summaryrefslogtreecommitdiff
path: root/hw/s390x/sclp.c
AgeCommit message (Collapse)Author
2021-09-06s390x: Replace PAGE_SIZE, PAGE_SHIFT and PAGE_MASKThomas Huth
The PAGE_SIZE macro is causing trouble on Alpine Linux since it clashes with a macro from a system header there. We already have the TARGET_PAGE_SIZE, TARGET_PAGE_MASK and TARGET_PAGE_BITS macros in QEMU anyway, so let's simply replace the PAGE_SIZE, PAGE_MASK and PAGE_SHIFT macro with their TARGET_* counterparts. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/572 Message-Id: <20210901125800.611183-1-thuth@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-02Do not include cpu.h if it's not really necessaryThomas Huth
Stop including cpu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-4-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-05-02Do not include sysemu/sysemu.h if it's not really necessaryThomas Huth
Stop including sysemu/sysemu.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-2-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-10-22s390x: pv: Remove sclp boundary checksJanosch Frank
The SCLP boundary cross check is done by the Ultravisor for a protected guest, hence we don't need to do it. As QEMU doesn't get a valid SCCB address in protected mode this is even problematic and can lead to QEMU reporting a false boundary cross error. Fixes: db13387ca0 ("s390/sclp: rework sclp boundary checks") Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Collin Walling <walling@linux.ibm.com> Acked-by: Halil Pasic <pasic@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Message-Id: <20201022103135.126033-2-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390: guest support for diagnose 0x318Collin Walling
DIAGNOSE 0x318 (diag318) is an s390 instruction that allows the storage of diagnostic information that is collected by the firmware in the case of hardware/firmware service events. QEMU handles the instruction by storing the info in the CPU state. A subsequent register sync will communicate the data to the hypervisor. QEMU handles the migration via a VM State Description. This feature depends on the Extended-Length SCCB (els) feature. If els is not present, then a warning will be printed and the SCLP bit that allows the Linux kernel to execute the instruction will not be set. Availability of this instruction is determined by byte 134 (aka fac134) bit 0 of the SCLP Read Info block. This coincidentally expands into the space used for CPU entries, which means VMs running with the diag318 capability may not be able to read information regarding all CPUs unless the guest kernel supports an extended-length SCCB. This feature is not supported in protected virtualization mode. Signed-off-by: Collin Walling <walling@linux.ibm.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Acked-by: Thomas Huth <thuth@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-9-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: add extended-length sccb support for kvm guestCollin Walling
As more features and facilities are added to the Read SCP Info (RSCPI) response, more space is required to store them. The space used to store these new features intrudes on the space originally used to store CPU entries. This means as more features and facilities are added to the RSCPI response, less space can be used to store CPU entries. With the Extended-Length SCCB (ELS) facility, a KVM guest can execute the RSCPI command and determine if the SCCB is large enough to store a complete reponse. If it is not large enough, then the required length will be set in the SCCB header. The caller of the SCLP command is responsible for creating a large-enough SCCB to store a complete response. Proper checking should be in place, and the caller should execute the command once-more with the large-enough SCCB. This facility also enables an extended SCCB for the Read CPU Info (RCPUI) command. When this facility is enabled, the boundary violation response cannot be a result from the RSCPI, RSCPI Forced, or RCPUI commands. In order to tolerate kernels that do not yet have full support for this feature, a "fixed" offset to the start of the CPU Entries within the Read SCP Info struct is set to allow for the original 248 max entries when this feature is disabled. Additionally, this is introduced as a CPU feature to protect the guest from migrating to a machine that does not support storing an extended SCCB. This could otherwise hinder the VM from being able to read all available CPU entries after migration (such as during re-ipl). Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-7-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: use cpu offset to locate cpu entriesCollin Walling
The start of the CPU entry region in the Read SCP Info response data is denoted by the offset_cpu field. As such, QEMU needs to begin creating entries at this address. This is in preparation for when Read SCP Info inevitably introduces new bytes that push the start of the CPUEntry field further away. Read CPU Info is unlikely to ever change, so let's not bother accounting for the offset there. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-6-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: check sccb len before filling in dataCollin Walling
The SCCB must be checked for a sufficient length before it is filled with any data. If the length is insufficient, then the SCLP command is suppressed and the proper response code is set in the SCCB header. While we're at it, let's cleanup the length check by placing the calculation inside a macro. Fixes: 832be0d8a3bb ("s390x: sclp: Report insufficient SCCB length") Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-5-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: read sccb from mem based on provided lengthCollin Walling
The header contained within the SCCB passed to the SCLP service call contains the actual length of the SCCB. Instead of allocating a static 4K size for the work sccb, let's allow for a variable size determined by the value in the header. The proper checks are already in place to ensure the SCCB length is sufficent to store a full response and that the length does not cross any explicitly-set boundaries. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-4-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: rework sclp boundary checksCollin Walling
Rework the SCLP boundary check to account for different SCLP commands (eventually) allowing different boundary sizes. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-3-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-10-02s390/sclp: get machine once during read scp/cpu infoCollin Walling
Functions within read scp/cpu info will need access to the machine state. Let's make a call to retrieve the machine state once and pass the appropriate data to the respective functions. Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20200915194416.107460-2-walling@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-07-10error: Eliminate error_propagate() manuallyMarkus Armbruster
When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. The previous two commits did that for sufficiently simple cases with Coccinelle. Do it for several more manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-37-armbru@redhat.com>
2020-07-10qdev: Use returned bool to check for qdev_realize() etc. failureMarkus Armbruster
Convert foo(..., &err); if (err) { ... } to if (!foo(..., &err)) { ... } for qdev_realize(), qdev_realize_and_unref(), qbus_realize() and their wrappers isa_realize_and_unref(), pci_realize_and_unref(), sysbus_realize(), sysbus_realize_and_unref(), usb_realize_and_unref(). Coccinelle script: @@ identifier fun = { isa_realize_and_unref, pci_realize_and_unref, qbus_realize, qdev_realize, qdev_realize_and_unref, sysbus_realize, sysbus_realize_and_unref, usb_realize_and_unref }; expression list args, args2; typedef Error; Error *err; @@ - fun(args, &err, args2); - if (err) + if (!fun(args, &err, args2)) { ... } Chokes on hw/arm/musicpal.c's lcd_refresh() with the unhelpful error message "no position information". Nothing to convert there; skipped. Fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. A few line breaks tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200707160613.848843-5-armbru@redhat.com>
2020-06-15qdev: Convert bus-less devices to qdev_realize() with CoccinelleMarkus Armbruster
All remaining conversions to qdev_realize() are for bus-less devices. Coccinelle script: // only correct for bus-less @dev! @@ expression errp; expression dev; @@ - qdev_init_nofail(dev); + qdev_realize(dev, NULL, &error_fatal); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(OBJECT(dev), true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); @ depends on !(file in "hw/core/qdev.c") && !(file in "hw/core/bus.c")@ expression errp; expression dev; symbol true; @@ - object_property_set_bool(dev, true, "realized", errp); + qdev_realize(DEVICE(dev), NULL, errp); Note that Coccinelle chokes on ARMSSE typedef vs. macro in hw/arm/armsse.c. Worked around by temporarily renaming the macro for the spatch run. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-57-armbru@redhat.com>
2020-06-15sysbus: Convert to sysbus_realize() etc. with CoccinelleMarkus Armbruster
Convert from qdev_realize(), qdev_realize_and_unref() with null @bus argument to sysbus_realize(), sysbus_realize_and_unref(). Coccinelle script: @@ expression dev, errp; @@ - qdev_realize(DEVICE(dev), NULL, errp); + sysbus_realize(SYS_BUS_DEVICE(dev), errp); @@ expression sysbus_dev, dev, errp; @@ + sysbus_dev = SYS_BUS_DEVICE(dev); - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); - sysbus_dev = SYS_BUS_DEVICE(dev); @@ expression sysbus_dev, dev, errp; expression expr; @@ sysbus_dev = SYS_BUS_DEVICE(dev); ... when != dev = expr; - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(sysbus_dev, errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(DEVICE(dev), NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); @@ expression dev, errp; @@ - qdev_realize_and_unref(dev, NULL, errp); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp); Whitespace changes minimized manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-46-armbru@redhat.com> [Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
2020-06-15qdev: Convert uses of qdev_set_parent_bus() manuallyMarkus Armbruster
Same transformation as in the previous commit. Manual, because convincing Coccinelle to transform these cases is somewhere between not worthwhile and infeasible (at least for me). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200610053247.1583243-13-armbru@redhat.com>
2020-05-15various: Remove unnecessary OBJECT() castPhilippe Mathieu-Daudé
The OBJECT() macro is defined as: #define OBJECT(obj) ((Object *)(obj)) Remove the unnecessary OBJECT() casts when we already know the pointer is of Object type. Patch created mechanically using spatch with this script: @@ typedef Object; Object *o; @@ - OBJECT(o) + o Acked-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: John Snow <jsnow@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200512070020.22782-3-f4bug@amsat.org> [Trivial rebase conflict in hw/s390x/sclp.c resolved]
2020-05-15qom: Drop parameter @errp of object_property_add() & friendsMarkus Armbruster
The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
2020-04-29s390x: protvirt: SCLP interpretationJanosch Frank
SCLP for a protected guest is done over the SIDAD, so we need to use the s390_cpu_pv_mem_* functions to access the SIDAD instead of guest memory when reading/writing SCBs. To not confuse the sclp emulation, we set 0x4000 as the SCCB address, since the function that injects the sclp external interrupt would reject a zero sccb address. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <20200319131921.2367-10-frankja@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-04-02vl/s390x: fixup ram sizes for compat machinesChristian Borntraeger
Older QEMU versions did fixup the ram size to match what can be reported via sclp. We need to mimic this behaviour for machine types 4.2 and older to not fail on inbound migration for memory sizes that do not fit. Old machines with proper aligned memory sizes are not affected. Alignment table: VM size (<=) | Alignment -------------------------- 1020M | 1M 2040M | 2M 4080M | 4M 8160M | 8M 16320M | 16M 32640M | 32M 65280M | 64M 130560M | 128M 261120M | 256M 522240M | 512M 1044480M | 1G 2088960M | 2G 4177920M | 4G 8355840M | 8G Suggested action is to replace unaligned -m value with a suitable aligned one or if a change to a newer machine type is possible, use a machine version >= 5.0. A future version might remove the compatibility handling. For machine types >= 5.0 we can simply use an increment size of 1M and use the full range of increment number which allows for all possible memory sizes. The old limitation of having a maximum of 1020 increments was added for standby memory, which we no longer support. With that we can now support even weird memory sizes like 10001234 MB. As we no longer fixup maxram_size as well, make other users use ram_size instead. Keep using maxram_size when setting the maximum ram size in KVM, as that will come in handy in the future when supporting memory hotplug (in contrast, storage keys and storage attributes for hotplugged memory will have to be migrated per RAM block in the future). Fixes: 3a12fc61af5c ("390x/s390-virtio-ccw: use memdev for RAM") Reported-by: Lukáš Doktor <ldoktor@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20200401123754.109602-1-borntraeger@de.ibm.com> [CH: fixed up message on memory size fixup] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2020-01-27s390x/sclp.c: remove unneeded label in sclp_service_call()Daniel Henrique Barboza
'out' label can be replaced by 'return' with the appropriate value. The 'r' integer, which is used solely to set the return value for this label, can also be removed. CC: Cornelia Huck <cohuck@redhat.com> CC: Halil Pasic <pasic@linux.ibm.com> CC: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200106182425.20312-39-danielhb413@gmail.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-09-30s390x: sclp: Report insufficient SCCB lengthClaudio Imbrenda
Return the correct error code when the SCCB buffer is too small to contain all of the output, for the Read SCP Information and Read CPU Information commands. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Message-Id: <1569591203-15258-5-git-send-email-imbrenda@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-30s390x: sclp: fix error handling for oversize control blocksJanosch Frank
Requests over 4k are not a spec exception. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Message-Id: <1569591203-15258-4-git-send-email-imbrenda@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-30s390x: sclp: boundary checkJanosch Frank
All sclp codes need to be checked for page boundary violations. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Message-Id: <1569591203-15258-3-git-send-email-imbrenda@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-09-30s390x: sclp: refactor invalid command checkJanosch Frank
Invalid command checking has to be done before the boundary check, refactoring it now allows to insert the boundary check at the correct place later. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.ibm.com> Message-Id: <1569591203-15258-2-git-send-email-imbrenda@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2019-07-05hw/s390x: Replace global smp variables with machine smp propertiesLike Xu
The global smp variables in s390x are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-7-like.xu@linux.intel.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> [ehabkost: fix build failure at VCPU_IRQ_BUF_SIZE] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> fixup! hw/s390x: Replace global smp variables with machine smp properties Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-07-30s390x/sclp: fix maxram calculationChristian Borntraeger
We clamp down ram_size to match the sclp increment size. We do not do the same for maxram_size, which means for large guests with some sizes (e.g. -m 50000) maxram_size differs from ram_size. This can break other code (e.g. CMMA migration) which uses maxram_size to calculate the number of pages and then throws some errors. Fixes: 82fab5c5b90e468f3e9d54c ("s390x/sclp: remove memory hotplug support") Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: qemu-stable@nongnu.org CC: David Hildenbrand <david@redhat.com> Message-Id: <1532959766-53343-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-07-02hw/s390x: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180625124238.25339-20-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-26s390x/sclp: remove memory hotplug supportDavid Hildenbrand
From an architecture point of view, nothing can be mapped into the address space on s390x. All there is is memory. Therefore there is also not really an interface to communicate such information to the guest. All we can do is specify the maximum ram address and guests can probe in that range if memory is available and usable (TPROT). Also memory hotplug is strange. The guest can decide at some point in time to add / remove memory in some range. While the hypervisor can deny to online an increment, all increments have to be predefined and there is no way of telling the guest about a newly "hotplugged" increment. So if we specify right now e.g. -m 2G,slots=2,maxmem=20G An ordinary fedora guest will happily online (hotplug) all memory, resulting in a guest consuming 20G. So it really behaves rather like -m 22G There is no way to hotplug memory from the outside like on other architectures. This is of course bad for upper management layers. As the guest can create/delete memory regions while it is running, of course migration support is not available and tricky to implement. With virtualization, it is different. We might want to map something into guest address space (e.g. fake DAX devices) and not detect it automatically as memory. So we really want to use the maxmem and slots parameter just like on all other architectures. Such devices will have to expose the applicable memory range themselves. To finally be able to provide memory hotplug to guests, we will need a new paravirtualized interface to do that (e.g. something into the direction of virtio-mem). This implies, that maxmem cannot be used for s390x memory hotplug anymore and has to go. This simplifies the code quite a bit. As migration support is not working, this change cannot really break migration as guests without slots and maxmem don't see the SCLP features. Also, the ram size calculation does not change. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180219174231.10874-1-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com> [CH: tweaked patch description, as discussed on list] Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-01-22s390x/sclp: fix missing be conversionDavid Hildenbrand
Linux crashes right now if maxmem > mem is specified on the command line. On s390x, the guest can hotplug memory itself right now - very weird - and e.g. Fedora 27 will simply add all memory it can when booting. So now, we have at least the same behavior on TCG and KVM. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20171218224616.21030-3-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2018-01-22s390x/sclp: fixup highest CPU addressChristian Borntraeger
The highest cpu address is not the same as max_cpus. max_cpus counts from 1 while the cpu address starts at 0. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Message-Id: <20171219082807.84494-1-borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-10-06s390x/sclp: Mark the sclp device with user_creatable = falseThomas Huth
The "sclp" device is just an internal device that can not be instantiated by the users. If they try to use it, they only get a simple error message: $ qemu-system-s390x -nographic -device sclp qemu-system-s390x: Option '-device s390-sclp-event-facility' cannot be handled by this machine Since sclp_init() tries to create a TYPE_SCLP_EVENT_FACILITY which is a non-pluggable sysbus device, there is really no way that the "sclp" device can be used by the user, so let's set the user_creatable = false accordingly. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1507125199-22562-1-git-send-email-thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: Farhan Ali <alifm@linux.vnet.ibm.com> Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-09-19s390x: generate sclp cpu information from possible_cpusDavid Hildenbrand
This is the first step to allow hot plugging of CPUs in a non-sequential order. If a cpu is available ("plugged") can directly be decided by looking at the cpu state pointer. This makes sure, that really only cpus attached to the machine are reported. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170913132417.24384-22-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30s390x: drop inclusion of sysemu/kvm.h from some filesDavid Hildenbrand
s390-stattrib.c needs definition of TARGET_PAGE_SIZE, solve it via cpu.h. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-8-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30s390x/kvm: drop KVMState parameter from s390_get_memslot_count()David Hildenbrand
Not needed at that point. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20170818114353.13455-2-david@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-30s390x/sclp: properly guard pci-specific functionsCornelia Huck
If we do not provide zpci, pci reconfiguration via sclp is not available either. I/O adapter configuration, however, should always be present. Rename the values that refer to I/O adapter configuration (instead of only pci) to make things clearer. Move length checking of the sccb for I/O adapter configuration into the common sclp code (out of the pci code). This also fixes an issue that the pci code would refer to a field in the sccb before checking whether it was actually long enough. Check for the adapter type in the sccb and return unrecognized adapter type if the guest tries to issue I/O adapter configure/deconfigure for a type other than pci or for pci if the zpci facility is not provided. Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-07-14hw: Use new memory_region_init_{ram, rom, rom_device}() functionsPeter Maydell
Use the new functions memory_region_init_{ram,rom,rom_device}() instead of manually calling the _nomigrate() version and then vmstate_register_ram_global(). Patch automatically created using coccinelle script: spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw (As it turns out, there are no instances of the rom and rom_device functions that are caught by this script.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
2017-07-14memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()Peter Maydell
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate(). This leaves the way clear for us to provide a memory_region_init_ram() which does handle migration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-05-10Merge remote-tracking branch 'mjt/tags/trivial-patches-fetch' into stagingStefan Hajnoczi
trivial patches for 2017-05-10 # gpg: Signature made Wed 10 May 2017 03:19:30 AM EDT # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * mjt/tags/trivial-patches-fetch: (23 commits) tests: Remove redundant assignment MAINTAINERS: Update paths for AioContext implementation MAINTAINERS: Update paths for main loop jazz_led: fix bad snprintf tests: Ignore another built executable (test-hmp) scripts: Switch to more portable Perl shebang scripts/qemu-binfmt-conf.sh: Fix shell portability issue virtfs: allow a device id to be specified in the -virtfs option hw/core/generic-loader: Fix crash when running without CPU virtio-blk: Remove useless condition around g_free() qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip use _Static_assert in QEMU_BUILD_BUG_ON channel-file: fix wrong parameter comments block: Make 'replication_state' an enum util: Use g_malloc/g_free in envlist.c qga: fix compiler warnings (clang 5) device_tree: fix compiler warnings (clang 5) usb-ccid: make ccid_write_data_block() cope with null buffers tests: Ignore more test executables Add 'none' as type for drive's if option ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-07Remove reduntant qemu: from error functionsIshani Chugh
This patch removes redundant "qemu:" from error functions. The link to the bitesized task is: http://wiki.qemu-project.org/Contribute/BiteSizedTasks#Error_checking Signed-off-by: Ishani Chugh <chugh.ishani@research.iiit.ac.in> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-05-02hw/s390x/sclp: update LOADPARM in SCP InfoFarhan Ali
LOADPARM has two copies: 1. in SCP Information Block 2. in IPL Information Parameter Block So, update SCLP intrinsics now. We always store LOADPARM in SCP information block even if we don't have a valid IPL Information Parameter Block. Initial patch from Eugene (jno) Dvurechenski. Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com> Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-15s390x: remove useless castLaurent Vivier
This patch is the result of coccinelle script scripts/coccinelle/typecast.cocci CC: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-09-06s390x/sclp: propagate hmfaiDavid Hildenbrand
hmfai is provided on CPU models >= z196. Let's propagate it properly. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-19-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06s390x/sclp: propagate the mha via sclpDavid Hildenbrand
The mha is provided in the CPU model, so get any CPU and extract the value. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-18-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06s390x/sclp: propagate the ibc val (lowest and unblocked ibc)David Hildenbrand
If we have a lowest ibc, we can indicate the ibc to the guest. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-17-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06s390x/sclp: indicate sclp featuresDavid Hildenbrand
We have three different blocks in the SCLP read-SCP information response that indicate sclp features. Let's prepare propagation. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-16-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06s390x/sclp: factor out preparation of cpu entriesDavid Hildenbrand
Let's factor out the common code of "read cpu info" and "read scp info". This will make the introduction of new cpu entry fields easier. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-14-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-05s390/sclp: cache the sclp deviceChristian Borntraeger
With the current code a simple sclp command takes about 13000 ns The biggest part seems to be the resolver of the object model. By caching the sclp device the time for an sclp command goes down to 2500ns. Talking about real life scenarios, this change doubles the speed of the sclp console when sending single bytes outputs to /dev/console. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-05-17s390x/pci: separate s390_sclp_configure functionYi Min Zhao
Split s390_sclp_configure() into separate functions for sclp configuring and deconfiguring in order to make the code more readable. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 06:23:54 +0000