summaryrefslogtreecommitdiff
path: root/hw/pci
AgeCommit message (Collapse)Author
2019-01-14msix: make pba size math more uniformDongli Zhang
In msix_exclusive_bar the bar_pba_size is more than what the pba is expected to have, although this never affects the bar size. Specifically, the math in msix_init_exclusive_bar allocates too much memory in some cases. For example consider nentries = 8. msix_exclusive_bar will give us bar_pba_size = 16. So 16 bytes. However 8 bytes would be enough - this is all that the spec requires. So in practice bar_pba_size sometimes allocates an extra 8 bytes but never more. Since each MSIX entry size is 16 bytes, and since we make sure that table+pba is a power of two, this always leaves a multiple of 16 bytes for the PBA, so extra 8 bytes have no effect. However, its ugly to have pba size temporary variable have an incorrect value. For consistency switch to the formula used in msix_init. Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14pci/pcie: stop plug/unplug if the slot is lockedDavid Hildenbrand
We better stop right away. For now, errors would be partially ignored (so the guest might get informed or the device might get unplugged), although actual plug/unplug will be reported as failed to the user. While at it, properly move the check to the pre_plug handler for the plug case, as we can test the slot state before the device will be realized. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-09pci: allow cleanup/unregistration of PCI root busesMichael Roth
This adds cleanup counterparts to pci_register_root_bus(), pci_root_bus_new(), and pci_bus_irqs(). These cleanup routines are needed in the case of hotpluggable PCIHostBridge implementations. Currently we can rely on the object_unparent()'ing of the PCIHostState recursively unparenting and cleaning up it's child buses, but we need explicit calls to also: 1) remove the PCIHostState from pci_host_bridges global list. otherwise, we risk accessing freed memory when we access the list later 2) clean up memory allocated in pci_bus_irqs() Both are handled outside the context of any particular bus or host bridge's init/realize functions, making it difficult to avoid the need for explicit cleanup functions without remodeling how PCIHostBridges are created. So keep it simple and just add them for now. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-12-20pci: Adjust PCI config limit based on bus topologyAlex Williamson
A conventional PCI bus does not support config space accesses above the standard 256 byte configuration space. PCIe-to-PCI bridges are not permitted to forward transactions if the extended register address field is non-zero and must handle it as an unsupported request (PCIe bridge spec rev 1.0, 4.1.3, 4.1.4). Therefore, we should not support extended config space if there is a conventional bus anywhere on the path to a device. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: perform unplug via the hotplug handlerDavid Hildenbrand
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcie: perform unplug via the hotplug handlerDavid Hildenbrand
Introduce and use the "unplug" callback. This is a preparation for multi-stage hotplug handlers, whereby the bus hotplug handler is overwritten by the machine hotplug handler. This handler will then pass control to the bus hotplug handler. So to get this running cleanly, we also have to make sure to go via the hotplug handler chain when actually unplugging a device after an unplug request. Lookup the hotplug handler and call "unplug". Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/shpc: rename hotplug handler callbacksDavid Hildenbrand
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename shpc_device_hotplug_common() to shpc_device_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-20pci/pcie: rename hotplug handler callbacksDavid Hildenbrand
The callbacks are also called for cold plugged devices. Drop the "hot" to better match the actual callback names. While at it, also rename pcie_cap_slot_hotplug_common() to pcie_cap_slot_plug_common(). Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Fill PCIESlot link fields to support higher speeds and widthsAlex Williamson
Make use of the PCIESlot speed and width fields to update link information beyond those configured in pcie_cap_v1_fill(). This is only called for devices supporting a version 2 capability and automatically skips any non-PCIESlot devices. Only devices with increased link values generate any visible config space differences. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pci: Sync PCIe downstream port LNKSTA on readAlex Williamson
The PCIe link speed and width between a downstream device and its upstream port is negotiated on real hardware and susceptible to dynamic changes due to signal issues and power management. In the emulated device case there is no real hardware link, but we still might wish to have some consistency between endpoint and downstream port via a virtual negotiation. There is of course a real link for assigned devices and this same virtual negotiation allows the downstream port to match the endpoint, synchronizing on every read to support underlying physical hardware dynamically adjusting the link. This negotiation is intentionally unidirectional for compatibility. If the endpoint exceeds the capabilities of the downstream port or there is no endpoint device, the downstream port reports negotiation to its maximum speed and width, matching the previous case where negotiation was absent. De-tuning the endpoint to match a virtual link doesn't seem to benefit anyone and is a condition we've thus far reported without functional issues. Note that PCI_EXP_LNKSTA is already ignored for migration compatibility via pcie_cap_v1_fill(). Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: Create enums for link speed and widthAlex Williamson
In preparation for reporting higher virtual link speeds and widths, create enums and macros to help us manage them. Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Tested-by: Geoffrey McRae <geoff@hostfission.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19hw/pci-bridge: Fix invalid free()Matthias Weckbecker
When loadvm'ing a *running* snapshot qemu crashes due to an invalid free. It's fortunately caught early by glibc heap memory corruption protection and qemu gets killed with SIGABRT. Steps to reproduce: 1) Create VM (e.g w/ virsh define) 2) Start the VM and take a snapshot while it's running and having a PCI bridge attached 3) Destroy the VM and revert the running snapshot. This commit fixes the issue. Signed-off-by: Matthias Weckbecker <matthias@weckbecker.name> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-19pcie: set link state inactive/active after hot unplug/plugZheng Xiang
When VM boots from the latest version of linux kernel, after hot-unpluging virtio-blk disks which are hotplugged into pcie-root-port, the VM's dmesg log shows: [ 151.046242] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0001 from Slot Status [ 151.046365] pciehp 0000:00:05.0:pcie004: Slot(0-3): Attention button pressed [ 151.046369] pciehp 0000:00:05.0:pcie004: Slot(0-3): Powering off due to button press [ 151.046420] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 151.046425] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200 [ 151.046464] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 151.046468] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd c0 [ 156.163421] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 2f1 [ 156.163427] pciehp 0000:00:05.0:pcie004: pciehp_unconfigure_device: domain:bus:dev = 0000:06:00 [ 156.198736] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 156.198772] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400 [ 157.224124] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0018 from Slot Status [ 157.224194] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300 [ 157.224220] pciehp 0000:00:05.0:pcie004: pciehp_check_link_active: lnk_status = 2011 [ 157.224223] pciehp 0000:00:05.0:pcie004: Slot(0-3): Link Up [ 157.224233] pciehp 0000:00:05.0:pcie004: pciehp_get_power_status: SLOTCTRL a8 value read 7f1 [ 157.224281] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 157.224285] pciehp 0000:00:05.0:pcie004: pciehp_power_on_slot: SLOTCTRL a8 write cmd 0 [ 157.224300] pciehp 0000:00:05.0:pcie004: __pciehp_link_set: lnk_ctrl = 0 [ 157.224336] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 157.224339] pciehp 0000:00:05.0:pcie004: pciehp_green_led_blink: SLOTCTRL a8 write cmd 200 [ 159.739294] pci 0000:06:00.0 id reading try 50 times with interval 20 ms to get ffffffff [ 159.739315] pciehp 0000:00:05.0:pcie004: pciehp_check_link_status: lnk_status = 2011 [ 159.739318] pciehp 0000:00:05.0:pcie004: Failed to check link status [ 159.739371] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 159.739394] pciehp 0000:00:05.0:pcie004: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400 [ 160.771426] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 160.771452] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300 [ 160.771495] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 160.771499] pciehp 0000:00:05.0:pcie004: pciehp_set_attention_status: SLOTCTRL a8 write cmd 40 [ 160.771535] pciehp 0000:00:05.0:pcie004: pending interrupts 0x0010 from Slot Status [ 160.771539] pciehp 0000:00:05.0:pcie004: pciehp_green_led_off: SLOTCTRL a8 write cmd 300 After analyzing the log information, it seems that qemu doesn't change the Link Status from active to inactive after hot-unplug. This results in the abnormal log after the linux kernel commit d331710ea78fea merged. Furthermore, If I hotplug the same virtio-blk disk after hot-unplug, the virtio-blk would turn on and then back off. So this patch set the Link Status inactive after hot-unplug and active after hot-plug. Signed-off-by: Zheng Xiang <zhengxiang9@huawei.com> Signed-off-by: Zheng Xiang <xiang.zheng@linaro.org> Cc: Wang Haibin <wanghaibin.wang@huawei.com> Cc: qemu-stable@nongnu.org Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-14hw/pci/pci.c: Don't use load_image()Peter Maydell
The load_image() function is deprecated, as it does not let the caller specify how large the buffer to read the file into is. Instead use load_image_size(). While we are converting this code, add an error-check for read failure. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20181130151712.2312-5-peter.maydell@linaro.org
2018-11-27vmstate: constify VMStateFieldMarc-André Lureau
Because they are supposed to remain const. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181114132931.22624-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-05pci_bridge: fix typo in commentMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-10-11qmp, hmp: make subsystem/system-vendor identities optionalDenis V. Lunev
According to PCI specification, subsystem id and subsystem vendor id are present only in type 0 and type 2 headers (at different offsets), but not in type 1 headers. Thus we should make this data optional in struct PciDeviceId and skip reporting them via HMP if the information is not available. Additional (wrong information) about PCI bridges (Type1 devices) has been added in 5383a705 and fortunately not released. This patch fixes that problem. The problem was spotted by Markus. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20181002135538.12113-1-den@openvz.org> Reported-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-25qmp, hmp: add PCI subsystem id and vendor id to PCI infoDenis V. Lunev
This is a long story. Red Hat has relicensed Windows KVM device drivers in 2018 and there was an agreement that to avoid WHQL driver conflict software manufacturers should set proper PCI subsystem vendor ID in their distributions. Thus PCI subsystem vendor id becomes actively used. The problem is that this field is applied by us via hardware compats. Thus technically it could be lost. This patch adds PCI susbsystem id and vendor id to exportable parameters for validation. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Message-Id: <20180918095852.28422-1-den@openvz.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-09-07hw/pci: factor PCI reserve resources to a separate structureJing Liu
Factor "bus_reserve", "io_reserve", "mem_reserve", "pref32_reserve" and "pref64_reserve" fields of the "GenPCIERootPort" structure out to "PCIResReserve" structure, so that other PCI bridges can reuse it to add resource reserve capability. Signed-off-by: Jing Liu <jing2.liu@linux.intel.com> Reviewed-by: Marcel Apfelbaum<marcel.apfelbaum@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20hw/pci: remove obsolete PCIDevice->init()Philippe Mathieu-Daudé
All PCI devices are now QOM'ified. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-12net: allow using any PCI NICs in -net or -nicPaolo Bonzini
Remove the hard-coded list of PCI NIC names; instead, fill an array using all PCI devices listed under DEVICE_CATEGORY_NETWORK. Keep the old shortcut "virtio" for virtio-net-pci. Suggested-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13hw/pci-bridge: fix pcie root port's IO hints capabilityMarcel Apfelbaum
The gen_pcie_root_port mem-reserve and pref32-reserve properties are defined as size (so uint64_t), but passed as uint32_t when building the 'IO hints' vendor specific capability. Passing 4G (or more) gets truncated and passed as a zero reservation. Is not a huge issue since the guest firmware will always compare the hints with the default value and take the maximum. Fix it by passing the values as uint64_t and failing to init the gen_pcie_root_port id invalid values are used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-09Drop superfluous includes of qapi/qmp/qjson.hMarkus Armbruster
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-19-armbru@redhat.com>
2018-02-09Include qapi/qmp/qdict.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/qmp/qdict.h drop from 4550 (out of 4743) to 368 in my "build everything" tree. For qapi/qmp/qobject.h, the number drops from 4552 to 390. While there, separate #include from file comment with a blank line. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-13-armbru@redhat.com>
2018-02-09Eliminate qapi/qmp/types.hMarkus Armbruster
qapi/qmp/types.h is a convenience header to include a number of qapi/qmp/ headers. Since we rarely need all of the headers qapi/qmp/types.h includes, we bypass it most of the time. Most of the places that use it don't need all the headers, either. Include the necessary headers directly, and drop qapi/qmp/types.h. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-9-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-06hw/pci*: Replace fprintf(stderr, "*\n" with error_report()Alistair Francis
Replace a large number of the fprintf(stderr, "*\n" calls with error_report(). The functions were renamed with these commands and then compiler issues where manually fixed. find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + find ./* -type f -exec sed -i \ 'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \ {} + Some lines where then manually tweaked to pass checkpatch. A trailing '.' was removed in hw/pci/pci.c Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Conversions that aren't followed by exit() dropped, because they might be inappropriate. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180203084315.20497-9-armbru@redhat.com>
2018-01-18pci/shpc: Move function to generic header fileYuval Shaia
This function should be declared in generic header file so we can utilize it. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-05pci: Eliminate pci_find_primary_bus()David Gibson
pci_find_primary_bus() only has one user, in pc_xen_hvm_init(). That's inside the machine construction code, so it already has easy access to the machine's primary PCI bus. Get it directly, and thereby remove pci_find_primary_bus(). This removes one of only a handful of users of the ugly pci_host_bridges global. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Add pci_dev_bus_num() helperDavid Gibson
A fair proportion of the users of pci_bus_num() want to get the bus number on a specific device, so first have to look up the bus from the device then call it. This adds a helper to do that (since we're going to make looking up the bus slightly more verbose). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Rename root bus initialization functions for clarityDavid Gibson
pci_bus_init(), pci_bus_new_inplace(), pci_bus_new() and pci_register_bus() are misleadingly named. They're not used for initializing *any* PCI bus, but only for a root PCI bus. Non-root buses - i.e. ones under a logical PCI to PCI bridge - are instead created with a direct qbus_create_inplace() (see pci_bridge_initfn()). This patch renames the functions to make it clear they're only used for a root bus. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-11-16pci: Initialize pci_dev->name before useAlexey Kardashevskiy
This moves pci_dev->name initialization earlier so pci_dev->bus_master_as could get a name instead of an empty string. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Validate interfaces on base_class_initEduardo Habkost
Make sure we don't forget to add the Conventional PCI or PCI Express interface names on PCI device classes in the future. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Revieed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: conventional-pci-device and pci-express-device interfacesEduardo Habkost
Those two interfaces will be used to indicate which device types support Conventional PCI or PCI Express buses. Management software will be able to use the qom-list-types QMP command to query that information. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15PCI: PCIe access should always be little endianMatt Redfearn
PCIe busses are always little endian, so set the endianness of the memory region to little endian rather than native such that operations work as expected on big endian targets. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: allow 32-bit PCI IO accesses to pass through the PCI bridgeMark Cave-Ayland
Whilst the underlying PCI bridge implementation supports 32-bit PCI IO accesses, unfortunately they are truncated at the legacy 64K limit. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-15net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt
This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-09-08pci: add reserved slot check to do_pci_register_device()Mark Cave-Ayland
Add a new slot_reserved_mask bitmask to PCIBus indicating whether or not each PCI slot on the bus is reserved. Ensure that it is initialised to zero to maintain the existing behaviour that all slots are available by default, and add the additional check with appropriate error reporting to do_pci_register_device(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08pci: move check for existing devfn into new pci_bus_devfn_available() helperMark Cave-Ayland
Also touch up the logic in do_pci_register_device() accordingly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-09-08hw/pci: introduce bridge-only vendor-specific capability to provide some ↵Aleksandr Bezzubikov
hints to firmware On PCI init PCI bridges may need some extra info about bus number, IO, memory and prefetchable memory to reserve. QEMU can provide this with a special vendor-specific PCI capability. Signed-off-by: Aleksandr Bezzubikov <zuban32s@gmail.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-31Merge remote-tracking branch 'remotes/elmarco/tags/tidy-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Thu 31 Aug 2017 11:29:33 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/tidy-pull-request: (29 commits) eepro100: replace g_malloc()+memcpy() with g_memdup() test-iov: replace g_malloc()+memcpy() with g_memdup() i386: replace g_malloc()+memcpy() with g_memdup() i386: introduce ELF_NOTE_SIZE macro decnumber: use DIV_ROUND_UP kvm: use DIV_ROUND_UP i386/dump: use DIV_ROUND_UP ppc: use DIV_ROUND_UP msix: use DIV_ROUND_UP usb-hub: use DIV_ROUND_UP q35: use DIV_ROUND_UP piix: use DIV_ROUND_UP virtio-serial: use DIV_ROUND_UP console: use DIV_ROUND_UP monitor: use DIV_ROUND_UP virtio-gpu: use DIV_ROUND_UP vga: use DIV_ROUND_UP ui: use DIV_ROUND_UP vnc: use DIV_ROUND_UP vvfat: use DIV_ROUND_UP ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-31msix: use DIV_ROUND_UPMarc-André Lureau
I used the clang-tidy qemu-round check to generate the fix: https://github.com/elmarco/clang-tools-extra Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2017-08-30kvm: remove hard dependency on pciCornelia Huck
The msi routing code in kvm calls some pci functions: provide some stubs to enable builds without pci. Also, to make this more obvious, guard them via a pci_available boolean (which also can be reused in other places). Fixes: e1d4fb2de ("kvm-irqchip: x86: add msi route notify fn") Fixes: 767a554a0 ("kvm-all: Pass requester ID to MSI routing functions") Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-08-01trace-events: fix code style: %# -> 0x%Vladimir Sementsov-Ogievskiy
In trace format '#' flag of printf is forbidden. Fix it to '0x%'. This patch is created by the following: check that we have a problem > find . -name trace-events | xargs grep '%#' | wc -l 56 check that there are no cases with additional printf flags before '#' > find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l 0 check that there are no wrong usage of '#' and '0x' together > find . -name trace-events | xargs grep '0x%#' | wc -l 0 fix the problem > find . -name trace-events | xargs sed -i 's/%#/0x%/g' [Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep "%[-+ 0'I]+#" instead so the shell quoting is correct. --Stefan] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 11:56:46 +0000