> Message-Id: <20200819100956.2216690-9-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
2020-08-28Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20200828' into staging target-arm queue: * target/arm: Cleanup and refactoring preparatory to SVE2 * armsse: Define ARMSSEClass correctly * hw/misc/unimp: Improve information provided in log messages * hw/qdev-clock: Avoid calling qdev_connect_clock_in after DeviceRealize * hw/arm/xilinx_zynq: Call qdev_connect_clock_in() before DeviceRealize * hw/net/allwinner-sun8i-emac: Use AddressSpace for DMA transfers * hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfers * target/arm: Fill in the WnR syndrome bit in mte_check_fail * target/arm: Clarify HCR_EL2 ARMCPRegInfo type * hw/arm/musicpal: Use AddressSpace for DMA transfers * hw/clock: Minor cleanups * hw/arm/sbsa-ref: fix typo breaking PCIe IRQs # gpg: Signature made Fri 28 Aug 2020 10:23:02 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20200828: (35 commits) target/arm: Convert sq{, r}dmulh to gvec for aa64 advsimd target/arm: Convert integer multiply-add (indexed) to gvec for aa64 advsimd target/arm: Convert integer multiply (indexed) to gvec for aa64 advsimd target/arm: Generalize inl_qrdmlah_* helper functions target/arm: Tidy SVE tszimm shift formats target/arm: Split out gen_gvec_ool_zz target/arm: Split out gen_gvec_ool_zzz target/arm: Split out gen_gvec_ool_zzp target/arm: Merge helper_sve_clr_* and helper_sve_movz_* target/arm: Split out gen_gvec_ool_zzzp target/arm: Use tcg_gen_gvec_bitsel for trans_SEL_pppp target/arm: Clean up 4-operand predicate expansion target/arm: Merge do_vector2_p into do_mov_p target/arm: Rearrange {sve,fp}_check_access assert target/arm: Split out gen_gvec_fn_zzz, do_zzz_fn target/arm: Split out gen_gvec_fn_zz qemu/int128: Add int128_lshift armsse: Define ARMSSEClass correctly hw/misc/unimp: Display the offset with width of the region size hw/misc/unimp: Display the value with width of the access size ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-28hw/sd/allwinner-sdhost: Use AddressSpace for DMA transfersPhilippe Mathieu-Daudé
Allow the device to execute the DMA transfers in a different AddressSpace. The A10 and H3 SoC keep using the system_memory address space, but via the proper dma_memory_access() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com> Message-id: 20200814110057.307-1-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-27pxa2xx: Move QOM macros to headerEduardo Habkost
This will make future conversion to OBJECT_DECLARE* easier. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Tested-By: Roman Bolshakov <r.bolshakov@yadro.com> Message-Id: <20200825192110.3528606-40-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-08-21hw/sd: Correct the maximum size of a Standard Capacity SD Memory CardBin Meng
Per the SD spec, Standard Capacity SD Memory Card (SDSC) supports capacity up to and including 2 GiB. Fixes: 2d7adea4fe ("hw/sd: Support SDHC size cards") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-Id: <1598021136-49525-2-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-08-21hw/sd: Fix incorrect populated function switch status data structureBin Meng
At present the function switch status data structure bit [399:376] are wrongly pupulated. These 3 bytes encode function switch status for the 6 function groups, with 4 bits per group, starting from function group 6 at bit 399, then followed by function group 5 at bit 395, and so on. However the codes mistakenly fills in the function group 1 status at bit 399. This fixes the code logic. Fixes: a1bb27b1e9 ("SD card emulation (initial implementation)") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com> Message-Id: <1598021136-49525-1-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-08-21hw/sd: Use sdbus_read_data() instead of sdbus_read_byte() when possiblePhilippe Mathieu-Daudé
Use the recently added sdbus_read_data() to read multiple bytes at once, instead of looping calling sdbus_read_byte(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-8-f4bug@amsat.org>
2020-08-21hw/sd: Add sdbus_read_data() to read multiples bytes on the data linePhilippe Mathieu-Daudé
Add a sdbus_read_data() method to read multiple bytes on the data line of a SD bus. We might improve the tracing later, for now keep logging each byte individually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-7-f4bug@amsat.org>
2020-08-21hw/sd: Use sdbus_write_data() instead of sdbus_write_byte when possiblePhilippe Mathieu-Daudé
Use the recently added sdbus_write_data() to write multiple bytes at once, instead of looping calling sdbus_write_byte(). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-6-f4bug@amsat.org>
2020-08-21hw/sd: Add sdbus_write_data() to write multiples bytes on the data linePhilippe Mathieu-Daudé
Add a sdbus_write_data() method to write multiple bytes on the data line of a SD bus. We might improve the tracing later, for now keep logging each byte individually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-5-f4bug@amsat.org>
2020-08-21hw/sd: Rename sdbus_read_data() as sdbus_read_byte()Philippe Mathieu-Daudé
The sdbus_read_data() method do a single byte access on the data line of a SD bus. Rename it as sdbus_read_byte() and document it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-4-f4bug@amsat.org>
2020-08-21hw/sd: Rename sdbus_write_data() as sdbus_write_byte()Philippe Mathieu-Daudé
The sdbus_write_data() method do a single byte access on the data line of a SD bus. Rename it as sdbus_write_byte() and document it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-3-f4bug@amsat.org>
2020-08-21hw/sd: Rename read/write_data() as read/write_byte()Philippe Mathieu-Daudé
The read/write_data() methods write do a single byte access on the data line of a SD card. Rename them as read/write_byte(). Add some documentation (not in "hw/sd/sdcard_legacy.h" which we are going to remove soon). Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200814092346.21825-2-f4bug@amsat.org>
2020-08-21hw/sd: Move sdcard legacy API to 'hw/sd/sdcard_legacy.h'Philippe Mathieu-Daudé
omap_mmc.c is the last device left using the legacy sdcard API. Move the prototype declarations into a separate header, to make it clear this is a legacy API. Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180216022933.10945-8-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21hw/sd/sdcard: Make sd_data_ready() staticPhilippe Mathieu-Daudé
sd_data_ready() belongs to the legacy API. As its last user has been converted to the SDBus API, make it static. Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-Id: <20180216022933.10945-7-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21hw/sd/pl181: Replace disabled fprintf()s by trace eventsPhilippe Mathieu-Daudé
Convert disabled DPRINTF() to trace events and remove ifdef'ry. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200705204630.4133-9-f4bug@amsat.org>
2020-08-21hw/sd/pl181: Do not create SD card within the SD host controllerPhilippe Mathieu-Daudé
SD/MMC host controllers provide a SD Bus to plug SD cards, but don't come with SD card plugged in :) Let the machine/board model create and plug the SD cards when required. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200705204630.4133-8-f4bug@amsat.org>
2020-08-21hw/sd/pl181: Expose a SDBus and connect the SDCard to itPhilippe Mathieu-Daudé
Convert the controller to the SDBus API: - add the a TYPE_PL181_BUS object of type TYPE_SD_BUS, - adapt the SDBusClass set_inserted/set_readonly handlers - create the bus in the PL181 controller - switch legacy sd_*() API to the sdbus_*() API. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200705204630.4133-7-f4bug@amsat.org>
2020-08-21hw/sd/pl181: Use named GPIOsPhilippe Mathieu-Daudé
To make the code easier to manage/review/use, rename the cardstatus[0] variable as 'card_readonly' and name the GPIO "card-read-only". Similarly with cardstatus[1], renamed as 'card_inserted' and name its GPIO "card-inserted". Adapt the users accordingly by using the qdev_init_gpio_out_named() function. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200705204630.4133-6-f4bug@amsat.org>
2020-08-21hw/sd/pl181: Add TODO to use Fifo32 APIPhilippe Mathieu-Daudé
Add TODO to use Fifo32 API from "qemu/fifo32.h". Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200705204630.4133-4-f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 10:35:16 +0000