| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch aims to bring the following behavior:
1. We don't load bitmaps, when started in inactive mode. It's the case
of incoming migration. In this case we wait for bitmaps migration
through migration channel (if 'dirty-bitmaps' capability is enabled) or
for invalidation (to load bitmaps from the image).
2. We don't remove persistent bitmaps on inactivation. Instead, we only
remove bitmaps after storing. This is the only way to restore bitmaps,
if we decided to resume source after [failed] migration with
'dirty-bitmaps' capability enabled (which means, that bitmaps were not
stored).
3. We load bitmaps on open and any invalidation, it's ok for all cases:
- normal open
- migration target invalidation with dirty-bitmaps capability
(bitmaps are migrating through migration channel, the are not
stored, so they should have IN_USE flag set and will be skipped
when loading. However, it would fail if bitmaps are read-only[1])
- migration target invalidation without dirty-bitmaps capability
(normal load of the bitmaps, if migrated with shared storage)
- source invalidation with dirty-bitmaps capability
(skip because IN_USE)
- source invalidation without dirty-bitmaps capability
(bitmaps were dropped, reload them)
[1]: to accurately handle this, migration of read-only bitmaps is
explicitly forbidden in this patch.
New mechanism for not storing bitmaps when migrate with dirty-bitmaps
capability is introduced: migration filed in BdrvDirtyBitmap.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
bdrv_img_create() takes an Error ** argument and uses it in the
conventional way, except for one place: when qemu_opts_do_parse()
fails, it first reports its error to stderr or the HMP monitor with
error_report_err(), then error_setg()'s a generic error.
When the caller reports that second error similarly, this produces two
consecutive error messages on stderr or the HMP monitor.
When the caller does something else with it, such as send it via QMP,
the first error still goes to stderr or the HMP monitor. Fortunately,
no such caller exists.
Simply use the first error as is. Update expected output of
qemu-iotest 049 accordingly.
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-37-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
|
|
From include/qapi/error.h:
* Pass an existing error to the caller with the message modified:
* error_propagate(errp, err);
* error_prepend(errp, "Could not frobnicate '%s': ", name);
Fei Li pointed out that doing error_propagate() first doesn't work
well when @errp is &error_fatal or &error_abort: the error_prepend()
is never reached.
Since I doubt fixing the documentation will stop people from getting
it wrong, introduce error_propagate_prepend(), in the hope that it
lures people away from using its constituents in the wrong order.
Update the instructions in error.h accordingly.
Convert existing error_prepend() next to error_propagate to
error_propagate_prepend(). If any of these get reached with
&error_fatal or &error_abort, the error messages improve. I didn't
check whether that's the case anywhere.
Cc: Fei Li <fli@suse.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20181017082702.5581-2-armbru@redhat.com>
|
|
'detect-zeroes' is one of the basic BlockdevOptions available for all
drivers, but it's not handled by bdrv_reopen_prepare(), so any attempt
to change it results in an error:
(qemu) qemu-io virtio0 "reopen -o detect-zeroes=on"
Cannot change the option 'detect-zeroes'
Since there's no reason why we shouldn't allow changing it and the
implementation is simple let's just do it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
'discard' is one of the basic BlockdevOptions available for all
drivers, but it's not handled by bdrv_reopen_prepare() so any attempt
to change it results in an error:
(qemu) qemu-io virtio0 "reopen -o discard=on"
Cannot change the option 'discard'
Since there's no reason why we shouldn't allow changing it and the
implementation is simple let's just do it.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The bdrv_reopen_prepare() function checks all options passed to each
BlockDriverState (in the reopen_state->options QDict) and makes all
necessary preparations to apply the option changes requested by the
user.
Options are removed from the QDict as they are processed, so at the
end of bdrv_reopen_prepare() only the options that can't be changed
are left. Then a loop goes over all remaining options and verifies
that the old and new values are identical, returning an error if
they're not.
The problem is that at the moment there are options that are removed
from the QDict although they can't be changed. The consequence of this
is any modification to any of those options is silently ignored:
(qemu) qemu-io virtio0 "reopen -o discard=on"
This happens when all options from bdrv_runtime_opts are removed
from the QDict but then only a few of them are processed. Since
it's especially important that "node-name" and "driver" are not
changed, the code puts them back into the QDict so they are checked
at the end of the function. Instead of putting only those two options
back into the QDict, this patch puts all unprocessed options using
qemu_opts_to_qdict().
update_flags_from_options() also needs to be modified to prevent
BDRV_OPT_CACHE_NO_FLUSH, BDRV_OPT_CACHE_DIRECT and BDRV_OPT_READ_ONLY
from going back to the QDict.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In the previous patches we removed all child references from
bs->{options,explicit_options} because keeping them is useless and
wrong.
Because of this, any attempt to reopen a BlockDriverState using a
child reference as one of its options would result in a failure,
because bdrv_reopen_prepare() would detect that there's a new option
(the child reference) that wasn't present in bs->options.
But passing child references on reopen can be useful. It's a way to
specify a BDS's child without having to pass recursively all of the
child's options, and if the reference points to a different BDS then
this can allow us to replace the child.
However, replacing the child is something that needs to be implemented
case by case and only when it makes sense. For now, this patch allows
passing a child reference as long as it points to the current child of
the BlockDriverState.
It's also important to remember that, as a consequence of the
previous patches, this child reference will be removed from
bs->{options,explicit_options} after the reopening has been completed.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In the previous patch we removed child references from bs->options, so
there's no need to look for them here anymore.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block drivers allow opening their children using a reference to an
existing BlockDriverState. These references remain stored in the
'options' and 'explicit_options' QDicts, but we don't need to keep
them once everything is open.
What is more important, these values can become wrong if the children
change:
$ qemu-img create -f qcow2 hd0.qcow2 10M
$ qemu-img create -f qcow2 hd1.qcow2 10M
$ qemu-img create -f qcow2 hd2.qcow2 10M
$ $QEMU -drive if=none,file=hd0.qcow2,node-name=hd0 \
-drive if=none,file=hd1.qcow2,node-name=hd1,backing=hd0 \
-drive file=hd2.qcow2,node-name=hd2,backing=hd1
After this hd2 has hd1 as its backing file. Now let's remove it using
block_stream:
(qemu) block_stream hd2 0 hd0.qcow2
Now hd0 is the backing file of hd2, but hd2's options QDicts still
contain backing=hd1.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When draining a block node, we recurse to its parent and for subtree
drains also to its children. A single AIO_WAIT_WHILE() is then used to
wait for bdrv_drain_poll() to become true, which depends on all of the
nodes we recursed to. However, if the respective child or parent becomes
quiescent and calls bdrv_wakeup(), only the AioWait of the child/parent
is checked, while AIO_WAIT_WHILE() depends on the AioWait of the
original node.
Fix this by using a single AioWait for all callers of AIO_WAIT_WHILE().
This may mean that the draining thread gets a few more unnecessary
wakeups because an unrelated operation got completed, but we already
wake it up when something _could_ have changed rather than only if it
has certainly changed.
Apart from that, drain is a slow path anyway. In theory it would be
possible to use wakeups more selectively and still correctly, but the
gains are likely not worth the additional complexity. In fact, this
patch is a nice simplification for some places in the code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
When a block device is opened with BDRV_O_SNAPSHOT and the
bdrv_append_temp_snapshot() call fails then the error code path tries
to unref the already destroyed 'options' QDict.
This can be reproduced easily by setting TMPDIR to a location where
the QEMU process can't write:
$ TMPDIR=/nonexistent $QEMU -drive driver=null-co,snapshot=on
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The last case where qobject_from_json() & friends return null without
setting an error is empty or blank input. Callers:
* block.c's parse_json_protocol() reports "Could not parse the JSON
options". It's marked as a work-around, because it also covered
actual bugs, but they got fixed in the previous few commits.
* qobject_input_visitor_new_str() reports "JSON parse error". Also
marked as work-around. The recent fixes have made this unreachable,
because it currently gets called only for input starting with '{'.
* check-qjson.c's empty_input() and blank_input() demonstrate the
behavior.
* The other callers are not affected since they only pass input with
exactly one JSON value or, in the case of negative tests, one error.
Fail with "Expecting a JSON value" instead of returning null, and
simplify callers.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-48-armbru@redhat.com>
|
|
This function returns a BDS's driver-specific options, excluding also
those from its children. Since we have just removed all children
options from bs->options there's no need to do this last step.
We allow references to children, though ("backing": "node0"), so those
we still have to remove.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If bdrv_reopen() succeeds then bs->explicit_options is updated with
the new values, but bs->options never changes.
Here's an example:
{ "execute": "blockdev-add",
"arguments": {
"driver": "qcow2",
"node-name": "hd0",
"overlap-check": "all",
"file": {
"driver": "file",
"filename": "hd0.qcow2"
}
}
}
After this, both bs->options and bs->explicit_options contain
"overlap-check": "all".
Now let's change that using qemu-io's reopen command:
(qemu) qemu-io hd0 "reopen -o overlap-check=none"
After this, bs->explicit_options contains the new value but
bs->options still keeps the old one.
This patch updates bs->options after a BDS has been successfully
reopened.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If a bdrv_reopen_multiple() call fails, then the explicit_options
QDict has to be deleted for every entry in the reopen queue. This must
happen regardless of whether that entry's bdrv_reopen_prepare() call
succeeded or not.
This patch simplifies the cleanup code a bit.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When bdrv_open_inherit() opens a BlockDriverState the options QDict
can contain options for some of its children, passed in the form of
child-name.option=value
So while each child is opened with that subset of options, those same
options remain stored in the parent BDS, leaving (at least) two copies
of each one of them ("child-name.option=value" in the parent and
"option=value" in the child).
Having the children options stored in the parent is unnecessary and it
can easily lead to an inconsistent state:
$ qemu-img create -f qcow2 hd0.qcow2 10M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-img create -f qcow2 -b hd1.qcow2 hd2.qcow2
$ $QEMU -drive file=hd2.qcow2,node-name=hd2,backing.node-name=hd1
This opens a chain of images hd0 <- hd1 <- hd2. Now let's remove hd1
using block_stream:
(qemu) block_stream hd2 0 hd0.qcow2
After this hd2 contains backing.node-name=hd1, which is no longer
correct because hd1 doesn't exist anymore.
This patch removes all children options from the parent dictionaries
at the end of bdrv_open_inherit() and bdrv_reopen_queue_child().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Commit dcf94a23b1 ('block: Don't poll in parent drain callbacks')
removed polling in bdrv_child_cb_drained_begin() on the grounds that the
original bdrv_drain() already will poll and BdrvChildRole.drained_begin
calls must not cause graph changes (and therefore must not call
aio_poll() or the recursion through the graph will break.
This reasoning is correct for calls through bdrv_do_drained_begin().
However, BdrvChildRole.drained_begin is also called when a node that is
already in a drained section (i.e. bdrv_do_drained_begin() has already
returned and therefore can't poll any more) is attached to a new parent.
In this case, we must explicitly poll to have all requests completed
before the drained new child can be attached to the parent.
In bdrv_replace_child_noperm(), we know that we're not inside the
recursion of bdrv_do_drained_begin() because graph changes are not
allowed there, and bdrv_replace_child_noperm() is a graph change. The
call of BdrvChildRole.drained_begin() must therefore be followed by a
BDRV_POLL_WHILE() that waits for the completion of requests.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
If the user passes a too long node name string, we silently truncate it
to fit into BlockDriverState.node_name, i.e. to 31 characters. Apart
from surprising the user when the node has a different name than
requested, this also bypasses the check for duplicate names, so that the
same name can be assigned to multiple nodes.
Fix this by just making too long node names an error.
Reported-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This allows using the two constants outside of block.c, which will
happen in a subsequent patch.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This moves the bdrv_truncate() implementation from block.c to block/io.c
so it can have access to the tracked requests infrastructure.
This involves making refresh_total_sectors() public (in block_int.h).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
bdrv_truncate() is an operation that can block (even for a quite long
time, depending on the PreallocMode) in I/O paths that shouldn't block.
Convert it to a coroutine_fn so that we have the infrastructure for
drivers to make their .bdrv_co_truncate implementation asynchronous.
This change could potentially introduce new race conditions because
bdrv_truncate() isn't necessarily executed atomically any more. Whether
this is a problem needs to be evaluated for each block driver that
supports truncate:
* file-posix/win32, gluster, iscsi, nfs, rbd, ssh, sheepdog: The
protocol drivers are trivially safe because they don't actually yield
yet, so there is no change in behaviour.
* copy-on-read, crypto, raw-format: Essentially just filter drivers that
pass the request to a child node, no problem.
* qcow2: The implementation modifies metadata, so it needs to hold
s->lock to be safe with concurrent I/O requests. In order to avoid
double locking, this requires pulling the locking out into
preallocate_co() and using qcow2_write_caches() instead of
bdrv_flush().
* qed: Does a single header update, this is fine without locking.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Currently, bdrv_replace_node() refuses to create loops from one BDS to
itself if the BDS to be replaced is the backing node of the BDS to
replace it: Say there is a node A and a node B. Replacing B by A means
making all references to B point to A. If B is a child of A (i.e. A has
a reference to B), that would mean we would have to make this reference
point to A itself -- so we'd create a loop.
bdrv_replace_node() (through should_update_child()) refuses to do so if
B is the backing node of A. There is no reason why we should create
loops if B is not the backing node of A, though. The BDS graph should
never contain loops, so we should always refuse to create them.
If B is a child of A and B is to be replaced by A, we should simply
leave B in place there because it is the most sensible choice.
A more specific argument would be: Putting filter drivers into the BDS
graph is basically the same as appending an overlay to a backing chain.
But the main child BDS of a filter driver is not "backing" but "file",
so restricting the no-loop rule to backing nodes would fail here.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180613181823.13618-7-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
bdrv_drain_all_*() used bdrv_next() to iterate over all root nodes and
did a subtree drain for each of them. This works fine as long as the
graph is static, but sadly, reality looks different.
If the graph changes so that root nodes are added or removed, we would
have to compensate for this. bdrv_next() returns each root node only
once even if it's the root node for multiple BlockBackends or for a
monitor-owned block driver tree, which would only complicate things.
The much easier and more obviously correct way is to fundamentally
change the way the functions work: Iterate over all BlockDriverStates,
no matter who owns them, and drain them individually. Compensation is
only necessary when a new BDS is created inside a drain_all section.
Removal of a BDS doesn't require any action because it's gone afterwards
anyway.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In the future, bdrv_drained_all_begin/end() will drain all invidiual
nodes separately rather than whole subtrees. This means that we don't
want to propagate the drain to all parents any more: If the parent is a
BDS, it will already be drained separately. Recursing to all parents is
unnecessary work and would make it an O(n²) operation.
Prepare the drain function for the changed drain_all by adding an
ignore_bds_parents parameter to the internal implementation that
prevents the propagation of the drain to BDS parents. We still (have to)
propagate it to non-BDS parents like BlockBackends or Jobs because those
are not drained separately.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
bdrv_do_drained_begin() is only safe if we have a single
BDRV_POLL_WHILE() after quiescing all affected nodes. We cannot allow
that parent callbacks introduce a nested polling loop that could cause
graph changes while we're traversing the graph.
Split off bdrv_do_drained_begin_quiesce(), which only quiesces a single
node without waiting for its requests to complete. These requests will
be waited for in the BDRV_POLL_WHILE() call down the call chain.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Anything can happen inside BDRV_POLL_WHILE(), including graph
changes that may interfere with its callers (e.g. child list iteration
in recursive callers of bdrv_do_drained_begin).
Switch to a single BDRV_POLL_WHILE() call for the whole subtree at the
end of bdrv_do_drained_begin() to avoid such effects. The recursion
happens now inside the loop condition. As the graph can only change
between bdrv_drain_poll() calls, but not inside of it, doing the
recursion here is safe.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We already requested that block jobs be paused in .bdrv_drained_begin,
but no guarantee was made that the job was actually inactive at the
point where bdrv_drained_begin() returned.
This introduces a new callback BdrvChildRole.bdrv_drained_poll() and
uses it to make bdrv_drain_poll() consider block jobs using the node to
be drained.
For the test case to work as expected, we have to switch from
block_job_sleep_ns() to qemu_co_sleep_ns() so that the test job is even
considered active and must be waited for when draining the node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
There are numerous QDict functions that have been introduced for and are
used only by the block layer. Move their declarations into an own
header file to reflect that.
While qdict_extract_subqdict() is in fact used outside of the block
layer (in util/qemu-config.c), it is still a function related very
closely to how the block layer works with nested QDicts, namely by
sometimes flattening them. Therefore, its declaration is put into this
header as well and util/qemu-config.c includes it with a comment stating
exactly which function it needs.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20180509165530.29561-7-mreitz@redhat.com>
[Copyright note tweaked, superfluous includes dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is a useful function for the whole block layer, so make it public.
At the same time, users outside of block.c probably do not need to make
use of the reopen functionality, so rename the current function to
bdrv_is_writable_after_reopen() create a new bdrv_is_writable() function
that just passes NULL to it for the reopen queue.
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180606193702.7113-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Looking at the qcow2 code that is riddled with error_report() calls,
this is really how it should have been from the start.
Along the way, turn the target_version/current_version comparisons at
the beginning of qcow2_downgrade() into assertions (the caller has to
make sure these conditions are met), and rephrase the error message on
using compat=1.1 to get refcount widths other than 16 bits.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180509210023.20283-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Now that we cancel all jobs and not only block jobs on shutdown, doing
that in bdrv_close_all() isn't really appropriate any more. Move the
job_cancel_sync_all() call to the callers, and only assert that there
are no job running in bdrv_close_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This moves the top-level job completion and cancellation functions from
BlockJob to Job.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
For convenience and clarity, make it possible to call qobject_ref() at
the time when the reference is associated with a variable, or
argument, by making qobject_ref() return the same pointer as given.
Use that to simplify the callers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-5-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Useless change to qobject_ref_impl() dropped, commit message improved
slightly]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We have a clear replacement, so let's deprecate it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-8-mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Instead of converting all "backing": null instances into "backing": "",
handle a null value directly in bdrv_open_inherit().
This enables explicitly null backing links for json:{} filenames.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-7-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: rebase to qobject_to() parameter order and qapi headers split]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Reopen flags are not synchronized according to the
bdrv_reopen_queue_child precedence until bdrv_reopen_prepare. It is a
bit too late: we already check the consistency in bdrv_check_perm before
that.
This fixes the bug that when bdrv_reopen a RO node as RW, the flags for
backing child are wrong. Before, we could recurse with flags.rw=1; now,
role->inherit_options + update_flags_from_options will make sure to
clear the bit when necessary. Note that this will not clear an
explicitly set bit, as in the case of parallel block jobs (e.g.
test_stream_parallel in 030), because the explicit options include
'read-only=false' (for an intermediate node used by a different job).
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Most callers have their own checks, but something like this should also
be checked centrally. As it happens, x-blockdev-create can pass negative
image sizes to format drivers (because there is no QAPI type that would
reject negative numbers) and triggers the check added by this patch.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
We'll use a separate source file for image creation, and we need to
check there whether the requested driver is whitelisted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Instead of passing a separate BlockDriverState* into qcow2_co_create(),
make use of the BlockdevRef that is included in BlockdevCreateOptions.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
|
|
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1516279431-30424-8-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
QED's bdrv_invalidate_cache implementation would like to reuse functions
that acquire/release the metadata locks. Call it from coroutine context
to simplify the logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1516279431-30424-6-git-send-email-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Block layer patches
# gpg: Signature made Mon 05 Mar 2018 17:45:51 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (38 commits)
block: Fix NULL dereference on empty drive error
qcow2: Replace align_offset() with ROUND_UP()
block/ssh: Add basic .bdrv_truncate()
block/ssh: Make ssh_grow_file() blocking
block/ssh: Pull ssh_grow_file() from ssh_create()
qemu-img: Make resize error message more general
qcow2: make qcow2_co_create2() a coroutine_fn
block: rename .bdrv_create() to .bdrv_co_create_opts()
Revert "IDE: Do not flush empty CDROM drives"
block: test blk_aio_flush() with blk->root == NULL
block: add BlockBackend->in_flight counter
block: extract AIO_WAIT_WHILE() from BlockDriverState
aio: rename aio_context_in_iothread() to in_aio_context_home_thread()
docs: document how to use the l2-cache-entry-size parameter
specs/qcow2: Fix documentation of the compressed cluster descriptor
iotest 033: add misaligned write-zeroes test via truncate
block: fix write with zero flag set and iovector provided
block: Drop unused .bdrv_co_get_block_status()
vvfat: Switch to .bdrv_co_block_status()
vpc: Switch to .bdrv_co_block_status()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# include/block/block.h
|
|
In my "build everything" tree, a change to the types in
qapi-schema.json triggers a recompile of about 4800 out of 5100
objects.
The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h,
qapi-types.h. Each of these headers still includes all its shards.
Reduce compile time by including just the shards we actually need.
To illustrate the benefits: adding a type to qapi/migration.json now
recompiles some 2300 instead of 4800 objects. The next commit will
improve it further.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-24-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[eblake: rebase to master]
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180211093607.27351-2-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
