summaryrefslogtreecommitdiff
path: root/hw/net/trace-events
AgeCommit message (Collapse)Author
2021-07-02dp8393x: convert to trace-eventsMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Finn Thain <fthain@linux-m68k.org> Message-Id: <20210625065401.30170-3-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-06-02docs: fix references to docs/devel/tracing.rstStefano Garzarella
Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-28Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Thu 27 May 2021 04:06:17 BST # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: tap-bsd: Remove special casing for older OpenBSD releases virtio-net: failover: add missing remove_migration_state_change_notifier() hw/net/imx_fec: return 0xffff when accessing non-existing PHY Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-27hw/net/imx_fec: return 0xffff when accessing non-existing PHYGuenter Roeck
If a PHY does not exist, attempts to read from it should return 0xffff. Otherwise the Linux kernel will believe that a PHY is there and select the non-existing PHY. This in turn will result in network errors later on since the real PHY is not selected or configured. Since reading from or writing to a non-existing PHY is not an emulation error, replace guest error messages with traces. Fixes: 461c51ad4275 ("Add a phy-num property to the i.MX FEC emulator") Cc: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jason Wang <jasowang@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-03-05hw/net: Add npcm7xx emc modelDoug Evans
This is a 10/100 ethernet device that has several features. Only the ones needed by the Linux driver have been implemented. See npcm7xx_emc.c for a list of unimplemented features. Reviewed-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Avi Fishman <avi.fishman@nuvoton.com> Signed-off-by: Doug Evans <dje@google.com> Message-id: 20210218212453.831406-2-dje@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-03Add a phy-num property to the i.MX FEC emulatorJean-Christophe Dubois
We need a solution to use an Ethernet PHY that is not the first device on the MDIO bus (device 0 on MDIO bus). As an example with the i.MX6UL the NXP SOC has 2 Ethernet devices but only one MDIO bus on which the 2 related PHY are connected but at unique addresses. Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Message-id: a1a5c0e139d1c763194b8020573dcb6025daeefa.1593296112.git.jcd@tribudubois.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-06-18virtio-net: implement RSS configuration commandYuri Benditovich
Optionally report RSS feature. Handle RSS configuration command and keep RSS parameters in virtio-net device context. Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-06-16hw/net/imx_fec: Convert debug fprintf() to trace eventsJean-Christophe Dubois
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> [PMD: Fixed 32-bit format string using PRIx32/PRIx64] Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12hw/arm/allwinner-h3: add EMAC ethernet deviceNiek Linnenbank
The Allwinner Sun8i System on Chip family includes an Ethernet MAC (EMAC) which provides 10M/100M/1000M Ethernet connectivity. This commit adds support for the Allwinner EMAC from the Sun8i family (H2+, H3, A33, etc), including emulation for the following functionality: * DMA transfers * MII interface * Transmit CRC calculation Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20200311221854.30370-10-nieklinnenbank@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-03NetRxPkt: Introduce support for additional hash typesYuri Benditovich
Add support for following hash types: IPV6 TCP with extension headers IPV4 UDP IPV6 UDP IPV6 UDP with extension headers Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com> Acked-by: Dmitry Fleytman <dmitry.fleytman@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-01-27hppa: Add support for LASI chip with i82596 NICHelge Deller
LASI is a built-in multi-I/O chip which supports serial, parallel, network (Intel i82596 Apricot), sound and other functionalities. LASI has been used in many HP PARISC machines. This patch adds the necessary parts to allow Linux and HP-UX to detect LASI and the network card. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191220211512.3289-3-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-10-29net: add tulip (dec21143) driverSven Schnelle
This adds the basic functionality to emulate a Tulip NIC. Implemented are: - RX and TX functionality - Perfect Frame Filtering - Big/Little Endian descriptor support - 93C46 EEPROM support - LXT970 PHY Not implemented, mostly because i had no OS using these functions: - Imperfect frame filtering - General Purpose Timer - Transmit automatic polling - Boot ROM support - SIA interface - Big/Little Endian data buffer conversion Successfully tested with the following Operating Systems: - MSDOS with Microsoft Network Client 3.0 and DEC ODI drivers - HPPA Linux - Windows XP - HP-UX Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20191022155413.4619-1-svens@stackframe.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02sunhme: ensure that RX descriptor ring overflow is indicated to client driverMark Cave-Ayland
On very busy networks connected via a tap interface, it is possible to overflow the RX descriptor ring in the time between the client driver enabling the RX MAC and finishing writing the final configuration to the NIC registers. Ensure that we detect this condition and update the status register accordingly to indicate an overflow has occurred (and the incoming packet dropped) in order to prevent the client driver becoming confused. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-07-02sunhme: add trace event for logging PCI IRQMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-03-22trace-events: Fix attribution of trace points to sourceMarkus Armbruster
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of cleanup-trace-events.pl. Same funnies as in the previous commit, of course. Manually shorten its change to linux-user/trace-events to */signal.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-6-armbru@redhat.com Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-05virtio-net: Allow qemu_announce_self to trigger virtio announcementsDr. David Alan Gilbert
Expose the virtio-net self announcement capability and allow qemu_announce_self() to call it. These announces are caused by something external (i.e. the announce-self command); they won't trigger if the migration counter is triggering announces at the same time. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-03-05virtio-net: Switch to using announce timerDr. David Alan Gilbert
Switch virtio's self announcement to use the AnnounceTimer. It keeps it's own AnnounceTimer (per device), and starts running it using a migration post-load and a virtual clock; that way the announce happens once the guest is actually running. The timer uses the migration parameters to set the timing of the repeats. Based on earlier patches by myself and Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-10-19e1000: indicate dropped packets in HW countersJason Wang
The e1000 emulation silently discards RX packets if there's insufficient space in the ring buffer. This leads to errors on higher-level protocols in the guest, with no indication about the error cause. This patch increments the "Missed Packets Count" (MPC) and "Receive No Buffers Count" (RNBC) HW counters in this case. As the emulation has no FIFO for buffering packets that can't immediately be pushed to the guest, these two registers are practically equivalent (see 10.2.7.4, 10.2.7.33 in https://www.intel.com/content/www/us/en/embedded/products/networking/82574l-gbe-controller-datasheet.html). On a Linux guest, the register content will be reflected in the "rx_missed_errors" and "rx_no_buffer_count" stats from "ethtool -S", and in the "missed" stat from "ip -s -s link show", giving at least some hint about the error cause inside the guest. If the cause is known, problems like this can often be avoided easily, by increasing the number of RX descriptors in the guest e1000 driver (e.g under Linux, "e1000.RxDescriptors=1024"). The patch also adds a qemu trace message for this condition. Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2018-09-25hw/net/pcnet-pci: Unify pcnet_ioport_read/write and pcnet_mmio_read/writePeter Maydell
The only difference between our implementation of the pcnet ioport accessors and the mmio accessors is that the former check BCR_DWIO to see what access widths are permitted for addresses in the aprom range (0x0..0xf). In fact our failure to do this in the mmio accessors is a bug (one which was fixed for the ioport accessors in commit 7ba79741970 in 2011). The data sheet for the Am79C970A does not describe the DWIO bit as only applying for I/O space mapped I/O resources and not memory mapped I/O resources, and our MMIO accessors already honour DWIO for accesses in the 0x10..0x1f range (since the pcnet_ioport_{read,write}{w,l} functions check it). The data sheet for the later but compatible Am79C976 is clearer: it states specifically "DWIO mode applies to both I/O- and memory-mapped acceses." This seems to be reasonable evidence in favour of interpretating the Am79C970A spec as being the same. (NB: Linux's pcnet driver only supports I/O accesses, so the MMIO access part of this device is probably untested anyway.) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25hw/net/pcnet-pci: Convert away from old_mmio accessorsPeter Maydell
Convert the pcnet-pci device away from using the old_mmio MemoryRegionOps accessor functions. This commit is a no-behaviour-change API conversion. (Since PCNET_PNPMMIO_SIZE is 0x20, the old "addr & 0x10" check and the new "addr < 0x10" check are exact opposites; the new code is phrased to be parallel with the pcnet_io_read/write functions.) I have left a TODO comment marker because the similarity between the MMIO and IO accessor behaviour is suspicious and they could be combined, but this will be left to a different patch. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-29hw/net/etraxfs_eth: Convert printf() calls to trace eventsPhilippe Mathieu-Daudé
Suggested-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-29hw/net/ne2000: Convert printf() calls to trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-29hw/net/ne2000: Add trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-09-21net: add Sun HME (Happy Meal Ethernet) on-board NICMark Cave-Ayland
Enable it by default for the sparc64-softmmu configuration. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
2017-09-15net: Add SunGEM device emulation as found on Apple UniNorthBenjamin Herrenschmidt
This adds a simplistic emulation of the Sun GEM ethernet controller found in Apple ASICs. Currently we only support the Apple UniNorth 1.x variant, but the other Apple or Sun variants should mostly be a matter of adding PCI IDs options. We have a very primitive emulation of a single Broadcom 5201 PHY which is supported by the MacOS driver. This model brings out-of-the-box networking to MacOS 9, and all versions of OS X I tried with the mac99 platform. Further improvements from Mark: - Remove sungem.h file, moving constants into sungem.c as required - Switch to using tracepoints for debugging - Split register blocks into separate memory regions - Use arrays in SunGEMState to hold register values - Add state-saving support Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-08-01trace-events: fix code style: print 0x before hex numbersVladimir Sementsov-Ogievskiy
The only exception are groups of numers separated by symbols '.', ' ', ':', '/', like 'ab.09.7d'. This patch is made by the following: > find . -name trace-events | xargs python script.py where script.py is the following python script: ========================= #!/usr/bin/env python import sys import re import fileinput rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)' rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')') rbad = re.compile('(?<!0x)' + rhex) files = sys.argv[1:] for fname in files: for line in fileinput.input(fname, inplace=True): arr = re.split(rgroup, line) for i in range(0, len(arr), 2): arr[i] = re.sub(rbad, '0x\g<0>', arr[i]) sys.stdout.write(''.join(arr)) ========================= Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01trace-events: fix code style: %# -> 0x%Vladimir Sementsov-Ogievskiy
In trace format '#' flag of printf is forbidden. Fix it to '0x%'. This patch is created by the following: check that we have a problem > find . -name trace-events | xargs grep '%#' | wc -l 56 check that there are no cases with additional printf flags before '#' > find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l 0 check that there are no wrong usage of '#' and '0x' together > find . -name trace-events | xargs grep '0x%#' | wc -l 0 fix the problem > find . -name trace-events | xargs sed -i 's/%#/0x%/g' [Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep "%[-+ 0'I]+#" instead so the shell quoting is correct. --Stefan] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-07-31docs: fix broken paths to docs/devel/tracing.txtPhilippe Mathieu-Daudé
With the move of some docs/ to docs/devel/ on ac06724a71, no references were updated. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-31trace: clean up trace-events filesStefan Hajnoczi
There are a number of unused trace events that scripts/cleanup-trace-events.pl finds. The "hw/vfio/pci-quirks.c" filename was typoed and "qapi/qapi-visit-core.c" was missing the qapi/ directory prefix. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20170126171613.1399-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-09-27e1000e: Fix CTRL_EXT.EIAME behaviorDmitry Fleytman
CTRL_EXT.EIAME bit controls clearing of IAM bits, but current code clears IMS bits instead. See spec. 10.2.2.5 Extended Device Control Register. Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-09-23spapr_llan: convert to trace framework instead of DPRINTFLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-08-12trace-events: fix first line comment in trace-eventsLaurent Vivier
Documentation is docs/tracing.txt instead of docs/trace-events.txt. find . -name trace-events -exec \ sed -i "s?See docs/trace-events.txt for syntax documentation.?See docs/tracing.txt for syntax documentation.?" \ {} \; Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-id: 1470669081-17860-1-git-send-email-lvivier@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20trace: split out trace events for hw/net/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/net/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-11-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 10:31:45 +0000