| Age | Commit message (Collapse) | Author |
|---|
|
'remotes/huth-gitlab/tags/pull-request-2019-08-17' into staging
- Run the iotest during "make check"
# gpg: Signature made Sat 17 Aug 2019 09:46:13 BST
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2019-08-17:
gitlab-ci: Remove qcow2 tests that are handled by "make check" already
tests: Run the iotests during "make check" again
block: fix NetBSD qemu-iotests failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Opening a block device on NetBSD has an additional step compared to other OSes,
corresponding to raw_normalize_devicepath. The error message in that function
is slightly different from that in raw_open_common and this was causing spurious
failures in qemu-iotests. However, in general it is not important to know what
exact step was failing, for example in the qemu-iotests case the error message
contains the fairly unequivocal "No such file or directory" text from strerror.
We can thus fix the failures by standardizing on a single error message for
both raw_open_common and raw_normalize_devicepath; in fact, we can even
use error_setg_file_open to make sure the error message is the same as in
the rest of QEMU.
Message-Id: <20190725095920.28419-1-pbonzini@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
write flags are constant, let's store it in BackupBlockJob instead of
recalculating. It also makes two boolean fields to be unused, so,
drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-4-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We have detect_zeroes option, so at least for blockdev-backup user
should define it if zero-detection is needed. For drive-backup leave
detection enabled by default but do it through existing option instead
of open-coding.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730163251.755248-2-vsementsov@virtuozzo.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Let's add a possibility to query dirty-bitmaps not only on root nodes.
It is useful when dealing both with snapshots and incremental backups.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190717173937.18747-1-jsnow@redhat.com
[Added deprecation information. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
[Fixed spelling --js]
|
|
Accept bitmaps and sync policies for the other backup modes.
This allows us to do things like create a bitmap synced to a full backup
without a transaction, or start a resumable backup process.
Some combinations don't make sense, though:
- NEVER policy combined with any non-BITMAP mode doesn't do anything,
because the bitmap isn't used for input or output.
It's harmless, but is almost certainly never what the user wanted.
- sync=NONE is more questionable. It can't use on-success because this
job never completes with success anyway, and the resulting artifact
of 'always' is suspect: because we start with a full bitmap and only
copy out segments that get written to, the final output bitmap will
always be ... a fully set bitmap.
Maybe there's contexts in which bitmaps make sense for sync=none,
but not without more severe changes to the current job, and omitting
it here doesn't prevent us from adding it later.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Presently, If sync=TOP is selected, we mark the entire bitmap as dirty.
In the write notifier handler, we dutifully copy out such regions.
Fix this in three parts:
1. Mark the bitmap as being initialized before the first yield.
2. After the first yield but before the backup loop, interrogate the
allocation status asynchronously and initialize the bitmap.
3. Teach the write notifier to interrogate allocation status if it is
invoked during bitmap initialization.
As an effect of this patch, the job progress for TOP backups
now behaves like this:
- total progress starts at bdrv_length.
- As allocation status is interrogated, total progress decreases.
- As blocks are copied, current progress increases.
Taken together, the floor and ceiling move to meet each other.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20190716000117.25219-10-jsnow@redhat.com
[Remove ret = -ECANCELED change. --js]
[Squash in conflict resolution based on Max's patch --js]
Message-id: c8b0ab36-79c8-0b4b-3193-4e12ed8c848b@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Modify bdrv_is_unallocated_range to utilize the pnum return from
bdrv_is_allocated, and in the process change the semantics from
"is unallocated" to "is allocated."
Optionally returns a full number of clusters that share the same
allocation status.
This will be used to carefully toggle bits in the bitmap for sync=top
initialization in the following commits.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Just a few housekeeping changes that keeps the following commit easier
to read; perform the initial copy_bitmap initialization in one place.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
When making backups based on bitmaps, the work estimate can be more
accurate. Update iotests to reflect the new strategy.
TOP work estimates are broken, but do not get worse with this commit.
That issue is addressed in the following commits instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This is nicer to do in the unified QMP interface that we have now,
because it lets us use the right terminology back at the user.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716000117.25219-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
It is used to do transactional movement of the bitmap (which is
possible in conjunction with merge command). Transactional bitmap
movement is needed in scenarios with external snapshot, when we don't
want to leave copy of the bitmap in the base image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190708220502.12977-3-jsnow@redhat.com
[Edited "since" version to 4.2 --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
With the "never" sync policy, we actually can utilize readonly bitmaps
now. Loosen the check at the QMP level, and tighten it based on
provided arguments down at the job creation level instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-19-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This adds an "always" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, the bitmap is *always* synchronized. This means
that for backups that fail part-way through, the bitmap retains a record of
which sectors need to be copied out to accomplish a new backup using the
old, partial result.
In effect, this allows us to "resume" a failed backup; however the new backup
will be from the new point in time, so it isn't a "resume" as much as it is
an "incremental retry." This can be useful in the case of extremely large
backups that fail considerably through the operation and we'd like to not waste
the work that was already performed.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-13-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This simplifies some interface matters; namely the initialization and
(later) merging the manifest back into the sync_bitmap if it was
provided.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Add a public interface for get. While we're at it,
rename "bdrv_get_dirty_bitmap_locked" to "bdrv_dirty_bitmap_get_locked".
(There are more functions to rename to the bdrv_dirty_bitmap_VERB form,
but they will wait until the conclusion of this series.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-11-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
I'm surprised it didn't come up sooner, but sometimes we have a +busy
bitmap as a source. This is dangerous from the QMP API, but if we are
the owner that marked the bitmap busy, it's safe to merge it using it as
a read only source.
It is not safe in the general case to allow users to read from in-use
bitmaps, so create an internal variant that foregoes the safety
checking.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-10-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
This adds a "never" policy for bitmap synchronization. Regardless of if
the job succeeds or fails, we never update the bitmap. This can be used
to perform differential backups, or simply to avoid the job modifying a
bitmap.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
We don't need or want a new sync mode for simple differences in
semantics. Create a new mode simply named "BITMAP" that is designed to
make use of the new Bitmap Sync Mode field.
Because the only bitmap sync mode is 'on-success', this adds no new
functionality to the backup job (yet). The old incremental backup mode
is maintained as a syntactic sugar for sync=bitmap, mode=on-success.
Add all of the plumbing necessary to support this new instruction.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190709232550.10724-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Block layer patches:
- file-posix: Fix O_DIRECT alignment detection
- Fixes for concurrent block jobs
- block-backend: Queue requests while drained (fix IDE vs. job crashes)
- qemu-img convert: Deprecate using -n and -o together
- iotests: Migration tests with filter nodes
- iotests: More media change tests
# gpg: Signature made Fri 16 Aug 2019 10:29:18 BST
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream:
file-posix: Handle undetectable alignment
qemu-img convert: Deprecate using -n and -o together
block-backend: Queue requests while drained
mirror: Keep mirror_top_bs drained after dropping permissions
block: Remove blk_pread_unthrottled()
iotests: Add test for concurrent stream/commit
tests: Test mid-drain bdrv_replace_child_noperm()
tests: Test polling in bdrv_drop_intermediate()
block: Reduce (un)drains when replacing a child
block: Keep subtree drained in drop_intermediate
block: Simplify bdrv_filter_default_perms()
iotests: Test migration with all kinds of filter nodes
iotests: Move migration helpers to iotests.py
iotests/118: Add -blockdev based tests
iotests/118: Create test classes dynamically
iotests/118: Test media change for scsi-cd
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
nbd patches for 2019-08-15
- Addition of InetSocketAddress keep-alive
- Addition of BDRV_REQ_PREFETCH for more efficient copy-on-read
- Initial refactoring in preparation of NBD reconnect
# gpg: Signature made Thu 15 Aug 2019 19:28:41 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-08-15:
block/nbd: refactor nbd connection parameters
block/nbd: add cmdline and qapi parameter reconnect-delay
block/nbd: move from quit to state
block/nbd: use non-blocking io channel for nbd negotiation
block/nbd: split connection_co start out of nbd_client_connect
nbd: improve CMD_CACHE: use BDRV_REQ_PREFETCH
block/stream: use BDRV_REQ_PREFETCH
block: implement BDRV_REQ_PREFETCH
qapi: Add InetSocketAddress member keep-alive
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
|
|
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
docs/devel/tracing.txt explains "since many source files include
trace.h, [the generated trace.h use] a minimum of types and other
header files included to keep the namespace clean and compile times
and dependencies down."
Commit 4815185902 "trace: Add per-vCPU tracing states for events with
the 'vcpu' property" made them all include qom/cpu.h via
control-internal.h. qom/cpu.h in turn includes about thirty headers.
Ouch.
Per-vCPU tracing is currently not supported in sub-directories'
trace-events. In other words, qom/cpu.h can only be used in
trace-root.h, not in any trace.h.
Split trace/control-vcpu.h off trace/control.h and
trace/control-internal.h. Have the generated trace.h include
trace/control.h (which no longer includes qom/cpu.h), and trace-root.h
include trace/control-vcpu.h (which includes it).
The resulting improvement is a bit disappointing: in my "build
everything" tree, some 1100 out of 6600 objects (not counting tests
and objects that don't depend on qemu/osdep.h) depend on a trace.h,
and about 600 of them no longer depend on qom/cpu.h. But more than
1300 others depend on trace-root.h. More work is clearly needed.
Left for another day.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-8-armbru@redhat.com>
|
|
In some cases buf_align or request_alignment cannot be detected:
1. With Gluster, buf_align cannot be detected since the actual I/O is
done on Gluster server, and qemu buffer alignment does not matter.
Since we don't have alignment requirement, buf_align=1 is the best
value.
2. With local XFS filesystem, buf_align cannot be detected if reading
from unallocated area. In this we must align the buffer, but we don't
know what is the correct size. Using the wrong alignment results in
I/O error.
3. With Gluster backed by XFS, request_alignment cannot be detected if
reading from unallocated area. In this case we need to use the
correct alignment, and failing to do so results in I/O errors.
4. With NFS, the server does not use direct I/O, so both buf_align cannot
be detected. In this case we don't need any alignment so we can use
buf_align=1 and request_alignment=1.
These cases seems to work when storage sector size is 512 bytes, because
the current code starts checking align=512. If the check succeeds
because alignment cannot be detected we use 512. But this does not work
for storage with 4k sector size.
To determine if we can detect the alignment, we probe first with
align=1. If probing succeeds, maybe there are no alignment requirement
(cases 1, 4) or we are probing unallocated area (cases 2, 3). Since we
don't have any way to tell, we treat this as undetectable alignment. If
probing with align=1 fails with EINVAL, but probing with one of the
expected alignments succeeds, we know that we found a working alignment.
Practically the alignment requirements are the same for buffer
alignment, buffer length, and offset in file. So in case we cannot
detect buf_align, we can use request alignment. If we cannot detect
request alignment, we can fallback to a safe value. To use this logic,
we probe first request alignment instead of buf_align.
Here is a table showing the behaviour with current code (the value in
parenthesis is the optimal value).
Case Sector buf_align (opt) request_alignment (opt) result
======================================================================
1 512 512 (1) 512 (512) OK
1 4096 512 (1) 4096 (4096) FAIL
----------------------------------------------------------------------
2 512 512 (512) 512 (512) OK
2 4096 512 (4096) 4096 (4096) FAIL
----------------------------------------------------------------------
3 512 512 (1) 512 (512) OK
3 4096 512 (1) 512 (4096) FAIL
----------------------------------------------------------------------
4 512 512 (1) 512 (1) OK
4 4096 512 (1) 512 (1) OK
Same cases with this change:
Case Sector buf_align (opt) request_alignment (opt) result
======================================================================
1 512 512 (1) 512 (512) OK
1 4096 4096 (1) 4096 (4096) OK
----------------------------------------------------------------------
2 512 512 (512) 512 (512) OK
2 4096 4096 (4096) 4096 (4096) OK
----------------------------------------------------------------------
3 512 4096 (1) 4096 (512) OK
3 4096 4096 (1) 4096 (4096) OK
----------------------------------------------------------------------
4 512 4096 (1) 4096 (1) OK
4 4096 4096 (1) 4096 (1) OK
I tested that provisioning VMs and copying disks on local XFS and
Gluster with 4k bytes sector size work now, resolving bugs [1],[2].
I tested also on XFS, NFS, Gluster with 512 bytes sector size.
[1] https://bugzilla.redhat.com/1737256
[2] https://bugzilla.redhat.com/1738657
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This fixes devices like IDE that can still start new requests from I/O
handlers in the CPU thread while the block backend is drained.
The basic assumption is that in a drain section, no new requests should
be allowed through a BlockBackend (blk_drained_begin/end don't exist,
we get drain sections only on the node level). However, there are two
special cases where requests should not be queued:
1. Block jobs: We already make sure that block jobs are paused in a
drain section, so they won't start new requests. However, if the
drain_begin is called on the job's BlockBackend first, it can happen
that we deadlock because the job stays busy until it reaches a pause
point - which it can't if its requests aren't processed any more.
The proper solution here would be to make all requests through the
job's filter node instead of using a BlockBackend. For now, just
disabling request queuing on the job BlockBackend is simpler.
2. In test cases where making requests through bdrv_* would be
cumbersome because we'd need a BdrvChild. As we already got the
functionality to disable request queuing from 1., use it in tests,
too, for convenience.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
mirror_top_bs is currently implicitly drained through its connection to
the source or the target node. However, the drain section for target_bs
ends early after moving mirror_top_bs from src to target_bs, so that
requests can already be restarted while mirror_top_bs is still present
in the chain, but has dropped all permissions and therefore runs into an
assertion failure like this:
qemu-system-x86_64: block/io.c:1634: bdrv_co_write_req_prepare:
Assertion `child->perm & BLK_PERM_WRITE' failed.
Keep mirror_top_bs drained until all graph changes have completed.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
The functionality offered by blk_pread_unthrottled() goes back to commit
498e386c584. Then, we couldn't perform I/O throttling with synchronous
requests because timers wouldn't be executed in polling loops. So the
commit automatically disabled I/O throttling as soon as a synchronous
request was issued.
However, for geometry detection during disk initialisation, we always
used (and still use) synchronous requests even if guest requests use AIO
later. Geometry detection was not wanted to disable I/O throttling, so
bdrv_pread_unthrottled() was introduced which disabled throttling only
temporarily.
All of this isn't necessary any more because we do run timers in polling
loop and even synchronous requests are now using coroutine
infrastructure internally. For this reason, commit 90c78624f already
removed the automatic disabling of I/O throttling.
It's time to get rid of the workaround for the removed code, and its
abuse of blk_root_drained_begin()/end(), as well.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
We'll need some connection parameters to be available all the time to
implement nbd reconnect. So, let's refactor them: define additional
parameters in BDRVNBDState, drop them from function parameters, drop
nbd_client_init and separate options parsing instead from nbd_open.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190618114328.55249-6-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: Drop useless 'if' before object_unref]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Reconnect will be implemented in the following commit, so for now,
in semantics below, disconnect itself is a "serious error".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-5-vsementsov@virtuozzo.com>
[eblake: slipped from 4.1 to 4.2]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
To implement reconnect we need several states for the client:
CONNECTED, QUIT and two different CONNECTING states. CONNECTING states
will be added in the following patches. This patch implements CONNECTED
and QUIT.
QUIT means, that we should close the connection and fail all current
and further requests (like old quit = true).
CONNECTED means that connection is ok, we can send requests (like old
quit = false).
For receiving loop we use a comparison of the current state with QUIT,
because reconnect will be in the same loop, so it should be looping
until the end.
Opposite, for requests we use a comparison of the current state with
CONNECTED, as we don't want to send requests in future CONNECTING
states.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-4-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
No reason to use blocking channel for negotiation and we'll benefit in
further reconnect feature, as qio_channel reads and writes will do
qemu_coroutine_yield while waiting for io completion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-3-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
nbd_client_connect is going to be used from connection_co, so, let's
refactor nbd_client_connect in advance, leaving io channel
configuration all in nbd_client_connect.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190618114328.55249-2-vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This helps to avoid extra io, allocations and memory copying.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190725100550.33801-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: fix comment grammar]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Do effective copy-on-read request when we don't need data actually. It
will be used for block-stream and NBD_CMD_CACHE.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190725100550.33801-2-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[eblake: comment grammar fix]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Enabled by default copy_range ignores compress option. It's definitely
unexpected for user.
It's broken since introduction of copy_range usage in backup in
9ded4a011496.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190730163251.755248-3-vsementsov@virtuozzo.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
In write-blocking mode, all writes to the top node directly go to the
target. We must only mirror chunks of data that are aligned to the
job's granularity, because that is how the dirty bitmap works.
Therefore, the request alignment for writes must be the job's
granularity (in write-blocking mode).
Unfortunately, this forces all reads and writes to have the same
granularity (we only need this alignment for writes to the target, not
the source), but that is something to be fixed another time.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190805153308.2657-1-mreitz@redhat.com
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Fixes: d06107ade0ce74dc39739bac80de84b51ec18546
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The backup job must only copy areas that the copy_bitmap reports as
dirty. This is always the case when using traditional non-offloading
backup, because it copies each cluster separately. When offloading the
copy operation, we sometimes copy more than one cluster at a time, but
we only check whether the first one is dirty.
Therefore, whenever copy offloading is possible, the backup job
currently produces wrong output when the guest writes to an area of
which an inner part has already been backed up, because that inner part
will be re-copied.
Fixes: 9ded4a0114968e98b41494fc035ba14f84cdf700
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190801173900.23851-2-mreitz@redhat.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Linux does not support blocks greater than 4 kB anyway, so we might as
well limit blkshift to 12 and thus save us from some potential trouble.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190730114812.10493-1-mreitz@redhat.com
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Coverity: CID 1403771
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The copy-on-read drive must not request the WRITE_UNCHANGED permission
for its child if the node is inactive, otherwise starting a migration
destination with -incoming will fail because the child cannot provide
write access yet:
qemu-system-x86_64: -blockdev copy-on-read,file=img,node-name=cor: Block node is read-only
Earlier QEMU versions additionally ran into an abort() on the migration
source side: bdrv_inactivate_recurse() failed to update permissions.
This is silently ignored today because it was only supposed to loosen
restrictions. This is the symptom that was originally reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1733022
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Decrementing drained_end_counter after bdrv_dec_in_flight() (which in
turn invokes bdrv_wakeup() and thus aio_wait_kick()) is not very clever.
We should decrement it beforehand, so that any waiting aio_poll() that
is woken by bdrv_dec_in_flight() sees the decremented
drained_end_counter.
Because the time window between decrementing drained_end_counter and
aio_wait_kick() is very small, I cannot supply a reliable regression
test. However, running e.g. the /bdrv-drain/blockjob/iothread/drain_all
test in test-bdrv-drain has a small chance of hanging without this
patch (about 1/200 or so; it gets to nearly 100 % if you add e.g. an
fputc(' ', stderr); after the bdrv_dec_in_flight()).
Fixes: e037c09c78520cbdb6da7cfc6ad0256d5870b814
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190722133054.21781-2-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Completion entries are meant to be only read by the host and written by the device.
The driver is supposed to scan the completions from the last point where it left,
and until it sees a completion with non flipped phase bit.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716163020.13383-4-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Currently the driver hardcodes the sector size to 512,
and doesn't check the underlying device. Fix that.
Also fail if underlying nvme device is formatted with metadata
as this needs special support.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20190716163020.13383-3-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Fix the math involving non standard doorbell stride
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190716163020.13383-2-mlevitsk@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
staging
nbd patches for 2019-07-19
- silence harmless compiler/valgrind warning
# gpg: Signature made Fri 19 Jul 2019 21:17:12 BST
# gpg: using RSA key A7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg: aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A
* remotes/ericb/tags/pull-nbd-2019-07-19:
nbd: Initialize reply on failure
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We've had two separate reports of different callers running into use
of uninitialized data if s->quit is set (one detected by gcc -O3,
another by valgrind), due to checking 'nbd_reply_is_simple(reply) ||
s->quit' in the wrong order. Rather than chasing down which callers
need to pre-initialize reply, and whether there are any other
uninitialized uses, it's easier to guarantee that reply will always be
set by nbd_co_receive_one_chunk() even on failure.
The uninitialized use happens to be harmless (the only time the
variable is uninitialized is if s->quit is set, so the conditional
results in the same action regardless of what was read from reply),
and was introduced in commit 65e01d47.
In fixing the problem, it can also be seen that all (one) callers pass
in a non-NULL reply, so there is a dead conditional to also be cleaned
up.
Reported-by: Thomas Huth <thuth@redhat.com>
Reported-by: Andrey Shinkevich <andrey.shinkevich@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190719172001.19770-1-eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
The graph must not change in these loops (or a QLIST_FOREACH_SAFE would
not even be enough). We now ensure this by only polling once in the
root bdrv_drained_end() call, so we can drop the _SAFE suffix. Doing so
makes it clear that the graph must not change.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We should never poll anywhere in bdrv_do_drained_end() (including its
recursive callees like bdrv_drain_invoke()), because it does not cope
well with graph changes. In fact, it has been written based on the
postulation that no graph changes will happen in it.
Instead, the callers that want to poll must poll, i.e. all currently
globally available wrappers: bdrv_drained_end(),
bdrv_subtree_drained_end(), bdrv_unapply_subtree_drain(), and
bdrv_drain_all_end(). Graph changes there do not matter.
They can poll simply by passing a pointer to a drained_end_counter and
wait until it reaches 0.
This patch also adds a non-polling global wrapper for
bdrv_do_drained_end() that takes a drained_end_counter pointer. We need
such a variant because now no function called anywhere from
bdrv_do_drained_end() must poll. This includes
BdrvChildRole.drained_end(), which already must not poll according to
its interface documentation, but bdrv_child_cb_drained_end() just
violates that by invoking bdrv_drained_end() (which does poll).
Therefore, BdrvChildRole.drained_end() must take a *drained_end_counter
parameter, which bdrv_child_cb_drained_end() can pass on to the new
bdrv_drained_end_no_poll() function.
Note that we now have a pattern of all drained_end-related functions
either polling or receiving a *drained_end_counter to let the caller
poll based on that.
A problem with a single poll loop is that when the drained section in
bdrv_set_aio_context_ignore() ends, some nodes in the subgraph may be in
the old contexts, while others are in the new context already. To let
the collective poll in bdrv_drained_end() work correctly, we must not
hold a lock to the old context, so that the old context can make
progress in case it is different from the current context.
(In the process, remove the comment saying that the current context is
always the old context, because it is wrong.)
In all other places, all nodes in a subtree must be in the same context,
so we can just poll that. The exception of course is
bdrv_drain_all_end(), but that always runs in the main context, so we
can just poll NULL (like bdrv_drain_all_begin() does).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
These functions are not used outside of block/io.c, there is no reason
why they should be globally available.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
