summaryrefslogtreecommitdiff
path: root/hw/input
AgeCommit message (Collapse)Author
2019-05-15hw/input: Add a CONFIG_PS2 switch for the ps2.c fileThomas Huth
ps2.c only needs to be compiled if we are building pckbd.c or pl050.c. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190411182240.5957-1-thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-13virtio-input: fix Kconfig dependency and MakefileGerd Hoffmann
Make VIRTIO_INPUT_HOST depend on VIRTIO_INPUT. Use CONFIG_VIRTIO_INPUT_HOST in Makefile. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190510105137.17481-2-kraxel@redhat.com
2019-05-10Add vhost-user-input-pciMarc-André Lureau
Add a new virtio-input device, which connects to a vhost-user backend. Instead of reading configuration directly from an input device / evdev (like virtio-input-host), it reads it over vhost-user protocol with {SET,GET}_CONFIG messages. The vhost-user-backend handles the queues & events setup. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190503130034.24916-5-marcandre.lureau@redhat.com [ kraxel: drop -{non-,}transitional variants ] [ kraxel: fix "make check" on !linux ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-04-29hw/devices: Move TI touchscreen declarations into a new headerPhilippe Mathieu-Daudé
Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move Gamepad declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-22trace-events: Fix attribution of trace points to sourceMarkus Armbruster
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of cleanup-trace-events.pl. Same funnies as in the previous commit, of course. Manually shorten its change to linux-user/trace-events to */signal.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 20190314180929.27722-6-armbru@redhat.com Message-Id: <20190314180929.27722-6-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-11audio: use qapi AudioFormat instead of audfmt_eKővágó, Zoltán
I had to include an enum for audio sampling formats into qapi, but that meant duplicating the audfmt_e enum. This patch replaces audfmt_e and associated values with the qapi generated AudioFormat enum. This patch is mostly a search-and-replace, except for switches where the qapi generated AUDIO_FORMAT_MAX caused problems. Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-07virtio: express virtio dependencies with KconfigYang Zhong
Signed-off-by: Yang Zhong <yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-42-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-27i2c: have I2C receive operation return uint8_tCorey Minyard
It is never supposed to fail and cannot return an error, so just have it return the proper type. Have it return 0xff on nothing available, since that's what would happen on a real bus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-14pckbd: Convert DPRINTF->traceDr. David Alan Gilbert
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20181016112232.23241-1-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-06hw/input/tsc210x: Fix building with no verbosityPhilippe Mathieu-Daudé
When building with TSC_VERBOSE not defined, we get: CC arm-softmmu/hw/input/tsc210x.o hw/input/tsc210x.c: In function ‘tsc2102_data_register_write’: hw/input/tsc210x.c:554:5: error: label at end of compound statement default: ^~~~~~~ hw/input/tsc210x.c: In function ‘tsc2102_control_register_write’: hw/input/tsc210x.c:638:5: error: label at end of compound statement bad_reg: ^~~~~~~ hw/input/tsc210x.c: In function ‘tsc2102_audio_register_write’: hw/input/tsc210x.c:766:5: error: label at end of compound statement default: ^~~~~~~ make[1]: *** [rules.mak:69: hw/input/tsc210x.o] Error 1 Fix this by replacing the culprit fprintf(stderr) calls by a more recent API: qemu_log_mask(LOG_GUEST_ERROR). Other fprintf() calls are left untouched. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20190204204517.23698-1-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-30hw: input: set category of the i8042 devicekumar sourav
Sets the category of i8042 device as DEVICE_CATEGORY_INPUT Devices should be assigned to one of DEVICE_CATEGORY_XXXX. Signed-off-by: kumar sourav <sourav.jb1988@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20190125151440.13794-1-sourav.jb1988@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-18qmp hmp: Make system_wakeup check wake-up support and run stateDaniel Henrique Barboza
The qmp/hmp command 'system_wakeup' is simply a direct call to 'qemu_system_wakeup_request' from vl.c. This function verifies if runstate is SUSPENDED and if the wake up reason is valid before proceeding. However, no error or warning is thrown if any of those pre-requirements isn't met. There is no way for the caller to differentiate between a successful wakeup or an error state caused when trying to wake up a guest that wasn't suspended. This means that system_wakeup is silently failing, which can be considered a bug. Adding error handling isn't an API break in this case - applications that didn't check the result will remain broken, the ones that check it will have a chance to deal with it. Adding to that, the commit before previous created a new QMP API called query-current-machine, with a new flag called wakeup-suspend-support, that indicates if the guest has the capability of waking up from suspended state. Although such guest will never reach SUSPENDED state and erroring it out in this scenario would suffice, it is more informative for the user to differentiate between a failure because the guest isn't suspended versus a failure because the guest does not have support for wake up at all. All this considered, this patch changes qmp_system_wakeup to check if the guest is capable of waking up from suspend, and if it is suspended. After this patch, this is the output of system_wakeup in a guest that does not have wake-up from suspend support (ppc64): (qemu) system_wakeup wake-up from suspend is not supported by this guest (qemu) And this is the output of system_wakeup in a x86 guest that has the support but isn't suspended: (qemu) system_wakeup Unable to wake up: guest is not in suspended state (qemu) Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20181205194701.17836-4-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-12-13input/pl050: Convert sysbus init function to realize functionMao Zhongyi
Use DeviceClass rather than SysBusDeviceClass in pl050_class_init(). Cc: peter.maydell@linaro.org Cc: qemu-arm@nongnu.org Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-10-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-13milkymist-softusb: Convert sysbus init function to realize functionMao Zhongyi
Use DeviceClass rather than SysBusDeviceClass in milkymist_softusb_class_init(). Cc: michael@walle.cc Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181130093852.20739-9-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-11-27ps2kbd: default to scan enabled after resetHervé Poussineau
A check for scan_enabled has been added to ps2_keyboard_event in commit 143c04c7e0639e53086519592ead15d2556bfbf2 to prevent stream corruption. This works well as long as operating system is resetting keyboard, or enabling it. This fixes IBM 40p firmware, which doesn't bother sending KBD_CMD_RESET, KBD_CMD_ENABLE or KBD_CMD_RESET_ENABLE before trying to use the keyboard. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20181021190721.2148-1-hpoussin@reactos.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-10-02ps2: prevent changing irq state on save and loadPavel Dovgalyuk
Commit 2858ab09e6f708e381fc1a1cc87e747a690c4884 changed PS/2 keyboard/mouse buffers to the standard size. However, its state may change when migrating from the old buffer size and therefore irq needs updating. But this change made wrong, because it throws the whole queue if there are too much data instead of cropping it. That commit also updates irq (because the queue state may change). But updating the irq may change the VM state (and determinism of the execution). E.g., when replaying the execution, one may save the VM state and the state of the interrupt controller will be updated at the moment of saving, instead of using the recorded update events. This patch makes the queue update deterministic: it removes the update_irq call and crops the queue to prevent losing the characters and changing the required irq status. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180511081601.14610.39946.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-29hw/input/tsc2005: Convert a fprintf() call to trace eventsPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-26hw/input/tsc2005: Use qemu_log_mask(GUEST_ERROR) instead of fprintfPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180624040609.17572-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26hw/input/pckbd: Use qemu_log_mask(GUEST_ERROR) instead of fprintfPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180624040609.17572-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-19Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/input-20180618-pull-request' into staging input: ps2 post_load fix. # gpg: Signature made Mon 18 Jun 2018 11:18:30 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/input-20180618-pull-request: ps2: check PS2Queue wptr pointer in post_load routine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-18ps2: check PS2Queue wptr pointer in post_load routineliujunjie
In commit 802cbcb7300, most issues have been fixed when qemu guest migration. But the queue size still need to check whether is equal to PS2_QUEUE_SIZE. If yes, the wptr should set as 0. Or, wptr would larger than PS2_QUEUE_SIZE and never come back when ps2_queue_noirq is called. This could lead to OOB access, add check to avoid it. Signed-off-by: liujunjie <liujunjie23@huawei.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Message-id: 20180607080237.12360-1-liujunjie23@huawei.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-06-16adb: add property to disable direct reg 3 writesMark Cave-Ayland
MacOS 9 has a bug in its PMU driver whereby after configuring the ADB bus devices it sends another write to reg 3 on both devices resetting them both back to the same address. Add a new disable_direct_reg3_writes property to ADBDevice to disable these direct writes which can enabled just for the upcoming pmu-adb support. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-16adb: fix read reg 3 byte orderingMark Cave-Ayland
According to the Apple ADB documentation, register 3 is a 2-byte register with the device address in the first byte, and the handler ID in the second byte. This is currently the opposite away to which QEMU returns them so switch the order around. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-06-15hw/input/pckbd: Convert away from old_mmioPeter Maydell
Convert the pckbd device away from using the old_mmio field of MemoryRegionOps. This change only affects the memory-mapped variant of the i8042, which is used by the Unicore32 'puv3' board and the MIPS Jazz boards 'magnum' and 'pica61'. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180601141223.26630-6-peter.maydell@linaro.org
2018-06-01hw: make virtio devices configurable via default-configs/Paolo Bonzini
This is only half of the work, because the proxy devices (virtio-*-pci, virtio-*-ccw, etc.) are still included unconditionally. It is still a move in the right direction. Based-on: <20180522194943.24871-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::initPhilippe Mathieu-Daudé
I2CSlaveClass::init is no more used, remove it. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180419212727.26095-3-f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180528144509.15812-3-armbru@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-15ps2: Fix mouse stream corruption due to lost dataGeoffrey McRae
This fixes an issue by adding bounds checking to multi-byte packets where the PS/2 mouse data stream may become corrupted due to data being discarded when the PS/2 ringbuffer is full. Interrupts for Multi-byte responses are postponed until the final byte has been queued. These changes fix a bug where windows guests drop the mouse device entirely requring the guest to be restarted. Signed-off-by: Geoffrey McRae <geoff@hostfission.com> Message-Id: <20180507150310.2FEA0381924@moya.office.hostfission.com> [ kraxel: codestyle fixes ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-05-15ps2: Clear the PS/2 queue and obey disableGeoffrey McRae
This allows guest's to correctly reinitialize and identify the mouse should the guest decide to re-scan or reset during mouse input events. When the guest sends the "Identify" command, due to the PC's hardware architecutre it is impossible to reliably determine the response from the command amongst other streaming data, such as mouse or keyboard events. Standard practice is for the guest to disable the device and then issue the identify command, so this must be obeyed. Signed-off-by: Geoffrey McRae <geoff@hostfission.com> Message-Id: <20180507150303.7486B381924@moya.office.hostfission.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-03-12hw/input/i8042: Extract declarations from i386/pc.h into input/i8042.hPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> (hw/ppc) Message-Id: <20180308223946.26784-4-f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-06adb: add trace-events for monitoring keyboard/mouse during bus enumerationMark Cave-Ayland
This is useful to help diagnose problems related to address clashes during MacOS 9 boot. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-02-05qdev: use device_class_set_parent_realize/unrealize/reset()Philippe Mathieu-Daudé
changes generated using the following Coccinelle patch: @@ type DeviceParentClass; DeviceParentClass *pc; DeviceClass *dc; identifier parent_fn; identifier child_fn; @@ ( +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->realize; ... -dc->realize = child_fn; | +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->unrealize; ... -dc->unrealize = child_fn; | +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->reset; ... -dc->reset = child_fn; ) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180114020412.26160-4-f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-29Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/input-20180129-v2-pull-request' into staging input: switch devices to keycodemapdb, bugfixes. # gpg: Signature made Mon 29 Jan 2018 10:23:00 GMT # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/input-20180129-v2-pull-request: hw: convert virtio-input-hid device to keycodemapdb ui: fix alphabetical ordering of keymaps hw: convert the escc device to keycodemapdb hw: convert ps2 device to keycodemapdb ps2: check PS2Queue pointers in post_load routine input: virtio: don't send mouse wheel event twice input: add mouse side buttons to virtio input Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29hw: convert virtio-input-hid device to keycodemapdbDaniel P. Berrange
Replace the keymap_qcode table with automatically generated tables. Missing entries in keymap_qcode now fixed: Q_KEY_CODE_ASTERISK -> KEY_KPASTERISK Q_KEY_CODE_KP_MULTIPLY -> KEY_KPASTERISK Q_KEY_CODE_STOP -> KEY_STOP Q_KEY_CODE_AGAIN -> KEY_AGAIN Q_KEY_CODE_PROPS -> KEY_PROPS Q_KEY_CODE_UNDO -> KEY_UNDO Q_KEY_CODE_FRONT -> KEY_FRONT Q_KEY_CODE_COPY -> KEY_COPY Q_KEY_CODE_OPEN -> KEY_OPEN Q_KEY_CODE_PASTE -> KEY_PASTE Q_KEY_CODE_FIND -> KEY_FIND Q_KEY_CODE_CUT -> KEY_CUT Q_KEY_CODE_LF -> KEY_LINEFEED Q_KEY_CODE_HELP -> KEY_HELP Q_KEY_CODE_COMPOSE -> KEY_COMPOSE Q_KEY_CODE_RO -> KEY_RO Q_KEY_CODE_HIRAGANA -> KEY_HIRAGANA Q_KEY_CODE_HENKAN -> KEY_HENKAN Q_KEY_CODE_YEN -> KEY_YEN Q_KEY_CODE_KP_COMMA -> KEY_KPCOMMA Q_KEY_CODE_KP_EQUALS -> KEY_KPEQUAL Q_KEY_CODE_POWER -> KEY_POWER Q_KEY_CODE_SLEEP -> KEY_SLEEP Q_KEY_CODE_WAKE -> KEY_WAKEUP Q_KEY_CODE_AUDIONEXT -> KEY_NEXTSONG Q_KEY_CODE_AUDIOPREV -> KEY_PREVIOUSSONG Q_KEY_CODE_AUDIOSTOP -> KEY_STOPCD Q_KEY_CODE_AUDIOPLAY -> KEY_PLAYPAUSE Q_KEY_CODE_AUDIOMUTE -> KEY_MUTE Q_KEY_CODE_VOLUMEUP -> KEY_VOLUMEUP Q_KEY_CODE_VOLUMEDOWN -> KEY_VOLUMEDOWN Q_KEY_CODE_MEDIASELECT -> KEY_MEDIA Q_KEY_CODE_MAIL -> KEY_MAIL Q_KEY_CODE_CALCULATOR -> KEY_CALC Q_KEY_CODE_COMPUTER -> KEY_COMPUTER Q_KEY_CODE_AC_HOME -> KEY_HOMEPAGE Q_KEY_CODE_AC_BACK -> KEY_BACK Q_KEY_CODE_AC_FORWARD -> KEY_FORWARD Q_KEY_CODE_AC_REFRESH -> KEY_REFRESH Q_KEY_CODE_AC_BOOKMARKS -> KEY_BOOKMARKS NB, the virtio-input device reports a bitmask to the guest driver that has a bit set for each Linux keycode that the host is able to send to the guest. Thus by adding these extra key mappings we are technically changing the host<->guest ABI. This would also happen any time we defined new mappings for QEMU keycodes in future. When a keycode is removed from the list of possible keycodes that host can send to the guest, it means that the guest OS will think it is possible to receive a key that in pratice can never be generated, which is harmless. When a keycode is added to the list of possible keycodes that the host can send to the guest, it means that the guest OS can see an unexpected event. The Linux virtio_input.c driver code simply forwards this event to the input_event() method in the Linux input subsystem. This in turn calls input_handle_event(), which then calls input_get_disposition(). This method checks if the input event is present in the permitted keys bitmap, and if not returns INPUT_IGNORE_EVENT. Thus the unexpected event will get dropped, which is harmless. If the guest OS reboots, or otherwise re-initializes the virt-input device, it will read the new keycode bitmap. No matter how many keys are defined, the config space has a fixed 128 byte bitmap. There is, however, a size field defiend which says how many bytes in the bitmap are used. So the guest OS reads the size of the bitmap, and then it reads the data from bitmap upto the designated size. So if the guest OS re-initializes at precisely the time that QEMU is migrated across versions, in the worst case, it could conceivably read the old size field, but then get the newly updated bitmap. If a key were added this is harmless, since it simply means it may not process the newly added key. If a key were removed, then it could be readnig a byte from the bitmap that was not initialized. Fortunately QEMU always memsets() the entire bitmap to 0, prior to setting keybits. Thus the guest OS will simply read zeros, which is again harmless. Based on this analysis, it is believed that there is no need to preserve the virtio-input-hid keymaps across migration, as the host<->guest ABI change is harmless and self-resolving at time of guest reboot. NB, this behaviour should perhaps be formalized in the virtio-input spec to declare how guest OS drivers should be written to be robust in their handling of the potentially changable key bitmaps. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20180117164118.8510-5-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-29hw: convert ps2 device to keycodemapdbDaniel P. Berrange
Replace the qcode_to_keycode_set1, qcode_to_keycode_set2, and qcode_to_keycode_set3 tables with automatically generated tables. Missing entries in qcode_to_keycode_set1 now fixed: - Q_KEY_CODE_SYSRQ -> 0x54 - Q_KEY_CODE_PRINT -> 0x54 (NB ignored due to special case) - Q_KEY_CODE_AGAIN -> 0xe005 - Q_KEY_CODE_PROPS -> 0xe006 - Q_KEY_CODE_UNDO -> 0xe007 - Q_KEY_CODE_FRONT -> 0xe00c - Q_KEY_CODE_COPY -> 0xe078 - Q_KEY_CODE_OPEN -> 0x64 - Q_KEY_CODE_PASTE -> 0x65 - Q_KEY_CODE_CUT -> 0xe03c - Q_KEY_CODE_LF -> 0x5b - Q_KEY_CODE_HELP -> 0xe075 - Q_KEY_CODE_COMPOSE -> 0xe05d - Q_KEY_CODE_PAUSE -> 0xe046 - Q_KEY_CODE_KP_EQUALS -> 0x59 And some mistakes corrected: - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana) instead of of 0x77 (Hirigana) - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xe05d) and is now mapped to 0xe01e - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead of to 0xe041 (Find) - Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0 as the prefix Missing entries in qcode_to_keycode_set2 now fixed: - Q_KEY_CODE_PRINT -> 0x7f (NB ignored due to special case) - Q_KEY_CODE_COMPOSE -> 0xe02f - Q_KEY_CODE_PAUSE -> 0xe077 - Q_KEY_CODE_KP_EQUALS -> 0x0f And some mistakes corrected: - Q_KEY_CODE_HIRAGANA was mapped to 0x13 (Katakanahiragana) instead of of 0x62 (Hirigana) - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0xe02f) and is now not mapped - Q_KEY_CODE_FIND was mapped to 0xe010 (Search) and is now not mapped. - Q_KEY_CODE_POWER, SLEEP & WAKE had 0x0e instead of 0xe0 as the prefix Missing entries in qcode_to_keycode_set3 now fixed: - Q_KEY_CODE_ASTERISK -> 0x7e - Q_KEY_CODE_SYSRQ -> 0x57 - Q_KEY_CODE_LESS -> 0x13 - Q_KEY_CODE_STOP -> 0x0a - Q_KEY_CODE_AGAIN -> 0x0b - Q_KEY_CODE_PROPS -> 0x0c - Q_KEY_CODE_UNDO -> 0x10 - Q_KEY_CODE_COPY -> 0x18 - Q_KEY_CODE_OPEN -> 0x20 - Q_KEY_CODE_PASTE -> 0x28 - Q_KEY_CODE_FIND -> 0x30 - Q_KEY_CODE_CUT -> 0x38 - Q_KEY_CODE_HELP -> 0x09 - Q_KEY_CODE_COMPOSE -> 0x8d - Q_KEY_CODE_AUDIONEXT -> 0x93 - Q_KEY_CODE_AUDIOPREV -> 0x94 - Q_KEY_CODE_AUDIOSTOP -> 0x98 - Q_KEY_CODE_AUDIOMUTE -> 0x9c - Q_KEY_CODE_VOLUMEUP -> 0x95 - Q_KEY_CODE_VOLUMEDOWN -> 0x9d - Q_KEY_CODE_CALCULATOR -> 0xa3 - Q_KEY_CODE_AC_HOME -> 0x97 And some mistakes corrected: - Q_KEY_CODE_MENU was incorrectly mapped to the compose scancode (0x8d) and is now 0x91 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20180117164118.8510-2-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-29ps2: check PS2Queue pointers in post_load routinePrasad J Pandit
During Qemu guest migration, a destination process invokes ps2 post_load function. In that, if 'rptr' and 'count' values were invalid, it could lead to OOB access or infinite loop issue. Add check to avoid it. Reported-by: Cyrille Chatras <cyrille.chatras@orange.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Message-id: 20171116075155.22378-1-ppandit@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-29input: virtio: don't send mouse wheel event twiceMiika S
On Linux, a mouse event is generated for both down and up when mouse wheel is used. This caused virtio_input_send() to be called twice each time the wheel was used. This commit adds a check for the button down state and only calls virtio_input_send() when it is true. Signed-off-by: Miika S <miika9764@gmail.com> Message-Id: <20171222152531.1849-4-miika9764@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-29input: add mouse side buttons to virtio inputMiika S
Signed-off-by: Miika S <miika9764@gmail.com> Message-Id: <20171222152531.1849-3-miika9764@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-27input: add missing newline from trace-eventsMark Cave-Ayland
This was accidentally omitted from 77cb0f5aaf "Split adb.c into adb.c, adb-mouse.c and adb-kbd.c". Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2018-01-22Replace all occurances of __FUNCTION__ with __func__Alistair Francis
Replace all occurs of __FUNCTION__ except for the check in checkpatch with the non GCC specific __func__. One line in hcd-musb.c was manually tweaked to pass checkpatch. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> [THH: Removed hunks related to pxa2xx_mmci.c (fixed already)] Signed-off-by: Thomas Huth <thuth@redhat.com>
2017-12-21Split adb.c into adb.c, adb-mouse.c and adb-kbd.cLaurent Vivier
It makes the code clearer to separate the bus implementation from the devices one. Replace ADB_DPRINTF() with trace events (and adding new ones in adb-kbd.c). Some minor changes to make checkpatch.pl happy. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20171220121406.24056-1-laurent@vivier.eu>
2017-12-18i386/pc: move vmmouse.c to hw/i386/Philippe Mathieu-Daudé
It's a x86-only device, so it does not make sense to keep it in the shared misc folder. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18hw/input/vmmouse: remove unused #includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18misc: avoid "include/" in include pathPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 02:47:38 +0000