summaryrefslogtreecommitdiff
path: root/hw/sd
AgeCommit message (Collapse)Author
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16sd: Fix "info qtree" on boards with SD cardsPeter Maydell
The SD card object is not a SysBusDevice, so don't create it with qdev_create() if we're not assigning it to a specific bus; use object_new() instead. This was causing 'info qtree' to segfault on boards with SD cards, because qdev_create(NULL, TYPE_FOO) puts the created object on the system bus, and then we may try to run functions like sysbus_dev_print() on it, which fail when casting the object to SysBusDevice. (This is the same mistake that we made with the NAND device and fixed in commit 6749695eaaf346c1.) Reported-by: xiaoqiang.zhao <zxq_yx_007@163.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: xiaoqiang.zhao <zxq_yx_007@163.com> Message-id: 1458061009-7733-1-git-send-email-peter.maydell@linaro.org
2016-03-04sdhci: Implement DeviceClass resetPeter Maydell
The sdhci device was missing a DeviceClass reset method; implement it. Poweron reset looks the same as reset commanded by the guest via the device registers, apart from modelling of the rpi 'pending insert interrupt on powerup' quirk. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456493044-10025-3-git-send-email-peter.maydell@linaro.org
2016-03-04sd.c: Handle NULL block backend in sd_get_inserted()Peter Maydell
The sd.c SD card emulation code can be in a state where the SDState BlockBackend pointer is NULL; this is treated as "card not present". Add a missing check to sd_get_inserted() so that we don't segfault in this situation. (This could be provoked by the guest writing to the SDHCI register to do a reset on a xilinx-zynq-a9 board; it will also happen at startup when sdhci implements its DeviceClass reset method.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1456493044-10025-2-git-send-email-peter.maydell@linaro.org
2016-02-26sdhci: add quirk property for card insert interrupt status on Raspberry PiAndrew Baumann
This quirk is a workaround for the following hardware behaviour, on which UEFI (specifically, the bootloader for Windows on Pi2) depends: 1. at boot with an SD card present, the interrupt status/enable registers are initially zero 2. upon enabling it in the interrupt enable register, the card insert bit in the interrupt status register is immediately set 3. after a subsequent controller reset, the card insert interrupt does not fire, even if enabled in the interrupt enable register Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-3-git-send-email-Andrew.Baumann@microsoft.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26sdhci: Revert "add optional quirk property to disable card insertion/removal ↵Andrew Baumann
interrupts" This reverts commit 723697551a7e926abe7d3c7f2966012b8075143d. This change was poorly tested on my part. It squelched card insertion interrupts on reset, but that was not necessary because sdhci_reset() clears all the registers (via the call to memset), so the subsequent sdhci_insert_eject_cb() call never sees the card insert interrupt enabled. However, not calling the insert_eject_cb results in prnsts remaining 0, when it actually needs to be updated to indicate card presence and R/O status. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1456436130-7048-2-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/sd: use guest error logging rather than fprintf to stderrAndrew Baumann
Some of these errors may be harmless (e.g. probing unimplemented commands, or issuing CMD12 in the wrong state), and may also be quite frequent. Spamming the standard error output isn't desirable in such cases. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1454902521-21164-4-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/sd: model a power-up delay, as a workaround for an EDK2 bugAndrew Baumann
The SD spec for ACMD41 says that a zero argument is an "inquiry" ACMD41, which does not start initialisation and is used only for retrieving the OCR. However, Tianocore EDK2 (UEFI) has a bug [1]: it first sends an inquiry (zero) ACMD41. If that first request returns an OCR value with the power up bit (0x80000000) set, it assumes the card is ready and continues, leaving the card in the wrong state. (My assumption is that this works on hardware, because no real card is immediately powered up upon reset.) This change models a delay of 0.5ms from the first ACMD41 to the power being up. However, it also immediately sets the power on upon seeing a non-zero (non-enquiry) ACMD41. This speeds up UEFI boot, it should also account for guests that simply delay after card reset and then issue an ACMD41 that they expect will succeed. [1] https://github.com/tianocore/edk2/blob/master/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c#L279 (This is the loop starting with "We need to wait for the MMC or SD card is ready") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1454902521-21164-3-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/sd: implement CMD23 (SET_BLOCK_COUNT) for MMC compatibilityAndrew Baumann
CMD23 is optional for SD but required for MMC, and the UEFI bootloader used for Windows on Raspberry Pi 2 issues it. Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1454902521-21164-2-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18hw/sd/pxa2xx_mmci: Add reset functionPeter Maydell
Add a reset function to the pxa2xx_mmci device; previously it had no handling for system reset at all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1455646193-13238-11-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/pxa2xx_mmci: Convert to VMStateDescriptionPeter Maydell
Convert the pxa2xx_mmci device from manual save/load functions to a VMStateDescription structure. This is a migration compatibility break. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1455646193-13238-10-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/pxa2xx_mmci: Update to use new SDBus APIsPeter Maydell
Now the PXA2xx MMCI device is QOMified itself, we can update it to use the SDBus APIs to talk to the SD card. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455646193-13238-9-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/pxa2xx_mmci: convert to SysBusDevice objectPeter Maydell
Convert the pxa2xx_mmci device to be a sysbus device. In this commit we only change the device itself, and leave the interface to the SD card using the old non-SDBus APIs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1455646193-13238-8-git-send-email-peter.maydell@linaro.org
2016-02-18sdhci_sysbus: Create SD card device in users, not the device itselfPeter Maydell
Move the creation of the SD card device from the sdhci_sysbus device itself into the boards that create these devices. This allows us to remove the cannot_instantiate_with_device_add notation because we no longer call drive_get_next in the device model. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-7-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/sdhci.c: Update to use SDBus APIsPeter Maydell
Update the SDHCI code to use the new SDBus APIs. This commit introduces the new command line options required to connect a disk to sdhci-pci: -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-6-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd: Add QOM bus which SD cards plug in toPeter Maydell
Add a QOM bus for SD cards to plug in to. Note that since sd_enable() is used only by one board and there only as part of a broken implementation, we do not provide it in the SDBus API (but instead add a warning comment about the old function). Whoever converts OMAP and the nseries boards to QOM will need to either implement the card switch properly or move the enable hack into the OMAP MMC controller model. In the SDBus API, the old-style use of sd_set_cb to register some qemu_irqs for notification of card insertion and write-protect toggling is replaced with methods in the SDBusClass which the card calls on status changes and methods in the SDClass which the controller can call to find out the current status. The query methods will allow us to remove the abuse of the 'register irqs' API by controllers in their reset methods to trigger the card to tell them about the current status again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-5-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/sd.c: Convert sd_reset() function into Device reset methodPeter Maydell
Convert the sd_reset() function into a proper Device reset method. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1455646193-13238-4-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/sd.c: QOMifyPeter Maydell
Turn the SD card into a QOM device. This conversion only changes the device itself; the various functions which are effectively methods on the device are not touched at this point. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1455646193-13238-3-git-send-email-peter.maydell@linaro.org
2016-02-18hw/sd/sdhci.c: Remove x-drive propertyPeter Maydell
The following commits will remove support for the old sdhci-pci command line syntax using the x-drive property: -device sdhci-pci,x-drive=mydrive -drive id=mydrive,[...] and replace it with an explicit sd device: -device sdhci-pci -drive id=mydrive,[...] -device sd,drive=mydrive (This is OK because x-drive is experimental.) This commit removes the x-drive property so that old style command lines will fail with a reasonable error message: -device sdhci-pci,x-drive=mydrive: Property '.x-drive' not found Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1455646193-13238-2-git-send-email-peter.maydell@linaro.org
2016-02-11sd: limit 'req.cmd' while using as an array indexPrasad J Pandit
While processing standard SD commands, the 'req.cmd' value could lead to OOB read when used as an index into 'sd_cmd_type' or 'sd_cmd_class' arrays. Limit 'req.cmd' value to avoid such an access. Reported-by: Qinghao Tang <luodalongde@gmail.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453315857-1352-1-git-send-email-ppandit@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2016-01-29arm devices: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-36-git-send-email-peter.maydell@linaro.org
2016-01-29arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-29lm32: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-5-git-send-email-peter.maydell@linaro.org
2016-01-21ssi: Move ssi.h into a separate directoryAlistair Francis
Move the ssi.h include file into the ssi directory. While touching the code also fix the typdef lines as checkpatch complains. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-22sdhci: add optional quirk property to disable card insertion/removal interruptsAndrew Baumann
This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC controller, where the card insert bit is documented as unimplemented (always reads zero, doesn't generate interrupts) but is in fact observed on hardware as set at power on, but is cleared (and remains clear) on subsequent controller resets. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1450738069-18664-4-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22sdhci: don't raise a command index error for an unexpected responseAndrew Baumann
This deletes a block of code that raised a command index error if a command returned response data, but the guest did not set the appropriate bits in the response register to handle such a response. I cannot find any documentation that suggests the controller should behave in this way, the error code doesn't make sense (command index error is defined for the case where the index in a response does not match that of the issued command), and in at least one case (CMD23 issued by UEFI on Raspberry Pi 2), actual hardware does not do this. Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: 1450738069-18664-3-git-send-email-Andrew.Baumann@microsoft.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-22sd: sdhci: Delete over-zealous power checkPeter Crosthwaite
This check was conditionalising SD card operation on the card being powered by the SDHCI host controller. It is however possible (particularly in embedded systems) for the power control of the SD card to be managed outside of SDHCI. This can be as trivial as hard-wiring the SD slot VCC to a constant power-rail. This means the guest SDHCI can validly opt-out of the SDHCI power control feature while still using the card. So delete this check to allow operation of the card with SDHCI power control. This is needed for at least Xilinx Zynq and Raspberry Pi, and also makes Freescale i.MX25 work for me. The digilent Zybo board has a public schematic which shows SD VCC hardwiring: http://digilentinc.com/Data/Products/ZYBO/ZYBO_sch_VB.3.pdf bottom of page 3. Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Sai Pavan Boddu <saipava@xilinx.com> Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1450738069-18664-2-git-send-email-Andrew.Baumann@microsoft.com [AB: Add Pi to list of devices fixed in commit message] Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-12-07sd: Mark brittle abuse of blk_attach_dev() FIXMEMarkus Armbruster
blk_attach_dev() fails here only when we're working for device "sdhci-pci" (which already attached the backend), and then we don't want to attach a second time. If we ever create another failure mode, we're setting up ourselves to using the same backend from multiple frontends, which is likely to end in tears. Can't clean this up this close to the release, so mark it FIXME. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449503710-3707-3-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-07sdhci: Sanitize "sdhci-pci" properties for future qomificationMarkus Armbruster
We currently fuse controller and card into a single device model, but we intend qomify things properly and separate the two. The properties that really belong to the card would then have to somehow pass-through to the card's properties. To avoid that complication, either mark them experimental or drop them. Properties "capareg", "maxcurr" and the usual PCI device properties belong to the controller. Property "drive" belongs to the card; rename it to "x-drive". Properties "logical_block_size", "physical_block_size", "min_io_size", "opt_io_size", "discard_granularity" belong to the card, but have no effect; drop them. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1449503710-3707-2-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-29sdhci: Split sdhci.h for public and internal device usageSai Pavan Boddu
Split sdhci.h into pubilc version (i.e include/hw/sd/sdhci.h) and internal version (i.e hw/sd/sdhci-interna.h) based on register declarations and object declaration. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-29sd.h: Move sd.h to include/hw/sd/Sai Pavan Boddu
Create a sd directory under include/hw/ and move sd.h to include/hw/sd/ Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-12sdhci.c: Limit the maximum block sizeAlistair Francis
It is possible for the guest to set an invalid block size which is larger then the fifo_buffer[] array. This could cause a buffer overflow. To avoid this limit the maximum size of the blksize variable. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reported-by: Intel Security ATR <secure@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Message-id: abe4c51f513290bbb85d1ee271cb1a3d463d7561.1444067470.git.alistair.francis@xilinx.com Suggested-by: Igor Mitsyanko <i.mitsyanko@gmail.com> Reported-by: Intel Security ATR <secure@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-12sdhci: Pass drive parameter to sdhci-pci via qdev propertyKevin O'Connor
Commit 19109131 disabled the sdhci-pci support because it used drive_get_next(). This patch reenables sdhci-pci and changes it to pass the drive via a qdev property - for example: -device sdhci-pci,drive=drive0 -drive id=drive0,if=sd,file=myimage Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-10-08sdhci: Change debug prints to compile unconditionallySai Pavan Boddu
Conditional compilation hides few type mismatch warnings, fix it to compile unconditionally. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Suggested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-10-08sdhci: use PRIx64 for uint64_t typeSai Pavan Boddu
Fix compile time warnings, because of type mismatch for unsigned long long type. Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternMarkus Armbruster
My Coccinelle semantic patch finds a few more, because it also fixes up the equally pointless conditional if (foo) { free(foo); foo = NULL; } Result (feel free to squash it into your patch): Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: avoid useless "if (foo) free(foo)" patternDaniel P. Berrange
The free() and g_free() functions both happily accept NULL on any platform QEMU builds on. As such putting a conditional 'if (foo)' check before calls to 'free(foo)' merely serves to bloat the lines of code. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-07arm: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. This commit only touches allocations with size arguments of the form sizeof(T). Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) @@ type T; expression n; @@ -(T *)g_new(T, n) +g_new(T, n) @@ type T; expression n; @@ -(T *)g_new0(T, n) +g_new0(T, n) @@ type T; expression p, n; @@ -(T *)g_renew(T, p, n) +g_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1440524394-15640-1-git-send-email-armbru@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15hw/sd/pxa2xx_mmci: Stop using old_mmio in MemoryRegionOpsPeter Maydell
Update the pxa2xx_mmci device to stop using the old_mmio read and write callbacks in its MemoryRegionOps. This actually simplifies the code because the separate byte/halfword/word access functions were all calling into a single function to do the work anyway. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1434117989-7367-6-git-send-email-peter.maydell@linaro.org
2015-05-12hw/sd: Don't pass BlockBackend to sd_reset()Peter Maydell
The only valid BlockBackend to pass to sd_reset() is the one for the SD card, which is sd->blk. Drop the second argument from this function in favour of having it just use sd->blk. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1430683444-9797-1-git-send-email-peter.maydell@linaro.org
2015-04-28sd: convert sd_normal_command() ffs(3) call to ctz32()Stefan Hajnoczi
ffs() cannot be replaced with ctz32() when the argument might be zero, because ffs(0) returns 0 while ctz32(0) returns 32. The ffs(3) call in sd_normal_command() is a special case though. It can be converted to ctz32() + 1 because the argument is never zero: if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) { ~~~~~~~~~~~~~~~ ^--------------- req.arg cannot be zero Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-7-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-02sysbus: Make devices picking up backends unavailable with -deviceMarkus Armbruster
Device models aren't supposed to go on fishing expeditions for backends. They should expose suitable properties for the user to set. For onboard devices, board code sets them. A number of sysbus devices pick up block backends in their init() / instance_init() methods with drive_get_next() instead: sl-nand, milkymist-memcard, pl181, generic-sdhci. Likewise, a number of sysbus devices pick up character backends in their init() / realize() methods with qemu_char_get_next_serial(): cadence_uart, digic-uart, etraxfs,serial, lm32-juart, lm32-uart, milkymist-uart, pl011, stm32f2xx-usart, xlnx.xps-uartlite. All these mistakes are already marked FIXME. See the commit that added these FIXMEs for a more detailed explanation of what's wrong. Fortunately, only machines ppce500 and pseries-* support -device with sysbus devices, and none of the devices above is supported with these machines. Set cannot_instantiate_with_device_add_yet to preserve our luck. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-02sdhci: Make device "sdhci-pci" unavailable with -deviceMarkus Armbruster
Device models aren't supposed to go on fishing expeditions for backends. They should expose suitable properties for the user to set. For onboard devices, board code sets them. "sdhci-pci" picks up its block backend in its realize() method with drive_get_next() instead. Already marked FIXME. See the commit that added the FIXME for a more detailed explanation of what's wrong. We can't fix this in time for the release, but since the device is new in 2.3, we can set cannot_instantiate_with_device_add_yet to disable it before this mistake becomes ABI, and we have to support command lines like $ qemu -drive if=sd -drive if=sd,file=sd.img -device sdhci-pci -device sdhci-pci forever. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-02hw: Mark devices picking up block backends actively FIXMEMarkus Armbruster
Drives defined with if!=none are for board initialization to wire up. Board code calls drive_get() or similar to find them, and creates devices with their qdev drive properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a drive property for board code to set: they call driver_get() or drive_get_next() in their realize() or init() method to implicitly connect to the "next" backend with a certain interface type. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is this inconsistent with how the other block device models work (they connect to a backend explicitly identified by a "drive" property), it breaks when the "next" backend has been picked up by the board already. Example: $ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd Aborted (core dumped) Mark them with suitable FIXME comments. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-03-19omap: Fix warnings from SparseStefan Weil
Sparse report: arm/omap1.c:1015:9: warning: returning void-valued expression arm/omap1.c:1084:9: warning: returning void-valued expression arm/omap1.c:1178:9: warning: returning void-valued expression arm/omap1.c:1287:9: warning: returning void-valued expression arm/omap1.c:1382:9: warning: returning void-valued expression arm/omap1.c:1650:9: warning: returning void-valued expression arm/omap1.c:1778:9: warning: returning void-valued expression arm/omap1.c:1985:9: warning: returning void-valued expression arm/omap1.c:210:9: warning: returning void-valued expression arm/omap1.c:2213:9: warning: returning void-valued expression arm/omap1.c:2352:9: warning: returning void-valued expression arm/omap1.c:2447:9: warning: returning void-valued expression arm/omap1.c:2640:9: warning: returning void-valued expression arm/omap1.c:317:9: warning: returning void-valued expression arm/omap1.c:3413:13: warning: returning void-valued expression arm/omap1.c:3414:13: warning: returning void-valued expression arm/omap1.c:3415:14: warning: returning void-valued expression arm/omap1.c:3589:9: warning: returning void-valued expression arm/omap1.c:443:9: warning: returning void-valued expression arm/omap1.c:588:9: warning: returning void-valued expression arm/omap1.c:860:9: warning: returning void-valued expression arm/omap2.c:1362:9: warning: returning void-valued expression arm/omap2.c:450:9: warning: returning void-valued expression arm/omap2.c:695:9: warning: returning void-valued expression arm/omap2.c:760:9: warning: returning void-valued expression hw/char/omap_uart.c:115:9: warning: returning void-valued expression hw/display/omap_dss.c:1019:9: warning: returning void-valued expression hw/display/omap_dss.c:215:9: warning: returning void-valued expression hw/display/omap_dss.c:380:9: warning: returning void-valued expression hw/display/omap_dss.c:739:9: warning: returning void-valued expression hw/display/omap_dss.c:931:9: warning: returning void-valued expression hw/dma/omap_dma.c:139:5: warning: returning void-valued expression hw/dma/omap_dma.c:1505:9: warning: returning void-valued expression hw/dma/omap_dma.c:1860:9: warning: returning void-valued expression hw/gpio/omap_gpio.c:116:9: warning: returning void-valued expression hw/misc/omap_gpmc.c:627:9: warning: returning void-valued expression hw/misc/omap_l4.c:85:9: warning: returning void-valued expression hw/misc/omap_sdrc.c:95:9: warning: returning void-valued expression hw/misc/omap_tap.c:98:9: warning: returning void-valued expression hw/sd/omap_mmc.c:409:9: warning: returning void-valued expression hw/ssi/omap_spi.c:229:9: warning: returning void-valued expression hw/timer/omap_gptimer.c:447:9: warning: returning void-valued expression Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 10:55:14 +0000