summaryrefslogtreecommitdiff
path: root/hw/isa
AgeCommit message (Collapse)Author
2016-06-29ich9: implement SCI_IRQ_SEL registerPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: implement ACPI_EN registerPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29isa: introduce wrapper isa_connect_gpio_outEfimov Vasily
Currently a direct access to the device structure field is used to connect ISA device IRQ to the bus. GPIO access should be used instead if possible. The patch adds wrapper isa_connect_gpio_out. The function connects specified output GPIO to specified ISA IRQ. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 LPC: move call of isa_bus_irqs to 'realize' methodEfimov Vasily
The isa_bus_irqs function initializes ISA bus IRQ array pointer with specified value. Previously the ICH9 LPC bridge model did not have its own IRQs but only IRQ pointer cache. And same GSI were used for ISA bus and other sources behind the bridge (PCI, SCI). Hence, the pc_q35_init was only possible place to setup both ISA bus IRQs and the bridge IRQ cache. As a result, the call of isa_bus_irqs was made from pc_q35_init. Now the ICH9 LPC bridge has its own output IRQs which are connected to GSI. The output IRQs are already used to route IRQs from PCI and SCI. The patch makes the ICH9 LPC bridge output IRQs to used for ISA bus too. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ICH9 LPC: handle GSI as qdev GPIOEfimov Vasily
The ICH9 LPC bridge has 24 output IRQs connected to GSI. Currently the IRQs are referenced by pointers. The pointers are initialized at startup by direct access to the structure fields. This violates Qemu device model. The patch makes the IRQs handling to use GPIO model. Signed-off-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: unify pic and ioapic IRQ vectorsPaolo Bonzini
ich9->pic and ich9->ioapic differ for the first 16 GSIs (because ich9->pic is wired to 8259+IOAPIC but ich9->ioapic is wired to IOAPIC only). However, ich9->ioapic is never used for the first 16 GSIs, so the two vectors can be merged. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: clean up ich9_lpc_update_pic/ich9_lpc_update_apic and callersPaolo Bonzini
Make ich9_lpc_update_pic take care only of GSIs 0-15, and ich9_lpc_update_apic take care only of GSIs 16-23. Assert that they are called with the correct GSI indices. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-29ich9: call ich9_lpc_update_pic for disabled pirqsPaolo Bonzini
An asserted pirq can be disabled and the corresponding GSIs should then go down to 0. However, because of the conditional in ich9_lpc_update_by_pirq, the legacy 8259 pin could remain stuck to 1. Reviewed-by: Efimov Vasily <real@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-20trace: split out trace events for hw/isa/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/isa/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-24-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-07ICH9: fix typoCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-06-07pc: use AcpiDeviceIfClass.send_event to issue GPE eventsIgor Mammedov
it reduces number of args passed in handlers by 1 and a number of used proxy wrappers saving ~20LOC. Also it allows to make cpu/mem hotplug code more universal as it would allow ARM to reuse it without rewrite by providing its own send_event callback to trigger events usiong GPIO instead of GPE as fixed hadrware ACPI model doen't have GPE at all. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07acpi: extend ACPI interface to provide send_event hookIgor Mammedov
send_event() hook will allow to send ACPI event in a target specific way (GPE or GPIO based impl.) it will also simplify proxy wrappers in piix4pm/ich9 that access ACPI regs and SCI which are part of piix4pm/lcp_ich9 devices and call acpi_foo() API directly. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-05-19explicitly include qom/cpu.hPaolo Bonzini
exec/cpu-all.h includes qom/cpu.h. Explicit inclusion will keep things working when cpu.h will not be included indirectly almost everywhere (either directly or through qemu-common.h). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22hw: explicitly include qemu-common.h and cpu.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-11ich9lpc: fix typoCao jin
change some "rbca" to "rcrb"(root complex register block) while the other to "rcba"(root complex base address). Bonus: add more comments and fix some indentation. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-25ich9: Remove enable_tco arguments from init functionsEduardo Habkost
The enable_tco arguments are always true, so they are not needed anymore. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-03isa: add an ISA DMA interface, and store it within the ISA busHervé Poussineau
This will permit to deprecate global DMA_*() functions. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1453843944-26833-11-git-send-email-hpoussin@reactos.org Signed-off-by: John Snow <jsnow@redhat.com>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2016-01-29x86: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
2016-01-29ppc: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-6-git-send-email-peter.maydell@linaro.org
2016-01-13isa: Clean up inappropriate hw_error()Markus Armbruster
isa_bus_irqs(), isa_create() and isa_try_create() call hw_error() when passed a null bus. Use of hw_error() has always been questionable, because these are used only during machine initialization, and printing CPU registers isn't useful there. Since the previous commit, passing a null bus is a programming error. Drop the hw_error() and simply let it crash. Cc: Richard Henderson <rth@twiddle.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-Id: <1450354795-31608-12-git-send-email-armbru@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-01-13isa: Clean up error handling around isa_bus_new()Markus Armbruster
We can have at most one ISA bus. If you try to create another one, isa_bus_new() complains to stderr and returns null. isa_bus_new() is called in two contexts, machine's init() and device's realize() methods. Since complaining to stderr is not proper in the latter context, convert isa_bus_new() to Error. Machine's init(): * mips_jazz_init(), called from the init() methods of machines "magnum" and "pica" * mips_r4k_init(), the init() method of machine "mips" * pc_init1() called from the init() methods of non-q35 PC machines * typhoon_init(), called from clipper_init(), the init() method of machine "clipper" These callers always create the first ISA bus, hence isa_bus_new() can't fail. Simply pass &error_abort. Device's realize(): * i82378_realize(), of PCI device "i82378" * ich9_lpc_realize(), of PCI device "ICH9-LPC" * pci_ebus_realize(), of PCI device "ebus" * piix3_realize(), of PCI device "pci-piix3", abstract parent of "PIIX3" and "PIIX3-xen" * piix4_realize(), of PCI device "PIIX4" * vt82c686b_realize(), of PCI device "VT82C686B" Propagate the error. Note that these devices are typically created only by machine init() methods with qdev_init_nofail() or similar. If we screwed up and created an ISA bus before that call, we now give up right away. Before, we'd hobble on, and typically die in isa_bus_irqs(). Similar if someone finds a way to hot-plug one of these critters. Cc: Richard Henderson <rth@twiddle.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: "Hervé Poussineau" <hpoussin@reactos.org> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1450370121-5768-11-git-send-email-armbru@redhat.com>
2016-01-13isa: Trivially convert remaining PCI-ISA bridges to realize()Markus Armbruster
These are "ICH9-LPC" and "ebus". Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1450370121-5768-10-git-send-email-armbru@redhat.com>
2016-01-13hw: Inline the qdev_prop_set_drive_nofail() wrapperMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1449764955-10741-3-git-send-email-armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNTLaszlo Ersek
Commit 4d00636e97b7 ("ich9: Add the lpc chip", Nov 14 2012) added the ich9_apm_ctrl_changed() ioport write callback function such that it would inject the SMI, in response to a write to the APM_CNT register, on the first CPU, invariably. Since this register is used by guest code to trigger an SMI synchronously, the interrupt should be injected on the VCPU that is performing the write. apm_ioport_writeb() is the .write callback of the "apm_ops" MemoryRegionOps [hw/isa/apm.c]; it is parametrized to call ich9_apm_ctrl_changed() by ich9_lpc_init() [hw/isa/lpc_ich9.c], via apm_init(). Therefore this change affects no other board. ich9_generate_smi() is an unrelated function that is called by the TCO watchdog; a watchdog is likely in its right to (asynchronously) inject interrupts on the first CPU only. This patch allows the combined edk2/OVMF SMM driver stack to work with multiple VCPUs on TCG, using both qemu-system-i386 and qemu-system-x86_64. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Michael Kinney <michael.d.kinney@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-09i8257: remove cpu_request_exit irqPaolo Bonzini
This is unused. cpu_exit now is almost exclusively an internal function to the CPU execution loop. In a few patches, we'll change the remaining occurrences to qemu_cpu_kick, making it truly internal. Reviewed-by: Richard henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-08ich9: implement strap SPKR pin logicPaulo Alcantara
If the signal is sampled high, this indicates that the system is strapped to the "No Reboot" mode (ICH9 will disable the TCO Timer system reboot feature). The status of this strap is readable via the NO_REBOOT bit (CC: offset 0x3410:bit 5). The NO_REBOOT bit is set when SPKR pin on ICH9 is sampled high. This bit may be set or cleared by software if the strap is sampled low but may not override the strap when it indicates "No Reboot". This patch implements the logic where hardware has ability to set SPKR pin through a property named "noreboot" and it's sampled high by default. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07ich9: add TCO interface emulationPaulo Alcantara
This interface provides some registers within a 32-byte range and can be acessed through PCI-to-LPC bridge interface (PMBASE + 0x60). It's commonly used as a watchdog timer to detect system lockups through SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If NO_REBOOT bit is not set in GCS (General Control and Status register), the system will be resetted upon second timeout if TCO_RLD register wasn't previously written to prevent timeout. This patch adds support to TCO watchdog logic and few other features like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection, etc. are not implemented yet. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-06ich9: add smm_enabled field and argumentsPaolo Bonzini
Q35's ACPI device is hard-coding SMM availability to KVM. Place the logic where the board is created instead, so that it will be possible to override it. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06piix4/ich9: do not raise SMI on ACPI enable/disable commandsPaolo Bonzini
These commands are handled entirely by QEMU. Do not raise an SMI when they happen, because Windows (at least 2008r2) expects these commands to work and (depending on the value of APMC_EN at startup) the firmware might not have installed an SMI handler. When this happens (e.g. the kernel supports SMIs, or you are using TCG, but you have used "-machine smm=off") RIP is moved to 0x38000 where there is no code to execute. Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23vt82c686: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-23piix4: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-16Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20150615-1' into ↵Peter Maydell
staging virtio-gpu: pci support bits and virtio-vga. # gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150615-1: virtio-vga: add vgabios configuration virtio-vga: add '-vga virtio' support virtio-vga: add virtio gpu device with vga compatibility virtio-gpu-pci: add virtio pci support virtio-gpu: fix error message Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-12virtio-vga: add '-vga virtio' supportGerd Hoffmann
Some convinience fluff: Add support for '-vga virtio', also add virtio-vga to the list of vga cards so '-device virtio-vga' will turn off the default vga. Written by Dave Airlie and Gerd Hoffmann. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-05ich9: implement SMI_LOCKGerd Hoffmann
Add write mask for the smi enable register, so we can disable write access to certain bits. Open all bits on reset. Disable write access to GBL_SMI_EN when SMI_LOCK (in ich9 lpc pci config space) is set. Write access to SMI_LOCK itself is disabled too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05Move parallel_hds_isa_init to hw/isa/isa-bus.cMiroslav Rezanina
Disabling CONFIG_PARALLEL cause removing parallel_hds_isa_init defined in parallel.c. This function is called during initialization of some boards so disabling CONFIG_PARALLEL cause build failure. This patch moves parallel_hds_isa_init to hw/isa/isa-bus.c so it is included in case of disabled CONFIG_PARALLEL. Build is successful but qemu will abort with "Unknown device" error when function is called. Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com> Message-Id: <1431509970-32154-1-git-send-email-mrezanin@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-04Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, acpi, virtio, tpm This includes pxb support by Marcel, as well as multiple enhancements all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu Jun 4 11:51:02 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (28 commits) vhost: logs sharing hw/acpi: piix4_pm_init(): take fw_cfg object no more hw/acpi: move "etc/system-states" fw_cfg file from PIIX4 to core hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4" pc-dimm: don't assert if pc-dimm alignment != hotpluggable mem range size docs: Add PXB documentation apci: fix PXB behaviour if used with unsupported BIOS hw/pxb: add numa_node parameter hw/pci: add support for NUMA nodes hw/pxb: add map_irq func hw/pci: inform bios if the system has extra pci root buses hw/pci: introduce PCI Expander Bridge (PXB) hw/pci: removed 'rootbus nr is 0' assumption from qmp_pci_query hw/acpi: remove from root bus 0 the crs resources used by other buses. hw/acpi: add _CRS method for extra root busses hw/apci: add _PRT method for extra PCI root busses hw/acpi: add support for i440fx 'snooping' root busses hw/pci: extend PCI config access to support devices behind PXB hw/i386: query only for q35/pc when looking for pci host bridge hw/pci: made pci_bus_num a PCIBusClass method ... Conflicts: hw/i386/pc_piix.c Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-04hw/acpi: acpi_pm1_cnt_init(): take "disable_s3" and "disable_s4"Laszlo Ersek
This patch only modifies the function prototype and updates all chipset code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled". RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696 Cc: Amit Shah <amit.shah@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com>
2015-06-03hw/q35: fix floppy controller definition in ich9Marcel Apfelbaum
In DSDT FDC0 declares the IO region as IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04). Use the same in lpc_ich9 initialization code. Now the floppy drive is detected correctly on Windows. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-03hw/isa/i82378.c: Fix misusing qemu_allocate_irqs for single irqShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-03hw/isa/lpc_ich9.c: Fix misusing qemu_allocate_irqs for single irqShannon Zhao
Since ich9_lpc_pm_init only requests one irq, so let it just call qemu_allocate_irq. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-04-02hw: Mark devices picking up char backends actively FIXMEMarkus Armbruster
Character devices defined with -serial and -parallel are for board initialization to wire up. Board code examines serial_hds[] and parallel_hds[] to find them, and creates devices with their qdev chardev properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a chardev property for board code to set: they use serial_hds[] (often via qemu_char_get_next_serial()) or parallel_hds[] in their realize() or init() method to connect to a backend. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is it inconsistent with how the other characrer device models work (they connect to a backend explicitly identified by a "chardev" property), it breaks when the backend has been picked up by the board or a previous -device / device_add already. Example: $ qemu-system-ppc64 -M bamboo -S -device i82378 -device pc87312 -device pc87312 qemu-system-ppc64: -device pc87312: Property 'isa-parallel.chardev' can't take value 'parallel0', it's in use Mark them with suitable FIXME comments. Cc: Li Guang <lig.fnst@cn.fujitsu.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: Antony Pavlov <antonynpavlov@gmail.com> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-04-02hw: Mark devices picking up block backends actively FIXMEMarkus Armbruster
Drives defined with if!=none are for board initialization to wire up. Board code calls drive_get() or similar to find them, and creates devices with their qdev drive properties set accordingly. Except a few devices go on a fishing expedition for a suitable backend instead of exposing a drive property for board code to set: they call driver_get() or drive_get_next() in their realize() or init() method to implicitly connect to the "next" backend with a certain interface type. Picking up backends that way works when the devices are created by board code. But it's inappropriate for -device or device_add. Not only is this inconsistent with how the other block device models work (they connect to a backend explicitly identified by a "drive" property), it breaks when the "next" backend has been picked up by the board already. Example: $ qemu-system-arm -S -M connex -pflash flash.img -device ssi-sd Aborted (core dumped) Mark them with suitable FIXME comments. Cc: Andrzej Zaborowski <balrogg@gmail.com> Cc: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Cc: "Andreas Färber" <andreas.faerber@web.de> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-26acpi, ich9: Add unplug cb for ich9.Tang Chen
Memory and CPU hot unplug are both asynchronous procedures. When the unplug operation happens, unplug request cb is called first. And when guest OS finished handling unplug, unplug cb will be called to do the real removal of device. This patch adds hotunplug cb to ich9, which memory and CPU hot unplug will use it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26acpi, ich9: Add hotunplug request cb for ich9.Tang Chen
Memory and CPU hot unplug are both asynchronous procedures. They both need unplug request cb when the unplug operation happens. This patch adds hotunplug request cb for ich9, and memory and CPU hot unplug will share it. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:47:31 +0000