summaryrefslogtreecommitdiff
path: root/hw/s390x
AgeCommit message (Collapse)Author
2021-03-09sysemu: Let VMChangeStateHandler take boolean 'running' argumentPhilippe Mathieu-Daudé
The 'running' argument from VMChangeStateHandler does not require other value than 0 / 1. Make it a plain boolean. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20210111152020.1422021-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-04virtio-ccw: commands on revision-less devicesCornelia Huck
The virtio standard specifies that any non-transitional device must reject commands prior to revision setting (which we do). Devices that are transitional need to assume revision 0 (legacy) if the driver sends a non-revision-setting command first in order to support legacy drivers. We neglected to do the latter. Fortunately, nearly everything worked as intended anyway; the only problem was not properly rejecting revision setting after some other command had been issued. Easy to fix by setting revision to 0 if we see a non-revision command on a legacy-capable revision-less device. Found by code inspection, not observed in the wild. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20210216111830.1087847-1-cohuck@redhat.com>
2021-03-04s390x/pci: restore missing Query PCI Function CLP dataMatthew Rosato
Some CLP response data was accidentally dropped when fixing endianness issues with the Query PCI Function CLP response. All of these values are sent as 0s to the guest for emulated devices, so the impact is only observed on passthrough devices. Fixes: a4e2fff1b104 ("s390x/pci: fix endianness issues") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <1613681609-9349-1-git-send-email-mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-03-04hw/s390x: fix build for virtio-9p-ccwHalil Pasic
Commit 2c44220d05 ("meson: convert hw/arch*"), which migrated the old Makefile.objs to meson.build accidentally excluded virtio-ccw-9p.c and thus the virtio-9p-ccw device from the build (and potentially also included the file virtio-ccw-blk.c twice in the source set). And since CONFIG_VIRTFS can't be used the way it was used here (see commit 2c9dce0196 ("meson: do not use CONFIG_VIRTFS")), the preconditions have to be written differently. Let's fix this! Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Fixes: 2c44220d05 ("meson: convert hw/arch*") Reported-by: Jakob Naucke <jakob.naucke@ibm.com> Cc: qemu-stable@nongnu.org Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210218034059.1096078-1-pasic@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2021-02-08s390: Recognize confidential-guest-support optionDavid Gibson
At least some s390 cpu models support "Protected Virtualization" (PV), a mechanism to protect guests from eavesdropping by a compromised hypervisor. This is similar in function to other mechanisms like AMD's SEV and POWER's PEF, which are controlled by the "confidential-guest-support" machine option. s390 is a slightly special case, because we already supported PV, simply by using a CPU model with the required feature (S390_FEAT_UNPACK). To integrate this with the option used by other platforms, we implement the following compromise: - When the confidential-guest-support option is set, s390 will recognize it, verify that the CPU can support PV (failing if not) and set virtio default options necessary for encrypted or protected guests, as on other platforms. i.e. if confidential-guest-support is set, we will either create a guest capable of entering PV mode, or fail outright. - If confidential-guest-support is not set, guests might still be able to enter PV mode, if the CPU has the right model. This may be a little surprising, but shouldn't actually be harmful. To start a guest supporting Protected Virtualization using the new option use the command line arguments: -object s390-pv-guest,id=pv0 -machine confidential-guest-support=pv0 Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2021-01-08Remove superfluous timer_del() callsPeter Maydell
This commit is the result of running the timer-del-timer-free.cocci script on the whole source tree. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
2021-01-01Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost-gl/tags/machine-next-pull-request' into staging Machine queue, 2020-12-23 Cleanup: * qdev code cleanup (Eduardo Habkost) Bug fix: * hostmem: Free host_nodes list right after visited (Keqian Zhu) # gpg: Signature made Wed 23 Dec 2020 21:25:58 GMT # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost-gl/tags/machine-next-pull-request: bugfix: hostmem: Free host_nodes list right after visited qdev: Avoid unnecessary DeviceState* variable at set_prop_arraylen() qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr() qdev: Move qdev_prop_tpm declaration to tpm_prop.h qdev: Make qdev_class_add_property() more flexible qdev: Make PropertyInfo.create return ObjectProperty* qdev: Move dev->realized check to qdev_property_set() qdev: Wrap getters and setters in separate helpers qdev: Add name argument to PropertyInfo.create method qdev: Add name parameter to qdev_class_add_property() qdev: Avoid using prop->name unnecessarily qdev: Get just property name at error_set_from_qdev_prop_error() sparc: Use DEFINE_PROP for nwindows property qdev: Reuse DEFINE_PROP in all DEFINE_PROP_* macros qdev: Move softmmu properties to qdev-properties-system.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-21s390x/pci: Fix memory_region_access_valid callMatthew Rosato
In pcistb_service_handler, a call is made to validate that the memory region can be accessed. However, the call is made using the entire length of the pcistb operation, which can be larger than the allowed memory access size (8). Since we already know that the provided buffer is a multiple of 8, fix the call to memory_region_access_valid to iterate over the memory region in the same way as the subsequent call to memory_region_dispatch_write. Fixes: 863f6f52b7 ("s390: implement pci instructions") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Message-Id: <1608243397-29428-3-git-send-email-mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-12-21s390x/pci: fix pcistb lengthMatthew Rosato
In pcistb_service_call, we are grabbing 8 bits from a guest register to indicate the length of the store operation -- but per the architecture the length is actually defined by 13 bits of the guest register. Fixes: 863f6f52b7 ("s390: implement pci instructions") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1608243397-29428-2-git-send-email-mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-12-18qdev: Rename qdev_get_prop_ptr() to object_field_prop_ptr()Eduardo Habkost
The function will be moved to common QOM code, as it is not specific to TYPE_DEVICE anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20201211220529.2290218-31-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-18qdev: Move dev->realized check to qdev_property_set()Eduardo Habkost
Every single qdev property setter function manually checks dev->realized. We can just check dev->realized inside qdev_property_set() instead. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20201211220529.2290218-24-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-18qdev: Get just property name at error_set_from_qdev_prop_error()Eduardo Habkost
Replace `Property *prop` parameter with `char *name`, to reduce dependency of getter and setter functions on the Property struct (which will be changed in following patches). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20201211220529.2290218-19-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-15qdev: Make error_set_from_qdev_prop_error() get Object* argumentEduardo Habkost
Make the code more generic and not specific to TYPE_DEVICE. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> #s390 parts Message-Id: <20201211220529.2290218-13-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-15qdev: Make qdev_get_prop_ptr() get Object* argEduardo Habkost
Make the code more generic and not specific to TYPE_DEVICE. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> #s390 parts Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20201211220529.2290218-10-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-11Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * Fix for NULL segments (Bin Meng) * Support for 32768 CPUs on x86 without IOMMU (David) * PDEP/PEXT fix and testcase (myself) * Remove bios_name and ram_size globals (myself) * qemu_init rationalization (myself) * Update kernel-doc (myself + upstream patches) * Propagate MemTxResult across DMA and PCI functions (Philippe) * Remove master/slave when applicable (Philippe) * WHPX support for in-kernel irqchip (Sunil) # gpg: Signature made Thu 10 Dec 2020 17:21:50 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (113 commits) scripts: kernel-doc: remove unnecessary change wrt Linux Revert "docs: temporarily disable the kernel-doc extension" scripts: kernel-doc: use :c:union when needed scripts: kernel-doc: split typedef complex regex scripts: kernel-doc: fix typedef parsing Revert "kernel-doc: Handle function typedefs that return pointers" Revert "kernel-doc: Handle function typedefs without asterisks" scripts: kernel-doc: try to use c:function if possible scripts: kernel-doc: fix line number handling scripts: kernel-doc: allow passing desired Sphinx C domain dialect scripts: kernel-doc: don't mangle with parameter list scripts: kernel-doc: fix typedef identification scripts: kernel-doc: reimplement -nofunction argument scripts: kernel-doc: fix troubles with line counts scripts: kernel-doc: use a less pedantic markup for funcs on Sphinx 3.x scripts: kernel-doc: make it more compatible with Sphinx 3.x Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later" Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments" scripts: kernel-doc: add support for typedef enum kernel-doc: add support for ____cacheline_aligned attribute ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-10vl: extract softmmu/datadir.cPaolo Bonzini
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10s390x: do not use ram_size globalPaolo Bonzini
Use the machine properties instead. Cc: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10s390: remove bios_namePaolo Bonzini
Cc: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201026143028.3034018-13-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10Clean up includesMarkus Armbruster
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the changes to the following files manually reverted: contrib/libvhost-user/libvhost-user-glib.h contrib/libvhost-user/libvhost-user.c contrib/libvhost-user/libvhost-user.h contrib/plugins/hotblocks.c contrib/plugins/hotpages.c contrib/plugins/howvec.c contrib/plugins/lockstep.c linux-user/mips64/cpu_loop.c linux-user/mips64/signal.c linux-user/sparc64/cpu_loop.c linux-user/sparc64/signal.c linux-user/x86_64/cpu_loop.c linux-user/x86_64/signal.c target/s390x/gen-features.c tests/fp/platform.h tests/migration/s390x/a-b-bios.c tests/plugin/bb.c tests/plugin/empty.c tests/plugin/insn.c tests/plugin/mem.c tests/test-rcu-simpleq.c tests/test-rcu-slist.c tests/test-rcu-tailq.c tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c contrib/plugins/, tests/plugin/, and tests/test-rcu-slist.c appear not to include osdep.h intentionally. The remaining reverts are the same as in commit bbfff19688d. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20201113061216.2483385-1-armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Alexander Bulekov <alxndr@bu.edu>
2020-12-08hw: add compat machines for 6.0Cornelia Huck
Add 6.0 machine types for arm/i440fx/q35/s390x/spapr. Signed-off-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20201109173928.1001764-1-cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-08memory: Add IOMMUTLBEventEugenio Pérez
This way we can tell between regular IOMMUTLBEntry (entry of IOMMU hardware) and notifications. In the notifications, we set explicitly if it is a MAPs or an UNMAP, instead of trusting in entry permissions to differentiate them. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20201116165506.31315-3-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2020-11-18s390x/pci: fix endianness issuesCornelia Huck
The zPCI group and function structures are big endian. However, we do not consistently store them as big endian locally, and are missing some conversions. Let's just store the structures as host endian instead and convert to big endian when actually handling the instructions retrieving the data. Also fix the layout of ClpReqQueryPciGrp: g is actually only 8 bit. This also fixes accesses on little endian hosts, and makes accesses on big endian hosts consistent. Fixes: 28dc86a07299 ("s390x/pci: use a PCI Group structure") Fixes: 9670ee752727 ("s390x/pci: use a PCI Function structure") Fixes: 1e7552ff5c34 ("s390x/pci: get zPCI function info from host") Signed-off-by: Cornelia Huck <cohuck@redhat.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20201118104202.1301363-1-cohuck@redhat.com>
2020-11-18s390x/pci: Unregister listeners before destroying IOMMU address spaceMatthew Rosato
Hot-unplugging a vfio-pci device on s390x causes a QEMU crash: qemu-system-s390x: ../softmmu/memory.c:2772: do_address_space_destroy: Assertion `QTAILQ_EMPTY(&as->listeners)' failed. In s390, the IOMMU address space is freed during device unplug but the associated vfio-pci device may not yet be finalized and therefore may still have a listener registered to the IOMMU address space. Commit a2166410ad74 ("spapr_pci: Unregister listeners before destroying the IOMMU address space") previously resolved this issue for spapr_pci. We are now seeing this in s390x; it would seem the possibility for this issue was already present but based on a bisect commit 2d24a6466154 ("device-core: use RCU for list of children of a bus") has now changed the timing such that it is now readily reproducible. Add logic to ensure listeners are removed before destroying the address space. Reported-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1605562955-21152-1-git-send-email-mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-11-18s390/kvm: fix diag318 propagation and reset functionalityCollin Walling
The Control Program Name Code (CPNC) portion of the diag318 info must be set within the SIE block of each VCPU in the configuration. The handler will iterate through each VCPU and dirty the diag318_info reg to be synced with KVM on a subsequent sync_regs call. Additionally, the diag318 info resets must be handled via userspace. As such, QEMU will reset this value for each VCPU during a modified clear, load normal, and load clear reset event. Fixes: fabdada9357b ("s390: guest support for diagnose 0x318") Signed-off-by: Collin Walling <walling@linux.ibm.com> Message-Id: <20201113221022.257054-1-walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-11-10s390x: Avoid variable size warning in ipl.hDaniele Buono
S390IPLState contains two IplParameterBlock, which may in turn have either a IPLBlockPV or a IplBlockFcp, both ending with a variable sized field (an array). This causes a warning with clang 11 or greater, which checks that variable sized type are only allocated at the end of the struct: In file included from ../qemu-cfi-v3/target/s390x/diag.c:21: ../qemu-cfi-v3/hw/s390x/ipl.h:161:23: error: field 'iplb' with variable sized type 'IplParameterBlock' (aka 'union IplParameterBlock') not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] IplParameterBlock iplb; ^ ../qemu-cfi-v3/hw/s390x/ipl.h:162:23: error: field 'iplb_pv' with variable sized type 'IplParameterBlock' (aka 'union IplParameterBlock') not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] IplParameterBlock iplb_pv; In this case, however, the warning is a false positive, because IPLBlockPV and IplBlockFcp are allocated in a union wrapped at 4K, making the union non-variable sized. Fix the warning by turning the two variable sized arrays into arrays of size 0. This avoids the compiler error and should produce the same code. Signed-off-by: Daniele Buono <dbuono@linux.vnet.ibm.com> Message-Id: <20201105221905.1350-5-dbuono@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-11-05s390x: fix build for --without-default-devicesCornelia Huck
s390-pci-vfio.c calls into the vfio code, so we need it to be built conditionally on vfio (which implies CONFIG_LINUX). Fixes: cd7498d07fbb ("s390x/pci: Add routine to get the vfio dma available count") Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20201103123237.718242-1-cohuck@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-11-01s390x/pci: get zPCI function info from hostMatthew Rosato
We use the capability chains of the VFIO_DEVICE_GET_INFO ioctl to retrieve the CLP information that the kernel exports. To be compatible with previous kernel versions we fall back on previous predefined values, same as the emulation values, when the ioctl is found to not support capability chains. If individual CLP capabilities are not found, we fall back on default values for only those capabilities missing from the chain. This patch is based on work previously done by Pierre Morel. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: non-Linux build fixes] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: use a PCI Function structurePierre Morel
We use a ClpRspQueryPci structure to hold the information related to a zPCI Function. This allows us to be ready to support different zPCI functions and to retrieve the zPCI function information from the host. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: clean up s390 PCI groupsMatthew Rosato
Add a step to remove all stashed PCI groups to avoid stale data between machine resets. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: use a PCI Group structurePierre Morel
We use a S390PCIGroup structure to hold the information related to a zPCI Function group. This allows us to be ready to support multiple groups and to retrieve the group information from the host. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Honor DMA limits set by vfioMatthew Rosato
When an s390 guest is using lazy unmapping, it can result in a very large number of oustanding DMA requests, far beyond the default limit configured for vfio. Let's track DMA usage similar to vfio in the host, and trigger the guest to flush their DMA mappings before vfio runs out. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: non-Linux build fixes] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Add routine to get the vfio dma available countMatthew Rosato
Create new files for separating out vfio-specific work for s390 pci. Add the first such routine, which issues VFIO_IOMMU_GET_INFO ioctl to collect the current dma available count. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [aw: Fix non-Linux build with CONFIG_LINUX] Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01s390x/pci: Move header files to include/hw/s390xMatthew Rosato
Seems a more appropriate location for them. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-10-22s390x: pv: Remove sclp boundary checksJanosch Frank
The SCLP boundary cross check is done by the Ultravisor for a protected guest, hence we don't need to do it. As QEMU doesn't get a valid SCCB address in protected mode this is even problematic and can lead to QEMU reporting a false boundary cross error. Fixes: db13387ca0 ("s390/sclp: rework sclp boundary checks") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <20201022103135.126033-2-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-22s390x/s390-virtio-ccw: Reset PCI devices during subsystem resetMatthew Rosato
Currently, a subsystem reset event leaves PCI devices enabled, causing issues post-reset in the guest (an example would be after a kexec). These devices need to be reset during a subsystem reset, allowing them to be properly re-enabled afterwards. Add the S390 PCI host bridge to the list of qdevs to be reset during subsystem reset. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: qemu-stable@nongnu.org Message-Id: <1602767767-32713-1-git-send-email-mjrosato@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-09error: Use error_fatal to simplify obvious fatal errors (again)Markus Armbruster
Patch created mechanically by rerunning: $ spatch --in-place --sp-file scripts/coccinelle/use-error_fatal.cocci \ --macro-file scripts/cocci-macro-file.h --use-gitgrep . Variables now unused dropped manually. Cc: Eric Auger <eric.auger@redhat.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200722084048.1726105-5-armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-10-02s390: guest support for diagnose 0x318Collin Walling
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage of diagnostic information that is collected by the firmware in the case of hardware/firmware service events. QEMU handles the instruction by storing the info in the CPU state. A subsequent register sync will communicate the data to the hypervisor. QEMU handles the migration via a VM State Description. This feature depends on the Extended-Length SCCB (els) feature. If els is not present, then a warning will be printed and the SCLP bit that allows the Linux kernel to execute the instruction will not be set. Availability of this instruction is determined by byte 134 (aka fac134) bit 0 of the SCLP Read Info block. This coincidentally expands into the space used for CPU entries, which means VMs running with the diag318 capability may not be able to read information regarding all CPUs unless the guest kernel supports an extended-length SCCB. This feature is not supported in protected virtualization mode. Signed-off-by: Collin Walling <walling@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-9-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: add extended-length sccb support for kvm guestCollin Walling
As more features and facilities are added to the Read SCP Info (RSCPI) response, more space is required to store them. The space used to store these new features intrudes on the space originally used to store CPU entries. This means as more features and facilities are added to the RSCPI response, less space can be used to store CPU entries. With the Extended-Length SCCB (ELS) facility, a KVM guest can execute the RSCPI command and determine if the SCCB is large enough to store a complete reponse. If it is not large enough, then the required length will be set in the SCCB header. The caller of the SCLP command is responsible for creating a large-enough SCCB to store a complete response. Proper checking should be in place, and the caller should execute the command once-more with the large-enough SCCB. This facility also enables an extended SCCB for the Read CPU Info (RCPUI) command. When this facility is enabled, the boundary violation response cannot be a result from the RSCPI, RSCPI Forced, or RCPUI commands. In order to tolerate kernels that do not yet have full support for this feature, a "fixed" offset to the start of the CPU Entries within the Read SCP Info struct is set to allow for the original 248 max entries when this feature is disabled. Additionally, this is introduced as a CPU feature to protect the guest from migrating to a machine that does not support storing an extended SCCB. This could otherwise hinder the VM from being able to read all available CPU entries after migration (such as during re-ipl). Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-7-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: use cpu offset to locate cpu entriesCollin Walling
The start of the CPU entry region in the Read SCP Info response data is denoted by the offset_cpu field. As such, QEMU needs to begin creating entries at this address. This is in preparation for when Read SCP Info inevitably introduces new bytes that push the start of the CPUEntry field further away. Read CPU Info is unlikely to ever change, so let's not bother accounting for the offset there. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-6-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: check sccb len before filling in dataCollin Walling
The SCCB must be checked for a sufficient length before it is filled with any data. If the length is insufficient, then the SCLP command is suppressed and the proper response code is set in the SCCB header. While we're at it, let's cleanup the length check by placing the calculation inside a macro. Fixes: 832be0d8a3bb ("s390x: sclp: Report insufficient SCCB length") Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-5-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: read sccb from mem based on provided lengthCollin Walling
The header contained within the SCCB passed to the SCLP service call contains the actual length of the SCCB. Instead of allocating a static 4K size for the work sccb, let's allow for a variable size determined by the value in the header. The proper checks are already in place to ensure the SCCB length is sufficent to store a full response and that the length does not cross any explicitly-set boundaries. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-4-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: rework sclp boundary checksCollin Walling
Rework the SCLP boundary check to account for different SCLP commands (eventually) allowing different boundary sizes. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-3-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: get machine once during read scp/cpu infoCollin Walling
Functions within read scp/cpu info will need access to the machine state. Let's make a call to retrieve the machine state once and pass the appropriate data to the respective functions. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-2-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02hw/s390x/css: Remove double initializationPhilippe Mathieu-Daudé
Fix eventual copy/paste mistake introduced in commit bc994b74ea ("s390x/css: Use static initialization for channel_subsys fields"). Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200907024020.854465-1-philmd@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-09-29vhost-vsock-ccw: force virtio version 1Stefano Garzarella
virtio-vsock was introduced after the release of VIRTIO 1.0 specifications, so it should be 'modern-only'. This patch forces virtio version 1 as done for vhost-vsock-pci. To avoid migration issues, we force virtio version 1 only when legacy check is enabled in the new machine types (>= 5.1). Cc: qemu-stable@nongnu.org Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200921122506.82515-5-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29virtio: skip legacy support check on machine types less than 5.1Stefano Garzarella
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") added a check that returns an error if legacy support is on, but the device does not support legacy. Unfortunately some devices were wrongly declared legacy capable even if they were not (e.g vhost-vsock). To avoid migration issues, we add a virtio-device property (x-disable-legacy-check) to skip the legacy error, printing a warning instead, for machine types < 5.1. Cc: qemu-stable@nongnu.org Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200921122506.82515-2-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29cphp: remove deprecated cpu-add command(s)Igor Mammedov
These were deprecated since 4.0, remove both HMP and QMP variants. Users should use device_add command instead. To get list of possible CPUs and options, use 'info hotpluggable-cpus' HMP or query-hotpluggable-cpus QMP command. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200915120403.1074579-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23virtio: add vhost-user-fs-ccw deviceHalil Pasic
Wire up the CCW device for vhost-user-fs. Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Message-id: 20200901150019.29229-2-mhartmay@linux.ibm.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 05:29:47 +0000