summaryrefslogtreecommitdiff
path: root/hw/Makefile.objs
AgeCommit message (Collapse)Author
2019-07-15Makefile: do not repeat $(CONFIG_SOFTMMU) in hw/Makefile.objsPaolo Bonzini
The device directories must be included only for softmmu builds. Instead of repeating $(CONFIG_SOFTMMU), use an "if". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-28semihosting: move semihosting configuration into its own directoryAlex Bennée
In preparation for having some more common semihosting code let's excise the current config magic from vl.c into its own file. We shall later add more conditionals to the build configurations so we can avoid building this if we don't need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-07i2c: express dependencies with KconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-38-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-079pfs: remove unnecessary conditionalsPaolo Bonzini
The VIRTIO_9P || VIRTFS && XEN condition can be computed in hw/Makefile.objs, removing an "if" from hw/9pfs/Makefile.objs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCIPaolo Bonzini
Make hw/vfio configurable and add new CONFIG_VFIO_* to the default-configs/s390x*-softmmu.mak. This allow a finer-grain selection of the various VFIO backends. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05vfio: move conditional up to hw/Makefile.objsPaolo Bonzini
Instead of wrapping the entire Makefile.objs with an ifeq/endif, just include the directory only for Linux. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190202072456.6468-4-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-24memory-device: introduce separate config optionDavid Hildenbrand
Some architectures might support memory devices, while they don't support DIMM/NVDIMM. So let's - Rename CONFIG_MEM_HOTPLUG to CONFIG_MEM_DEVICE - Introduce CONFIG_DIMM and use it similarly to CONFIG NVDIMM CONFIG_DIMM and CONFIG_NVDIMM require CONFIG_MEM_DEVICE. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20181005092024.14344-7-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-19hyperv: factor out arch-independent API into hw/hypervRoman Kagan
A significant part of hyperv.c is not actually tied to x86, and can be moved to hw/. This will allow to maintain most of Hyper-V and VMBus target-independent, and to avoid conflicts with inclusion of arch-specific headers down the road in VMBus implementation. Also this stuff can now be opt-out with CONFIG_HYPERV. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Message-Id: <20180921082041.29380-4-rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: allow compiling out SCSIPaolo Bonzini
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-19hw/rdma: Add wrappers and macrosYuval Shaia
As all mapping for this device are from driver to device, declare wrappers on top of pci_dma_*map functions. In addition, declare macros to be used for debug messages. Reviewed-by: Dotan Barak <dotanb@mellanox.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2017-08-309pfs: fix dependenciesCornelia Huck
Nothing in fsdev/ or hw/9pfs/ depends on pci; it should rather depend on CONFIG_VIRTFS and CONFIG_VIRTIO/CONFIG_XEN only. Acked-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-01-16acpi: filter based on CONFIG_ACPI_X86 rather than TARGETPaolo Bonzini
Copy the mechanism of hw/smbios/smbios-stub.c to implement an ACPI-stub instead, so that -acpitable can be later extended to ARM. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move vhost stubs to stubs/vhost.oPaolo Bonzini
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16smbios: filter based on CONFIG_SMBIOS rather than TARGETLeif Lindholm
-smbios command line options were accepted but silently ignored on TARGET_ARM, due to a test for TARGET_I386 in arch_init.c. Copy the mechanism of hw/pci/pci-stub.c to implement an smbios-stub instead, enabled for all targets without CONFIG_SMBIOS. Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org> Message-Id: <20161222151828.28292-1-leif.lindholm@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-04STM32F2xx: Add the ADC deviceAlistair Francis
Add the STM32F2xx ADC device. This device randomly generates values on each read. This also includes creating a hw/adc directory. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-22Add a base IPMI interfaceCorey Minyard
Add the basic IPMI types and infrastructure to QEMU. Low-level interfaces and simulation interfaces will register with this; it's kind of the go-between to tie them together. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-08-13smbios: move smbios code into a common folderWei Huang
To share smbios among different architectures, this patch moves SMBIOS code (smbios.c and smbios.h) from x86 specific folders into new hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in x86 default config files. Acked-by: Gabriel Somlo <somlo@cmu.edu> Tested-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-12-19vfio: move hw/misc/vfio.c to hw/vfio/pci.c Move vfio.h into include/hw/vfioKim Phillips
This is done in preparation for the addition of VFIO platform device support. Signed-off-by: Kim Phillips <kim.phillips@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-06-19pc: implement pc-dimm device abstractionVasilis Liaskovitis
Each hotplug-able memory slot is a PCDIMMDevice. A hot-add operation for a memory device: - creates a new PCDIMMDevice and makes hotplug controller to map it into guest address space Hotplug operations are done through normal device_add commands. For migration case, all hotplugged memory devices on source should be specified on target's command line using '-device' option with properties set to the same values as on source. To simplify review, patch introduces only PCDIMMDevice QOM skeleton that will be extended by following patches to implement actual memory hotplug and related functions. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-03-04hw/9pfs: Include virtio-9p-device.o in buildAneesh Kumar K.V
After commit ba1183da9a10b94611cad88c44a5c6df005f9b55 we are including hw/Makefile.objs directly from Makefile.target. Make sure hw/Makefile.objs rules doesn't depend on variable defined in Makefile.objs Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2014-02-14ipack: Move IndustryPack out of hw/char/Andreas Färber
Move the header defining an IPackBus and IPackDevice base class into a new include/ directory and move their implementation and a PCI-IndustryPack bridge out of hw/char/ directory into a new hw/ipack/. Acked-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-05pcmcia: QOM'ify PCMCIACardState and MicroDriveStateAndreas Färber
Turn PCMCIACardState into a device. Move callbacks to new PCMCIACardClass. Derive TYPE_MICRODRIVE from TYPE_PCMCIA_CARD. Replace ide_init2_with_non_qdev_drives(). Signed-off-by: Othmar Pasteka <pasteka@kabsi.at> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-19virtio: simplify Makefile conditionalsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15tpm: reorganize headers and split hardware partPaolo Bonzini
The TPM subsystem does not have a full front-end/back-end separation. The sole available backend, tpm_passthrough, depends on the data structures of the sole available frontend, tpm_tis. However, we can at least try to split the user interface (tpm.c) from the implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h, which is shared between tpm_tis.c and tpm_passthrough.c; instead it moves more stuff to tpm_backend.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move VFIO and ivshmem to hw/misc/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move PCI bridges to hw/pci-* or hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move virtio devices to hw/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make subdirectories for devicesPaolo Bonzini
Prepare the new directory structure. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-25VMXNET3 device implementationDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-25Packet abstraction for VMWARE network devicesDmitry Fleytman
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com> Signed-off-by: Yan Vugenfirer <yan@daynix.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-15pl330: Initial versionPeter Crosthwaite
Device model for Primecell PL330 DMA controller. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Tested-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 098aac26233d7334bed2bca4f06f539638ca6d24.1361853677.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-03-01hw: move boards and other isolated files to hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move fifo.[ch] to libqemuutilPaolo Bonzini
fifo.c is generic code that can be easily unit tested. So it belongs in libqemuutil. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move char backends to backends/Paolo Bonzini
Braille and msmouse support is in hw/, but it is not hardware. Move it to the backends/ directory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-19allow disabling usb smartcard supportGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-26build: remove extra-obj-yPaolo Bonzini
extra-obj-y is somewhat complicated to understand. Replace it with a special CONFIG_ALL symbol that is defined only at toplevel. This limits the case of directories defining more than one *-obj-y target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-26build: remove universal-obj-yPaolo Bonzini
All of universal-obj-y, user-obj-y (right now unused) and common-obj-y can be unified into common-obj-y if we take care of defining CONFIG_SOFTMMU and CONFIG_USER_ONLY in the toplevel makefile. This is similar to how we define symbols for hardware components. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-21virtio-bus: introduce virtio-busKONRAD Frederic
Introduce virtio-bus. Refactored transport device will create a bus which extends virtio-bus. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14Add GE IP-Octal 232 IndustryPack emulationAlberto Garcia
The GE IP-Octal 232 is an IndustryPack module that implements eight RS-232 serial ports, each one of which can be redirected to a character device in the host. Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-14Add TEWS TPCI200 IndustryPack emulationAlberto Garcia
The TPCI200 is a PCI board that supports up to 4 IndustryPack modules. A new bus type called 'IndustryPack' has been created so any compatible module can be attached to this board. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-12build: consolidate multiple variables into universal-obj-yPaolo Bonzini
The directory descent mechanism, and a less-flat tree both helped in making some *-obj-y definitions very short. Many of these often end up in universal-obj-y, and used to be separate only because of libuser (which is now part of history...). Consolidate these variables in a single one. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12build: remove CONFIG_SMARTCARDPaolo Bonzini
The passthru smartcard does not have the shared library dependency, build it unconditionally. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-10Merge branch 'master' of git://git.qemu.org/qemu into prep-upAndreas Färber
Conflicts: hw/Makefile.objs hw/ppc_prep.c Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2013-01-08qdev: Include qdev code into *-user, tooEduardo Habkost
The code depends on some functions from qemu-option.o, so add qemu-option.o to universal-obj-y to make sure it's included. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-03dataplane: use linux-headers/ for virtio includesStefan Hajnoczi
The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that we use linux-headers/ instead of the system-wide headers, which may be out-of-date on older distros. This resolves the following build error on Debian 6: CC hw/dataplane/vring.o cc1: warnings being treated as errors hw/dataplane/vring.c: In function 'vring_enable_notification': hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event' hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event' hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment Note that we now build dataplane/ for each target instead of only once. There is no way around this since linux-headers/ is only available for per-target objects - and it's how virtio, vfio, kvm, and friends are built. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 19:35:02 +0000