summaryrefslogtreecommitdiff
path: root/default-configs
AgeCommit message (Collapse)Author
2015-01-26hw: misc, add educational driverJiri Slaby
I am using qemu for teaching the Linux kernel at our university. I wrote a simple PCI device that can answer to writes/reads, generate interrupts and perform DMA. As I am dragging it locally over 2 years, I am sending it to you now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> [Fix 32-bit compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-12s390: Add PCI bus supportFrank Blaschka
This patch implements a pci bus for s390x together with infrastructure to generate and handle hotplug events, to configure/unconfigure via sclp instruction, to do iommu translations and provide s390 support for MSI/MSI-X notification processing. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-15sdhci: Support SDHCI devices on PCIKevin O'Connor
Support for PCI devices following the "SD Host Controller Simplified Specification Version 2.00" spec. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-07mips: Remove CONFIG_VT82C686 from non-Fulong configsMaciej W. Rozycki
Fix the regression introduced with commit 47934d0aadc075b05ce2d9e8a44fa6a46edd1afa [hw: move ISA bridges and devices to hw/isa/, configure with default-configs/], by removing CONFIG_VT82C686 from configurations that previously did not enable it. That southbridge is only available on Fulong platforms (CONFIG_FULONG) that are exclusively little-endian, 64-bit MIPS. Previously vt82c686.o was pulled explicitly with obj-$(CONFIG_FULONG). Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-09-08PPC: Fix default config ordering and add eTSEC for ppc64Alexander Graf
We messed up the ordering in our default configs for PPC. The top entries are generic entries, then come sections that indicate that features are only in because of a special feature (such as PReP). Fix the ordering again and while at it add eTSEC support to the ppc64 target so that we can spawn eTSEC adapters with qemu-system-ppc64. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-09-01target-tricore: Add initialization for translation and activate targetBastian Koppelmann
Add tcg and cpu model initialization. Add gen_intermediate_code function. Activate target in configure and add softmmu config. Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-id: 1409572800-4116-5-git-send-email-kbastian@mail.uni-paderborn.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19pc: implement pc-dimm device abstractionVasilis Liaskovitis
Each hotplug-able memory slot is a PCDIMMDevice. A hot-add operation for a memory device: - creates a new PCDIMMDevice and makes hotplug controller to map it into guest address space Hotplug operations are done through normal device_add commands. For migration case, all hotplugged memory devices on source should be specified on target's command line using '-device' option with properties set to the same values as on source. To simplify review, patch introduces only PCDIMMDevice QOM skeleton that will be extended by following patches to implement actual memory hotplug and related functions. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-16target-ppc: Add a new user mode target for little-endian PPC64.Doug Kwan
Signed-off-by: Doug Kwan <dougkwan@google.com> Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-16target-ppc: Enable Building of libdecnumberTom Musta
Enable compilation of the newly added libdecnumber library code. Object file targets are added to Makefile.target using a newly introduced flag CONFIG_LIBDECNUMBER. The flag is added to the PowerPC targets (ppc[64]-linux-user, ppc[64]-softmmu). Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: add ppcemb and ppc64abi32 config] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-05-20s390x: split flic into kvm and non-kvm partsCornelia Huck
Introduce a common parent class for both cases, where kvm and non-kvm can hook up callbacks. This will be used by follow-on patches for adapter registration and mapping. We now always have a flic, regardless of whether we use kvm; the non-kvm implementation just doesn't do anything. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-04-23usb: mtp filesharingGerd Hoffmann
Implementation of a USB Media Transfer Device device for easy filesharing. Read-only. No access control inside qemu, it will happily export any file it is able to open to the guest, i.e. standard unix access rights for the qemu process apply. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-03-05Add Enhanced Three-Speed Ethernet Controller (eTSEC)Fabien Chouteau
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-04Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' ↵Peter Maydell
into staging Several features, fixes and cleanups for kvm/s390: - sclp event facility: cleanup structure. This allows to use realize/unrealize as well as migration support via vmsd - reboot: Two fixes that make reboot much more reliable - ipl: make elf loading more robust - flic interrupt controller: This allows to migrate floating interrupts, as well as clear them on reset etc. - enable async_pf feature of KVM on s390 - several sclp fixes and cleanups - several sigp fixes and cleanups * remotes/borntraeger/tags/kvm-s390-20140227: (22 commits) s390x/ipl: Fix crash of ELF images with arbitrary entry points s390x/kvm: Rework priv instruction handlers s390x/kvm: Add missing SIGP CPU RESET order s390x/kvm: Rework SIGP INITIAL CPU RESET handler s390x/cpu: Use ioctl to reset state in the kernel s390-ccw.img: new binary rom to match latest fixes s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx s390x/event-facility: exploit realize/unrealize s390x/event-facility: add support for live migration s390x/event-facility: code restructure s390x/event-facility: some renaming s390x/sclp: Fixed setting of condition code register s390x/sclp: Add missing checks to SCLP handler s390x/sclp: Fixed the size of sccb and code parameter s390x/eventfacility: mask out commands s390x/virtio-hcall: Specification exception for illegal subcodes s390x/virtio-hcall: Add range check for hypervisor call s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler s390x/async_pf: Check for apf extension and enable pfault ... Conflicts: linux-headers/linux/kvm.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-27sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROMMark Cave-Ayland
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating systems such as early Solaris that do not have drivers for TCX. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27s390x/kvm: implement floating-interrupt controller deviceJens Freimann
This patch implements a floating-interrupt controller device (flic) which interacts with the s390 flic kvm_device. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-13ppcemb-softmmu: Drop Mac and e500 emulationAndreas Färber
They are still available in ppc-softmmu and ppc64-softmmu. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-13Merge remote-tracking branch 'remotes/afaerber/tags/prep-for-upstream' into ↵Peter Maydell
staging PReP machine and devices * Cleanups for Raven PCI host bridge * Removal of PReP machine and devices from qemu-system-ppcemb # gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/prep-for-upstream: prep: Drop from ppcemb-softmmu raven: Use constant PCI_NUM_PINS instead of 4 prep: Kill get_system_io() usage Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10prep: Drop from ppcemb-softmmuAndreas Färber
ppcemb covers only embedded processors, which does not include PReP. Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-08hw/net: add support for Allwinner EMAC Fast Ethernet controllerBeniamino Galvani
This patch adds support for the Fast Ethernet MAC found on Allwinner SoCs, together with a basic emulation of Realtek RTL8201CP PHY. Since there is no public documentation of the Allwinner controller, the implementation is based on Linux kernel driver. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-01-08default-configs: Add config for aarch64-linux-userPeter Maydell
Add a config for aarch64-linux-user, thereby enabling it as a valid target. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-12-17hw/arm: add allwinner a10 SoC supportliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-5-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/intc: add allwinner A10 interrupt controllerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1387159292-10436-4-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/timer: add allwinner a10 timerliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387159292-10436-3-git-send-email-lig.fnst@cn.fujitsu.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17hw/arm: add very initial support for Canon DIGIC SoCAntony Pavlov
DIGIC is Canon Inc.'s name for a family of SoC for digital cameras and camcorders. There is no publicly available specification for DIGIC chips. All information about DIGIC chip internals is based on reverse engineering efforts made by CHDK (http://chdk.wikia.com) and Magic Lantern (http://www.magiclantern.fm) projects contributors. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17default-configs: Add config for aarch64-softmmuPeter Maydell
Add a config for aarch64-softmmu; this enables building of this target. The resulting executable doesn't know about any 64 bit CPUs, but all the 32 bit CPUs and board models work. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1385645602-18662-8-git-send-email-peter.maydell@linaro.org Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2013-12-10hw/timer: Introduce ARM A9 Global Timer.Peter Crosthwaite
The ARM A9 MPCore has a timer that is global to all cores in the cluster. The timer is shared but each core has a private independent comparator and interrupt. Based on version contributed by Francois LEGAL. Signed-off-by: François LEGAL <devel@thom.fr.eu.org> Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com [PC changes: * New commit message * Re-implemented as single timer model * Fixed backwards counting issue in polled mode * completed VMSD fields * macroified magic numbers (and headerified reg definitions) * split of as device-model-only patch * use bitops for 64 bit register access * Fixed auto increment mode to check condition properly * general cleanup (names/style etc). ] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [PMM: * minor typo fixes * added missing return after error_setg() * dropped setting dc->no_user = 1 ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-11-05arm11mpcore: Split off SCU deviceAndreas Färber
Inspired by a9scu. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-31Merge remote-tracking branch 'agraf/ppc-for-upstream' into stagingAnthony Liguori
* agraf/ppc-for-upstream: (29 commits) spapr: Use DeviceClass::fw_name for device tree CPU node target-ppc: Fill in OpenFirmware names for some PowerPCCPU families target-ppc: dump-guest-memory support dump-guest-memory: Check for the correct return value target-ppc: Use #define for max slb entries target-ppc: Check for error on address translation in memsave command target-ppc: Update slb array with correct index values. spapr-pci: enable irqfd for INTx xics-kvm: enable irqfd for MSI xics: Implement H_XIRR_X xics: Implement H_IPOLL xics-kvm: Support for in-kernel XICS interrupt controller xics: add cpu_setup callback xics: split to xics and xics-common xics: add missing const specifiers to TypeInfo xics: convert init() to realize() xics: add pre_save/post_load dispatchers xics: replace fprintf with error_report spapr: move cpu_setup after kvmppc_set_papr xics: move reset and cpu_setup ... Message-id: 1382736474-32128-1-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
2013-10-31integrator: fix Linux boot failure by emulating dbg regionAlex Bennée
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel as the value returned by unassigned_mem_read returned non-zero and left the kernel looping forever waiting for it to change (see integrator_led_set in the kernel code). Relying on a varying implementation detail is incorrect anyway so this introduces a basic stub of a memory region for the debug/LED section on the integrator board. Signed-off-by: Alex Bennée <alex@bennee.com> Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org [PMM: removed three unused fields from struct IntegratorDebugState] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-10-25xics-kvm: Support for in-kernel XICS interrupt controllerDavid Gibson
Recent (host) kernels support emulating the PAPR defined "XICS" interrupt controller system within KVM. This patch allows qemu to initialize and configure the in-kernel XICS, and keep its state in sync with qemu's XICS state as necessary. This should give considerable performance improvements. e.g. on a simple IPI ping-pong test between hardware threads, using qemu XICS gives us around 5,000 irqs/second, whereas the in-kernel XICS gives us around 70,000 irqs/s on the same hardware configuration. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [Mike Qiu <qiudayu@linux.vnet.ibm.com>: fixed mistype which caused ics_set_kvm_state() to fail] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-10-16default-configs/: CONFIG_GDBSTUB_XML removedÁkos Kovács
Makefile.target: Build gdbstub-xml.o only when TARGET_XML_FILES is not empty. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-20default-configs: Fix A9MP and A15MP config namesPeter Maydell
When individual CONFIG_ switches for the A9MPcore and A15MPcore devices were created, they were inadvertently given incorrect names (CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are "Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is a different (rather older) CPU than the Cortex-A9. Rename the CONFIG_ switches to bring them into line with the source file names and CPU names. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
2013-08-14mips_malta: do not raise exceptions when accessing invalid memoryAurelien Jarno
Since commit c658b94f6e8c206c59d02aa6fbac285b86b53d2c, MIPS raises exceptions when accessing invalid memory. This is not the correct behaviour for MIPS Malta Core LV, as the GT-64120A system controller just ignore undecoded access. This feature is used by the Linux kernel to probe for some devices. Emulate the correct behaviour in QEMU by adding an empty slot covering the entire memory space decoded by the GT-64120A. Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-12pc_sysfw: do not make it a device anymorePaolo Bonzini
Move the code to hw/i386, the sole remaining property is available as !pci_enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com Rebased. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25default-configs/ppc64: add all components of i82378 SuperIO chip used by prepPaolo Bonzini
The device provides an ISA bus so that pseries can also run the endianness test. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-24-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25default-configs: add SuperIO to SH4Paolo Bonzini
The device provides an ISA bus to run the endianness test on. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-23-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25default-configs: add test device to all machines supporting ISAPaolo Bonzini
This will let these machines run an endianness test for ISA I/O port space. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-22-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-25isa_mmio: deletePaolo Bonzini
It is not used anymore. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Message-id: 1374501278-31549-15-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-11pseries: move interrupt controllers to hw/intc/Alexey Kardashevskiy
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-07-04pci: Cleanup configuration for pci-hotplug.cDavid Gibson
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its compilation are misnamed. They're not about PCI hotplug in general, but rather about the pci_add/pci_del interface which are now deprecated in favour of the more general device_add/device_del interface. This patch therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD. CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no particular reason, so we clean that up too. In addition it was included in ppc64-softmmu.mak for which the old hotplug interface was never used and is unsuitable, so we remove that too. Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386. The small piece which wasn't is only called from the pci_add and pci_del hooks in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386. This patch therefore also removes the #ifdef from pci-hotplug-old.c, and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-01kvm/openpic: in-kernel mpic supportScott Wood
Enables support for the in-kernel MPIC that thas been merged into the KVM next branch. This includes irqfd/KVM_IRQ_LINE support from Alex Graf (along with some other improvements). Note from Alex regarding kvm_irqchip_create(): On x86, one would call kvm_irqchip_create() to initialize an in-kernel interrupt controller. That function then goes ahead and initializes global capability variables as well as the default irq routing table. On ppc, we can't call kvm_irqchip_create() because we can have different types of interrupt controllers. So we want to do all the things that function would do for us in the in-kernel device init handler. Signed-off-by: Scott Wood <scottwood@freescale.com> [agraf: squash in kvm_irqchip_commit_routes patch, fix non-kvm build, fix ppcemb] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-06-17NVMe: Initial commit for new storage interfaceKeith Busch
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci storage device. NVMe is an open, industry driven storage specification defining an optimized register and command set designed to deliver the full capabilities of non-volatile memory on PCIe SSDs. Further information may be found on the organizations website at: http://www.nvmexpress.org/ This commit implements the minimum from the specification to work with existing drivers. Cc: Keith Busch <keith.busch@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-14ppc: Remove CONFIG_FDT conditionalsPeter Maydell
Now that we know we're compiling with libfdt we can remove the CONFIG_FDT conditionals. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
2013-05-03audio: Enable all cardsJan Kiszka
...or they will bitrot to death. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Message-id: 5181234A.6060504@web.de Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-01target-i386: Introduce ICC bus/device/bridgeIgor Mammedov
Provides a hotpluggable bus for APIC and CPU. * icc-bridge will serve as a parent for icc-bus and provide mmio mapping services to child icc-devices. * icc-device will replace SysBusDevice as a parent of APIC and IOAPIC devices. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-30introduce a new qom device to deal with panicked eventHu Tao
pvpanic device is used to send guest panic event from guest to qemu. When guest panic happens, pvpanic device driver will write a event number to IO port 0x505(which is the IO port occupied by pvpanic device, by default). On receiving the event, pvpanic device will pause guest cpu(s), and send a qmp event QEVENT_GUEST_PANICKED. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: b66077a40235b3531632a05a6ff373850afc7d2e.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: enable PCI audio cards for all PCI-enabled targetsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-9-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: replace audio card configuration with default-configsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-6-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-22Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
# By Paolo Bonzini (5) and others # Via Paolo Bonzini * bonzini/scsi-next: vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module vhost-scsi: new device supporting the tcm_vhost Linux kernel module virtio: simplify Makefile conditionals virtio-scsi: create VirtIOSCSICommon vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping scsi: VMWare PVSCSI paravirtual device implementation scsi: avoid assertion failure on VERIFY command Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pci: add pci test device This adds a new device that we can use for testing PCI PIO and MMIO, with and without ioeventfd in different configurations. FAST_MMIO will be added if/when kvm supports it. Also included are minor cleanups in kvm APIs that it needs. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin # Via Michael S. Tsirkin * mst/tags/for_anthony: pci: add pci test device kvm: support non datamatch ioeventfd kvm: support any size for pio eventfd kvm: remove unused APIs Message-id: cover.1366272004.git.mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 15:44:50 +0000