| Age | Commit message (Collapse) | Author |
|---|
|
The monitor command for hotplugging is in i386 specific code. This is just
plain wrong, as S390 just learned how to do hotplugging too and needs to
get drives for that.
So let's add a generic copy to generic code that handles drive_add in a
way that doesn't have pci dependencies. All pci specific code can then
be handled in a pci specific function.
Signed-off-by: Alexander Graf <agraf@suse.de>
---
v1 -> v2:
- align generic drive_add to pci specific one
- rework to split between generic and pci code
v2 -> v3:
- remove comment
|
|
USB mass storage devices are registered twice in the boot order.
To avoid having to keep the two paths in sync, pass the bootindex
property down to the scsi-disk device and let it register itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
(slot, fn) pair is somewhat confusing because of ARI.
So use devfn for pci_find_device() instead of (slot, fn).
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The host part of a block device can be deleted with in progress
block migration.
To fix this, add a reference count to DriveInfo, freeing resources
on last reference.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
drive_init() picks the first free bus and unit number, unless the user
specifies them.
This isn't a good fit for the drive_add monitor command, because there
we specify the controller by PCI address instead of using bus number
set by drive_init().
scsi_hot_add() takes care to replace the unit number set by
drive_init() by the real one, but it neglects to replace the bus
number. Thus, bus/unit in DriveInfo may be bogus. Affects
drive_get() and drive_get_max_bus(). I'm not aware of anything bad
happening because of that; looks like by the time we're hot-plugging,
the two functions aren't used anymore. Fix it anyway.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
scsi-disk devices may wish to override the removable bit. Add support
for a qdev property on SCSI devices. This is will be used by usb-msd.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Changing block.h or blockdev.h resulted in recompiling most objects.
Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Switch tree to lookup-by-name using qemu_find_opts().
Also hook up virtfs options so qemu_find_opts works for them too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
For instance, -device scsi-disk,drive=foo -device scsi-disk,drive=foo
happily creates two SCSI disks connected to the same block device.
It's all downhill from there.
Device usb-storage deliberately attaches twice to the same blockdev,
which fails with the fix in place. Detach before the second attach
there.
Also catch attempt to delete while a guest device model is attached.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Make the property point to BlockDriverState, cutting out the DriveInfo
middleman. This prepares the ground for block devices that don't have
a DriveInfo.
Currently all user-defined ones have a DriveInfo, because the only way
to define one is -drive & friends (they go through drive_init()).
DriveInfo is closely tied to -drive, and like -drive, it mixes
information about host and guest part of the block device. I'm
working towards a new way to define block devices, with clean
host/guest separation, and I need to get DriveInfo out of the way for
that.
Fortunately, the device models are perfectly happy with
BlockDriverState, except for two places: ide_drive_initfn() and
scsi_disk_initfn() need to check the DriveInfo for a serial number set
with legacy -drive serial=... Use drive_get_by_blockdev() there.
Device model code should now use DriveInfo only when explicitly
dealing with drives defined the old way, i.e. without -device.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
None of its callers checks for failure. scsi_hot_add() can crash
because of that:
(qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1
scsi-generic: scsi generic interface too old
Segmentation fault (core dumped)
Fix all callers, not just scsi_hot_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Anything that moves hundreds of lines out of vl.c can't be all bad.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
add helper function which converts root bus to pci domain.
make them aware of pci domain.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We don't want pci_del in QMP. Use device_del instead.
This reverts commit 6848d827162fea039f2658414a4adb6164a4f9b0.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Short story: We don't want pci_add in QMP. Long story follows.
pci_add can do two things:
* Hot plug a PCI NIC. device_add is more general.
* Hot plug a PCI disk controller, and a drive connected to it.
The controller is either virtio-blk-pci (if=virtio) or lsi53c895a
(if=scsi). With the latter, the drive is optional. Use drive_add to
hotplug additional SCSI drives. Except drive_add is not available in
QMP.
device_add is more general for controllers and the guest part of
drives. I'm working on a more general alternative for the host part
of drives.
Why am I proposing to remove pci_add from QMP before its replacement is
ready? I want it out sooner rather than later, because it isn't fully
functional (errors and drive_add are missing), and we do not plan to
complete the job. In other words, it's not really usable over QMP now,
and it's not what we want for QMP anyway. Since we don't want it to be
used over QMP, we should take it out, not leave it around as a trap for
the uninitiated.
Dan Berrange confirmed that libvirt has no need for pci_add & friends
over QMP.
This reverts commit 7a344f7ac7bb651d0556a933ed8060d3a9e5d949.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Value stored is never read.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Both functions report errors nicely enough now, no need for additional
messages.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
We sometimes permit omitting the first option name, for example
-device foo is short for -device driver=foo. The name to use
("driver" in the example) is passed as argument to qemu_opts_parse().
For each QemuOptsList, we use at most one such name.
Move the name into QemuOptsList, and pass whether to permit the
abbreviation. This ensures continued consistency, and simplifies the
commit after next in this series.
|
|
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
|
|
Commit 30d335d6 converted an informational message from
monitor_printf() to qemu_error(), probably because the latter doesn't
need a mon argument. A later commit will make qemu_error() print
additional stuff that is only appropriate for proper errors, and then
this will break. Clean it up.
|
|
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
It's not needed to check the return of qobject_from_jsonf()
anymore, as an assert() has been added there.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
SCSI controllers have no trouble existing without any attached
disks. This could be achieved with the (legacy) monitor syntax
pci_add pci_addr=auto storage if=scsi
This is now denied with
scsi requires a backing file/device.
failed to add if=scsi
There is no need for this denial and it breaks compatability
with existing QEMU usage, so remove the check for presence
of a drive.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Return a QDict with information about the just added device.
This commit should not change user output.
Please, note that this patch does not do error handling
conversion. In error conditions the handler still calls
monitor_printf().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch fills the DriveInfo->unit after hotplugging a scsi disk.
It makes a difference when auto-assigning a scsi id, where unit was
left filled with '-1' instead of the actual scsi id.
With this patch applied the the drive naming logic in drive_init() works
as good as it did in previous releases. Which means it works fine with
a single scsi bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The PCI bus on x86 requires ACPI for hotplug support, thus disbling ACPI
also disables hotplug for the PCI bus. This patch makes qemu check
whenever the PCI bus in question can handle hotplug before trying to add
devices. This is needed because qdev will abort() on any attempt to
hotplug devices into a non-hotpluggable bus.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch renames pci_find_host_bus() to pci_find_root_bus()
as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch sorts out/enhances pci code to track pci bus topology
more accurately.
- Track host bus bridge with pci domain number. Although the
current qemu implementation supports only pci domian 0 yet.
- Track pci bridge parent-child relationship.
When looking down from pci host bus for pci sub bus, be aware of
secondary bus/subordinate bus.
Thus pci configuration transaction is more accurately emulated.
This patch adds new member to PCIBus to track pci bus topology.
Since qdev already tracks down bus relationship, those new member
wouldn't be necessary.
However it would be addressed later because not all the pci device
isn't converted to qdev yet.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Errors are still directly printed, as we are only converting
regular output.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Changes:
- create common scsi_hot_add function for adding a scsi disk to
a adapter.
- Add sanity checks. You can't drive_add disks to the VGA any more.
- Ignore the unit value calculated by drive_init, add a comment
explaining why. Review the patch to find the details ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Explicitly add the drive to the bus of the newly created scsi adapter
instead of hoping that scsi_bus_legacy_handle_cmdline() picks it up
correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Cleanup on unplug happens via qdev->exit() callback now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Same as for -net except for:
- only tap, user, vde and socket types are supported
- the vlan parameter is not allowed
- the name parameter is not allowed but the id parameter is
required
Patchworks-ID: 35517
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Patchworks-ID: 35378
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
But do so only where it may actually fail. Leave the rest for the
next commit.
Patchworks-ID: 35167
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Now that net_client_init() has no users, kill it off and rename
net_client_init_from_opts().
There is no further need for the old code in net_client_parse() either.
We use qemu_opts_parse() 'firstname' facitity for that. Instead, move
the special handling of the 'vmchannel' type there.
Simplify the vl.c code into merely call net_client_parse() for each
-net command line option and then calling net_init_clients() later
to iterate over the options and create the clients.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This reverts commit 0148fde54c2478ea8a47c8dbfe4c0fb8bda4d996.
As requested by Luiz.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
It's qdev_create() specialized for PCI, so name it accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Monitor command "pci_add ADDR storage ..." does its work in
qemu_pci_hot_add_nic(). It called pci_create(..., ADDR) to create the
device. That's wrong, because pci_create() terminates the program
when ADDR is invalid.
Use pci_get_bus_devfn() and pci_create_noinit() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Allow adding unconnected host drives by specifying if=none like it is
possible with -drive. They can be put in use with drive attributes,
like this:
drive_add dummy if=none,id=mydisk,file=/some/disk.img
device_add virtio-blk-pci,drive=mydisk
which is the monitor aequivalent to these command line switches:
-drive if=none,id=mydisk,file=/some/disk.img
-device virtio-blk-pci,drive=mydisk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
move pci device lookup into the "case IF_SCSI" section, so we
can do something else for other interface types.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Changes:
* drive_uninit() wants a DriveInfo now.
* drive_uninit() also calls bdrv_delete(),
so callers don't need to do that.
* drive_uninit() calls are moved over to the ->exit()
callbacks, destroy_bdrvs() is zapped.
* setting bdrv->private is not needed any more as the
only user (destroy_bdrvs) is gone.
* usb-storage needs no drive_uninit, scsi-disk will
handle that.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Switch over acpi-based PCI hotplug for pc over to the new
qdev-based pci hotplugging.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
pci_unregister_device is static now and hooked into Devicestate->exit.
qdev_free(pci_device) works now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
If the user issues one of the following commands to the Monitor:
pci_add pci_addr=auto nic model=None
pci_add pci_addr=auto nic model=?
QEMU will exit, because the function used to perform sanity
checks (qemu_check_nic_model_list()) exits on error.
This function is used by the startup code, where it makes
sense to exit on error, but in the Monitor it doesn't.
Changing qemu_check_nic_model_list() to not exit on error
is not possible though, as it's used by the board init
code (the PC one), where all board specific code must have
void return.
The way I've chosen to fix this was to introduce a new function
called pci_nic_supported(), which checks if the NIC is supported
and returns true or false accordingly.
The new function is used only by the Monitor, it performs the
necessary check and returns an error in case the NIC is not
supported, thus qemu_check_nic_model_list()'s exit is never trigged.
The following should be observed:
1. Only the specified NIC is checked, the default one is assumed
to be supported
2. The NIC query command (model=?) won't work with pci_add, the
right way to do this with the Monitor is to add a new command
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896,
f40d753718c72693c5f520f0d9899f6e50395e94,
96555a96d724016e13190b28cffa3bc929ac60dc and
3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
