summaryrefslogtreecommitdiff
path: root/hw/gpio/pl061.c
AgeCommit message (Collapse)Author
2021-07-09hw/gpio/pl061: Document a shortcoming in our implementationPeter Maydell
The Luminary PL061s in the Stellaris LM3S9695 don't all have the same reset value for GPIOPUR. We can get away with not letting the board configure the PUR reset value because we don't actually wire anything up to the lines which should reset to pull-up. Add a comment noting this omission. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2021-07-09hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on resetPeter Maydell
The PL061 comes out of reset with all its lines configured as input, which means they might need to be pulled to 0 or 1 depending on the 'pullups' and 'pulldowns' properties. Currently we do not assert these lines on reset; they will only be set whenever the guest first touches a register that triggers a call to pl061_update(). Convert the device to three-phase reset so we have a place where we can safely call qemu_set_irq() to set the floating lines to their correct values. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Make pullup/pulldown of outputs configurablePeter Maydell
The PL061 GPIO does not itself include pullup or pulldown resistors to set the value of a GPIO line treated as an output when it is configured as an input (ie when the PL061 itself is not driving it). In real hardware it is up to the board to add suitable pullups or pulldowns. Currently our implementation hardwires this to "outputs pulled high", which is correct for some boards (eg the realview ones: see figure 3-29 in the "RealView Platform Baseboard for ARM926EJ-S User Guide" DUI0224I), but wrong for others. In particular, the wiring in the 'virt' board and the gpio-pwr device assumes that wires should be pulled low, because otherwise the pull-to-high will trigger a shutdown or reset action. (The only reason this doesn't happen immediately on startup is due to another bug in the PL061, where we don't assert the GPIOs to the correct value on reset, but will do so as soon as the guest touches a register and pl061_update() gets called.) Add properties to the pl061 so the board can configure whether it wants GPIO lines to have pullup, pulldown, or neither. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registersPeter Maydell
The Luminary variant of the PL061 has registers GPIOPUR and GPIOPDR which lets the guest configure whether the GPIO lines are pull-up, pull-down, or truly floating. Instead of assuming all lines are pulled high, honour the PUR and PDR registers. For the plain PL061, continue to assume that lines have an external pull-up resistor, as we did before. The stellaris board actually relies on this behaviour -- the CD line of the ssd0323 display device is connected to GPIO output C7, and it is only because of a different bug which we're about to fix that we weren't incorrectly driving this line high on reset and putting the ssd0323 into data mode. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Document the interface of this devicePeter Maydell
Add a comment documenting the "QEMU interface" of this device: which MMIO regions, IRQ lines, GPIO lines, etc it exposes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Add tracepoints for register read and writePeter Maydell
Add tracepoints for reads and writes to the PL061 registers. This requires restructuring pl061_read() to only return after the tracepoint, rather than having lots of early-returns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Clean up read/write offset handling logicPeter Maydell
Currently the pl061_read() and pl061_write() functions handle offsets using a combination of three if() statements and a switch(). Clean this up to use just a switch, using case ranges. This requires that instead of catching accesses to the luminary-only registers on a stock PL061 via a check on s->rsvd_start we use an "is this luminary?" check in the cases for each luminary-only register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2021-07-09hw/gpio/pl061: Convert DPRINTF to tracepointsPeter Maydell
Convert the use of the DPRINTF debug macro in the PL061 model to use tracepoints. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-05-21ARM: PL061: Introduce N_GPIOSGeert Uytterhoeven
Add a definition for the number of GPIO lines controlled by a PL061 instance, and use it instead of the hardcoded magic value 8. Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200519085143.1376-1-geert+renesas@glider.be Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2016-06-14hw/gpio: QOM'ify pl061.cxiaoqiang zhao
* Merge the pl061_initfn into pl061_init * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-26ARM: PL061: Checking register r/w accesses to reserved areaWei Huang
pl061.c emulates two GPIO devices, ARM PL061 and TI Stellaris, which share the same read/write functions (pl061_read and pl061_write). However PL061 and Stellaris have different GPIO register definitions and pl061_read()/pl061_write() doesn't check it. This patch enforces checking on offset, preventing R/W into the reserved memory area. Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1455814580-17699-1-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18ARM: PL061: Cleaning field of PL061 device stateWei Huang
This patch removes the float_high field of PL061State, which doesn't seem to be used anywhere. Because this changes the device state, the version ID is also bumped up for the reason of compatiblity. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455729552-28026-3-git-send-email-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18ARM: PL061: Clear PL061 device state after resetWei Huang
Current QEMU doesn't clear PL061 state after reset. This causes a weird issue with guest reboot via GPIO. Here is the device state with two reboot requests: (PL061State fields) data old_in_data istate VM boot 0 0 0 After 1st ACPI reboot request 8 8 8 After VM PL061 driver ACK 8 8 0 After VM reboot 8 8 0 ------------------------------------------------------------ 2nd ACPI reboot request 8 In the second reboot request above, because the old_in_data field is 8, QEMU decides that there is a pending edge IRQ already (see pl061_update()) in input; so it doesn't raise up IRQ again. As a result the second reboot request is lost. The correct way is to clear PL061 device state after reset. The default reset state is found from the documents listed below. Per Peter's suggestion that QEMU automatically calls reset function after device initialization, this patch removes calling pl061_reset() from pl061_initfn(). Reference: [1] PL061 Technical Reference Manual [2] Stellaris LM3S8962 Microcontroller Data Sheet [3] Stellaris LM3S5P31 Microcontroller Data Sheet Signed-off-by: Wei Huang <wei@redhat.com> Message-id: 1455729552-28026-2-git-send-email-wei@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-29arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2015-06-02pl061: fix wrong calculation of GPIOMIS registerVictor CLEMENT
The masked interrupt status register should be the state of the interrupt after masking. There should be a logical AND instead of a logical OR between the interrupt status and the interrupt mask. Signed-off-by: Victor CLEMENT <victor.clement@openwide.fr> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1433154824-6927-1-git-send-email-victor.clement@openwide.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-12pl061: implement input interrupt logicColin Leitner
This patch adds the missing input interrupt logic to the pl061 GPIO device. To keep the floating output pins to stay high, the old state variable had to be split into two separate ones for input and output - which brings the vmstate version to 3. Edge level interrupts and I/O were tested under Linux 3.14. Level interrupt handling hasn't been tested. Signed-off-by: Colin Leitner <colin.leitner@googlemail.com> Message-id: 54024FD2.9080204@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-07-29pl061: QOM'ify pl061 and pl061_luminaryAndreas Färber
Let pl061_luminary inherit from pl061, with differing instance_init. Introduce type constant and use QOM casts. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29pl061: Rename pl061_state to PL061StateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/gpio: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 23:32:52 +0000