summaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)Author
2012-01-06Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
* stefanha/trivial-patches: qemu-nbd: drop loop which can never loop Make python mandatory net/socket.c: Fix fd leak in net_socket_listen_init() error paths gdbstub: Fix fd leak in gdbserver_open() error path configure: Fix test for supported host CPU type configure: CONFIG_QEMU_INTERP_PREFIX only for user mode scsi virtio-blk usb-msd: Clean up device init error messages Strip trailing '\n' from error_report()'s first argument (again) qemu-options.hx: fix tls-channel help text
2012-01-06Make python mandatorySebastian Herbszt
The QEMU build depends on Python so make it an explicit requirement. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-06configure: Fix test for supported host CPU typePeter Maydell
The test for whether the host CPU is supported had several problems: * the attempt to fall back to TCI was done as a duplicate test, very late (so "--cpu foo" would fail early but "--cpu unicore32" would fail late, differently, and after configure had already printed a lot of output) * a number of CPUs only supported as guests were included in the list of CPUs we would accept as valid hosts, which would result in a late compile failure on those systems rather than a configure failure or fallback to TCI * bailing out for an unsupported CPU happened before the main option parsing, so "configure --help" wouldn't work Fix these by folding the setting of ARCH into the first test for supported host CPU, removing spurious guest-only CPU names from it, and moving the "fall back to TCI" code earlier. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-06configure: CONFIG_QEMU_INTERP_PREFIX only for user modeStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-01-04hw/9pfs: File system helper process for qemu 9p proxy FSM. Mohan Kumar
Provide root privilege access to QEMU 9p proxy filesystem using socket communication. Proxy helper is started by root user as: ~ # virtfs-proxy-helper -f|--fd <socket descriptor> -p|--path <path-to-share> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-12-19configure: Improve Xen autodetection for hosts without XenStefan Weil
With this patch, it only takes one test (instead of four) to detect that there is no Xen support at all. For most build hosts, this will reduce the time configure needs. It will also reduce noisy output in config.log. Build hosts with Xen now need up to five (instead of up to four) tests. They get improved diagnostics when Xen support fails. Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warnings in config.log (statement without effect)Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warning in config.log (value was never used)Stefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warning in config.log (undefined NULL)Stefan Weil
Avoid the warning when probing for xfs. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warnings in config.log (uninitialized variable)Stefan Weil
warning: ‘fd’ is used uninitialized in this function warning: ‘id’ is used uninitialized in this function Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warning in config.log (macro redefined)Stefan Weil
warning: "_GNU_SOURCE" redefined The macro is already defined on the command line. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warning in config.log (unused variable)Stefan Weil
warning: unused variable ‘iov’ Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warnings in config.log (null arguments)Stefan Weil
warning: null argument where non-null required (argument 1) warning: null argument where non-null required (argument 3) Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warning in config.log (integer from pointer)Stefan Weil
warning: return makes integer from pointer without a cast v2: Removed type cast. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warnings in config.log (old-style function definition)Stefan Weil
warning: function declaration isn’t a prototype In function ‘foo’: warning: old-style function definition The function name was changed, too, to avoid an additional warning. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-19configure: Fix compiler warnings in config.log (always return a value from main)Stefan Weil
Fix several "warning: control reaches end of non-void function". Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-14Merge remote-tracking branch 'stefanha/trivial-patches-next' into stagingAnthony Liguori
2011-12-12Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
2011-12-10w32: QEMU applications with SDL are always GUI applicationsStefan Weil
Since commit 1d14ffa97eacd3cb722271eaf6f093038396eac4 (in 2005), QEMU applications on W32 don't use the default SDL compiler flags: Instead of a GUI application, a console application is created. This has disadvantages (there is always an empty console window) and no obvious reason, so this patch removes the strange flag modification. The SDL GUI applications still can be run from a console window and even send stdout and stderr to that console by setting environment variable SDL_STDIO_REDIRECT=no. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-12-10configure: Enable build by default PIE / read-only relocation sections on ↵Brad
OpenBSD amd64/i386. Enable build by default PIE / read-only relocation sections for the QEMU binaries on OpenBSD amd64/i386. Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-12-06Introduce test-qmp-input-visitorLuiz Capitulino
Contains unit-tests for the QMP input visitor implementation. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06Introduce test-qmp-output-visitorLuiz Capitulino
Contains unit-tests for the QMP output visitor implementation. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06configure: Don't mix glib and libcheck testsLuiz Capitulino
test-coroutine is listed as a libcheck test in the 'checks' variable. This is not right because 'make check' won't run test-coroutine if libcheck tests are not enabled (either because libcheck isn't detected or because --disable-check-utests is passed). Tests using the glib test framework are independent from libcheck and afaik are always present (although having a configure switch to disable them is probably worth it). Untangle test-coroutine from the libcheck tests by introducing the 'test_progs' variable and using it to generate the test list used by 'make check'. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06configure: Pull linux-headers/asm symlink creation out of loopPeter Maydell
Pull the creation of the linux-headers/asm symlink out of the loop so we don't pointlessly delete and recreate it once for each target. Also move the setting of the includes variable up so that it is in the same place as the other code which sets this variable. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06configure: Print a banner comment at the top of config.logPeter Maydell
Print a banner comment at the top of config.log identifying when configure was run and the arguments used. This is occasionally useful for debugging purposes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06configure: Include #define name in check_define compiler errorPeter Maydell
Include the name of the #define being tested for in the compiler error produced when a check_define test is run and fails. This appears only in the config.log, but it does make it a little easier to debug problems by inspecting config.log. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-05configure: Drop armv4l/armv4b distinction in $cpuPeter Maydell
Drop the distinction between armv4l/armv4b in the $cpu variable (ie host cpu type) in favour of calling everything 'arm'. This makes it the same as the ARCH setting and removes some special casing. The only thing we were using the distinction for was to decide which endianness to use in cross compilation; do a cpp define check there instead. Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-11-28configure: avoid screening of --{en, dis}able-usb-redir optionsMax Filippov
--*dir) option pattern precede --{en,dis}able-usb-redir) patterns in the option analysis switch, making the latter options have no effect. There were some --*dir that are supported by Autoconf and not by QEMU configure. The aim was to let QEMU packagers use the rpm (or similar) macro that overrides directories for their distribution. Replace --*dir with exact option names. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-28configure: tighten pie toolchain support test for tls variablesAvi Kivity
Some toolchains don't support pie properly when tls variables are in use. Disallow pie when such toolchains are detected. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-21configure: check for EFD_NONBLOCK | EFD_CLOEXEC flagsMax Filippov
Add check for the EFD_NONBLOCK and EFD_CLOEXEC flags to the CONFIG_EVENTFD test. This fixes the following build failure on Fedora 9: CC event_notifier.o event_notifier.c: In function `event_notifier_init': event_notifier.c:21: error: `EFD_NONBLOCK' undeclared (first use in this function) event_notifier.c:21: error: (Each undeclared identifier is reported only once event_notifier.c:21: error: for each function it appears in.) event_notifier.c:21: error: `EFD_CLOEXEC' undeclared (first use in this function) make: *** [event_notifier.o] Error 1 Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-21configure: build position independent executables on x86-Linux hostsAvi Kivity
Change the default on x86 Linux hosts to building PIE (position independent executables); instead of restricting the option to user-only targets, apply it to all targets. In addition, set the relocation sections to read-only (relro) when available; this reduces the attack surface by disallowing changes to relocation tables at runtime. While PIE reduces performance and relro increases load time, it greatly improves security, with the potential to reduce a code execution vulnerability to a self denial of service. Non-x86 are not changed, as they require TCG changes; neither are non-Linux, due to lack of test coverage. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-11configure: Do not use 'sed -i'Pavel Borzenkov
'sed -i' is not defined in POSIX. It doesn't work on Mac OS X the way it's used in configure (without suffix argument). This patch implements Peter Maydell's idea of xattr.h detection. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Pavel Borzenkov <pavel.borzenkov@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-10configure: Show --cpu option on the help list陳韋任
Signed-off-by: Chen Wen-Ren (陳韋任) <chenwj@iis.sinica.edu.tw> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-09configure: fix detection for xattr.h on modern distributionsAvi Kivity
Modern distributions place xattr.h in /usr/include/sys, and fold libattr.so into libc. They also don't have an ENOATTR. Make configure detect this, and add a qemu-xattr.h file that directs the #include to the right place. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-02Merge branch 'tci' of git://qemu.weilnetz.de/qemuBlue Swirl
* 'tci' of git://qemu.weilnetz.de/qemu: tcg: Add tcg interpreter to configure / make tcg: Add tci disassembler tcg: Add interpreter for bytecode tcg: Add bytecode generator for tcg interpreter tcg: Make ARRAY_SIZE(tcg_op_defs) globally available tcg: TCG targets may define tcg_qemu_tb_exec
2011-11-01configure: Suppress messages from pkg_config probe for checkPeter Maydell
Suppress confusing messages from pkg_config when probing for 'check' by sending them to /dev/null as we do with other similar probes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01Revert "PPC: Fail configure when libfdt is not available"Blue Swirl
This reverts commit f90a9d02401eeeec18a122b61ccccb91244f321c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-11-01Merge branch 'ppc-next' of git://repo.or.cz/qemu/agrafBlue Swirl
* 'ppc-next' of git://repo.or.cz/qemu/agraf: (24 commits) pseries: Add partial support for PCI ppc: Alter CPU state to mask out TCG unimplemented instructions as appropriate pseries: Allow writes to KVM accelerated TCE table KVM: PPC: Override host vmx/vsx/dfp only when information known ppc: Fix up usermode only builds pseries: Correct vmx/dfp handling in both KVM and TCG cases PPC: Fail configure when libfdt is not available ppc: Avoid decrementer related kvm exits PPC: Disable non-440 CPUs for ppcemb target PPC: Bump qemu-system-ppc to 64-bit physical address space pseries: Under kvm use guest cpu = host cpu by default ppc: Add cpu defs for POWER7 revisions 2.1 and 2.3 ppc: First cut implementation of -cpu host ppc: Remove broken partial PVR matching pseries: Update SLOF firmware image pseries: Add device tree properties for VMX/VSX and DFP under kvm ppc: Generalize the kvmppc_get_clockfreq() function Set an invalid-bits mask for each SPE instructions pseries: Update SLOF firmware image pseries: Use Book3S-HV TCE acceleration capabilities ...
2011-11-01add test-coroutine to checksGerd Hoffmann
There is a "test-coroutine" which isn't in the list. Add it so "make check" runs it too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01move checks to separate variableGerd Hoffmann
Create a new CHECKS variable. Put the checks there instead of adding them to the TOOLS variable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-11-01Probe for libcheck by default.Gerd Hoffmann
Probe for libcheck and build checks (if found) by default. Can be explicitly disabled using --disable-check-utests. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-31tcg: Add tcg interpreter to configure / makeStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de>
2011-10-31Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
Conflicts: block/vmdk.c
2011-10-31configure: Update configure so that open_by_handle_at check returns correct ↵Aneesh Kumar K.V
value According to David Gibson for some compiler/libc combinations, open_by_handle_at test in configure isn't quite right: because the file_handle pointer is never dereferenced, gcc doesn't complain even if it is undefined. Change the test as suggested by him. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-30PPC: Fail configure when libfdt is not availableAlexander Graf
We have several targets in the PPC tree now that basically require libfdt to function properly, namely the pseries and the e500 targets. This dependency will rather increase than decrease in the future, so I want to make sure that people building shiny new 1.0 actually have libfdt installed to get rid of a few ifdefs in the code. Warning: This patch will likely make configure fail for people who don't select their own --target-list, but don't have libfdt development packages installed. However, we really need this new dependency to move on. Signed-off-by: Alexander Graf <agraf@suse.de> --- v1 -> v2: - no paranthesis - no fdt check for config_pseries - add . in error message
2011-10-30PPC: Bump qemu-system-ppc to 64-bit physical address spaceAlexander Graf
Some 32-bit PPC CPUs can use up to 36 bit of physical address space. Treat them accordingly in the qemu-system-ppc binary type. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-28iSCSI block driverRonnie Sahlberg
This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-15hw/9pfs: Add st_gen support in getattr replyHarsh Prateek Bora
This patch use file system specific ioctl for getting i_generation value. Not all file system support the ioctl. So we add an export specific extended operation and assign right callback for the file system that support i_generation ioctl ["M. Mohan Kumar" <mohan@in.ibm.com> we can do ioctl only for regular files and directories on the server] Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-15hw/9pfs: Fix build error on platform that don't support futimensAneesh Kumar K.V
Also don't do glibc version check to find handle support. Instead do handle syscall support in configure. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2011-10-08target-alpha: Add custom PALcode image for CLIPPER emulation.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 10:12:43 +0000