summaryrefslogtreecommitdiff
path: root/hw/acpi/Makefile.objs
AgeCommit message (Collapse)Author
2019-01-17acpi: build TPM Physical Presence interfaceStefan Berger
The TPM Physical Presence interface consists of an ACPI part, a shared memory part, and code in the firmware. Users can send messages to the firmware by writing a code into the shared memory through invoking the ACPI code. When a reboot happens, the firmware looks for the code and acts on it by sending sequences of commands to the TPM. This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't assume that SMIs are necessary to use. It uses a similar datastructure for the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use of it. I extended the shared memory data structure with an array of 256 bytes, one for each code that could be implemented. The array contains flags describing the individual codes. This decouples the ACPI implementation from the firmware implementation. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/ This patch implements version 1.30. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André - ACPI code improvements and windows fixes ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02ACPI: Add Virtual Machine Generation ID supportBen Warren
This implements the VM Generation ID feature by passing a 128-bit GUID to the guest via a fw_cfg blob. Any time the GUID changes, an ACPI notify event is sent to the guest The user interface is a simple device with one parameter: - guid (string, must be "auto" or in UUID format xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx) Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-16acpi: filter based on CONFIG_ACPI_X86 rather than TARGETPaolo Bonzini
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub instead, so that -acpitable can be later extended to ARM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move acpi stubs to hw/acpiPaolo Bonzini
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-10memhp: move build_memory_hotplug_aml() into memory_hotplug.cIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-11-01nvdimm acpi: compile nvdimm acpi code arch-independentlyXiao Guangrong
As the arch dependent info, TARGET_PAGE_SIZE, has been dropped from nvdimm acpi code, it can be compiled arch-independently Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: cpuhp: add CPU devices AML with _STA methodIgor Mammedov
it adds CPU objects to DSDT with _STA method and QEMU side of CPU hotplug interface initialization with registers sufficient to handle _STA requests, including necessary hotplug callbacks in piix4,ich9 code. Hot-(un)plug hw/acpi parts will be added by corresponding follow up patches. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: Add IPMI table entriesCorey Minyard
Use the ACPI table construction tools to create an ACPI entry for IPMI. This adds a function called build_acpi_ipmi_devices to add an DSDT entry for IPMI if IPMI is compiled in and an IPMI device exists. It also adds a dummy function if IPMI is not compiled in. This conforms to section "C3-2 Locating IPMI System Interfaces in ACPI Name Space" in the IPMI 2.0 specification. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-07pc: acpi: consolidate legacy CPU hotplug in one fileIgor Mammedov
Since AML part of CPU hotplug is tightly coupled with its hardware part (IO port layout/protocol), move build_legacy_cpu_hotplug_aml() to cpu_hotplug.c and remove empty cpu_hotplug_acpi_table.c Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
2016-03-11nvdimm acpi: initialize the resource used by NVDIMM ACPIXiao Guangrong
32 bits IO port starting from 0x0a18 in guest is reserved for NVDIMM ACPI emulation. The table, NVDIMM_DSM_MEM_FILE, will be patched into NVDIMM ACPI binary code OSPM uses this port to tell QEMU the final address of the DSM memory and notify QEMU to emulate the DSM method Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-09pc: acpi: cpuhp: move CPEJ() method to SSDTIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-08pc: acpi: memhp: prepare context in SSDT for moving memhp DSDT codeIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-12-22nvdimm acpi: build ACPI NFIT tableXiao Guangrong
NFIT is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT) Currently, we only support PMEM mode. Each device has 3 structures: - SPA structure, defines the PMEM region info - MEM DEV structure, it has the @handle which is used to associate specified ACPI NVDIMM device we will introduce in later patch. Also we can happily ignored the memory device's interleave, the real nvdimm hardware access is hidden behind host - DCR structure, it defines vendor ID used to associate specified vendor nvdimm driver. Since we only implement PMEM mode this time, Command window and Data window are not needed The NVDIMM functionality is controlled by the parameter, 'nvdimm', which is introduced for the machine, there is a example to enable it: -machine pc,nvdimm -m 8G,maxmem=100G,slots=100 -object \ memory-backend-file,id=mem1,share,mem-path=/tmp/nvdimm1,size=10G -device \ nvdimm,memdev=mem1,id=nv1 It is disabled on default Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07ich9: add TCO interface emulationPaulo Alcantara
This interface provides some registers within a 32-byte range and can be acessed through PCI-to-LPC bridge interface (PMBASE + 0x60). It's commonly used as a watchdog timer to detect system lockups through SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If NO_REBOOT bit is not set in GCS (General Control and Status register), the system will be resetted upon second timeout if TCO_RLD register wasn't previously written to prevent timeout. This patch adds support to TCO watchdog logic and few other features like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection, etc. are not implemented yet. Signed-off-by: Paulo Alcantara <pcacjr@zytor.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-07acpi: split out ICH ACPI supportMichael S. Tsirkin
MIPS doesn't need it, and including it creates problem as we are adding dependency on ISA LPC bridge. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-29ACPI: split CONFIG_ACPI into 4 piecesShannon Zhao
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86 to make it only for x86. ARM doesn't support cpu and memory hotplug, add CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them for target-arm. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-26acpi: move generic aml building helpers into dedictated fileIgor Mammedov
the will be later used for composing AML primitives and all that could be reused later for ARM machines as well. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-01-27bios-linker-loader: move source to common locationMichael S. Tsirkin
There are plans to use bios linker by MIPS, ARM. It's only used by ACPI ATM, so put it in hw/acpi and make it depend on CONFIG_ACPI. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi: introduce TYPE_ACPI_DEVICE_IF interfaceIgor Mammedov
... it will be used to abstract generic ACPI bits from device that implements ACPI interface. ACPIOSTInfo type is used for passing-through raw _OST event/status codes reported by guest OS to a management layer. It lets management tools interpret values as specified by ACPI spec if it is interested in it. QEMU doesn't encode these values as enum, since it doesn't need to handle them and it allows interface to scale well without any changes in QEMU while guest OS and management evolves in time. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19acpi: memory hotplug ACPI hardware implementationIgor Mammedov
- implements QEMU hardware part of memory hotplug protocol described at "docs/specs/acpi_mem_hotplug.txt" - handles only memory add notification event for now Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi: factor out common cpu hotplug code for PIIX4/Q35Igor Mammedov
.. so it could be used for adding CPU hotplug to Q35 machine Add an additional header with that will be shared between C and ASL code: include/hw/acpi/cpu_hotplug_defs.h Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pcihp: generalization of piix4 acpiMichael S. Tsirkin
Add ACPI based PCI hotplug library with bridge hotplug support. Design - each bus gets assigned "bsel" property. - ACPI code writes this number to a new BNUM register, then uses existing UP/DOWN registers to probe slot status; to eject, write number to BNUM register, then slot into existing EJ. The interface is actually backwards-compatible with existing PIIX4 ACPI (though not migration compatible). This is split out from PIIX4 codebase so we can reuse it for Q35 as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make subdirectories for devicesPaolo Bonzini
Prepare the new directory structure. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 23:49:56 +0000