summaryrefslogtreecommitdiff
path: root/backends
AgeCommit message (Collapse)Author
2019-07-05general: Replace global smp variables with smp machine propertiesLike Xu
Basically, the context could get the MachineState reference via call chains or unrecommended qdev_get_machine() in !CONFIG_USER_ONLY mode. A local variable of the same name would be introduced in the declaration phase out of less effort OR replace it on the spot if it's only used once in the context. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-4-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-07-03VirtIO-RNG: Update default entropy source to `/dev/urandom`Kashyap Chamarthy
When QEMU exposes a VirtIO-RNG device to the guest, that device needs a source of entropy, and that source needs to be "non-blocking", like `/dev/urandom`. However, currently QEMU defaults to the problematic `/dev/random`, which on Linux is "blocking" (as in, it waits until sufficient entropy is available). Why prefer `/dev/urandom` over `/dev/random`? --------------------------------------------- The man pages of urandom(4) and random(4) state: "The /dev/random device is a legacy interface which dates back to a time where the cryptographic primitives used in the implementation of /dev/urandom were not widely trusted. It will return random bytes only within the estimated number of bits of fresh noise in the entropy pool, blocking if necessary. /dev/random is suitable for applications that need high quality randomness, and can afford indeterminate delays." Further, the "Usage" section of the said man pages state: "The /dev/random interface is considered a legacy interface, and /dev/urandom is preferred and sufficient in all use cases, with the exception of applications which require randomness during early boot time; for these applications, getrandom(2) must be used instead, because it will block until the entropy pool is initialized. "If a seed file is saved across reboots as recommended below (all major Linux distributions have done this since 2000 at least), the output is cryptographically secure against attackers without local root access as soon as it is reloaded in the boot sequence, and perfectly adequate for network encryption session keys. Since reads from /dev/random may block, users will usually want to open it in nonblocking mode (or perform a read with timeout), and provide some sort of user notification if the desired entropy is not immediately available." And refer to random(7) for a comparison of `/dev/random` and `/dev/urandom`. What about other OSes? ---------------------- `/dev/urandom` exists and works on OS-X, FreeBSD, DragonFlyBSD, NetBSD and OpenBSD, which cover all the non-Linux platforms we explicitly support, aside from Windows. On Windows `/dev/random` doesn't work either so we don't regress. This is actually another argument in favour of using the newly proposed 'rng-builtin' backend by default, as that will work on Windows. - - - Given the above, change the entropy source for VirtIO-RNG device to `/dev/urandom`. Related discussion in these[1][2] past threads. [1] https://lists.nongnu.org/archive/html/qemu-devel/2018-06/msg08335.html -- "RNG: Any reason QEMU doesn't default to `/dev/urandom`?" [2] https://lists.nongnu.org/archive/html/qemu-devel/2018-09/msg02724.html -- "[RFC] Virtio RNG: Consider changing the default entropy source to /dev/urandom" Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20190529143106.11789-2-lvivier@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-10Add vhost-user-backendMarc-André Lureau
Create a vhost-user-backend object that holds a connection to a vhost-user backend (or "slave" process) and can be referenced from virtio devices that support it. See later patches for input & gpu usage. Note: a previous iteration of this object made it user-creatable, and allowed managed sub-process spawning, but that has been dropped for now. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20190503130034.24916-4-marcandre.lureau@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-03-12vhost-user: simplify vhost_user_init/vhost_user_cleanupMarc-André Lureau
Take a VhostUserState* that can be pre-allocated, and initialize it with the associated chardev. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Tiwei Bie <tiwei.bie@intel.com> Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-03-11hostmem-memfd: disable for systems without sealing supportIlya Maximets
If seals are not supported, memfd_create() will fail. Furthermore, there is no way to disable it in this case because '.seal' property is not registered. This issue leads to vhost-user-test failures on RHEL 7.2: qemu-system-x86_64: -object memory-backend-memfd,id=mem,size=2M,: \ failed to create memfd: Invalid argument and actually breaks the feature on such systems. Let's restrict memfd backend to systems with sealing support. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Message-Id: <20190311135850.6537-2-i.maximets@samsung.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-11hostmem-file: reject invalid pmem file sizesStefan Hajnoczi
Guests started with NVDIMMs larger than the underlying host file produce confusing errors inside the guest. This happens because the guest accesses pages beyond the end of the file. Check the pmem file size on startup and print a clear error message if the size is invalid. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1669053 Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Zhang Yi <yi.z.zhang@linux.intel.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190214031004.32522-3-stefanha@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Pankaj Gupta <pagupta@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06hostmem: fix crash when querying empty host-nodes property via QMPIgor Mammedov
QEMU will crashes with qapi/qobject-output-visitor.c:210: qobject_output_complete: Assertion `qov->root && ((&qov->stack)->slh_first == ((void *)0))' failed when trying to get value of not set hostmem's "host-nodes" property, HostMemoryBackend::host_nodes bitmap doesn't have any bits set in it, which leads to find_first_bit() returning MAX_NODES and consequently to an early return from host_memory_backend_get_host_nodes() without calling visitor. Fix it by calling visitor even if "host-nodes" property wasn't set before exiting from property getter to return valid empty list. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190214105733.25643-1-imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06hostmem-file: simplify ifdef-s in file_backend_memory_alloc()Igor Mammedov
cleanup file_backend_memory_alloc() by using one CONFIG_POSIX ifdef instead of several ones within the function to make it simpler to follow. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190213123858.24620-1-imammedo@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190214031004.32522-2-stefanha@redhat.com> [lv: s/hostmem/hostmem-file/] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-02-21vhost: restrict Linux dependency to kernel vhostPaolo Bonzini
vhost-user does not depend on Linux; it can run on any POSIX system. Restrict vhost-kernel to Linux in hw/virtio/vhost-backend.c, everything else can be compiled on all POSIX systems. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <1543851204-41186-4-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1550165756-21617-4-git-send-email-pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-28hostmem: add more information in error messagesZhang Yi
When there are multiple memory backends in use, including the object type and property name in the error message can help users to locate the error. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com> Message-Id: <97d9193875747d8378c05b9e3b3cb39c1b7d2b4e.1546399191.git.yi.z.zhang@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> [ehabkost: reword commit message] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07hostmem: use object id for memory region name with >= 4.0Marc-André Lureau
hostmem-file and hostmem-memfd use the whole object path for the memory region name, and hostname-ram uses only the path component (the object id, or canonical path basename): qemu -m 1024 -object memory-backend-file,id=mem,size=1G,mem-path=/tmp/foo -numa node,memdev=mem -monitor stdio (qemu) info ramblock Block Name PSize Offset Used Total /objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000 qemu -m 1024 -object memory-backend-memfd,id=mem,size=1G -numa node,memdev=mem -monitor stdio (qemu) info ramblock Block Name PSize Offset Used Total /objects/mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000 qemu -m 1024 -object memory-backend-ram,id=mem,size=1G -numa node,memdev=mem -monitor stdio (qemu) info ramblock Block Name PSize Offset Used Total mem 4 KiB 0x0000000000000000 0x0000000040000000 0x0000000040000000 For consistency, change to use object id for -file and -memfd as well with >= 4.0. Having a consistent naming allows to migrate to different hostmem backends. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11hostmem: Validate host-nodes before setting bitmapEduardo Habkost
host_memory_backend_set_host_nodes() was not validating host-nodes before writing to backend->host_nodes, making QEMU write beyond the end of the bitmap. Fix the crash and add a simple regression test for the fix. While at it, fix memory leak of the list returned by visit_type_uint16List(). Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20181130122844.29103-1-ehabkost@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> [ehabkost: removed test case code] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-11hostmem-file: remove object id from pmem error messageZhang Yi
We will never get the canonical path from the object before object_property_add_child. Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com> Message-Id: <a6491f996827f4039c1a52198ed5dcc7727cb0f9.1540389255.git.yi.z.zhang@linux.intel.com> [ehabkost: reword commit message] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-11-28hostmem: no need to check for host_memory_backend_mr_inited() in alloc()Marc-André Lureau
memfd_backend_memory_alloc/file_backend_memory_alloc both needlessly are are calling host_memory_backend_mr_inited() which creates an illusion that alloc could be called multiple times but it isn't, it's called once from UserCreatable complete(). Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-11-27hostmem-memfd: honour share=on/off propertyMarc-André Lureau
The share=on/off property is used to modified mmap() MAP_SHARED setting. Make it on by default for convenience and compatibility reasons. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-24hostmem-file: fixed the memory leak while get pmem path.Zhang Yi
object_get_canonical_path_component() returns a string which must be freed using g_free(). Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Zhang Yi <yi.z.zhang@linux.intel.com> Message-Id: <7328fb16c394eaf5d65437d11c2a9343647b6d3d.1535471899.git.yi.z.zhang@linux.intel.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-05hostmem: add some properties descriptionMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02hostmem-file: make available memory-backend-file on POSIX-based hostsHikaru Nishida
Before this change, memory-backend-file object is valid for Linux hosts only because hostmem-file.c is compiled only on Linux hosts. However, other POSIX-based hosts (such as macOS) can support memory-backend-file object in the same way as on Linux hosts. This patch makes hostmem-file.c and related functions to be compiled on all POSIX-based hosts to make available memory-backend-file on them. Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com> Message-Id: <20180924123205.29651-1-hikarupsp@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02hostmem-memfd: add checks before adding hostmem-memfd & propertiesMarc-André Lureau
Run some memfd-related checks before registering hostmem-memfd & various properties. This will help libvirt to figure out what the host is supposed to be capable of. qemu_memfd_check() is changed to a less optimized version, since it is used with various flags, it no longer caches the result. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180906161415.8543-1-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-10hostmem-file: add the 'pmem' optionJunyan He
When QEMU emulates vNVDIMM labels and migrates vNVDIMM devices, it needs to know whether the backend storage is a real persistent memory, in order to decide whether special operations should be performed to ensure the data persistence. This boolean option 'pmem' allows users to specify whether the backend storage of memory-backend-file is a real persistent memory. If 'pmem=on', QEMU will set the flag RAM_PMEM in the RAM block of the corresponding memory region. If 'pmem' is set while lack of libpmem support, a error is generated. Signed-off-by: Junyan He <junyan.he@intel.com> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-10memory, exec: switch file ram allocation functions to 'flags' parametersJunyan He
As more flag parameters besides the existing 'share' are going to be added to following functions memory_region_init_ram_from_file qemu_ram_alloc_from_fd qemu_ram_alloc_from_file let's switch them to use the 'flags' parameters so as to ease future flag additions. The existing 'share' flag is converted to the RAM_SHARED bit in ram_flags, and other flag bits are ignored by above functions right now. Signed-off-by: Junyan He <junyan.he@intel.com> Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2018-07-30backends/cryptodev: remove dead codeJay Zhou
Fix Coverity issue 1390600. Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Message-Id: <1524894864-7492-1-git-send-email-jianjay.zhou@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-28hostmem: drop error variable from host_memory_backend_get_memory()David Hildenbrand
Unused, so let's remove it. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180619134141.29478-8-david@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-24vhost-user: introduce shared vhost-user stateTiwei Bie
When multi queue is enabled e.g. for a virtio-net device, each queue pair will have a vhost_dev, and the only thing shared between vhost devs currently is the chardev. This patch introduces a vhost-user state structure which will be shared by all vhost devs of the same virtio device. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-05-09memdev: remove "id" propertyPaolo Bonzini
The "id" property is unnecessary and can be replaced simply with object_get_canonical_path_component. This patch mostly undoes commit e1ff3c67e8 ("monitor: fix qmp/hmp query-memdev not reporting IDs of memory backends", 2017-01-12). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-27Add host_memory_backend_pagesize() helperDavid Gibson
There are a couple places (one generic, one target specific) where we need to get the host page size associated with a particular memory backend. I have some upcoming code which will add another place which wants this. So, for convenience, add a helper function to calculate this. host_memory_backend_pagesize() returns the host pagesize for a given HostMemoryBackend object. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02qapi: Move qapi-schema.json to qapi/, rename generated filesMarkus Armbruster
Move qapi-schema.json to qapi/, so it's next to its modules, and all files get generated to qapi/, not just the ones generated for modules. Consistently name the generated files qapi-MODULE.EXT: qmp-commands.[ch] become qapi-commands.[ch], qapi-event.[ch] become qapi-events.[ch], and qmp-introspect.[ch] become qapi-introspect.[ch]. This gets rid of the temporary hacks in scripts/qapi/commands.py, scripts/qapi/events.py, and scripts/qapi/common.py. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-28-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> [eblake: Fix trailing dot in tpm.c, undo temporary hack for OSX toolchain] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-01cryptodev-vhost-user: set the key lengthGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev-vhost-user: add crypto session handlerGonglei
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side support crypto operation in cryptodev host-user backend. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev: add vhost supportGonglei
Impliment the vhost-crypto's funtions, such as startup, stop and notification etc. Introduce an enum QCryptoCryptoDevBackendOptionsType in order to identify the cryptodev vhost backend is vhost-user or vhost-kernel-module (If exist). At this point, the cryptdoev-vhost-user works. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev: add vhost-user as a new cryptodev backendGonglei
Usage: -chardev socket,id=charcrypto0,path=/path/to/your/socket -object cryptodev-vhost-user,id=cryptodev0,chardev=charcrypto0 -device virtio-crypto-pci,id=crypto0,cryptodev=cryptodev0 Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-19mem: add share parameter to memory-backend-ramMarcel Apfelbaum
Currently only file backed memory backend can be created with a "share" flag in order to allow sharing guest RAM with other processes in the host. Add the "share" flag also to RAM Memory Backend in order to allow remapping parts of the guest RAM to different host virtual addresses. This is needed by the RDMA devices in order to remap non-contiguous QEMU virtual addresses to a contiguous virtual address range. Moved the "share" flag to the Host Memory base class, modified phys_mem_alloc to include the new parameter and a new interface memory_region_init_ram_shared_nomigrate. There are no functional changes if the new flag is not used. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-02-09Drop superfluous includes of qapi/qmp/qerror.hMarkus Armbruster
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-6-armbru@redhat.com>
2018-02-09Drop superfluous includes of qapi-types.h and test-qapi-types.hMarkus Armbruster
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-4-armbru@redhat.com>
2018-02-07Add memfd based hostmemMarc-André Lureau
Add a new memory backend, similar to hostmem-file, except that it doesn't need to create files. It also enforces memory sealing. This backend is mainly useful for sharing the memory with other processes. Note that Linux supports transparent huge-pages of shmem/memfd memory since 4.8. It is relatively easier to set up THP than a dedicate hugepage mount point by using "madvise" in /sys/kernel/mm/transparent_hugepage/shmem_enabled. Since 4.14, memfd allows to set hugetlb requirement explicitly. Pending for merge in 4.16 is memfd sealing support for hugetlb backed memory. Usage: -object memory-backend-memfd,id=mem1,size=1G Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180201132757.23063-5-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-29tpm: report backend request errorMarc-André Lureau
Use an Error** for request to let the caller handle error reporting. This will also allow to inform the frontend of a backend error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: replace GThreadPool with AIO threadpoolMarc-André Lureau
The TPM backend uses a GThreadPool to handle IO in a seperate thread. However, GThreadPool isn't integrated with Qemu main loops, making it unnecessarily complicated to deal with. Qemu has a AIO threadpool, that is better integrated with loops and various IO functions, provides completion BH by default etc. Remove the only user of GThreadPool from qemu, use AIO threadpool. Note that the backend: - no longer accepts queing multiple requests (unneeded so far) - increase ref to itself when handling a command, for extra safety - tpm_backend_thread_end() is renamed tpm_backend_finish_sync() and will wait for completion of BH (request_completed), which will help migration handling. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-19hostmem-file: add "align" optionHaozhong Zhang
When mmap(2) the backend files, QEMU uses the host page size (getpagesize(2)) by default as the alignment of mapping address. However, some backends may require alignments different than the page size. For example, mmap a device DAX (e.g., /dev/dax0.0) on Linux kernel 4.13 to an address, which is 4K-aligned but not 2M-aligned, fails with a kernel message like [617494.969768] dax dax0.0: qemu-system-x86: dax_mmap: fail, unaligned vma (0x7fa37c579000 - 0x7fa43c579000, 0x1fffff) Because there is no common approach to get such alignment requirement, we add the 'align' option to 'memory-backend-file', so that users or management utils, which have enough knowledge about the backend, can specify a proper alignment via this option. Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Message-Id: <20171211072806.2812-2-haozhong.zhang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [ehabkost: fixed typo, fixed error_setg() format string] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-12-14tpm: tpm_emulator: get and set buffer size of deviceStefan Berger
Convert the tpm_emulator backend to get the current buffer size of the external device and set it to the buffer size that the frontend (TIS) requests. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm: Move getting TPM buffer size to backendsStefan Berger
Rather than setting the size of the TPM buffer in the front-end, query the backend for the size of the buffer. In this patch we just move the hard-coded buffer size of 4096 to the backends. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm-be: update optional function pointersMarc-André Lureau
QEMU code doesn't generally have assert() for mandatory callbacks/function pointers, probably because the crash is pretty obvious. Document the methods instead of going into the code. Make get_tpm_options() mandatory to implement (since all backend implementation have it). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm: remove unused opened codeMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-be: ask model to the TPM interfaceMarc-André Lureau
No need to store the mode in the backend, or to let the frontend set it itself. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-be: report error instead of front-endMarc-André Lureau
Backend can give more accurate error description, and lift out the job from the frontend. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-be: call request_completed() out of threadMarc-André Lureau
Lift from the backend implementation the responsability to call the request_completed() callback outside of thread context. This also simplify frontend/interface work, as they no longer need to care whether the callback is called from a different thread. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-backend: store TPMIf interface, improve backend_init()Marc-André Lureau
Store the TPM interface, the actual object may be different from TPMState. Keep a reference on the interface, and check the backend wasn't already initialized. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm: move TpmIf in include/sysemu/tpm.hMarc-André Lureau
This is a better location than hw/tpm, since we are going to use the interface from outside hw/tpm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm: move recv_data_callback to TPM interfaceMarc-André Lureau
Simplify the TPM backend setup, move callback to TPM interface. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 08:28:31 +0000