summaryrefslogtreecommitdiff
path: root/hmp.c
AgeCommit message (Collapse)Author
2016-09-05block: Allow node name for 'qemu-io' HMP commandKevin Wolf
When using a node name, create a temporary BlockBackend that is used to run the qemu-io command. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-05drive-backup: added support for data compressionPavel Butsykin
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. The patch adds a flag to the qmp/hmp drive-backup command which enables block compression. Compression should be implemented in the format driver to enable this feature. There are some limitations of the format driver to allow compressed writes. We can write data only once. Though for backup this is perfectly fine. These limitations are maintained by the driver and the error will be reported if we are doing something wrong. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: simplify drive-backupPavel Butsykin
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting drive-backup parameters. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-19block: Simplify drive-mirrorEric Blake
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting drive-mirror parameters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-Id: <1468535878-3760-1-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-19block: Simplify block_set_io_throttleEric Blake
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting throttle parameters. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Message-Id: <1468468228-27827-11-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-13stream: Add 'job-id' parameter to 'block-stream'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'block-stream', allowing the user to specify the ID of the block job to be created. The HMP 'block_stream' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13backup: Add 'job-id' parameter to 'blockdev-backup' and 'drive-backup'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'blockdev-backup' and 'drive-backup', allowing the user to specify the ID of the block job to be created. The HMP 'drive_backup' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-13mirror: Add 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror'Alberto Garcia
This patch adds a new optional 'job-id' parameter to 'blockdev-mirror' and 'drive-mirror', allowing the user to specify the ID of the block job to be created. The HMP 'drive_mirror' command remains unchanged. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-07-06qapi: Add new visit_complete() functionEric Blake
Making each output visitor provide its own output collection function was the only remaining reason for exposing visitor sub-types to the rest of the code base. Add a polymorphic visit_complete() function which is a no-op for input visitors, and which populates an opaque pointer for output visitors. For maximum type-safety, also add a parameter to the output visitor constructors with a type-correct version of the output pointer, and assert that the two uses match. This approach was considered superior to either passing the output parameter only during construction (action at a distance during visit_free() feels awkward) or only during visit_complete() (defeating type safety makes it easier to use incorrectly). Most callers were function-local, and therefore a mechanical conversion; the testsuite was a bit trickier, but the previous cleanup patch minimized the churn here. The visit_complete() function may be called at most once; doing so lets us use transfer semantics rather than duplication or ref-count semantics to get the just-built output back to the caller, even though it means our behavior is not idempotent. Generated code is simplified as follows for events: |@@ -26,7 +26,7 @@ void qapi_event_send_acpi_device_ost(ACP | QDict *qmp; | Error *err = NULL; | QMPEventFuncEmit emit; |- QmpOutputVisitor *qov; |+ QObject *obj; | Visitor *v; | q_obj_ACPI_DEVICE_OST_arg param = { | info |@@ -39,8 +39,7 @@ void qapi_event_send_acpi_device_ost(ACP | | qmp = qmp_event_build_dict("ACPI_DEVICE_OST"); | |- qov = qmp_output_visitor_new(); |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(&obj); | | visit_start_struct(v, "ACPI_DEVICE_OST", NULL, 0, &err); | if (err) { |@@ -55,7 +54,8 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | |- qdict_put_obj(qmp, "data", qmp_output_get_qobject(qov)); |+ visit_complete(v, &obj); |+ qdict_put_obj(qmp, "data", obj); | emit(QAPI_EVENT_ACPI_DEVICE_OST, qmp, &err); and for commands: | { | Error *err = NULL; |- QmpOutputVisitor *qov = qmp_output_visitor_new(); | Visitor *v; | |- v = qmp_output_get_visitor(qov); |+ v = qmp_output_visitor_new(ret_out); | visit_type_AddfdInfo(v, "unused", &ret_in, &err); |- if (err) { |- goto out; |+ if (!err) { |+ visit_complete(v, ret_out); | } |- *ret_out = qmp_output_get_qobject(qov); |- |-out: | error_propagate(errp, err); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-13-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06string-output-visitor: Favor new visit_free() functionEric Blake
Now that we have a polymorphic visit_free(), we no longer need string_output_visitor_cleanup(); however, we still need to expose the subtype for string_output_get_string(). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-9-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-06opts-visitor: Favor new visit_free() functionEric Blake
Now that we have a polymorphic visit_free(), we no longer need opts_visitor_cleanup(); which in turn means we no longer need to return a subtype from opts_visitor_new() nor a public upcast function. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-6-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-27qapi: keep names in 'CpuInstanceProperties' in sync with struct CPUCorePeter Krempa
struct CPUCore uses 'id' suffix in the property name. As docs for query-hotpluggable-cpus state that the cpu core properties should be passed back to device_add by management in case new members are added and thus the names for the fields should be kept in sync. Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> [dwg: Removed a duplicated word in comment] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-17hmp: Add 'info hotpluggable-cpus' HMP commandBharata B Rao
This is the HMP equivalent for QMP query-hotpluggable-cpus. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [dwg: Fixed problem with printf formats on 32-bit host] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-16hmp: acquire aio_context in hmp_qemu_ioVladimir Sementsov-Ogievskiy
Acquire aio context before run command, this is mandatory for unit tests. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Kevin Wolf <kwolf@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-06-16Postcopy: Add stats on page requestsDr. David Alan Gilbert
On the source, add a count of page requests received from the destination. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: define 'tls-creds' and 'tls-hostname' migration parametersDaniel P. Berrange
Define two new migration parameters to be used with TLS encryption. The 'tls-creds' parameter provides the ID of an instance of the 'tls-creds' object type, or rather a subclass such as 'tls-creds-x509'. Providing these credentials will enable use of TLS on the migration data stream. If using x509 certificates, together with a migration URI that does not include a hostname, the 'tls-hostname' parameter provides the hostname to use when verifying the server's x509 certificate. This allows TLS to be used in combination with fd: and exec: protocols where a TCP connection is established by a 3rd party outside of QEMU. NB, this requires changing the migrate_set_parameter method in the HMP to accept a 's' (string) value instead of 'i' (integer). This is backwards compatible, because the parsing of strings allows the quotes to be optional, thus any integer is also a valid string. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1461751518-12128-26-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-26migration: add reporting of errors for outgoing migrationDaniel P. Berrange
Currently if an application initiates an outgoing migration, it may or may not, get an error reported back on failure. If the error occurs synchronously to the 'migrate' command execution, the client app will see the error message. This is the case for DNS lookup failures. If the error occurs asynchronously to the monitor command though, the error will be thrown away and the client left guessing about what went wrong. This is the case for failure to connect to the TCP server (eg due to wrong port, or firewall rules, or other similar errors). In the future we'll be adding more scope for errors to happen asynchronously with the TLS protocol handshake. TLS errors are hard to diagnose even when they are well reported, so discarding errors entirely will make it impossible to debug TLS connection problems. Management apps which do migration are already using 'query-migrate' / 'info migrate' to check up on progress of background migration operations and to see their end status. This is a fine place to also include the error message when things go wrong. This patch thus adds an 'error-desc' field to the MigrationInfo struct, which will be populated when the 'status' is set to 'failed': (qemu) migrate -d tcp:localhost:9001 (qemu) info migrate capabilities: xbzrle: off rdma-pin-all: off auto-converge: off zero-blocks: off compress: off events: off x-postcopy-ram: off Migration status: failed (Error connecting to socket: Connection refused) total time: 0 milliseconds In the HMP, when doing non-detached migration, it is also possible to display this error message directly to the app. (qemu) migrate tcp:localhost:9001 Error connecting to socket: Connection refused Or with QMP { "execute": "query-migrate", "arguments": {} } { "return": { "status": "failed", "error-desc": "address resolution failed for myhost:9000: No address associated with hostname" } } Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <1461751518-12128-11-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-05-23migration: Promote improved autoconverge commands out of experimental stateJason J. Herne
The new autoconverge throttling commands have been tested for a release now. It is time to move them out of the experimental state. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Message-Id: <1461262038-8197-1-git-send-email-jjherne@linux.vnet.ibm.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-18qapi: Don't special-case simple union wrappersEric Blake
Simple unions were carrying a special case that hid their 'data' QMP member from the resulting C struct, via the hack method QAPISchemaObjectTypeVariant.simple_union_type(). But by using the work we started by unboxing flat union and alternate branches, coupled with the ability to visit the members of an implicit type, we can now expose the simple union's implicit type in qapi-types.h: | struct q_obj_ImageInfoSpecificQCow2_wrapper { | ImageInfoSpecificQCow2 *data; | }; | | struct q_obj_ImageInfoSpecificVmdk_wrapper { | ImageInfoSpecificVmdk *data; | }; ... | struct ImageInfoSpecific { | ImageInfoSpecificKind type; | union { /* union tag is @type */ | void *data; |- ImageInfoSpecificQCow2 *qcow2; |- ImageInfoSpecificVmdk *vmdk; |+ q_obj_ImageInfoSpecificQCow2_wrapper qcow2; |+ q_obj_ImageInfoSpecificVmdk_wrapper vmdk; | } u; | }; Doing this removes asymmetry between QAPI's QMP side and its C side (both sides now expose 'data'), and means that the treatment of a simple union as sugar for a flat union is now equivalent in both languages (previously the two approaches used a different layer of dereferencing, where the simple union could be converted to a flat union with equivalent C layout but different {} on the wire, or to an equivalent QMP wire form but with different C representation). Using the implicit type also lets us get rid of the simple_union_type() hack. Of course, now all clients of simple unions have to adjust from using su->u.member to using su->u.member.data; while this touches a number of files in the tree, some earlier cleanup patches helped minimize the change to the initialization of a temporary variable rather than every single member access. The generated qapi-visit.c code is also affected by the layout change: |@@ -7393,10 +7393,10 @@ void visit_type_ImageInfoSpecific_member | } | switch (obj->type) { | case IMAGE_INFO_SPECIFIC_KIND_QCOW2: |- visit_type_ImageInfoSpecificQCow2(v, "data", &obj->u.qcow2, &err); |+ visit_type_q_obj_ImageInfoSpecificQCow2_wrapper_members(v, &obj->u.qcow2, &err); | break; | case IMAGE_INFO_SPECIFIC_KIND_VMDK: |- visit_type_ImageInfoSpecificVmdk(v, "data", &obj->u.vmdk, &err); |+ visit_type_q_obj_ImageInfoSpecificVmdk_wrapper_members(v, &obj->u.vmdk, &err); | break; | default: | abort(); Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1458254921-17042-13-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-25Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Asynchronous dump-guest-memory from Peter * improved logging with -D -daemonize from Dimitris * more address_space_* optimization from Gonglei * TCG xsave/xrstor thinko fix * chardev bugfix and documentation patch # gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: target-i386: fix confusion in xcr0 bit position vs. mask chardev: Properly initialize ChardevCommon components memory: Remove unreachable return statement memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length exec: store RAMBlock pointer into memory region log: Redirect stderr to logfile if deamonized dump-guest-memory: add qmp event DUMP_COMPLETED Dump: add hmp command "info dump" Dump: add qmp command "query-dump" DumpState: adding total_size and written_size fields dump-guest-memory: add "detach" support dump-guest-memory: disable dump when in INMIGRATE state dump-guest-memory: introduce dump_process() helper function. dump-guest-memory: add dump_in_progress() helper function dump-guest-memory: using static DumpState, add DumpStatus dump-guest-memory: add "detach" flag for QMP/HMP interfaces. dump-guest-memory: cleanup: removing dump_{error|cleanup}(). scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)" qemu-options.hx: Improve documentation of chardev multiplexing mode Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-22Dump: add hmp command "info dump"Peter Xu
It will calculate percentage of finished work from completed and total. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1455772616-8668-11-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22dump-guest-memory: add "detach" flag for QMP/HMP interfaces.Peter Xu
This patch only adds the interfaces, but does not implement them. "detach" parameter is made optional, to make sure that all the old dump-guest-memory requests will still be able to work. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-22qapi: Add burst length parameters to block_set_io_throttleAlberto Garcia
This patch adds the new bps_*_max_length and iops_*_max_length parameters to the block_set_io_throttle command. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-19qapi: Don't box branches of flat unionsEric Blake
There's no reason to do two malloc's for a flat union; let's just inline the branch struct directly into the C union branch of the flat union. Surprisingly, fewer clients were actually using explicit references to the branch types in comparison to the number of flat unions thus modified. This lets us reduce the hack in qapi-types:gen_variants() added in the previous patch; we no longer need to distinguish between alternates and flat unions. The change to unboxed structs means that u.data (added in commit cee2dedb) is now coincident with random fields of each branch of the flat union, whereas beforehand it was only coincident with pointers (since all branches of a flat union have to be objects). Note that this was already the case for simple unions - but there we got lucky. Remember, visit_start_union() blindly returns true for all visitors except for the dealloc visitor, where it returns the value !!obj->u.data, and that this result then controls whether to proceed with the visit to the variant. Pre-patch, this meant that flat unions were testing whether the boxed pointer was still NULL, and thereby skipping visit_end_implicit_struct() and avoiding a NULL dereference if the pointer had not been allocated. The same was true for simple unions where the current branch had pointer type, except there we bypassed visit_type_FOO(). But for simple unions where the current branch had scalar type, the contents of that scalar meant that the decision to call visit_type_FOO() was data-dependent - the reason we got lucky there is that visit_type_FOO() for all scalar types in the dealloc visitor is a no-op (only the pointer variants had anything to free), so it did not matter whether the dealloc visit was skipped. But with this patch, we would risk leaking memory if we could skip a call to visit_type_FOO_fields() based solely on a data-dependent decision. But notice: in the dealloc visitor, visit_type_FOO() already handles a NULL obj - it was only the visit_type_implicit_FOO() that was failing to check for NULL. And now that we have refactored things to have the branch be part of the parent struct, we no longer have a separate pointer that can be NULL in the first place. So we can just delete the call to visit_start_union() altogether, and blindly visit the branch type; there is no change in behavior except to the dealloc visitor, where we now unconditionally visit the branch, but where that visit is now always safe (for a flat union, we can no longer dereference NULL, and for a simple union, visit_type_FOO() was already safely handling NULL on pointer types). Unfortunately, simple unions are not as easy to switch to unboxed layout; because we are special-casing the hidden implicit type with a single 'data' member, we really DO need to keep calling another layer of visit_start_struct(), with a second malloc; although there are some cleanups planned for simple unions in later patches. visit_start_union() and gen_visit_implicit_struct() are now unused. Drop them. Note that after this patch, the only remaining use of visit_start_implicit_struct() is for alternate types; the next patch will do further cleanup based on that fact. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1455778109-6278-14-git-send-email-eblake@redhat.com> [Dead code deletion squashed in, commit message updated accordingly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-16nbd: enable use of TLS with nbd-server-start commandDaniel P. Berrange
This modifies the nbd-server-start QMP command so that it is possible to request use of TLS. This is done by adding a new optional parameter "tls-creds" which provides the ID of a previously created QCryptoTLSCreds object instance. TLS is only supported when using an IPv4/IPv6 socket listener. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-17-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-16qom: add helpers for UserCreatable object typesDaniel P. Berrange
The QMP monitor code has two helper methods object_add and qmp_object_del that are called from several places in the code (QMP, HMP and main emulator startup). The HMP and main emulator startup code also share further logic that extracts the qom-type & id values from a qdict. We soon need to use this logic from qemu-img, qemu-io and qemu-nbd too, but don't want those to depend on the monitor, nor do we want to duplicate the code. To avoid this, move some code out of qmp.c and hmp.c adding new methods to qom/object_interfaces.c - user_creatable_add - takes a QDict holding a full object definition & instantiates it - user_creatable_add_type - takes an ID, type name, and QDict holding object properties & instantiates it - user_creatable_add_opts - takes a QemuOpts holding a full object definition & instantiates it - user_creatable_add_opts_foreach - variant on user_creatable_add_opts which can be directly used in conjunction with qemu_opts_foreach. - user_creatable_del - takes an ID and deletes the corresponding object The existing code is updated to use these new methods. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1455129674-17255-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-02-08qapi: Fix compilation failure on MIPS and SPARCEric Blake
Commit 86f4b687 broke compilation on MIPS and SPARC, which have a preprocessor pollution of '#define mips 1' and '#define sparc 1', respectively. Treat it the same way as we do for the pollution with 'unix', so that QMP remains backwards compatible and only the C code needs to use the alternative 'q_mips', 'q_sparc' spelling. CC: James Hogan <james.hogan@imgtec.com> CC: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eric Blake <eblake@redhat.com> Tested-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Drop unused 'kind' for struct/enum visitEric Blake
visit_start_struct() and visit_type_enum() had a 'kind' argument that was usually set to either the stringized version of the corresponding qapi type name, or to NULL (although some clients didn't even get that right). But nothing ever used the argument. It's even hard to argue that it would be useful in a debugger, as a stack backtrace also tells which type is being visited. Therefore, drop the 'kind' argument as dead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com> [Harmless rebase mistake cleaned up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08hmp: Cache use of qapi visitorEric Blake
Cache the visitor in a local variable instead of repeatedly calling the accessor. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-8-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08hmp: Drop pointless allocation during qapi visitEric Blake
The qapi visitor contract allows us to visit a virtual structure, where we don't have any corresponding qapi struct. Most such uses pass NULL for @obj; but these two callers were passing a dummy pointer, which then gets allocated to heap memory but then immediately freed without use. Clean this up to suppress unwanted allocation, like we do elsewhere. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-7-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-04all: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
2016-02-03hmp: fix sendkey out of bounds write (CVE-2015-8619)Wolfgang Bumiller
When processing 'sendkey' command, hmp_sendkey routine null terminates the 'keyname_buf' array. This results in an OOB write issue, if 'keyname_len' was to fall outside of 'keyname_buf' array. Since the keyname's length is known the keyname_buf can be removed altogether by adding a length parameter to index_from_key() and using it for the error output as well. Reported-by: Ling Liu <liuling-it@360.cn> Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Message-Id: <20160113080958.GA18934@olga> [Comparison with "<" dumbed down, test for junk after strtoul() tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-13error: Consistently name Error * objects err, and not errpMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1450452927-8346-25-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-01-13error: Use error_report_err() instead of monitor_printf()Markus Armbruster
Both error_report_err() and monitor_printf() print to the same destination when monitor_printf() is used correctly, i.e. within an HMP monitor. Elsewhere, monitor_printf() does nothing, while error_report_err() reports to stderr. Most changed functions are HMP command handlers. These should only run within an HMP monitor. The one exception is bdrv_password_cb(), which should also only run within an HMP monitor. Four command handlers prefix the error message with the command name: balloon, migrate_set_capability, migrate_set_parameter, migrate. Pointless, drop. Unlike monitor_printf(), error_report_err() uses the error whole instead of just its message obtained with error_get_pretty(). This avoids suppressing its hint (see commit 50b7b00). Example: (qemu) device_add ivshmem,id=666 Parameter 'id' expects an identifier Identifiers consist of letters, digits, '-', '.', '_', starting with a letter. Try "help device_add" for more information The "Identifiers consist of..." line is new with this patch. Coccinelle semantic patch: @@ expression M, E; @@ - monitor_printf(M, "%s\n", error_get_pretty(E)); - error_free(E); + error_report_err(E); @r1@ expression M, E; format F; position p; @@ - monitor_printf(M, "...%@F@\n", error_get_pretty(E));@p - error_free(E); + error_report_err(E); @script:python@ p << r1.p; @@ print "%s:%s:%s: prefix dropped" % (p[0].file, p[0].line, p[0].column) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-4-git-send-email-armbru@redhat.com>
2015-12-17cpu: Convert CpuInfo into flat unionEric Blake
The CpuInfo struct is used only by the 'query-cpus' output command, so we are free to modify it by adding fields (clients are already supposed to ignore unknown output fields), or by changing optional members to mandatory, while still keeping QMP wire compatibility with older versions of qemu. When qapi type CpuInfo was originally created for 0.14, we had no notion of a flat union, and instead just listed a bunch of optional fields with documentation about the mutually-exclusive choice of which instruction pointer field(s) would be provided for a given architecture. But now that we have flat unions and introspection, it is better to segregate off which fields will be provided according to the actual architecture. With this in place, we no longer need the fields to be optional, because the choice of the new 'arch' discriminator serves that role. This has an additional benefit: the old all-in-one struct was the only place in the code base that had a case-sensitive naming of members 'pc' vs. 'PC'. Separating these spellings into different branches of the flat union will allow us to add restrictions against future case-insensitive collisions, since that is generally a poor interface practice. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-25-git-send-email-eblake@redhat.com> [Spelling of CPUInfo{SPARC,PPC,MIPS} fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-12-17qapi: Don't let implicit enum MAX member collideEric Blake
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-12block: Add idle_time_ns to BlockDeviceStatsAlberto Garcia
This patch adds the new field 'idle_time_ns' to the BlockDeviceStats structure, indicating the time that has passed since the previous I/O operation. It also adds the block_acct_idle_time_ns() call, to ensure that all references to the clock type used for accounting are in the same place. This will later allow us to use a different clock for iotests. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 7d8cfcf931453e1a2443e6626e8c1edc347c7c8a.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11hmp: Add read-only-mode option to change commandMax Reitz
Expose the new read-only-mode option of 'blockdev-change-medium' for the 'change' HMP command. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11blockdev: read-only-mode for blockdev-change-mediumMax Reitz
Add an option to qmp_blockdev_change_medium() which allows changing the read-only status of the block device whose medium is changed. Some drives do not have a inherently fixed read-only status; for instance, floppy disks can be set read-only or writable independently of the drive. Some users may find it useful to be able to therefore change the read-only status of a block device when changing the medium. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11hmp: Use blockdev-change-medium for change commandMax Reitz
Use separate code paths for the two overloaded functions of the 'change' HMP command, and invoke the 'blockdev-change-medium' QMP command if used on a block device (by calling qmp_blockdev_change_medium()). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-10migrate_start_postcopy: Command to trigger transition to postcopyDr. David Alan Gilbert
Once postcopy is enabled (with migrate_set_capability), the migration will still start on precopy mode. To cause a transition into postcopy the: migrate_start_postcopy command must be issued. Postcopy will start sometime after this (when it's next checked in the migration loop). Issuing the command before migration has started will error, and issuing after it has finished is ignored. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-02tpm: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for TPM-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-22-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02memory: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for memory-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-21-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02input: Convert to new qapi union layoutEric Blake
We have two issues with our qapi union layout: 1) Even though the QMP wire format spells the tag 'type', the C code spells it 'kind', requiring some hacks in the generator. 2) The C struct uses an anonymous union, which places all tag values in the same namespace as all non-variant members. This leads to spurious collisions if a tag value matches a non-variant member's name. Make the conversion to the new layout for input-related code. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-20-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-11-02qapi: Unbox base membersEric Blake
Rather than storing a base class as a pointer to a box, just store the fields of that base class in the same order, so that a child struct can be directly cast to its parent. This gives less malloc overhead, less pointer dereferencing, and even less generated code. Compare to the earlier commit 1e6c1616a "qapi: Generate a nicer struct for flat unions" (although that patch had fewer places to change, as less of qemu was directly using qapi structs for flat unions). It also allows us to turn on automatic type-safe wrappers for upcasting to the base class of a struct. Changes to the generated code look like this in qapi-types.h: | struct SpiceChannel { |- SpiceBasicInfo *base; |+ /* Members inherited from SpiceBasicInfo: */ |+ char *host; |+ char *port; |+ NetworkAddressFamily family; |+ /* Own members: */ | int64_t connection_id; as well as additional upcast functions like qapi_SpiceChannel_base(). Meanwhile, changes to qapi-visit.c look like: | static void visit_type_SpiceChannel_fields(Visitor *v, SpiceChannel **obj, Error **errp) | { | Error *err = NULL; | |- visit_type_implicit_SpiceBasicInfo(v, &(*obj)->base, &err); |+ visit_type_SpiceBasicInfo_fields(v, (SpiceBasicInfo **)obj, &err); | if (err) { (the cast is necessary, since our upcast wrappers only deal with a single pointer, not pointer-to-pointer); plus the wholesale elimination of some now-unused visit_type_implicit_FOO() functions. Without boxing, the corner case of one empty struct having another empty struct as its base type now requires inserting a dummy member (previously, the 'Base *base' member sufficed). And now that we no longer consume a 'base' member in the generated C struct, we can delete the former negative struct-base-clash-base test. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1445898903-12082-11-git-send-email-eblake@redhat.com> [Commit message tweaked slightly] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-30qmp/hmp: Add throttle ratio to query-migrate and info migrateJason J. Herne
Report throttle percentage in info migrate and query-migrate responses when cpu throttling is active. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-30migration: Parameters for auto-converge cpu throttlingJason J. Herne
Add migration parameters to allow the user to adjust the parameters that control cpu throttling when auto-converge is in effect. The added parameters are as follows: x-cpu-throttle-initial : Initial percantage of time guest cpus are throttled when migration auto-converge is activated. x-cpu-throttle-increment: throttle percantage increase each time auto-converge detects that migration is not making progress. Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2015-09-04hmp: add info iothreads commandTing Wang
Make "info iothreads" available on the HMP monitor. For example, the results are as follows when executing qemu command with "-object iothread,id=iothread-1 -object iothread,id=iothread-2". (qemu) info iothreads iothread-1: thread_id=123 iothread-2: thread_id=456 Signed-off-by: Ting Wang <kathy.wangting@huawei.com> Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 11:02:01 +0000