summaryrefslogtreecommitdiff
path: root/hw/riscv
AgeCommit message (Collapse)Author
2019-09-17riscv: sifive_u: Update model and compatible strings in device treeBin Meng
This updates model and compatible strings to use the same strings as used in the Linux kernel device tree (hifive-unleashed-a00.dts). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Remove handcrafted clock nodes for UART and ethernetBin Meng
In the past we did not have a model for PRCI, hence two handcrafted clock nodes ("/soc/ethclk" and "/soc/uartclk") were created for the purpose of supplying hard-coded clock frequencies. But now since we have added the PRCI support in QEMU, we don't need them any more. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Fix broken GEM supportBin Meng
At present the GEM support in sifive_u machine is seriously broken. The GEM block register base was set to a weird number (0x100900FC), which for no way could work with the cadence_gem model in QEMU. Not like other GEM variants, the FU540-specific GEM has a management block to control 10/100/1000Mbps link speed changes, that is mapped to 0x100a0000. We can simply map it into MMIO space without special handling using create_unimplemented_device(). Update the GEM node compatible string to use the official name used by the upstream Linux kernel, and add the management block reg base & size to the <reg> property encoding. Tested with upstream U-Boot and Linux kernel MACB drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Instantiate OTP memory with a serial numberBin Meng
This adds an OTP memory with a given serial number to the sifive_u machine. With such support, the upstream U-Boot for sifive_fu540 boots out of the box on the sifive_u machine. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Implement a model for SiFive FU540 OTPBin Meng
This implements a simple model for SiFive FU540 OTP (One-Time Programmable) Memory interface, primarily for reading out the stored serial number from the first 1 KiB of the 16 KiB OTP memory reserved by SiFive for internal use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Change UART node name in device treeBin Meng
OpenSBI for fu540 does DT fix up (see fu540_modify_dt()) by updating chosen "stdout-path" to point to "/soc/serial@...", and U-Boot will use this information to locate the serial node and probe its driver. However currently we generate the UART node name as "/soc/uart@...", causing U-Boot fail to find the serial node in DT. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update UART base addresses and IRQsBin Meng
This updates the UART base address and IRQs to match the hardware. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Reference PRCI clocks in UART and ethernet nodesBin Meng
Now that we have added a PRCI node, update existing UART and ethernet nodes to reference PRCI as their clock sources, to keep in sync with the Linux kernel device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Add PRCI block to the SoCBin Meng
Add PRCI mmio base address and size mappings to sifive_u machine, and generate the corresponding device tree node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Generate hfclk and rtcclk nodesBin Meng
To keep in sync with Linux kernel device tree, generate hfclk and rtcclk nodes in the device tree, to be referenced by PRCI node. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Implement PRCI model for FU540Bin Meng
This adds a simple PRCI model for FU540 (sifive_u). It has different register layout from the existing PRCI model for FE310 (sifive_e). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update PLIC hart topology configuration stringBin Meng
With heterogeneous harts config, the PLIC hart topology configuration string are "M,MS,.." because of the monitor hart #0. Suggested-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Update hart configuration to reflect the real FU540 SoCBin Meng
The FU540-C000 includes a 64-bit E51 RISC-V core and four 64-bit U54 RISC-V cores. Currently the sifive_u machine only populates 4 U54 cores. Update the max cpu number to 5 to reflect the real hardware, by creating 2 CPU clusters as containers for RISC-V hart arrays to populate heterogeneous harts. The cpu nodes in the generated DTS have been updated as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Set the minimum number of cpus to 2Bin Meng
It is not useful if we only have one management CPU. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [Palmer: Set default CPUs to 2] Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hart: Add a "hartid-base" property to RISC-V hart arrayBin Meng
At present each hart's hartid in a RISC-V hart array is assigned the same value of its index in the hart array. But for a system that has multiple hart arrays, this is not the case any more. Add a new "hartid-base" property so that hartid number can be assigned based on the property value. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hart: Extract hart realize to a separate routineBin Meng
Currently riscv_harts_realize() creates all harts based on the same cpu type given in the hart array property. With current implementation it can only create homogeneous harts. Exact the hart realize to a separate routine in preparation for supporting multiple hart arrays. Note the file header says the RISC-V hart array holds the state of a heterogeneous array of RISC-V harts, which is not true. Update the comment to mention homogeneous array of RISC-V harts. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: Drop sifive_mmio_emulate()Bin Meng
Use create_unimplemented_device() instead. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: prci: Update the PRCI register block sizeBin Meng
Currently the PRCI register block size is set to 0x8000, but in fact 0x1000 is enough, which is also what the manual says. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_e: prci: Fix a typo of hfxosccfg register programmingBin Meng
For hfxosccfg register programming, SIFIVE_E_PRCI_HFXOSCCFG_RDY and SIFIVE_E_PRCI_HFXOSCCFG_EN should be used. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive: Rename sifive_prci.{c, h} to sifive_e_prci.{c, h}Bin Meng
Current SiFive PRCI model only works with sifive_e machine, as it only emulates registers or PRCI block in the FE310 SoC. Rename the file name to make it clear that it is for sifive_e. This also prefix "sifive_e"/"SIFIVE_E" for all macros, variables and functions. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Remove the unnecessary include of prci headerBin Meng
sifive_u machine does not use PRCI as of today. Remove the prci header inclusion. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Remove the unnecessary include of target/riscv/cpu.hBin Meng
The inclusion of "target/riscv/cpu.h" is unnecessary in various sifive model drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Change to use qemu_log_mask(LOG_GUEST_ERROR, ...) insteadBin Meng
Replace the call to hw_error() with qemu_log_mask(LOG_GUEST_ERROR,...) in various sifive models. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Change create_fdt() to return voidBin Meng
There is no need to return fdt at the end of create_fdt() because it's already saved in s->fdt. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Remove not needed PLIC properties in device treeBin Meng
This removes "reg-names" and "riscv,max-priority" properties of the PLIC node from device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Use qemu_fdt_setprop_cell() for property with only 1 cellBin Meng
Some of the properties only have 1 cell so we should use qemu_fdt_setprop_cell() instead of qemu_fdt_setprop_cells(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Remove superfluous "linux, phandle" propertyBin Meng
"linux,phandle" property is optional. Remove all instances in the sifive_u, virt and spike machine device trees. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: hw: Remove duplicated "hw/hw.h" inclusionBin Meng
Commit a27bd6c779ba ("Include hw/qdev-properties.h less") wrongly added "hw/hw.h" to sifive_prci.c and sifive_test.c. Another inclusion of "hw/hw.h" was later added via commit 650d103d3ea9 ("Include hw/hw.h exactly where needed"), that resulted in duplicated inclusion of "hw/hw.h". Fixes: a27bd6c779ba ("Include hw/qdev-properties.h less") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_test: Add reset functionalityBin Meng
This adds a reset opcode for sifive_test device to trigger a system reset for testing purpose. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: Resolve full path of the given bios imageBin Meng
At present when "-bios image" is supplied, we just use the straight path without searching for the configured data directories. Like "-bios default", we add the same logic so that "-L" actually works. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: Add a helper routine for finding firmwareBin Meng
This adds a helper routine for finding firmware. It is currently used only for "-bios default" case. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: plic: Remove unused interrupt functionsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Jonathan Behrens <fintelia@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Chih-Min Chao <chihmin.chao@sifive.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Fix clock-names property for ethernet nodeGuenter Roeck
The correct property name is clock-names, not clocks-names. Without this patch, the Ethernet driver fails to instantiate with the following error. macb 100900fc.ethernet: failed to get macb_clk (-2) macb: probe of 100900fc.ethernet failed with error -2 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sivive_u: Add dummy serial clock and aliases entry for uartGuenter Roeck
The riscv uart needs valid clocks. This requires a refereence to the clock node. Since the SOC clock is not emulated by qemu, add a reference to a fixed clock instead. The clock-frequency entry in the uart node does not seem to be necessary, so drop it. In addition to a reference to the clock, the driver also needs an aliases entry for the serial node. Add it as well. Without this patch, the serial driver fails to instantiate with the following error message. sifive-serial 10013000.uart: unable to find controller clock sifive-serial: probe of 10013000.uart failed with error -2 when trying to boot Linux. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-09-17riscv: sifive_u: Add support for loading initrdGuenter Roeck
Add support for loading initrd with "-initrd <filename>" to the sifive_u machine. This lets us boot into Linux without disk drive. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-08-16Include sysemu/sysemu.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/boards.h a bit lessMarkus Armbruster
hw/boards.h pulls in almost 60 headers. The less we include it into headers, the better. As a first step, drop superfluous inclusions, and downgrade some more to what's actually needed. Gets rid of just one inclusion into a header. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-26riscv/boot: Fixup the RISC-V firmware warningAlistair Francis
Fix a typo in the warning message displayed to users, don't print the message when running inside qtest and don't mention a specific QEMU version for the deprecation. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-18hw/riscv: Load OpenSBI as the default firmwareAlistair Francis
If the user hasn't specified a firmware to load (with -bios) or specified no bios (with -bios none) then load OpenSBI by default. This allows users to boot a RISC-V kernel with just -kernel. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-07-05hw/riscv: Replace global smp variables with machine smp propertiesLike Xu
The global smp variables in riscv are replaced with smp machine properties. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20190518205428.90532-6-like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> [ehabkost: fix spike_board_init()] [ehabkost: fix riscv_sifive_e_soc_init()] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-27hw/riscv: Extend the kernel loading supportAlistair Francis
Extend the RISC-V kernel loader to support Image and uImage files. A Linux kernel can now be booted with: qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel Image Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27hw/riscv: Add support for loading a firmwareAlistair Francis
Add support for loading a firmware file for the virt machine and the SiFive U. This can be run with the following command: qemu-system-riscv64 -machine virt -bios fw_jump.bin -kernel vmlinux Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27hw/riscv: Split out the boot functionsAlistair Francis
Split the common RISC-V boot functions into a seperate file. This allows us to share the common code. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27riscv: sifive_u: Update the plic hart config to support multicoreBin Meng
At present the PLIC is instantiated to support only one hart, while the machine allows at most 4 harts to be created. When more than 1 hart is configured, PLIC needs to instantiated to support multicore, otherwise an SMP OS does not work. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-06-27riscv: sifive_u: Do not create hard-coded phandles in DTBin Meng
At present the cpu, plic and ethclk nodes' phandles are hard-coded to 1/2/3 in DT. If we configure more than 1 cpu for the machine, all cpu nodes' phandles conflict with each other as they are all 1. Fix it by removing the hardcode. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 02:07:09 +0000