summaryrefslogtreecommitdiff
path: root/blockdev.c
AgeCommit message (Collapse)Author
2014-09-25block: Catch simultaneous usage of options and their aliasesKevin Wolf
While thinking about precedence of conflicting block device options from different sources, I noticed that you can specify both an option and its legacy alias at the same time (e.g. readonly=on,read-only=off). Rather than specifying the order of precedence, we should simply forbid such combinations. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-09-25block: Specify -drive legacy option aliases in arrayKevin Wolf
Instead of a series of qemu_opt_rename() calls, use an array that contains all of the renames and call qemu_opt_rename() in a loop. This will keep the code readable even when we add an error return to qemu_opt_rename(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-09-25block: Keep DriveInfo alive until BlockDriverState diesMarkus Armbruster
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not the BDS. This can happen in three places: * Device model destruction during unplug: blockdev_auto_del() * Xen IDE unplug: pci_piix3_xen_ide_unplug() * drive_del command when no device model is attached: do_drive_del() The other callers of drive_del are on error paths where refcnt == 1. If the user somehow manages to plug in a device model using a BDS that has gone through drive_del(), the legacy configuration passed in DriveInfo doesn't reach the device model, and automatic deletion on unplug doesn't work. Worse, some device models such as scsi-disk crash when DriveInfo doesn't exist. This is theoretical; I didn't research an actual reproducer. The problem was introduced when we replaced DriveInfo reference counting by BDS reference counting in commit a94a3fa..fa510eb. Fix by keeping DriveInfo alive until its BDS dies. This affects qemu_drive_opts: now you can't reuse the same ID for new drive options until the BDS dies. Before, you could, but since the code always attempts to create a BDS with the same ID next, the enclosing operation "create a new drive" failed anyway. Different error path, same result. Unfortunately, the fix involves use of blockdev.c stuff from block.c, which is a layering violation. Fortunately, my forthcoming BlockBackend work will get rid of it again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25blockdev: Disentangle BlockDriverState and DriveInfo creationMarkus Armbruster
blockdev_init() mixes up BlockDriverState and DriveInfo initialization Finish the BlockDriverState job before starting to mess with DriveInfo. Easier on the eyes. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-11blockdev: Refuse to drive_del something added with blockdev-addMarkus Armbruster
For some device models, the guest can prevent unplug. Some users need a way to forcibly revoke device model access to the block backend then, so the underlying images can be safely used for something else. drive_del lets you do that. Unfortunately, it conflates revoking access with destroying the backend. Commit 9063f81 made drive_del immediately destroy the root BDS. Nice: the device name becomes available for reuse immediately. Not so nice: the device model's pointer to the root BDS dangles, and we're prone to crash when the memory gets reused. Commit d22b2f4 fixed that by hiding the root BDS instead of destroying it. Destruction only happens on unplug. "Hiding" means removing it from bdrv_states and graph_bdrv_states; see bdrv_make_anon(). This "destroy on revoke" is a misfeature we don't want to carry forward to blockdev-add, just like "destroy on unplug" (commit 2d246f0). So make drive_del fail on anything added with blockdev-add. We'll add separate QMP commands to revoke device model access and to destroy backends. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-08rename parse_enum_option to qapi_enum_parse and make it publicPeter Lieven
relaxing the license to LGPLv2+ is intentional. Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit.canet@nodalink.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-29block: acquire AioContext in do_drive_del()Stefan Hajnoczi
Make drive_del safe for dataplane where another thread may be running the BlockDriverState's AioContext. Note the assumption that AioContext's lifetime exceeds DriveInfo and BlockDriverState. We release AioContext after DriveInfo and BlockDriverState are potentially freed. This is clearly safe with the global AioContext but also with -object iothread and implicit iothreads created by -device virtio-blk-pci,x-data-plane=on (their lifetime is tied to DeviceState, not BlockDriverState). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-29blockdev: fix drive-mirror 'granularity' error messageStefan Hajnoczi
Name the 'granularity' parameter and give its expected value range. Previously the device name was mistakenly reported as the parameter name. Note that the error class is unchanged from ERROR_CLASS_GENERIC_ERROR. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com>
2014-08-20block: acquire AioContext in qmp_block_resize()Stefan Hajnoczi
Make block_resize safe for dataplane where another thread may be running the BlockDriverState's AioContext. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-20block: Use g_new() & friends where that makes obvious senseMarkus Armbruster
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer, for two reasons. One, it catches multiplication overflowing size_t. Two, it returns T * rather than void *, which lets the compiler catch more type errors. Patch created with Coccinelle, with two manual changes on top: * Add const to bdrv_iterate_format() to keep the types straight * Convert the allocation in bdrv_drop_intermediate(), which Coccinelle inexplicably misses Coccinelle semantic patch: @@ type T; @@ -g_malloc(sizeof(T)) +g_new(T, 1) @@ type T; @@ -g_try_malloc(sizeof(T)) +g_try_new(T, 1) @@ type T; @@ -g_malloc0(sizeof(T)) +g_new0(T, 1) @@ type T; @@ -g_try_malloc0(sizeof(T)) +g_try_new0(T, 1) @@ type T; expression n; @@ -g_malloc(sizeof(T) * (n)) +g_new(T, n) @@ type T; expression n; @@ -g_try_malloc(sizeof(T) * (n)) +g_try_new(T, n) @@ type T; expression n; @@ -g_malloc0(sizeof(T) * (n)) +g_new0(T, n) @@ type T; expression n; @@ -g_try_malloc0(sizeof(T) * (n)) +g_try_new0(T, n) @@ type T; expression p, n; @@ -g_realloc(p, sizeof(T) * (n)) +g_renew(T, p, n) @@ type T; expression p, n; @@ -g_try_realloc(p, sizeof(T) * (n)) +g_try_renew(T, p, n) Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-07-01block: add backing-file option to block-streamJeff Cody
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block job. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-stream api, the user is able to change the backing file of the active layer as part of the block-stream operation. This allows the change to be 'safe', in the sense that if the attempt to write the active image metadata fails, then the block-stream operation returns failure, without disrupting the guest. If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: extend block-commit to accept a string for the backing fileJeff Cody
On some image chains, QEMU may not always be able to resolve the filenames properly, when updating the backing file of an image after a block commit. For instance, certain relative pathnames may fail, or drives may have been specified originally by file descriptor (e.g. /dev/fd/???), or a relative protocol pathname may have been used. In these instances, QEMU may lack the information to be able to make the correct choice, but the user or management layer most likely does have that knowledge. With this extension to the block-commit api, the user is able to change the backing file of the overlay image as part of the block-commit operation. This allows the change to be 'safe', in the sense that if the attempt to write the overlay image metadata fails, then the block-commit operation returns failure, without disrupting the guest. If the commit top is the active layer, then specifying the backing file string will be treated as an error (there is no overlay image to modify in that case). If a backing file string is not specified in the command, the backing file string to use is determined in the same manner as it was previously. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: add QAPI command to allow live backing file changeJeff Cody
This allows a user to make a live change to the backing file recorded in an open image. The image file to modify can be specified 2 ways: 1) image filename 2) image node-name Note: this does not cause the backing file itself to be reopened; it merely changes the backing filename in the image file structure, and in internal BDS structures. It is the responsibility of the user to pass a filename string that can be resolved when the image chain is reopened, and the filename string is not validated. A good analogy for this command is that it is a live version of 'qemu-img rebase -u', with respect to changing the backing file string. [Jeff is offline so I respun this patch in his absence. Dropped image filename since using node-name is preferred and this is a new command. No need to introduce the limitations of finding images by filename. --Stefan] Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-07-01block: make 'top' argument to block-commit optionalJeff Cody
Now that active layer block-commit is supported, the 'top' argument no longer needs to be mandatory. Change it to optional, with the default being the active layer in the device chain. [kwolf: Rebased and resolved conflict in tests/qemu-iotests/040] Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-27block: Add replaces argument to drive-mirrorBenoît Canet
drive-mirror will bdrv_swap the new BDS named node-name with the one pointed by replaces when the mirroring is finished. Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27block: Add node-name argument to drive-mirrorBenoît Canet
This new argument can be used to specify the node-name of the new mirrored BDS. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-27block: check for RESIZE blocker in the QMP command, not bdrv_truncate()Jeff Cody
If we check for the RESIZE blocker in bdrv_truncate(), that means a commit will fail if the overlay layer is larger than the base, due to the backing blocker. This is a regression in behavior from 2.0; currently, commit will try to grow the size of the base image to match the overlay size, if the overlay size is larger. By moving this into the QMP command qmp_block_resize(), it allows usage of bdrv_truncate() within block jobs. Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-06-23qapi event: convert other BLOCK_JOB eventsWenchao Xia
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are related, convert them in one patch. The block_job_event_* functions are used to keep encapsulation of BlockJob structure. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-16blockdev: Remove unused DriveInfo reference countMarkus Armbruster
It's always one since commit fa510eb dropped the last drive_get_ref(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16blockdev: Rename drive_init(), drive_uninit() to drive_new(), drive_del()Markus Armbruster
"Init" and "uninit" suggest the functions don't allocate / free storage. But they do. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-16blockdev: Move 'serial' option to drive_init()Kevin Wolf
It is not available with blockdev-add. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-04blockdev: acquire AioContext in block_set_io_throttleStefan Hajnoczi
The block_set_io_throttle QMP and HMP commands modify I/O throttling limits for block devices. Acquire the BlockDriverState's AioContext to protect against race conditions with an IOThread that is running I/O for this device. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-05-30blockdev: Plug memory leak in drive_init()Markus Armbruster
bs_opts is leaked on all paths from its qdev_new() that don't got through blockdev_init(). Add the missing QDECREF(), and zap bs_opts after blockdev_init(), so the new QDECREF() does nothing when we go through blockdev_init(). Leak introduced in commit f298d07. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-30blockdev: Plug memory leak in blockdev_init()Markus Armbruster
blockdev_init() leaks bs_opts when qemu_opts_create() fails, i.e. when the ID is bad. Missed in commit ec9c10d. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-28blockdev: Don't use qerror_report() in do_drive_del()Markus Armbruster
qerror_report() is a transitional interface to help with converting existing HMP commands to QMP. It should not be used elsewhere. do_drive_del() is an HMP command that won't be converted to QMP (we'll create a new QMP command instead). It uses both qerror_report() and error_report(). Convert the former to the latter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28blockdev: Don't use qerror_report_err() in drive_init()Markus Armbruster
qerror_report_err() is a transitional interface to help with converting existing HMP commands to QMP. It should not be used elsewhere. drive_init() is not meant to be used by QMP commands. It uses both qerror_report_err() and error_report(). Convert the former to the latter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28block: Move op_blocker check from block_job_create to its callerFam Zheng
It makes no sense to check for "any" blocker on bs, we are here only because of the mechanical conversion from in_use to op_blockers. Remove it now, and let the callers check specific operation types. Backup and mirror already have it, add checker to stream and commit. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-28block: Replace in_use with operation blockerFam Zheng
This drops BlockDriverState.in_use with op_blockers: - Call bdrv_op_block_all in place of bdrv_set_in_use(bs, 1). - Call bdrv_op_unblock_all in place of bdrv_set_in_use(bs, 0). - Check bdrv_op_is_blocked() in place of bdrv_in_use(bs). The specific types are used, e.g. in place of starting block backup, bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_BACKUP, ...). There is one exception in block_job_create, where bdrv_op_blocker_is_empty() is used, because we don't know the operation type here. This doesn't matter because in a few commits away we will drop the check and move it to callers that _do_ know the type. - Check bdrv_op_blocker_is_empty() in place of assert(!bs->in_use). Note: there is only bdrv_op_block_all and bdrv_op_unblock_all callers at this moment. So although the checks are specific to op types, this changes can still be seen as identical logic with previously with in_use. The difference is error message are improved because of blocker error info. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-05-19block: optimize zero writes with bdrv_write_zeroesPeter Lieven
this patch tries to optimize zero write requests by automatically using bdrv_write_zeroes if it is supported by the format. This significantly speeds up file system initialization and should speed zero write test used to test backend storage performance. I ran the following 2 tests on my internal SSD with a 50G QCOW2 container and on an attached iSCSI storage. a) mkfs.ext4 -E lazy_itable_init=0,lazy_journal_init=0 /dev/vdX QCOW2 [off] [on] [unmap] ----- runtime: 14secs 1.1secs 1.1secs filesize: 937M 18M 18M iSCSI [off] [on] [unmap] ---- runtime: 9.3s 0.9s 0.9s b) dd if=/dev/zero of=/dev/vdX bs=1M oflag=direct QCOW2 [off] [on] [unmap] ----- runtime: 246secs 18secs 18secs filesize: 51G 192K 192K throughput: 203M/s 2.3G/s 2.3G/s iSCSI* [off] [on] [unmap] ---- runtime: 8mins 45secs 33secs throughput: 106M/s 1.2G/s 1.6G/s allocated: 100% 100% 0% * The storage was connected via an 1Gbit interface. It seems to internally handle writing zeroes via WRITESAME16 very fast. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-05-19blockdev: add a function to parse enum ids from stringsPeter Lieven
this adds a generic function to recover the enum id of a parameter given as a string. Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-04-28Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: monitor: fix qmp_getfd() fd leak in error case HMP: support specifying dump format for dump-guest-memory HMP: fix doc of dump-guest-memory qmp: object-add: Validate class before creating object monitor: Add device_add and device_del completion. monitor: Add command_completion callback to mon_cmd_t. monitor: Fix drive_del id argument type completion. error: Remove some unused headers qerror.h: Replace QERR_NOT_SUPPORTED with QERR_UNSUPPORTED qerror.h: Remove QERR defines that are only used once qerror.h: Remove unused error classes error: Print error_report() to stderr if using qmp monitor: Remove unused monitor_print_filename error: Privatize error_print_loc vnc: Remove default_mon usage slirp: Remove default_mon usage Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-25blockdev: Clean up fragile use of error_is_set()Markus Armbruster
Using error_is_set(ERRP) to find out whether a function failed is either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP may be null, because errors go undetected when it is. It's fragile when proving ERRP non-null involves a non-local argument. Else, it's unnecessarily opaque (see commit 84d18f0). The error_is_set(errp) in internal_snapshot_prepare() is merely fragile, because the caller never passes a null errp argument. Make the code more robust and more obviously correct: receive the error in a local variable, then propagate it through the parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-04-25qerror.h: Remove QERR defines that are only used onceCole Robinson
Just hardcode them in the callers Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-22block: Catch duplicate IDs in bdrv_new()Kevin Wolf
Since commit f298d071, block devices added with blockdev-add don't have a QemuOpts around in dinfo->opts. Consequently, we can't rely any more on QemuOpts catching duplicate IDs for block devices. This patch adds a new check for duplicate IDs to bdrv_new(), and moves the existing check that the ID isn't already taken for a node-name there as well. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-22block: Add errp to bdrv_new()Kevin Wolf
This patch adds an errp parameter to bdrv_new() and updates all its callers. The next patches will make use of this in order to check for duplicate IDs. Most of the callers know that their ID is fine, so they can simply assert that there is no error. Behaviour doesn't change with this patch yet as bdrv_new() doesn't actually assign errors to errp. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-04-11block-commit: speed is an optional parameterMax Reitz
As speed is an optional parameter for the QMP block-commit command, it should be set to 0 if not given (as it is undefined if has_speed is false), that is, the speed should not be limited. Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-03-06blockdev: Fix NULL pointer dereference in blockdev-addKevin Wolf
If aio=native, we check that cache.direct is set as well. If however cache wasn't specified at all, qemu just segfaulted. The old condition didn't make any sense anyway because it effectively only checked for the default cache mode case, but not for an explicitly set cache.direct=off mode. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-03-06blockdev: Fail blockdev-add with encrypted imagesKevin Wolf
Encrypted images need a password before they can be used, and we don't want blockdev-add to create BDSes that aren't fully initialised. So for now simply forbid encrypted images; we can come back to it later if we need the functionality. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-02-21block: Add reference parameter to bdrv_open()Max Reitz
Allow bdrv_open() to handle references to existing block devices just as bdrv_file_open() is already capable of. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-21block: Change BDS parameter of bdrv_open() to **Max Reitz
Make bdrv_open() take a pointer to a BDS pointer, similarly to bdrv_file_open(). If a pointer to a NULL pointer is given, bdrv_open() will create a new BDS with an empty name; if the BDS pointer is not NULL, that existing BDS will be reused (in the same way as bdrv_open() already did). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-02-20Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' ↵Peter Maydell
into staging QOM infrastructure fixes and device conversions * QTest cleanups and test cases for PCI NICs * NAND fix for "info qtree" * Cleanup and extension of QOM machine tests * IndustryPack test cases and conversion to QOM realize * I2C cleanups * Cleanups of legacy qdev properties # gpg: Signature made Mon 17 Feb 2014 22:15:37 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/qom-devices-for-peter: (49 commits) qtest: Include system headers before user headers qapi: Refine human printing of sizes qdev: Use QAPI type names for properties qdev: Add enum property types to QAPI schema block: Handle "rechs" and "large" translation options qdev: Remove hex8/32/64 property types qdev: Remove most legacy printers qdev: Use human mode in "info qtree" qapi: Add human mode to StringOutputVisitor qdev: Inline qdev_prop_parse() qdev: Legacy properties are just strings qdev: Legacy properties are now read-only qdev: Remove legacy parsers for hex8/32/64 qdev: Sizes are now parsed by StringInputVisitor qapi: Add size parser to StringInputVisitor qtest: Don't segfault with invalid -qtest option ipack: Move IndustryPack out of hw/char/ ipoctal232: QOM parent field cleanup ipack: QOM parent field cleanup for IPackDevice ipack: QOM parent field cleanup for IPackBus ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-20Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: monitor: Add object_add class argument completion. monitor: Add object_del id argument completion. monitor: Add device_add device argument completion. monitor: Add device_del id argument completion. qmp: expose list of supported character device backends Use error_is_set() only when necessary QMP: allow JSON dict arguments in qmp-shell hmp: migrate command (without -d) now blocks correctly Conflicts: blockdev.c [PMM: resolved trivial conflict in blockdev.c] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-02-14block: Handle "rechs" and "large" translation optionsPaolo Bonzini
Sure, CHS translation is an obscure topic, and legacy options for hard-disk geometries are obscure as well. But since QEMU does nothing with it except telling the BIOS, and since there "large" and "rechs" are listed in the enums, parsing them seems to be the bare minimum. Acked-by: Stefan Hajnoczi <stefanha@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-14block: Open by reference will try device then node_name.Benoît Canet
Since we introduced node_name for named bs of the graph modify the opening by reference to use it as a fallback. This patch also enforce the separation of the device id and graph node namespaces. Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14blockdev: Fix wrong usage of QDECREF causing snapshoted quorum to crash on ↵Benoît Canet
close. As bdrv_open() documentation states: "The reference to the QDict belongs to the block layer * after the call (even on failure), so if the caller intends to reuse the * dictionary, it needs to use QINCREF() before calling bdrv_open." the optional options dict will not be reused after bdrv_open() and should belong to the block layer so remove the extra QDECREF(options). Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-02-14blockdev: Remove 'type' parameter from blockdev_init()Kevin Wolf
blockdev-add doesn't know about the device that the backend will be attached to, this is a legacy -drive concept. Move the remaining checks that use it to drive_init(). [Fam Zheng <famz@redhat.com> suggested line-wrapping to 80 chars as required by the coding standard. I have fixed this. --Stefan] Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-01-24qmp: Allow to take external snapshots on bs graphs node.Benoît Canet
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24qmp: Allow block_resize to manipulate bs graph nodes.Benoît Canet
Signed-off-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24block: Create authorizations mechanism for external snapshot and resize.Benoît Canet
Signed-off-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 18:55:20 +0000